Radiation effects in a glass-ceramic (Zerodur)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koumvakalis, N.; Jani, M.G.; Halliburton, L.E.

1985-04-01

Zerodur is a low-expansion glass-ceramic with important applications in laser-gyro guidance systems. The material contains by weight 70-75% crystalline quartz in the form of crystallites approximately 50 nm in diameter which are embedded in a glass matrix. The glass-crystal ratio is adjusted so that the resultant expansion coefficient at room temperature is near zero. Ionizing radiation causes numerous effects in Zerodur. The most obvious is a change in the optical absorption, and this will have possible consequences in the thermal expansion behavior. Thus, characterization of radiation-induced defects will help solve problems affecting Zerodur's performance in guidance systems and will providemore » an understanding of the basic properties of this unique class of materials.« less

Strength of Zerodur® for mirror applications

NASA Astrophysics Data System (ADS)

Béhar-Lafenêtre, S.; Cornillon, Laurence; Ait-Zaid, Sonia

2015-09-01

Zerodur® is a well-known glass-ceramic used for optical components because of its unequalled dimensional stability under thermal environment. In particular it has been used since decades in Thales Alenia Space's optical payloads for space telescopes, especially for mirrors. The drawback of Zerodur® is however its quite low strength, but the relatively small size of mirrors in the past had made it unnecessary to further investigate this aspect, although elementary tests have always shown higher failure strength. As performance of space telescopes is increasing, the size of mirrors increases accordingly, and an optimization of the design is necessary, mainly for mass saving. Therefore the question of the effective strength of Zerodur® has become a real issue. Thales Alenia Space has investigated the application of the Weibull law and associated size effects on Zerodur® in 2014, under CNES funding, through a thorough test campaign with a high number of samples (300) of various types. The purpose was to accurately determine the parameters of the Weibull law for Zerodur® when machined in the same conditions as mirrors. The proposed paper will discuss the obtained results, in the light of the Weibull theory. The applicability of the 2-parameter and 3-parameter (with threshold strength) laws will be compared. The expected size effect has not been evidenced therefore some investigations are led to determine the reasons of this result, from the test implementation quality to the data post-processing methodology. However this test campaign has already provided enough data to safely increase the allowable value for mirrors sizing.

37 CFR 2.194 - Identification of trademark application or registration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... applicant, and the mark. (2) A letter about a registered trademark should identify the registration number... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Identification of trademark application or registration. 2.194 Section 2.194 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND...

Microscopic morphology evolution during ion beam smoothing of Zerodur® surfaces.

PubMed

Liao, Wenlin; Dai, Yifan; Xie, Xuhui; Zhou, Lin

2014-01-13

Ion sputtering of Zerodur material often results in the formation of nanoscale microstructures on the surfaces, which seriously influences optical surface quality. In this paper, we describe the microscopic morphology evolution during ion sputtering of Zerodur surfaces through experimental researches and theoretical analysis, which shows that preferential sputtering together with curvature-dependent sputtering overcomes ion-induced smoothing mechanisms leading to granular nanopatterns formation in morphology and the coarsening of the surface. Consequently, we propose a new method for ion beam smoothing (IBS) of Zerodur optics assisted by deterministic ion beam material adding (IBA) technology. With this method, Zerodur optics with surface roughness down to 0.15 nm root mean square (RMS) level is obtained through the experimental investigation, which demonstrates the feasibility of our proposed method.

Zerodur polishing process for high surface quality and high efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesar, A.; Fuchs, B.

1992-08-01

Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of

19 CFR 148.55 - Exemption for articles bearing American trademark.

Code of Federal Regulations, 2010 CFR

2010-04-01

... registered with the U.S. Patent and Trademark Office and recorded with Customs. The exemption may be applied... 19 Customs Duties 2 2010-04-01 2010-04-01 false Exemption for articles bearing American trademark... § 148.55 Exemption for articles bearing American trademark. (a) Application of exemption. An exemption...

External Data and Attribute Hyperlink Programs for Promis*e(Registered Trademark)

NASA Technical Reports Server (NTRS)

Derengowski, Rich; Gruel, Andrew

2001-01-01

External Data and Attribute Hyperlink are computer programs that can be added to Promis*e(trademark) which is a commercial software system that automates routine tasks in the design (including drawing schematic diagrams) of electrical control systems. The programs were developed under the Stennis Space Center's (SSC) Dual Use Technology Development Program to provide capabilities for SSC's BMCS configuration management system which uses Promis*e(trademark). The External Data program enables the storage and management of information in an external database linked to a drawing. Changes can be made either in the database or on the drawing. Information that originates outside Promis*e(trademark) can be stored in custom fields that can be added to the database. Although this information is not available in Promis*e(trademark) printed drawings, it can be associated with symbols in the drawings, and can be retrieved through the drawings when the software is running. The Attribute Hyperlink program enables the addition of hyperlink information as attributes of symbols. This program enables the formation of a direct hyperlink between a schematic diagram and an Internet site or a file on a compact disk, on the user's hard drive, or on another computer on a network to which the user's computer is connected. The user can then obtain information directly related to the part (e.g., maintenance, or troubleshooting information) associated with the hyperlink.

37 CFR 2.99 - Application to register as concurrent user.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Application to register as concurrent user. 2.99 Section 2.99 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK... Proceedings § 2.99 Application to register as concurrent user. (a) An application for registration as a lawful...

Effects of Heating on Teflon(Registered Trademark) FEP Thermal Control Material from the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

deGroh, Kim; Gaier, James R.; Hall, Rachelle L.; Norris, Mary Jo; Espe, Matthew P.; Cato, Daveen R.

1999-01-01

Metallized Teflon(Registered Trademark) FEP (fluorinated ethylene propylene) thermal control material on the Hubble Space Telescope (HST) is degrading in the space environment. Teflon(Registered Trademark) FEP thermal control blankets (space-facing FEP) retrieved during the first servicing mission (SM1) were found to be embrittled on solar facing surfaces and contained microscopic cracks. During the second servicing mission (SM2) astronauts noticed that the FEP outer layer of the multi-layer insulation (MLI) covering the telescope was cracked in many locations around the telescope. Large cracks were observed on the light shield, forward shell and equipment bays. A tightly curled piece of cracked FEP from the light shield was retrieved during SM2 and was severely embrittled, as witnessed by ground testing. A Failure Review Board (FRB) was organized to determine the mechanism causing the MLI degradation. Density, x-ray crystallinity and solid state nuclear magnetic resonance (NMR) analyses of FEP retrieved during SM1 were inconsistent with results of FEP retrieved during SM2. Because the retrieved SM2 material curled while in space, it experienced a higher temperature extreme during thermal cycling, estimated at 200 C, than the SM1 material, estimated at 50 C. An investigation on the effects of heating pristine and FEP exposed on HST was therefore conducted. Samples of pristine. SM1, and SM2 FEP were heated to 200 C and evaluated for changes in density and morphology. Elevated temperature exposure was found to have a major impact on the density of the retrieved materials. Characterization of polymer morphology of as-received and heated FEP samples by NMR provided results that were consistent with the density results. These findings have provided insight to the damage mechanisms of FEP in the space environment.

ZERODUR 4-m blank surviving up to 20 g acceleration

NASA Astrophysics Data System (ADS)

Westerhoff, Thomas; Werner, Thomas; Gehindy, Thorsten

2017-09-01

The glass ceramic ZERODUR developed as astronomical telescope mirror substrate material has been widely used in many telescopes due to its excellent small coefficient of thermal expansion. Many large and medium sized mirror substrate blanks have been delivered in the almost 50 years of ZERODUR business so far. Packaging and transportation of mirror substrates of 4 to 8 m in diameter with a weight between 3 and 20 tons requires special attention and sophisticated skills to successful deliver the blanks to their destination at polishing shops all over the world. Typically, a combination of road and sea transport needs to be organized. The requirements on the transport container are depending on the transport route and may vary from destination to destination. In any case the container needs to be able to sufficiently support the multi ton ZERODUR blank to avoid breaking under gravity. Additionally, the configuration needs to be able to absorb shocks happening during transport and loading between truck trailer and ship. For insurance reasons the transport container is always equipped with a GPS trackable shock recorder allowing to download the recorded accelerations on the container and the blank throughout the entire journey. This paper reports on the event of a 4 m class ZERODUR blank exposed to shocks up to 20 g during transport. The event will be discussed in detail together with lessons learned to avoid such events for future transports. Additionally, the 20 g acceleration will be discussed in respect to the data on bending strength for ZERODUR ground surfaces reported in numerous papers by Peter Hartmann et.al. in the last couple of years.

Proof test diagrams for Zerodur glass-ceramic

NASA Technical Reports Server (NTRS)

Tucker, D. S.

1991-01-01

Proof test diagrams for Zerodur glass-ceramics are calculated from available fracture mechanics data. It is shown that the environment has a large effect on minimum time-to-failure as predicted by proof test diagrams.

Highly light-weighted ZERODUR mirror and fixation for cryogenic applications

NASA Astrophysics Data System (ADS)

Behar-Lafenetre, Stephanie; Lasic, Thierry; Viale, Roger; Ruch, Eric

2017-11-01

Space telescopes require large primary mirrors within a demanding thermal environment: observatories at L2 orbit provide a stable environment with a drawback of very low temperature. Besides, it is necessary to limit as far as possible the mirrors mass while withstanding launch loads and keeping image quality within a cryogenic environment. ZERODUR is a well-known material extensively used for large telescope. Alcatel Alenia Space and Sagem/REOSC have combined their respective skills to go further in the lightweighting ratio of large mirror (36 kg/m2 on 1.5 m2) through a detailed design, performance assessment and technology demonstration with breadboards. Beyond on a large mirror detailed design supported by analysis, a ZERODUR mock-up has been manufacturing by Sagem/REOSC to demonstrate the achievability of the demanding parameters offering this high lightweighting ratio. Through the ISO experience on mirror attachments, a detailed design of the mirror fixation has been done as well. A full size mock-up has been manufactured and successfully tested under thermal cycling and static loading. Eventually, the ZERODUR stability behavior within this large temperature range has been verified through thermal cycling and image quality cryotest on a flat mirror breadboard. These developments demonstrate that ZERODUR is a good candidate for large space cryogenic mirrors offering outstanding optical performances associated to matured and proven technology and manufacturing process.

19 CFR 133.22 - Restrictions on importation of articles bearing copying or simulating trademarks.

Code of Federal Regulations, 2010 CFR

2010-04-01

... copying or simulating trademarks. 133.22 Section 133.22 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Importations Bearing Registered and/or Recorded Trademarks or Recorded Trade Names § 133.22 Restrictions on...

37 CFR 10.11 - Removing names from the register.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Removing names from the register. 10.11 Section 10.11 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE PATENT AND TRADEMARK OFFICE § 10.11 Removing names...

37 CFR 10.11 - Removing names from the register.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Removing names from the register. 10.11 Section 10.11 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE PATENT AND TRADEMARK OFFICE § 10.11 Removing names...

37 CFR 10.11 - Removing names from the register.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Removing names from the register. 10.11 Section 10.11 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE PATENT AND TRADEMARK OFFICE § 10.11 Removing names...

State of the Art and Future Directions for the Atomic Hydrogen Maser

DTIC Science & Technology

1990-12-01

5 x lo4 O C Materials such as Zerodur ,8 Cer-Vit,9 and ULElO are available that have comparable values of thermal coefficients1* but this is not...masers do not compete with cesium beam devices as a primary stan- dxrds. The advent of trapped atoms and ions cooled by laser interactions has led to...proceedings. 8 Zerodur is a trademark of Schott Glasswork, Inc. 9 Cer-Vit is a trademark of Owens-Illinois, Inc. W is a .trademark of Coming, Inc. E.M

Lightweight ZERODUR: Validation of Mirror Performance and Mirror Modeling Predictions

NASA Technical Reports Server (NTRS)

Hull, Tony; Stahl, H. Philip; Westerhoff, Thomas; Valente, Martin; Brooks, Thomas; Eng, Ron

2017-01-01

Upcoming spaceborne missions, both moderate and large in scale, require extreme dimensional stability while relying both upon established lightweight mirror materials, and also upon accurate modeling methods to predict performance under varying boundary conditions. We describe tests, recently performed at NASA's XRCF chambers and laboratories in Huntsville Alabama, during which a 1.2 m diameter, f/1.2988% lightweighted SCHOTT lightweighted ZERODUR(TradeMark) mirror was tested for thermal stability under static loads in steps down to 230K. Test results are compared to model predictions, based upon recently published data on ZERODUR(TradeMark). In addition to monitoring the mirror surface for thermal perturbations in XRCF Thermal Vacuum tests, static load gravity deformations have been measured and compared to model predictions. Also the Modal Response(dynamic disturbance) was measured and compared to model. We will discuss the fabrication approach and optomechanical design of the ZERODUR(TradeMark) mirror substrate by SCHOTT, its optical preparation for test by Arizona Optical Systems (AOS). Summarize the outcome of NASA's XRCF tests and model validations

Subsurface damage in precision ground ULE(R) and Zerodur(R) surfaces.

PubMed

Tonnellier, X; Morantz, P; Shore, P; Baldwin, A; Evans, R; Walker, D D

2007-09-17

The total process cycle time for large ULE((R)) and Zerodur((R))optics can be improved using a precise and rapid grinding process, with low levels of surface waviness and subsurface damage. In this paper, the amounts of defects beneath ULE((R)) and Zerodur((R) )surfaces ground using a selected grinding mode were compared. The grinding response was characterised by measuring: surface roughness, surface profile and subsurface damage. The observed subsurface damage can be separated into two distinct depth zones, which are: 'process' and 'machine dynamics' related.

X-ray induced damage observations in ZERODUR mirrors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takacs, P.Z.; Furenlid, K.; Furenlid, L.

1997-07-01

Catastrophic damage has been observed in some ZERODUR mirrors used as first mirrors in two beam lines at the National Synchrotron Light Source (NSLS). Despite the high reflectivity of the coatings used on these mirrors, a significant flux of high energy photons penetrates below the coating and is absorbed in the substrate. Although model calculations indicate that the local temperature does not increase significantly, the authors suspect that over long time periods the absorbed flux produces structural changes in the material, leading to a build-up of surface stress, gross figure changes, and growth of fractures. These changes are probably relatedmore » to the nature of the two-phase glass-ceramic composition of the ZERODUR material. Metal mirrors and single-phase materials do not exhibit such catastrophic damage under similar exposure conditions.« less

Advanced Mirror Technology Development (AMTD): Year Five Status

NASA Technical Reports Server (NTRS)

Stahl, H Philip

2017-01-01

The Advanced Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort initiated in Fiscal Year (FY) 2012, to mature the Technology Readiness Level (TRL) of critical technologies required to enable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics, ultra-high-contrast observations of exoplanets, and National Interest missions. Key accomplishments of 2016/17 include the completion of the Harris Corp approximately 150 Hz 1.5-meter Ultra-Low Expansion (ULE Registered trademark) mirror substrate using stacked core method to demonstrate lateral stability of the stacked core technology, as well as the characterization and validation by test of the mechanical and thermal performance of the 1.2-meter Zerodur (Registered trademark) mirror using the STOP model prediction and verification of CTE homogeneity.

37 CFR 2.158 - Reregistration of marks registered under Acts of 1881, 1905, and 1920.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Reregistration of marks registered under Acts of 1881, 1905, and 1920. 2.158 Section 2.158 Patents, Trademarks, and Copyrights UNITED..., 1905, and 1920. Trademarks registered under the Act of 1881, the Act of 1905 or the Act of 1920 may be...

Highly light-weighted ZERODUR mirrors

NASA Astrophysics Data System (ADS)

Behar-Lafenetre, Stéphanie; Lasic, Thierry; Viale, Roger; Mathieu, Jean-Claude; Ruch, Eric; Tarreau, Michel; Etcheto, Pierre

2017-11-01

Due to more and more stringent requirements for observation missions, diameter of primary mirrors for space telescopes is increasing. Difficulty is then to have a design stiff enough to be able to withstand launch loads and keep a reasonable mass while providing high opto-mechanical performance. Among the possible solutions, Thales Alenia Space France has investigated optimization of ZERODUR mirrors. Indeed this material, although fragile, is very well mastered and its characteristics well known. Moreover, its thermo-elastic properties (almost null CTE) is unequalled yet, in particular at ambient temperature. Finally, this material can be polished down to very low roughness without any coating. Light-weighting can be achieved by two different means : either optimizing manufacturing parameters or optimizing design (or both). Manufacturing parameters such as walls and optical face thickness have been improved and tested on representative breadboards defined on the basis of SAGEM-REOSC and Thales Alenia Space France expertise and realized by SAGEM-REOSC. In the frame of CNES Research and Technology activities, specific mass has been decreased down to 36 kg/m2. Moreover SNAP study dealt with a 2 m diameter primary mirror. Design has been optimized by Thales Alenia Space France while using classical manufacturing parameters - thus ensuring feasibility and costs. Mass was decreased down to 60 kg/m2 for a gravity effect of 52 nm. It is thus demonstrated that high opto-mechanical performance can be guaranteed with large highly lightweighted ZERODUR mirrors.

Effects of water on the strength of Zerodur

NASA Technical Reports Server (NTRS)

Tucker, Dennis S.; Setzer, Andrew

1991-01-01

An experimental design matrix was constructed to determine the effects of time and temperature water soak on the strength of Zerodur glass-ceramic. It was found that strength does increase in a nonlinear manner which is consistent with existing theories of crack tip blunting and residual stress reduction.

19 CFR 133.22 - Restrictions on importation of articles bearing copying or simulating trademarks.

Code of Federal Regulations, 2011 CFR

2011-04-01

... copying or simulating trademarks. 133.22 Section 133.22 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... Importations Bearing Registered and/or Recorded Trademarks or Recorded Trade Names § 133.22 Restrictions on... be denied entry and subject to detention as provided in § 133.25. (c) Relief from detention of...

Bluetooth(Registered Trademark) Heart Rate Monitors for Spaceflight

NASA Technical Reports Server (NTRS)

Buxton, Roxanne E.; West, Michael R.; Kalogera, Kent L.; Hanson, Andrea M.

2016-01-01

ISS Bluetooth validation study, because it simultaneously transmits Magnetic Pulse which is integrated with existing exercise hardware on ISS. The simultaneous data streams allow for beat to beat comparison between the current ISS standard and CS2.Upon Bluetooth(Registered Trademark) validation aboard ISS, down select of a new BT_HRM for operational use will be made.

Updated fracture incidence rates for the US version of FRAX (registered trademark)

USDA-ARS?s Scientific Manuscript database

Evaluation of results produced by the US version of FRAX (trademarked) indicates that this tool overestimates the likelihood of major osteoporotic fracture. In an attempt to correct this, we updated underlying baseline fracture rates for the model. We used US hospital discharge data from 2006 to ca...

Super-polishing of Zerodur aspheres by means of conventional polishing technology

NASA Astrophysics Data System (ADS)

Polak, Jaroslav; Klepetková, Eva; Pošmourný, Josef; Šulc, Miroslav; Procháska, František; Tomka, David; Matoušek, Ondřej; Poláková, Ivana; Šubert, Eduard

2015-01-01

This paper describes a quest to find simple technique to superpolish Zerodur asphere (55μm departure from best fit sphere) that could be employed on old fashion way 1-excenter optical polishing machine. The work focuses on selection of polishing technology, study of different polishing slurries and optimization of polishing setup. It is demonstrated that either by use of fine colloidal CeO2 slurry or by use of bowl-feed polishing setup with CeO2 charged pitch we could reach 0.4nm RMS roughness while removing <30nm of surface layer. This technique, although not optimized, was successfully used to improve surface roughness on already prepolished Zerodur aspheres without necessity to involve sophisticated super-polishing technology and highly trained manpower.

37 CFR 7.28 - Replacement of U.S. registration by registered extension of protection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Replacement of U.S. registration by registered extension of protection. 7.28 Section 7.28 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN FILINGS PURSUANT...

ZERODUR expanding capabilities and capacity for future spaceborne and ground-based telescopes

NASA Astrophysics Data System (ADS)

Westerhoff, Thomas; Werner, Thomas

2017-09-01

The glass ceramic ZERODUR is well known for its extremely low coefficient of thermal expansion making it one of the key materials for ultra-precision application such as IC and LCD Lithography, High-end Metrology, Aviation and space borne or ground based Astronomy. The steady growth of demand for more precision in those applications together with a growing number of precision systems and components is requesting the ability to on hand increase precision in manufacturing. Additionally, there is a need to increase production capacity of ZERODUR CNC machined products in parallel. This paper reports on the measures SCHOTT is realizing to feed the continuously increasing demand on high precision material and components. Next to a second melting tank additional capacity is going to be installed along the entire value stream of ZERODUR production. Features of new CNC machining capabilities in the two and four meter class will be reported allowing to provide tighter tolerance on mirror surface figure together with reduced sub surface damage in order to accelerate the polishing time. Examples are discussed such as the 4 m class secondary and tertiary mirrors for the ESO E-ELT. The new equipment will enable SCHOTT to light weight 4 m class mirror substrates for future space optics demand.

Applying Strategic Visualization(Registered Trademark) to Lunar and Planetary Mission Design

NASA Technical Reports Server (NTRS)

Frassanito, John R.; Cooke, D. R.

2002-01-01

NASA teams, such as the NASA Exploration Team (NEXT), utilize advanced computational visualization processes to develop mission designs and architectures for lunar and planetary missions. One such process, Strategic Visualization (trademark), is a tool used extensively to help mission designers visualize various design alternatives and present them to other participants of their team. The participants, which may include NASA, industry, and the academic community, are distributed within a virtual network. Consequently, computer animation and other digital techniques provide an efficient means to communicate top-level technical information among team members. Today,Strategic Visualization(trademark) is used extensively both in the mission design process within the technical community, and to communicate the value of space exploration to the general public. Movies and digital images have been generated and shown on nationally broadcast television and the Internet, as well as in magazines and digital media. In our presentation will show excerpts of a computer-generated animation depicting the reference Earth/Moon L1 Libration Point Gateway architecture. The Gateway serves as a staging corridor for human expeditions to the lunar poles and other surface locations. Also shown are crew transfer systems and current reference lunar excursion vehicles as well as the Human and robotic construction of an inflatable telescope array for deployment to the Sun/Earth Libration Point.

Mo/Si and Mo/Be multilayer thin films on Zerodur substrates for extreme-ultraviolet lithography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mirkarimi, Paul B.; Bajt, Sasa; Wall, Mark A.

2000-04-01

Multilayer-coated Zerodur optics are expected to play a pivotal role in an extreme-ultraviolet (EUV) lithography tool. Zerodur is a multiphase, multicomponent material that is a much more complicated substrate than commonly used single-crystal Si or fused-silica substrates. We investigate the effect of Zerodur substrates on the performance of high-EUV reflectance Mo/Si and Mo/Be multilayer thin films. For Mo/Si the EUV reflectance had a nearly linear dependence on substrate roughness for roughness values of 0.06-0.36 nm rms, and the FWHM of the reflectance curves (spectral bandwidth) was essentially constant over this range. For Mo/Be the EUV reflectance was observed to decreasemore » more steeply than Mo/Si for roughness values greater than approximately 0.2-0.3 nm. Little difference was observed in the EUV reflectivity of multilayer thin films deposited on different substrates as long as the substrate roughness values were similar. (c) 2000 Optical Society of America.« less

Mo/Si and Mo/Be multilayer thin films on Zerodur substrates for extreme-ultraviolet lithography.

PubMed

Mirkarimi, P B; Bajt, S; Wall, M A

2000-04-01

Multilayer-coated Zerodur optics are expected to play a pivotal role in an extreme-ultraviolet (EUV) lithography tool. Zerodur is a multiphase, multicomponent material that is a much more complicated substrate than commonly used single-crystal Si or fused-silica substrates. We investigate the effect of Zerodur substrates on the performance of high-EUV reflectance Mo/Si and Mo/Be multilayer thin films. For Mo/Si the EUV reflectance had a nearly linear dependence on substrate roughness for roughness values of 0.06-0.36 nm rms, and the FWHM of the reflectance curves (spectral bandwidth) was essentially constant over this range. For Mo/Be the EUV reflectance was observed to decrease more steeply than Mo/Si for roughness values greater than approximately 0.2-0.3 nm. Little difference was observed in the EUV reflectivity of multilayer thin films deposited on different substrates as long as the substrate roughness values were similar.

ZERODUR thermo-mechanical modelling and advanced dilatometry for the ELT generation

NASA Astrophysics Data System (ADS)

Jedamzik, Ralf; Kunisch, Clemens; Westerhoff, Thomas

2016-07-01

Large amounts of low thermal expansion material are required for the upcoming ELT projects. The main mirror is designed using several hundreds of hexagonal 1.4 m sized mirror blanks. The M2 and M3 are monolithic 4 m class mirror blanks. The mirror blank material needs to fulfill tight requirements regarding CTE specification and homogeneity. Additionally the mirror blanks need to be dimensionally stable for more than 30 years. In particular, stress effects due to the changes in the environment shall not entail shape variation of more than 0.5 μm PV within 30 years. In 2010 SCHOTT developed a physically based model to describe the thermal and mechanical long time behavior of ZERODUR. The model enables simulation of the long time behavior of ZERODUR mirror blanks under realistic mechanical and thermal constraints. This presentation shows FEM simulation results on the long time behavior of the ELT M1, M2 and M3 mirror blanks under different loading conditions. Additionally the model results will be compared to an already 15 years lasting long time measurement of a ZERODUR sample at the German federal physical standardization institute (PTB). In recent years SCHOTT pushed the push rod dilatometer measurement technology to its limit. With the new Advanced Dilatometer CTE measurement accuracies of +- 3 ppb/K and reproducibilities of better 1 ppb/K have been achieved. The new Advanced Dilatometer exhibits excellent long time stability.

Delayed elastic effects in Zerodur at room temperature.

PubMed

Pepi, J W

1992-01-01

Continuous testing at room temperature of large optics made of Zerodur has revealed a delayed elastic effect under low stress levels during both load and recovery after removal. Using a high-performance mechanical profilometer, a delayed strain of the order of 1% is realized over a period of a few weeks. The time-dependent phenomenon is elastic and reversible, but must be accounted for in various applications of optical design.

Study of the thermal stability of Zerodur glass ceramics suitable for a scanning probe microscope frame

NASA Astrophysics Data System (ADS)

Číp, Ondřej; Šmíd, Radek; Čížek, Martin; Buchta, Zdeněk; Lazar, Josef

2012-04-01

The work presents measurements of the length stability of Zerodur glass ceramic with temperature change. Measurement of this thermal characteristic is necessary for determination of the optimal temperature at which the Zerodur glass ceramic has a coefficient of thermal expansion close to zero. The principle of the measurement is to monitor the length changes using an optical resonator with a cavity mirror spacer made from the Zerodur material to be studied. The resonator is placed inside a vacuum chamber with a temperature control. A tunable laser diode is locked to a certain optical mode of the resonator to monitor the optical frequency of this mode. A beat-note signal from optical mixing between the laser and a stabilized femtosecond frequency comb is detected and processed. The temperature dependence of the glass ceramics was determined and analyzed. The resolution of the length measurement of the experimental set-up is on the order of 0.1 nm.

ZERODUR: deterministic approach for strength design

NASA Astrophysics Data System (ADS)

Hartmann, Peter

2012-12-01

There is an increasing request for zero expansion glass ceramic ZERODUR substrates being capable of enduring higher operational static loads or accelerations. The integrity of structures such as optical or mechanical elements for satellites surviving rocket launches, filigree lightweight mirrors, wobbling mirrors, and reticle and wafer stages in microlithography must be guaranteed with low failure probability. Their design requires statistically relevant strength data. The traditional approach using the statistical two-parameter Weibull distribution suffered from two problems. The data sets were too small to obtain distribution parameters with sufficient accuracy and also too small to decide on the validity of the model. This holds especially for the low failure probability levels that are required for reliable applications. Extrapolation to 0.1% failure probability and below led to design strengths so low that higher load applications seemed to be not feasible. New data have been collected with numbers per set large enough to enable tests on the applicability of the three-parameter Weibull distribution. This distribution revealed to provide much better fitting of the data. Moreover it delivers a lower threshold value, which means a minimum value for breakage stress, allowing of removing statistical uncertainty by introducing a deterministic method to calculate design strength. Considerations taken from the theory of fracture mechanics as have been proven to be reliable with proof test qualifications of delicate structures made from brittle materials enable including fatigue due to stress corrosion in a straight forward way. With the formulae derived, either lifetime can be calculated from given stress or allowable stress from minimum required lifetime. The data, distributions, and design strength calculations for several practically relevant surface conditions of ZERODUR are given. The values obtained are significantly higher than those resulting from the two

Homogeneity of the coefficient of linear thermal expansion of ZERODUR: a review of a decade of evaluations

NASA Astrophysics Data System (ADS)

Jedamzik, Ralf; Westerhoff, Thomas

2017-09-01

The coefficient of thermal expansion (CTE) and its spatial homogeneity from small to large formats is the most important property of ZERODUR. Since more than a decade SCHOTT has documented the excellent CTE homogeneity. It started with reviews of past astronomical telescope projects like the VLT, Keck and GTC mirror blanks and continued with dedicated evaluations of the production. In recent years, extensive CTE measurements on samples cut from randomly selected single ZERODUR parts in meter size and formats of arbitrary shape, large production boules and even 4 m sized blanks have demonstrated the excellent CTE homogeneity in production. The published homogeneity data shows single ppb/K peak to valley CTE variations on medium spatial scale of several cm down to small spatial scale of only a few mm mostly at the limit of the measurement reproducibility. This review paper summarizes the results also in respect to the increased CTE measurement accuracy over the last decade of ZERODUR production.

37 CFR 2.6 - Trademark fees.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Trademark fees. 2.6 Section 2.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES § 2.6 Trademark fees. The Patent and Trademark Office...

37 CFR 2.6 - Trademark fees.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Trademark fees. 2.6 Section 2.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES § 2.6 Trademark fees. The Patent and Trademark Office...

37 CFR 2.6 - Trademark fees.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Trademark fees. 2.6 Section 2.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES § 2.6 Trademark fees. The Patent and Trademark Office...

37 CFR 2.6 - Trademark fees.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 37 Patents, Trademarks, and Copyrights 1 2014-07-01 2014-07-01 false Trademark fees. 2.6 Section 2.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES § 2.6 Trademark fees. The Patent and Trademark Office...

Study on optical polishing experiment of zerodur mirror

NASA Astrophysics Data System (ADS)

Wang, Huijun; Li, Hang; Wang, Peng; Guo, Wen; Wang, Yonggang; Du, Yan; Dong, Huiwen

2014-08-01

A zerodur mirror whose aperture is 900mm is chosen to be the primary mirror of an optical system. The mirror is polished by rapid polishing and precision polishing methods relatively. The final surface figures of the mirror are as follows: the peak-to-valley value (P-V value) is 0.204λ (λ=632.8nm), and the root-mean-square value (RMS value) is 0.016λ, which meet the requirement of the optical system. The results show that the polishing process is feasible.

Trademarks: The Fingerprints of Commerce. An Educational Guide to Understanding the Importance of Trademarks.

ERIC Educational Resources Information Center

United States Patent and Trademark Office (DOC), Washington, DC.

This document explains the importance of trademark and federal registrations and presents educational ideas. The contents include: (1) "What Is a Trademark?"; (2) "A World without Trademarks?"; (3) "Procedures for Obtaining a Federal Registration"; (4) "The Rap on Trademarks"; (5) "A Note to…

Elastic hysteresis phenomena in ULE and Zerodur optical glasses at elevated temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkins, S.C.; Coon, D.N.; Epstein, J.S.

1988-01-01

Elastic hysteresis phenomena were observed in ULE and Zerodur glasses at elevated temperatures up to glass transition. These effects were found under load deformation testing using four-point bending. Permanent creep resulted in Zerodur at 900/degree/C and in ULE at 1000/degree/C. The deformation was monitored at mid-span of the samples with a capacitance-type transducer having 0.01 micrometer resolution. These hysteresis effects may be classified as elastic bimodulus between loading and unloading; that is, two different elastic moduli were observed between loading and unloading. Upon complete unloading, a minimal deformation state promptly returned, indicating little or no viscoelastic creep. The hysteresis effectmore » may be attributed to a change in glass structure as a function of stress state. A description of the test apparatus and procedure, test results for both glasses at several elevated temperatures, and an elementary discussion of continuum theory of constitutive behavior are included. 6 refs., 9 figs.« less

Dynamic fatigue testing of Zerodur glass-ceramic

NASA Technical Reports Server (NTRS)

Tucker, Dennis S.

1988-01-01

The inherent brittleness of glass invariably leads to a large variability in strength data and a time dependence in strength. Leading rate plays a large role in strength values. Glass is found to be weaker when supporting loads over long periods of time as compared to glass which undergoes rapid leading. These properties complicate the structural design allowables for the utilization of glass components in an application such as Advanced X-ray Astrophysics Facility (AXAF). The test methodology to obtain parameters which can be used to predict the reliability and life time of Zerodur glass-ceramic which is to be used for the mirrors in the AXAF is described.

Friction Stir Weld Inspection Through Conductivity Imaging Using Shaped Field MWM(Registered Trademark) - Arrays

NASA Technical Reports Server (NTRS)

Goldfine, Neil; Grundy, David; Zilberstein, Vladimir; Kinchen, David G.; McCool, Alex (Technical Monitor)

2002-01-01

Friction Stir Welds (FSW) of Al 2195-T8 and Al 2219-T8, provided by Lockheed Martin Michoud Operations, were inspected for lack-of-penetration (LOP) defects using a custom designed MWM-Array, a multi-element eddy-current sensor. MWM (registered trademark) electrical conductivity mapping demonstrated high sensitivity to LOP as small as 0.75 mm (0.03 in.), as confirmed by metallographic data that characterized the extent of LOP defects. High sensitivity and high spatial resolution was achieved via a 37-element custom designed MWM-Array allowing LOP detection using the normalized longitudinal component of the MWM measured conductivity. This permitted both LOP detection and correlation of MWM conductivity features with the LOP defect size, as changes in conductivity were apparently associated with metallurgical features within the near-surface layer of the LOP defect zone. MWM conductivity mapping reveals information similar to macro-etching as the MWM-Array is sensitive to small changes in conductivity due to changes in microstructure associated with material thermal processing, in this case welding. The electrical conductivity measured on the root side of FSWs varies across the weld due to microstructural differences introduced by the FSW process, as well as those caused by planar flaws. Weld metal, i.e., dynamically recrystallized zone (DXZ), thermomechanically affected zone (TMZ), heat-affected zone (HAZ), and parent metal (PM) are all evident in the conductivity maps. While prior efforts had met with limited success for NDE (Nondestructive Evaluation) of dissimilar alloy, Al2219 to Al2195 FSW, the new custom designed multi-element MWM-Array achieved detection of all LOP defects even in dissimilar metal welds.

37 CFR 2.82 - Marks on Supplemental Register published only upon registration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Register published only upon registration. 2.82 Section 2.82 Patents, Trademarks, and Copyrights UNITED... Publication and Post Publication § 2.82 Marks on Supplemental Register published only upon registration. In... published for opposition but if it appears, after examination or reexamination, that the applicant is...

37 CFR 1.1 - Addresses for non-trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Addresses for non-trademark correspondence with the United States Patent and Trademark Office. 1.1 Section 1.1 Patents, Trademarks, and... PATENT CASES General Provisions General Information and Correspondence § 1.1 Addresses for non-trademark...

37 CFR 1.1 - Addresses for non-trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Addresses for non-trademark correspondence with the United States Patent and Trademark Office. 1.1 Section 1.1 Patents, Trademarks, and... PATENT CASES General Provisions General Information and Correspondence § 1.1 Addresses for non-trademark...

Use of LS-DYNA(Registered TradeMark) to Assess the Energy Absorption Performance of a Shell-Based Kevlar(TradeMark)/Epoxy Composite Honeycomb

NASA Technical Reports Server (NTRS)

Polanco, Michael

2010-01-01

The forward and vertical impact stability of a composite honeycomb Deployable Energy Absorber (DEA) was evaluated during a full-scale crash test of an MD-500 helicopter at NASA Langley?s Landing and Impact Research Facility. The lower skin of the helicopter was retrofitted with DEA components to protect the airframe subfloor upon impact and to mitigate loads transmitted to Anthropomorphic Test Device (ATD) occupants. To facilitate the design of the DEA for this test, an analytical study was conducted using LS-DYNA(Registered TradeMark) to evaluate the performance of a shell-based DEA incorporating different angular cell orientations as well as simultaneous vertical and forward impact conditions. By conducting this study, guidance was provided in obtaining an optimum design for the DEA that would dissipate the kinetic energy of the airframe while maintaining forward and vertical impact stability.

Delayed elastic effects in the glass ceramics Zerodur and ULE at room temperature.

PubMed

Pepi, J W; Golini, D

1991-08-01

The time-dependent phenomenon of delayed elasticity was studied at room temperature and is presented here for Zerodur and ULE. The effect is believed to be related to the alkali oxide content of the glass and to the rearrangement of the ion groups within the structure during stress.

Fracture toughness and crack growth of Zerodur

NASA Technical Reports Server (NTRS)

Viens, Michael J.

1990-01-01

The fracture toughness and crack growth parameters of Zerodur, a low expansion glass ceramic material, were determined. The fracture toughness was determined using indentation techniques and was found to be 0.9 MPa x m(sup 1/2). The crack growth parameters were determined using indented biaxial specimens subjected to static and dynamic loading in an aqueous environment. The crack growth parameters n and 1n(B) were found to be 30.7 and -6.837, respectively. The crack growth parameters were also determined using indented biaxial specimens subjected to dynamic loading in an ambient 50 percent relative humidity environment. The crack growth parameters n and 1n(B) at 50 percent relative humidity were found to be 59.3 and -17.51, respectively.

Chemical Warfare Agent Decontamination Efficacy Testing Large-Scale Chamber mVHP (registered trademerk) Decontamination System Evaluation

DTIC Science & Technology

2010-02-01

APPENDIXES A. COUPON STOCK MATERIAL AND PREPARATION 141 B. CONTROL CHARTS 143 C. ANALYTICAL INSTRUMENTATION PARAMETERS 171 D. COUPON CHAIN-OF...were cut from stock material. Vitron® is a registered trademark of Vitron Manufacturing, Phoenix, AZ Kapton® is a register trademark of E.I. DuPont... Eft Wipe Wipe Ext. Eff. 15M 15M 15M 15M 0 300 600 0 4/4 5/5 5/5 4/4 3,740,999 ± 2,377,014 135876 ±51295 50896 ± 38227 120004 ±8130

37 CFR 1.1 - Addresses for non-trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2012 CFR

2012-07-01

... correspondence with the United States Patent and Trademark Office. 1.1 Section 1.1 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... correspondence with the United States Patent and Trademark Office. (a) In general. Except as provided in...

37 CFR 1.1 - Addresses for non-trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2014 CFR

2014-07-01

... correspondence with the United States Patent and Trademark Office. 1.1 Section 1.1 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... correspondence with the United States Patent and Trademark Office. (a) In general. Except as provided in...

37 CFR 1.1 - Addresses for non-trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2013 CFR

2013-07-01

... correspondence with the United States Patent and Trademark Office. 1.1 Section 1.1 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... correspondence with the United States Patent and Trademark Office. (a) In general. Except as provided in...

Modeling the Extremely Lightweight Zerodur Mirror (ELZM) Thermal Soak Test

NASA Technical Reports Server (NTRS)

Brooks, Thomas E.; Eng, Ron; Hull, Tony; Stahl, H. Philip

2017-01-01

Exoplanet science requires extreme wavefront stability (10 pm change/10 minutes), so every source of wavefront error (WFE) must be characterized in detail. This work illustrates the testing and characterization process that will be used to determine how much surface figure error (SFE) is produced by mirror substrate materials' CTE distributions. Schott's extremely lightweight Zerodur mirror (ELZM) was polished to a sphere, mounted, and tested at Marshall Space Flight Center (MSFC) in the X-Ray and Cryogenic Test Facility (XRCF). The test transitioned the mirror's temperature from an isothermal state at 292K to isothermal states at 275K, 250K and 230K to isolate the effects of the mirror's CTE distribution. The SFE was measured interferometrically at each temperature state and finite element analysis (FEA) has been completed to assess the predictability of the change in the mirror's surface due to a change in the mirror's temperature. The coefficient of thermal expansion (CTE) distribution in the ELZM is unknown, so the analysis has been correlated to the test data. The correlation process requires finding the sensitivity of SFE to a given CTE distribution in the mirror. A novel hand calculation is proposed to use these sensitivities to estimate thermally induced SFE. The correlation process was successful and is documented in this paper. The CTE map that produces the measured SFE is in line with the measured data of typical boules of Schott's Zerodur glass.

Modeling the Extremely Lightweight Zerodur Mirror (ELZM) thermal soak test

NASA Astrophysics Data System (ADS)

Brooks, Thomas E.; Eng, Ron; Hull, Tony; Stahl, H. Philip

2017-09-01

Exoplanet science requires extreme wavefront stability (10 pm change/10 minutes), so every source of wavefront error (WFE) must be characterized in detail. This work illustrates the testing and characterization process that will be used to determine how much surface figure error (SFE) is produced by mirror substrate materials' CTE distributions. Schott's extremely lightweight Zerodur mirror (ELZM) was polished to a sphere, mounted, and tested at Marshall Space Flight Center (MSFC) in the X-Ray and Cryogenic Test Facility (XRCF). The test transitioned the mirror's temperature from an isothermal state at 292K to isothermal states at 275K, 250K and 230K to isolate the effects of the mirror's CTE distribution. The SFE was measured interferometrically at each temperature state and finite element analysis (FEA) has been completed to assess the predictability of the change in the mirror's surface due to a change in the mirror's temperature. The coefficient of thermal expansion (CTE) distribution in the ELZM is unknown, so the analysis has been correlated to the test data. The correlation process requires finding the sensitivity of SFE to a given CTE distribution in the mirror. A novel hand calculation is proposed to use these sensitivities to estimate thermally induced SFE. The correlation process was successful and is documented in this paper. The CTE map that produces the measured SFE is in line with the measured data of typical boules of Schott's Zerodur glass.

Evaluation of Material Models within LS-DYNA(Registered TradeMark) for a Kevlar/Epoxy Composite Honeycomb

NASA Technical Reports Server (NTRS)

Polanco, Michael A.; Kellas, Sotiris; Jackson, Karen

2009-01-01

The performance of material models to simulate a novel composite honeycomb Deployable Energy Absorber (DEA) was evaluated using the nonlinear explicit dynamic finite element code LS-DYNA(Registered TradeMark). Prototypes of the DEA concept were manufactured using a Kevlar/Epoxy composite material in which the fibers are oriented at +/-45 degrees with respect to the loading axis. The development of the DEA has included laboratory tests at subcomponent and component levels such as three-point bend testing of single hexagonal cells, dynamic crush testing of single multi-cell components, and impact testing of a full-scale fuselage section fitted with a system of DEA components onto multi-terrain environments. Due to the thin nature of the cell walls, the DEA was modeled using shell elements. In an attempt to simulate the dynamic response of the DEA, it was first represented using *MAT_LAMINATED_COMPOSITE_FABRIC, or *MAT_58, in LS-DYNA. Values for each parameter within the material model were generated such that an in-plane isotropic configuration for the DEA material was assumed. Analytical predictions showed that the load-deflection behavior of a single-cell during three-point bending was within the range of test data, but predicted the DEA crush response to be very stiff. In addition, a *MAT_PIECEWISE_LINEAR_PLASTICITY, or *MAT_24, material model in LS-DYNA was developed, which represented the Kevlar/Epoxy composite as an isotropic elastic-plastic material with input from +/-45 degrees tensile coupon data. The predicted crush response matched that of the test and localized folding patterns of the DEA were captured under compression, but the model failed to predict the single-cell three-point bending response.

Study on the Optimization and Process Modeling of the Rotary Ultrasonic Machining of Zerodur Glass-Ceramic

NASA Astrophysics Data System (ADS)

Pitts, James Daniel

Rotary ultrasonic machining (RUM), a hybrid process combining ultrasonic machining and diamond grinding, was created to increase material removal rates for the fabrication of hard and brittle workpieces. The objective of this research was to experimentally derive empirical equations for the prediction of multiple machined surface roughness parameters for helically pocketed rotary ultrasonic machined Zerodur glass-ceramic workpieces by means of a systematic statistical experimental approach. A Taguchi parametric screening design of experiments was employed to systematically determine the RUM process parameters with the largest effect on mean surface roughness. Next empirically determined equations for the seven common surface quality metrics were developed via Box-Behnken surface response experimental trials. Validation trials were conducted resulting in predicted and experimental surface roughness in varying levels of agreement. The reductions in cutting force and tool wear associated with RUM, reported by previous researchers, was experimentally verified to also extended to helical pocketing of Zerodur glass-ceramic.

Patent and Trademark Depository Libraries and the United States Patent and Trademark Office: A Model for Information Dissemination

ERIC Educational Resources Information Center

Jenda, Claudine Arnold

2005-01-01

This paper describes the network of Patent and Trademark Depository Libraries (PTDLs), a collaborative partnership with the United States Patent and Trademark Office (USPTO) for disseminating patent and trademark information in every state plus the District of Columbia and Puerto Rico. Typical information sources and services provided at PTDLs are…

SNRB{trademark} air toxics monitoring. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-01-01

Babcock & Wilcox (B&W) is currently conducting a project under the DOE`s Clean Coal Technology (CCT II) Program to demonstrate its SO{sub x}NO{sub x}-Rox Box{trademark} (SNRB{trademark}) process in a 5 MWe Field Demonstration Unit at Ohio Edison`s R. E. Burger Plant near Shadyside, Ohio. The objective of the SNRB{trademark} Air Toxics Monitoring Project was to provide data on SNRB{trademark} air toxics emissions control performance to B&W and to add to the DOE/EPRI/EPA data base by quantifying the flow rates of selected hazardous substances (or air toxics) in all of the major input and output streams of the SNRB{trademark} process asmore » well as the power plant. Work under the project included the collection and analysis of representative samples of all major input and output streams of the SNRB{trademark} demonstration unit and the power plant, and the subsequent laboratory analysis of these samples to determine the partitioning of the hazardous substances between the various process streams. Material balances for selected air toxics were subsequently calculated around the SNRB{trademark} and host boiler systems, including the removal efficiencies across each of the major air pollution control devices. This report presents results of the SNRB{trademark} Air Toxics Monitoring Project. In addition to the Introduction, a brief description of the test site, including the Boiler No. 8 and the SNRB{trademark} process, is included in Section H. The concentrations of air toxic emissions are presented in Section II according to compound class. Material balances are included in Section IV for three major systems: boiler, electrostatic precipitator, and SNRB{trademark}. Emission factors and removal efficiencies are also presented according to compound class in Sections V and VI, respectively. A data evaluation is provided in Section VII.« less

7 CFR 1250.542 - Patents, copyrights, trademarks, and information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Patents, copyrights, trademarks, and information... AGRICULTURE EGG RESEARCH AND PROMOTION Rules and Regulations Patents, Copyrights, Trademarks, and Information § 1250.542 Patents, copyrights, trademarks, and information. Patents, copyrights, trademarks, and...

7 CFR 1250.542 - Patents, copyrights, trademarks, and information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Patents, copyrights, trademarks, and information... AGRICULTURE EGG RESEARCH AND PROMOTION Rules and Regulations Patents, Copyrights, Trademarks, and Information § 1250.542 Patents, copyrights, trademarks, and information. Patents, copyrights, trademarks, and...

7 CFR 1250.542 - Patents, copyrights, trademarks, and information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Patents, copyrights, trademarks, and information... AGRICULTURE EGG RESEARCH AND PROMOTION Rules and Regulations Patents, Copyrights, Trademarks, and Information § 1250.542 Patents, copyrights, trademarks, and information. Patents, copyrights, trademarks, and...

7 CFR 1250.542 - Patents, copyrights, trademarks, and information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Patents, copyrights, trademarks, and information... AGRICULTURE EGG RESEARCH AND PROMOTION Rules and Regulations Patents, Copyrights, Trademarks, and Information § 1250.542 Patents, copyrights, trademarks, and information. Patents, copyrights, trademarks, and...

7 CFR 1250.542 - Patents, copyrights, trademarks, and information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Patents, copyrights, trademarks, and information... AGRICULTURE EGG RESEARCH AND PROMOTION Rules and Regulations Patents, Copyrights, Trademarks, and Information § 1250.542 Patents, copyrights, trademarks, and information. Patents, copyrights, trademarks, and...

19 CFR 133.1 - Recordation of trademarks.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Recordation of trademarks. 133.1 Section 133.1... TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.1 Recordation of... denial of an application filed in accordance with §§ 133.2, 133.5, 133.6, and 133.7 of this subpart. [T.D...

19 CFR 133.1 - Recordation of trademarks.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Recordation of trademarks. 133.1 Section 133.1... TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.1 Recordation of... denial of an application filed in accordance with §§ 133.2, 133.5, 133.6, and 133.7 of this subpart. [T.D...

Ultrastable, Zerodur-based optical benches for quantum gas experiments.

PubMed

Duncker, Hannes; Hellmig, Ortwin; Wenzlawski, André; Grote, Alexander; Rafipoor, Amir Jones; Rafipoor, Mona; Sengstock, Klaus; Windpassinger, Patrick

2014-07-10

Operating ultracold quantum gas experiments outside of a laboratory environment has so far been a challenging goal, largely due to the lack of sufficiently stable optical systems. In order to increase the thermal stability of free-space laser systems, the application of nonstandard materials such as glass ceramics is required. Here, we report on Zerodur-based optical systems which include single-mode fiber couplers consisting of multiple components jointed by light-curing adhesives. The thermal stability is thoroughly investigated, revealing excellent fiber-coupling efficiencies between 0.85 and 0.92 in the temperature range from 17°C to 36°C. In conjunction with successfully performed vibration tests, these findings qualify our highly compact systems for atom interferometry experiments aboard a sounding rocket as well as various other quantum information and sensing applications.

One-dimensional "atom" with zero-range potential perturbed by finite sequence of zero-duration laser pulses

NASA Astrophysics Data System (ADS)

Gusev, A. A.; Chuluunbaatar, O.; Popov, Yu. V.; Vinitsky, S. I.; Derbov, V. L.; Lovetskiy, K. P.

2018-04-01

The exactly soluble model of a train of zero-duration electromagnetic pulses interacting with a 1D atom with short-range interaction potential modelled by a δ-function is considered. The model is related to the up-to-date laser techniques providing the duration of pulses as short as a few attoseconds and the intensities higher than 1014 W/cm2.

On-Orbit Teflon(trademark) FEP Degradation

NASA Technical Reports Server (NTRS)

Townsend, Jacqueline A.; Hansen, Patricia A.; Dever, Joyce A.

1998-01-01

During the Hubble Space Telescope (HST) Second Servicing Mission (SM2), degradation of unsupported Teflon(trademark) FEP (fluorinated ethylene propylene), used as the outer layer of the multi-layer insulation (MLI) blankets, was evident as large cracks on the telescope light shield. A sample of the degraded outer layer was retrieved during the mission and returned to Earth for ground testing and evaluation. The results of the Teflon(trademark) FEP sample evaluation and additional testing of pristine Teflon(trademark) FEP led the investigative team to theorize that the HST damage was caused by thermal cycling with deep-layer damage from electron and proton radiation which allowed the propagation of cracks along stress concentrations, and that the damage increased with the combined total dose of electrons, protons, UV and x-rays along with thermal cycling. This paper discusses the testing and evaluation of the Teflon(trademark) FEP.

19 CFR 133.7 - Renewal of trademark recordation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Renewal of trademark recordation. 133.7 Section 133.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.7 Renewal of...

37 CFR 2.195 - Receipt of trademark correspondence.

Code of Federal Regulations, 2010 CFR

2010-07-01

... correspondence. 2.195 Section 2.195 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES General Information and Correspondence in... be given a filing date as of the date of deposit as “Express Mail” with the United States Postal...

75 FR 37380 - Trademark Trial and Appeal Board (TTAB) Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

... DEPARTMENT OF COMMERCE Patent and Trademark Office Trademark Trial and Appeal Board (TTAB) Actions ACTION: Proposed collection; comment request. SUMMARY: The United States Patent and Trademark Office... ``0651- 0040 Trademark Trial and Appeal Board (TTAB) Actions comment'' in the subject line of the message...

Improved force prediction model for grinding Zerodur based on the comprehensive material removal mechanism.

PubMed

Sun, Guoyan; Zhao, Lingling; Zhao, Qingliang; Gao, Limin

2018-05-10

There have been few investigations dealing with the force model on grinding brittle materials. However, the dynamic material removal mechanisms have not yet been sufficiently explicated through the grain-workpiece interaction statuses while considering the brittle material characteristics. This paper proposes an improved grinding force model for Zerodur, which contains ductile removal force, brittle removal force, and frictional force, corresponding to the ductile and brittle material removal phases, as well as the friction process, respectively. The critical uncut chip thickness a gc of brittle-ductile transition and the maximum uncut chip thickness a gmax of a single abrasive grain are calculated to identify the specified material removal mode, while the comparative result between a gmax and a gc can be applied to determine the selection of effective grinding force components. Subsequently, indentation fracture tests are carried out to acquire accurate material mechanical properties of Zerodur in establishing the brittle removal force model. Then, the experiments were conducted to derive the coefficients in the grinding force prediction model. Simulated through this model, correlations between the grinding force and grinding parameters can be predicted. Finally, three groups of grinding experiments are carried out to validate the mathematical grinding force model. The experimental results indicate that the improved model is capable of predicting the realistic grinding force accurately with the relative mean errors of 6.04% to the normal grinding force and 7.22% to the tangential grinding force, respectively.

37 CFR 2.27 - Pending trademark application index; access to applications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Pending trademark application index; access to applications. 2.27 Section 2.27 Patents, Trademarks, and Copyrights UNITED STATES... Registration § 2.27 Pending trademark application index; access to applications. (a) An index of pending...

78 FR 68419 - Trademark Trial and Appeal Board (TTAB) Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-14

... DEPARTMENT OF COMMERCE Patent and Trademark Office Trademark Trial and Appeal Board (TTAB) Actions ACTION: Proposed collection; comment request. SUMMARY: The United States Patent and Trademark Office (USPTO), as part of its continuing effort to reduce paperwork and respondent burden, invites the general...

19 CFR 133.5 - Change of ownership of recorded trademark.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Change of ownership of recorded trademark. 133.5 Section 133.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.5 Change...

19 CFR 133.5 - Change of ownership of recorded trademark.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Change of ownership of recorded trademark. 133.5 Section 133.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.5 Change...

On-Orbit Teflon(trademark) FEP Degradation

NASA Technical Reports Server (NTRS)

Townsend, Jacqueline; Hansen, Patricia A.; Dever, Joyce A.

1999-01-01

During the Hubble Space Telescope (HST) Second Servicing Mission (SM2), degradation of unsupported Teflon(trademark) FEP (fluorinated ethylene propylene), used as the outer layer of the multi-layer insulation (MLI) blankets, was evident as large cracks on the telescope light shield. A sample of the degraded outer layer was retrieved during the mission and returned to Earth for ground testing and evaluation. The results of the Teflon(trademark) FEP sample evaluation and additional testing of pristine Teflon FEP led the investigative team to theorize that the HST damage was caused by thermal cycling with deep-layer damage from electron and proton radiation which allowed the propagation of cracks along stress concentrations, and that the damage increased with the combined total dose of electrons, protons, UV and x-rays along with thermal cycling. This paper discusses the testing and evaluation of the Teflon(trademark) FEP.

Interferometric phase measurement of zerodur, aluminum and SXA mirrors at cryogenic temperatures

NASA Technical Reports Server (NTRS)

Magner, Thomas J.; Barney, Richard D.

1988-01-01

A research program was undertaken to determine the surface figure error of several different types of mirrors at cryogenic temperatures. Two-inch diameter parabolic, spherical and flat mirrors were fabricated from zerodur, aluminum and a metal matrix composite of silicon carbide reinforced aluminum (SXA). The ratio of silicon carbide to aluminum was selected so that the coefficient of thermal expansion (CTE) of the metal matrix matched electroless nickel. A liquuid helium dewar was modified to add an interferometric grade window, a cold electronic shutter and a strain-free copper mirror mount. Interferometric phase measurements on each mirror mounted in the dewar were made without the window, with the window, under vacuum, at around 80K and between 10K and 24K.

Future{at}Labs.Prosperity Game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, D.F.; Boyack, K.W.; Berman, M.

Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games, Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education, and research. These issues can be examined from a variety of perspectives ranging from global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Future{at}Labs.Prosperity Game{trademark} conducted under the sponsorship of the Industry Advisory Boards of the national labs, themore » national labs, Lockheed Martin Corporation, and the University of California. Players were drawn from all stakeholders involved including government, industry, labs, and academia. The primary objectives of this game were to: (1) explore ways to optimize the role of the multidisciplinary labs in serving national missions and needs; (2) explore ways to increase collaboration and partnerships among government, laboratories, universities, and industry; and (3) create a network of partnership champions to promote findings and policy options. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning the future of the labs.« less

Biomedical technology prosperity game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, M.; Boyack, K.W.; Wesenberg, D.L.

1996-07-01

Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Biomedical Technology Prosperity Game{trademark} conducted under the sponsorship of Sandia National Laboratories, the Defensemore » Advanced Research Projects Agency, and the Koop Foundation, Inc. Players were drawn from all stakeholders involved in biomedical technologies including patients, hospitals, doctors, insurance companies, legislators, suppliers/manufacturers, regulators, funding organizations, universities/laboratories, and the legal profession. The primary objectives of this game were to: (1) Identify advanced/critical technology issues that affect the cost and quality of health care. (2) Explore the development, patenting, manufacturing and licensing of needed technologies that would decrease costs while maintaining or improving quality. (3) Identify policy and regulatory changes that would reduce costs and improve quality and timeliness of health care delivery. (4) Identify and apply existing resources and facilities to develop and implement improved technologies and policies. (5) Begin to develop Biomedical Technology Roadmaps for industry and government cooperation. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning biomedical issues. Significant progress was made in the roadmapping of key areas in the biomedical technology

Industrial Hygiene Air Sampling and Bulk Sampling Instructions

DTIC Science & Technology

1990-12-01

registered trademark of Johns - Manville Products Corp., Denver, CO. "Cellosolve is a registered trademark of Union Carbide Corp., 270 Park Ave, New...registered trademark of Johns - Manville Products Corp., Denver, CO. 0 &Florisil is a registered trademark of Floridin Company, ITT System, Pittsburgh, PA. C...Thermosorb is a registered trademark of Johns - Manville Products Corp., Denver, CO. ®XAD-2 is a registered trademark of Rohm and Haas, Philadelphia, PA. C

Trademark Trends and Brand Activity in Higher Education

ERIC Educational Resources Information Center

Rooksby, Jacob H.; Collins, Christopher S.

2016-01-01

Trademarks figure prominently in college and university brand formation efforts. Trademarks are intangible rights that allow institutions to define and protect aspects of their identities important to them as they engage in markets. This multiple-method study, grounded in legal and policy research, provides a first look at how institutions are…

Delayed elasticity in Zerodur® at room temperature

NASA Astrophysics Data System (ADS)

Pepi, John W.; Golini, Donald

1991-12-01

Much has been written about structural relaxation, viscous flow, delayed elasticity, hysteresis, and other dimensional stability phenomena of glass and ceramics at elevated temperatures. Less has been documented about similar effects at room temperature. The time dependent phenomenon of delayed elasticity exhibited by Zerodur has been studied at room temperature and is presented here. Using a high-performance mechanical profilometer, a delayed strain on the order of 1 percent is realized over a period of a few weeks, under low stress levels. An independent test using optical interferometry validates the results. A comparison of Corning ULE silica glass is also made. The effect is believed to be related to the alkali oxide content of the glass ceramic and rearrangement of the ion groups within the structure during stress. The effect, apparent under externally applied load, is elastic and repeatable, that is, no hysteresis of permanent set, as measured at elevated temperature, is evidenced within measurement capabilities. Nonetheless, it must be accounted for in determining the magnitude of distortion under load (delayed elastic creep) and upon load removal (delayed elastic recovery). This is particularly important for large lightweight optics which might undergo large strain during fabrication and environmental loading, such as experienced in gravity release or in dynamic control of active optics.

Can Any Childbirth Educator Use the Lamaze Trademark?

PubMed Central

Philipsen, Nayna Campbell

2001-01-01

A Lamaze Certified Childbirth Educator asks about the use of the name Lamaze, which is a licensed (trademark) name. A trademark is a mark of authenticity. It protects both the users and the consumers. Penalty for unauthorized use (e.g., by a childbirth educator who is not an LCCE) can be substantial. PMID:17273241

37 CFR 2.67 - Suspension of action by the Patent and Trademark Office.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Patent and Trademark Office. 2.67 Section 2.67 Patents, Trademarks, and Copyrights UNITED STATES PATENT... Application and Action by Applicants § 2.67 Suspension of action by the Patent and Trademark Office. Action by the Patent and Trademark Office may be suspended for a reasonable time for good and sufficient cause...

37 CFR 2.67 - Suspension of action by the Patent and Trademark Office.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Patent and Trademark Office. 2.67 Section 2.67 Patents, Trademarks, and Copyrights UNITED STATES PATENT... Application and Action by Applicants § 2.67 Suspension of action by the Patent and Trademark Office. Action by the Patent and Trademark Office may be suspended for a reasonable time for good and sufficient cause...

37 CFR 2.67 - Suspension of action by the Patent and Trademark Office.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Patent and Trademark Office. 2.67 Section 2.67 Patents, Trademarks, and Copyrights UNITED STATES PATENT... Application and Action by Applicants § 2.67 Suspension of action by the Patent and Trademark Office. Action by the Patent and Trademark Office may be suspended for a reasonable time for good and sufficient cause...

37 CFR 2.67 - Suspension of action by the Patent and Trademark Office.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Patent and Trademark Office. 2.67 Section 2.67 Patents, Trademarks, and Copyrights UNITED STATES PATENT... Application and Action by Applicants § 2.67 Suspension of action by the Patent and Trademark Office. Action by the Patent and Trademark Office may be suspended for a reasonable time for good and sufficient cause...

37 CFR 2.67 - Suspension of action by the Patent and Trademark Office.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Patent and Trademark Office. 2.67 Section 2.67 Patents, Trademarks, and Copyrights UNITED STATES PATENT... Application and Action by Applicants § 2.67 Suspension of action by the Patent and Trademark Office. Action by the Patent and Trademark Office may be suspended for a reasonable time for good and sufficient cause...

77 FR 41172 - Trademark Board Manual of Procedure, Third Edition, Revision 1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-12

... DEPARTMENT OF COMMERCE Patent and Trademark Office [Docket No. PTO-T-2012-0028] Trademark Board Manual of Procedure, Third Edition, Revision 1 AGENCY: United States Patent and Trademark Office... not have the force and effect of law. Its guidelines have been developed as a matter of internal...

19 CFR 133.6 - Change in name of owner of recorded trademark.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Change in name of owner of recorded trademark. 133.6 Section 133.6 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.6 Change...

19 CFR 133.6 - Change in name of owner of recorded trademark.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Change in name of owner of recorded trademark. 133.6 Section 133.6 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.6 Change...

37 CFR 2.126 - Form of submissions to the Trademark Trial and Appeal Board.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Trademark Trial and Appeal Board. 2.126 Section 2.126 Patents, Trademarks, and Copyrights UNITED STATES... Inter Partes Proceedings § 2.126 Form of submissions to the Trademark Trial and Appeal Board. (a) Submissions may be made to the Trademark Trial and Appeal Board on paper where Board practice or the rules in...

19 CFR 145.55 - Trademarks, trade names, and copyrights.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Trademarks, trade names, and copyrights. 145.55 Section 145.55 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Restricted and Prohibited Merchandise § 145.55 Trademarks, trade names, and copyrights....

19 CFR 145.55 - Trademarks, trade names, and copyrights.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Trademarks, trade names, and copyrights. 145.55 Section 145.55 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Restricted and Prohibited Merchandise § 145.55 Trademarks, trade names, and copyrights....

19 CFR 145.55 - Trademarks, trade names, and copyrights.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Trademarks, trade names, and copyrights. 145.55 Section 145.55 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Restricted and Prohibited Merchandise § 145.55 Trademarks, trade names, and copyrights....

19 CFR 145.55 - Trademarks, trade names, and copyrights.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Trademarks, trade names, and copyrights. 145.55 Section 145.55 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Restricted and Prohibited Merchandise § 145.55 Trademarks, trade names, and copyrights....

Unsupervised symmetrical trademark image retrieval in soccer telecast using wavelet energy and quadtree decomposition

NASA Astrophysics Data System (ADS)

Ong, Swee Khai; Lim, Wee Keong; Soo, Wooi King

2013-04-01

Trademark, a distinctive symbol, is used to distinguish products or services provided by a particular person, group or organization from other similar entries. As trademark represents the reputation and credit standing of the owner, it is important to differentiate one trademark from another. Many methods have been proposed to identify, classify and retrieve trademarks. However, most methods required features database and sample sets for training prior to recognition and retrieval process. In this paper, a new feature on wavelet coefficients, the localized wavelet energy, is introduced to extract features of trademarks. With this, unsupervised content-based symmetrical trademark image retrieval is proposed without the database and prior training set. The feature analysis is done by an integration of the proposed localized wavelet energy and quadtree decomposed regional symmetrical vector. The proposed framework eradicates the dependence on query database and human participation during the retrieval process. In this paper, trademarks for soccer games sponsors are the intended trademark category. Video frames from soccer telecast are extracted and processed for this study. Reasonably good localization and retrieval results on certain categories of trademarks are achieved. A distinctive symbol is used to distinguish products or services provided by a particular person, group or organization from other similar entries.

31 CFR 537.522 - Certain transactions related to patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2011 CFR

2011-07-01

... following transactions in connection with patent, trademark, copyright or other intellectual property... other form of intellectual property protection; (2) The receipt of a patent, trademark, copyright or other form of intellectual property protection; (3) The renewal or maintenance of a patent, trademark...

31 CFR 537.522 - Certain transactions related to patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2010 CFR

2010-07-01

... following transactions in connection with patent, trademark, copyright or other intellectual property... other form of intellectual property protection; (2) The receipt of a patent, trademark, copyright or other form of intellectual property protection; (3) The renewal or maintenance of a patent, trademark...

31 CFR 538.514 - Certain transactions related to patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2010 CFR

2010-07-01

... following transactions in connection with patent, trademark, copyright or other intellectual property... obtain a patent, trademark, copyright or other form of intellectual property protection; (2) The receipt of a patent, trademark, copyright or other form of intellectual property protection; (3) The renewal...

31 CFR 538.514 - Certain transactions related to patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2011 CFR

2011-07-01

... following transactions in connection with patent, trademark, copyright or other intellectual property... obtain a patent, trademark, copyright or other form of intellectual property protection; (2) The receipt of a patent, trademark, copyright or other form of intellectual property protection; (3) The renewal...

Single-point diamond crushing of Zerodur with in-situ polishing and metrology on a diamond turning machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryan, J.B.; Carter, D.L.

1985-04-01

Large, complicated, aspherical optical elements of glass are presently used in many astronomical devices, both on land and in space. Grazing-incident mirrors are envisioned for use in such missions as the proposed Advanced X-Ray Astrophysical Facility (AXAF), the Far Ultraviolet Spectroscopic Explorer (FUSE), and others. These elements are very expensive to fabricate because a great deal of time and labor are required to shape a glass blank. The fabrication of these mirrors can best be achieved by applying precision machining techniques and precision machines for figuring and finishing low-expansion glasses such as Zerodur.

75 FR 69921 - Trademark Manual of Examining Procedure, Seventh Edition

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

... suggestions for improving the form and content of the TMEP be submitted via electronic mail message to [email protected] . Written comments may also be submitted by mail addressed to: Commissioner for Trademarks, P... Commissioner for Trademark Examination Policy, by electronic mail at: [email protected] ; or by mail...

76 FR 38639 - Trademark Board Manual of Procedure, Third Edition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... DEPARTMENT OF COMMERCE United States Patent and Trademark Office [Docket No. PTO-T-2011-0009..., Commerce. ACTION: Notice. SUMMARY: The United States Patent and Trademark Office (``USPTO'') issued the..., marked to the attention of Angela Lykos. Do not use the [email protected] e-mail address to submit...

The Technology Information Environment with Industry{trademark} system description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Detry, R.; Machin, G.

The Technology Information Environment with Industry (TIE-In{trademark}) provides users with controlled access to distributed laboratory resources that are packaged in intelligent user interfaces. These interfaces help users access resources without requiring the user to have technical or computer expertise. TIE-In utilizes existing, proven technologies such as the Kerberos authentication system, X-Windows, and UNIX sockets. A Front End System (FES) authenticates users and allows them to register for resources and subsequently access them. The FES also stores status and accounting information, and provides an automated method for the resource owners to recover costs from users. The resources available through TIE-In aremore » typically laboratory-developed applications that are used to help design, analyze, and test components in the nation`s nuclear stockpile. Many of these applications can also be used by US companies for non-weapons-related work. TIE-In allows these industry partners to obtain laboratory-developed technical solutions without requiring them to duplicate the technical resources (people, hardware, and software) at Sandia.« less

77 FR 10482 - Trademark Petitions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... through the Trademark Electronic Application System (TEAS). The USPTO has developed a TEAS Global Form format that permits the agency to collect information electronically for which a TEAS form with dedicated data fields is not yet available. With the introduction of the TEAS Global Forms, the information in...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

Recovery of Multilayer-Coated Zerodur and ULE Optics for Extreme-Ultraviolet Lithography by Recoating, Reactive-Ion Etching, and Wet-Chemical Processes.

PubMed

Mirkarimi, P B; Baker, S L; Montcalm, C; Folta, J A

2001-01-01

Extreme-ultraviolet lithography requires expensive multilayer-coated Zerodur or ULE optics with extremely tight figure and finish specifications. Therefore it is desirable to develop methods to recover these optics if they are coated with a nonoptimum multilayer films or in the event that the coating deteriorates over time owing to long-term exposure to radiation, corrosion, or surface contamination. We evaluate recoating, reactive-ion etching, and wet-chemical techniques for the recovery of Mo/Si and Mo/Be multilayer films upon Zerodur and ULE test optics. The recoating technique was successfully employed in the recovery of Mo/Si-coated optics but has the drawback of limited applicability. A chlorine-based reactive-ion etch process was successfully used to recover Mo/Si-coated optics, and a particularly large process window was observed when ULE optics were employed; this is an advantageous for large, curved optics. Dilute HCl wet-chemical techniques were developed and successfully demonstrated for the recovery of Mo/Be-coated optics as well as for Mo/Si-coated optics when Mo/Be release layers were employed; however, there are questions about the extendability of the HCl process to large optics and multiple coat and strip cycles. The technique of using carbon barrier layers to protect the optic during removal of Mo/Si in HF:HNO(3) also showed promise.

Validation of High Displacement Piezoelectric Actuator Finite Element Models

NASA Technical Reports Server (NTRS)

Taleghani, B. K.

2000-01-01

The paper presents the results obtained by using NASTRAN(Registered Trademark) and ANSYS(Regitered Trademark) finite element codes to predict doming of the THUNDER piezoelectric actuators during the manufacturing process and subsequent straining due to an applied input voltage. To effectively use such devices in engineering applications, modeling and characterization are essential. Length, width, dome height, and thickness are important parameters for users of such devices. Therefore, finite element models were used to assess the effects of these parameters. NASTRAN(Registered Trademark) and ANSYS(Registered Trademark) used different methods for modeling piezoelectric effects. In NASTRAN(Registered Trademark), a thermal analogy was used to represent voltage at nodes as equivalent temperatures, while ANSYS(Registered Trademark) processed the voltage directly using piezoelectric finite elements. The results of finite element models were validated by using the experimental results.

Radiant{trademark} Liquid Radioisotope Intravascular Radiation Therapy System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eigler, N.; Whiting, J.; Chernomorsky, A.

1998-01-16

RADIANT{trademark} is manufactured by United States Surgical Corporation, Vascular Therapies Division, (formerly Progressive Angioplasty Systems). The system comprises a liquid {beta}-radiation source, a shielded isolation/transfer device (ISAT), modified over-the-wire or rapid exchange delivery balloons, and accessory kits. The liquid {beta}-source is Rhenium-188 in the form of sodium perrhenate (NaReO{sub 4}), Rhenium-188 is primarily a {beta}-emitter with a physical half-life of 17.0 hours. The maximum energy of the {beta}-particles is 2.1 MeV. The source is produced daily in the nuclear pharmacy hot lab by eluting a Tungsten-188/Rhenium-188 generator manufactured by Oak Ridge National Laboratory (ORNL). Using anion exchange columns and Milliporemore » filters the effluent is concentrated to approximately 100 mCi/ml, calibrated, and loaded into the (ISAT) which is subsequently transported to the cardiac catheterization laboratory. The delivery catheters are modified Champion{trademark} over-the-wire, and TNT{trademark} rapid exchange stent delivery balloons. These balloons have thickened polyethylene walls to augment puncture resistance; dual radio-opaque markers and specially configured connectors.« less

System 80+{trademark} standard design incorporates radiation protection lessons learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crom, T.D.; Naugle, C.L.; Turk, R.S.

1995-03-01

Many lessons have been learned from the current generation of nuclear plants in the area of radiation protection. The following paper will outline how the lessons learned have been incorporated into the design and operational philosophy of the System 80+{trademark} Standard Design currently under development by ABB Combustion Engineering (ABB-CE) with support from Duke Engineering and Services, Inc. and Stone and Webster Engineering Corporation in the Balance-of-Plant design. The System 80+{trademark} Standard Design is a complete nuclear power plant for national and international markets, designed in direct response to utility needs for the 1990`s, and scheduled for Nuclear Regulatory Commissionmore » (NRC) Design Certification under the new standardization rule (10 CFR Part 52). System 80+{trademark} is a natural extension of System 80{sup R} technology, an evolutionary change based on proven Nuclear Steam Supply System (NSSS) in operation at Palo Verde in Arizona and under construction at Yonggwang in the Republic of Korea. The System 80+{trademark} Containment and much of the Balance of Plant design is based upon Duke Power Company`s Cherokee Plant, which was partially constructed in the late 1970`s, but, was later canceled (due to rapid declined in electrical load growth). The System 80+{trademark} Standard Design meets the requirements given in the Electric Power Research Institute (EPRI) Advanced Light Water Reactor (ALWR) Requirements Document. One of these requirements is to limit the occupational exposure to 100 person-rem/yr. This paper illustrates how this goal can be achieved through the incorporation of lessons learned, innovative design, and the implementation of a common sense approach to operation and maintenances practices.« less

19 CFR 133.3 - Documents and fee to accompany application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... trademark to be recorded. However, if the trademark is registered for more than one class of goods (based on..., to secure recordation of a trademark registered for three classes of goods, a fee of $570 is payable...; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.3...

37 CFR 11.14 - Individuals who may practice before the Office in trademark and other non-patent matters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... before the Office in trademark and other non-patent matters. 11.14 Section 11.14 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE Recognition To Practice Before the USPTO Patents...

37 CFR 11.14 - Individuals who may practice before the Office in trademark and other non-patent matters.

Code of Federal Regulations, 2014 CFR

2014-07-01

... before the Office in trademark and other non-patent matters. 11.14 Section 11.14 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE Recognition To Practice Before the USPTO Patents...

37 CFR 11.14 - Individuals who may practice before the Office in trademark and other non-patent matters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... before the Office in trademark and other non-patent matters. 11.14 Section 11.14 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE Recognition To Practice Before the USPTO Patents...

37 CFR 11.14 - Individuals who may practice before the Office in trademark and other non-patent matters.

Code of Federal Regulations, 2011 CFR

2011-07-01

... before the Office in trademark and other non-patent matters. 11.14 Section 11.14 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE Recognition To Practice Before the USPTO Patents...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2014 CFR

2014-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2013 CFR

2013-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2011 CFR

2011-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2012 CFR

2012-07-01

... recordation; requests for copies of trademark documents; and certain documents filed under the Madrid Protocol... to review an action of the Office's Madrid Processing Unit, when filed by mail, must be mailed to: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 2.190 - Addresses for trademark correspondence with the United States Patent and Trademark Office.

Code of Federal Regulations, 2010 CFR

2010-07-01

... filed through the Office's web site, at http://www.uspto.gov. Paper documents and cover sheets to be... trademark documents can be ordered through the Office's web site at www.uspto.gov. Paper requests for...: Madrid Processing Unit, 600 Dulany Street, MDE-7B87, Alexandria, VA 22314-5793. [68 FR 48289, Aug. 13...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false The United States Patent and Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES International Processing...

37 CFR 11.14 - Individuals who may practice before the Office in trademark and other non-patent matters.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Individuals who may practice before the Office in trademark and other non-patent matters. 11.14 Section 11.14 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND...

31 CFR 545.515 - Certain transactions related to patents, trademarks, and copyrights authorized.

Code of Federal Regulations, 2010 CFR

2010-07-01

... any application to obtain a patent, trademark, copyright or other form of intellectual property... territory of Afghanistan controlled by the Taliban connected to such intellectual property protection; (2) The receipt of patent, trademark, copyright, or other form of intellectual property protection; (3...

Atomic force microscopy characterization of Zerodur mirror substrates for the extreme ultraviolet telescopes aboard NASA's Solar Dynamics Observatory.

PubMed

Soufli, Regina; Baker, Sherry L; Windt, David L; Gullikson, Eric M; Robinson, Jeff C; Podgorski, William A; Golub, Leon

2007-06-01

The high-spatial frequency roughness of a mirror operating at extreme ultraviolet (EUV) wavelengths is crucial for the reflective performance and is subject to very stringent specifications. To understand and predict mirror performance, precision metrology is required for measuring the surface roughness. Zerodur mirror substrates made by two different polishing vendors for a suite of EUV telescopes for solar physics were characterized by atomic force microscopy (AFM). The AFM measurements revealed features in the topography of each substrate that are associated with specific polishing techniques. Theoretical predictions of the mirror performance based on the AFM-measured high-spatial-frequency roughness are in good agreement with EUV reflectance measurements of the mirrors after multilayer coating.

Atomic force microscopy characterization of Zerodur mirror substrates for the extreme ultraviolet telescopes aboard NASA's Solar Dynamics Observatory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soufli, Regina; Baker, Sherry L.; Windt, David L.

2007-06-01

The high-spatial frequency roughness of a mirror operating at extreme ultraviolet (EUV)wavelengths is crucial for the reflective performance and is subject to very stringent specifications. To understand and predict mirror performance, precision metrology is required for measuring the surface roughness. Zerodur mirror substrates made by two different polishing vendors for a suite of EUV telescopes for solar physics were characterized by atomic force microscopy (AFM). The AFM measurements revealed features in the topography of each substrate that are associated with specific polishing techniques. Theoretical predictions of the mirror performance based on the AFM-measured high-spatial-frequency roughness are in good agreement withmore » EUV reflectance measurements of the mirrors after multilayer coating.« less

76 FR 72000 - Patent, Trademark & Copyright Acts

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-21

... DEPARTMENT OF THE INTERIOR Geological Survey Patent, Trademark & Copyright Acts AGENCY: U.S. Geological Survey, Interior. ACTION: Notice of Prospective Intent to Award Exclusive License. SUMMARY: The United States Geological Survey (USGS) is contemplating awarding an exclusive license to: Geosyntec...

Effect of Oxygen Concentration on Autogenous Ignition Temperature and Pneumatic Impact Ignitability of Nonmetallic Materials

NASA Technical Reports Server (NTRS)

Smith, Sarah

2009-01-01

Extensive test data exist on the ignitability of nonmetallic materials in pure oxygen, but these characteristics are not as well understood for lesser oxygen concentrations. In this study, autogenous ignition temperature testing and pneumatic impact testing were used to better understand the effects of oxygen concentration on ignition of nonmetallic materials. Tests were performed using oxygen concentrations of 21, 34, 45, and 100 %. The following materials were tested: PTFE Teflon(Registered Trademark), Buna-N, Silicone, Zytel(Registered Trademark) 42, Viton(registered Trademark) A, and Vespel(Registered Trademark) SP-21.

Competition in prescription drug markets: the roles of trademarks, advertising, and generic names.

PubMed

Feldman, Roger; Lobo, Félix

2013-08-01

We take on two subjects of controversy among economists-advertising and trademarks-in the context of the market for generic drugs. We outline a model in which trademarks for drug names reduce search costs but increase product differentiation. In this particular framework, trademarks may not benefit consumers. In contrast, the generic names of drugs or "International Nonproprietary Names" (INN) have unquestionable benefits in both economic theory and empirical studies. We offer a second model where advertising of a brand-name drug creates recognition for the generic name. The monopoly patent-holder advertises less than in the absence of a competitive spillover.

15 CFR 280.313 - Recordal of additional insignia.

Code of Federal Regulations, 2010 CFR

2010-01-01

... for recordal of its trademark for fasteners if the trademark is the subject of a duly filed application or is registered in the United States Patent and Trademark Office on the Principal Register. Upon recordal, either the alphanumeric designation or the trademark, or both, may be used as recorded insignias...

31 CFR 586.512 - Certain transactions related to patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., copyright or other intellectual property protection in the United States or the FRY (S&M) are authorized: (1... of intellectual property protection; (2) The receipt of a patent, trademark, copyright or other form of intellectual property protection; (3) The renewal or maintenance of a patent, trademark, copyright...

16 CFR 303.41 - Use of fiber trademarks and generic names in advertising.

Code of Federal Regulations, 2010 CFR

2010-01-01

... use of a fiber trademark shall require a full disclosure of the fiber content information required by... or generic name is used in non-required information in advertising, such fiber trademark or generic... advertising. 303.41 Section 303.41 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC...

Comparison of Cognitive Performance Tests for Promethazine Pharmacodynamics in Human Subjects

NASA Technical Reports Server (NTRS)

Vaksman, Z.; Boyd, J. L.; Wang, Z.; Putcha, L.

2005-01-01

The objective of this study is to compare cognitive function tests, Automated Neurological Assessment Metrics (ANAM) based Readiness Evaluation System (ARES(Registered TradeMark)) on a Palm Pilot and Windows based Spaceflight Cognitive Assessment Tool (WinSCAT(Registered TradeMark)) on a personal computer (PC) to assess performance effects of promethazine (PMZ) after administration to human subjects. In a randomized placebo-controlled cross-over design, subjects received 12.5, 25, and 50 mg intramuscular (IM) PMZ or a placebo and completed 14 sessions with WinSCAT(Registered TradeMark) (v. 1.26) and ARES(Registered TradeMark) (v. 1.27) consecutively for 72 h post dose. Maximum plasma concentrations (4.25, 6.25 and 13.33 ng/ml) were linear with dose and were achieved by 0.75, 8, and 24 h after dosing for the three doses, respectively. No significant differences in cognitive function after PMZ dosing were detected using WinSCAT(Registered TradeMark), however, tests from ARES(Registered TradeMark) demonstrated concentration dependent decrements in reaction time associated with PMZ dose.

26 CFR 1.177-1 - Election to amortize trademark and trade name expenditures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (3) of this paragraph. See also paragraph (c) of this section for time and manner of making election... chargeable to capital account; and (iii) Is not part of the consideration or purchase price paid for a... expand a previously owned trademark or trade name through purchase of a competitive trademark. Similarly...

16 CFR 303.17 - Use of fiber trademarks and generic names on labels.

Code of Federal Regulations, 2010 CFR

2010-01-01

... label in conjunction with the generic name of the fiber to which it relates. Where such a trademark is placed on a label in conjunction with the required information, the generic name of the fiber must appear in immediate conjunction therewith, and such trademark and generic name must appear in type or...

76 FR 35411 - Applications for Trademark Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

... electronically through the Trademark Electronic Application System (TEAS) using a regular TEAS application form or a TEAS Plus application form. Applicants that file their applications using the TEAS Plus form pay... regarding the application through TEAS, and agree to receive communications concerning the application by e...

An Evaluation of the NIDS (registered trademark) ACE (trademark) Test

DTIC Science & Technology

2014-06-30

included chemicals commonly used for drinking water disinfection (chlorine and chloramine), byproducts of cyanobacteria blooms (geosmin and 2...duration field toxicity test for Army drinking water . One component of the ESB the ACE Test) is an enzymatic assay designed to detect neurotoxicants...adverse health effects is the presence of toxic industrial chemicals (TICs) in drinking water . The current field water test kit – the water quality

77 FR 3745 - Establishment of a One-Year Retention Period for Trademark-Related Papers That Have Been Scanned...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... to the USPTO's past practice of indefinitely retaining papers that have been scanned into TICRS stems... One-Year Retention Period for Trademark- Related Papers That Have Been Scanned Into the Trademark... retention period that began on September 26, 2011, for papers scanned into the Trademark Initial Capture...

SPEEDUP{trademark} ion exchange column model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hang, T.

2000-03-06

A transient model to describe the process of loading a solute onto the granular fixed bed in an ion exchange (IX) column has been developed using the SpeedUp{trademark} software package. SpeedUp offers the advantage of smooth integration into other existing SpeedUp flowsheet models. The mathematical algorithm of a porous particle diffusion model was adopted to account for convection, axial dispersion, film mass transfer, and pore diffusion. The method of orthogonal collocation on finite elements was employed to solve the governing transport equations. The model allows the use of a non-linear Langmuir isotherm based on an effective binary ionic exchange process.more » The SpeedUp column model was tested by comparing to the analytical solutions of three transport problems from the ion exchange literature. In addition, a sample calculation of a train of three crystalline silicotitanate (CST) IX columns in series was made using both the SpeedUp model and Purdue University's VERSE-LC code. All test cases showed excellent agreement between the SpeedUp model results and the test data. The model can be readily used for SuperLig{trademark} ion exchange resins, once the experimental data are complete.« less

Fuel and power coproduction: The Liquid Phase Methanol (LPMEOH{trademark}) process demonstration at Kingsport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drown, D.P.; Brown, W.R.; Heydorn, E.C.

1997-12-31

The Liquid Phase Methanol (LPMEOH{trademark}) process uses a slurry bubble column reactor to convert syngas (primarily a mixture of carbon monoxide and hydrogen) to methanol. Because of its superior heat management, the process is able to be designed to directly handle the carbon monoxide (CO)-rich syngas characteristic of the gasification of coal, petroleum coke, residual oil, wastes, or of other hydrocarbon feedstocks. When added to an integrated gasification combined cycle (IGCC) power plant, the LPMEOH{trademark} process converts a portion of the CO-rich syngas produced by the gasifier to methanol, and the remainder of the unconverted gas is used to fuelmore » the gas turbine combined-cycle power plant. The LPMEOH{trademark} process has the flexibility to operate in a daily electricity demand load-following manner. Coproduction of power and methanol via IGCC and the LPMEOH{trademark} process provides opportunities for energy storage for electrical demand peak shaving, clean fuel for export, and/or chemical methanol sales.« less

25 CFR 308.2 - Certificates of genuineness to be attached to trade-marks.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false Certificates of genuineness to be attached to trade-marks. 308.2 Section 308.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR REGULATIONS FOR USE OF CERTIFICATES OF THE INDIAN ARTS AND CRAFTS BOARD TO BE ATTACHED TO THEIR TRADE-MARKS BY INDIAN ENTERPRISES CONCERNED WITH THE PRODUCTION AN...

25 CFR 308.2 - Certificates of genuineness to be attached to trade-marks.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false Certificates of genuineness to be attached to trade-marks. 308.2 Section 308.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR REGULATIONS FOR USE OF CERTIFICATES OF THE INDIAN ARTS AND CRAFTS BOARD TO BE ATTACHED TO THEIR TRADE-MARKS BY INDIAN ENTERPRISES CONCERNED WITH THE PRODUCTION AN...

25 CFR 308.2 - Certificates of genuineness to be attached to trade-marks.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Certificates of genuineness to be attached to trade-marks. 308.2 Section 308.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR REGULATIONS FOR USE OF CERTIFICATES OF THE INDIAN ARTS AND CRAFTS BOARD TO BE ATTACHED TO THEIR TRADE-MARKS BY INDIAN ENTERPRISES CONCERNED WITH THE PRODUCTION AN...

Potential organic herbicides for squash production: Pelargonic acid herbicides AXXE (registered trademark) and Scythe (registered trademark)

USDA-ARS?s Scientific Manuscript database

Organic squash (Cucurbita pepo L.) producers need appropriate herbicides that can effectively provide season- long weed control. Research was conducted in southeast Oklahoma (Atoka County, Lane, OK) to determine the impact of potential organic herbicides on weed control efficacy, crop injury, and y...

Advanced Metallic Seal for High Temperature Applications

NASA Technical Reports Server (NTRS)

Nolan, Terence; Swensen, Jeff; Layer, Jeff

2006-01-01

The U-Plex(Registered TradeMark) was designed to allow greater elastic deflection capability in a given gland volume than the now conventional E-seal(Regitered TradeMark). Greater deflection capability with the associated lower bending stresses provides several benefits. For pneumatic duct joints, the axial free height is increased to allow sealing of flanges with weld distortions significantly in excess of what could be tolerated with E-seals(Registered TradeMark), This performance is achieved while maintaining the reusability and ease of assembly typical of E-seal(Registered TradeMark) rigid duct joints.

76 FR 69132 - Trademark Technical and Conforming Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... Madrid Agreement Concerning the International Registration of Marks (``Madrid Rules'') to implement the... Cases and the Madrid Rules to implement the Trademark Technical and Conforming Amendment Act of 2010... Madrid Protocol (``Madrid Protocol registrants'') to file Affidavits or Declarations of Use or Excusable...

37 CFR 2.153 - Publication requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 37 Patents, Trademarks, and Copyrights 1 2014-07-01 2014-07-01 false Publication requirements. 2..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.153 Publication requirements. The owner of a mark registered under the provisions of the Trademark...

37 CFR 2.153 - Publication requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Publication requirements. 2..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.153 Publication requirements. The owner of a mark registered under the provisions of the Trademark...

37 CFR 2.153 - Publication requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Publication requirements. 2..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.153 Publication requirements. The owner of a mark registered under the provisions of the Trademark...

37 CFR 2.153 - Publication requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Publication requirements. 2..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.153 Publication requirements. The owner of a mark registered under the provisions of the Trademark...

Detecting Key Inter-Joint Distances and Anthropometry Effects for Static Gesture Development using Microsoft Kinect

DTIC Science & Technology

2013-09-01

DATES COVERED (From - To) 1 Sep 2013–30 Sep 2013 4 . TITLE AND SUBTITLE Detecting Key Inter-Joint Distances and Anthropometry Effects for Static Gesture...13. SUPPLEMENTARY NOTES “Nintendo Wii” is a registered trademark of Nintendo Company, Ltd. “ PlayStation ” is a registered trademark of Sony...Computer Entertainment; PlayStation “Move” ® (Sony Computer Entertainment). “Kinect” is a registered trademark of Microsoft Corporation. Merriam-Webster

Degradation of Teflon(trademark) FEP Following Charged Particle Radiation and Rapid Thermal Cycling

NASA Technical Reports Server (NTRS)

Townsend, Jacqueline; Powers, Charles; Viens, Michael; Ayres-Treusdell, Mary; Munoz, Bruno

1999-01-01

During the Second Servicing Mission (SM2) of the Hubble Space Telescope (HST) severe degradation was observed on the outer layer of the thermal control blankets. Astronaut observations and photographs revealed large cracks in the metallized Teflon(trademark) FEP (fluorinated ethylene propylene), the outer layer of the multi-layer insulation (MLI), in many locations around the telescope. In an effort to understand what elements of the space environment might cause such damage, pristine Teflon(trademark) FEP was tested for durability to radiation and thermal cycling. Specimens were subjected to electron and proton fluences comparable to those experienced by HST and were subsequently thermal cycled in a custom-built rapid thermal cycle chamber. Tensile tests of the specimens showed that radiation followed by thermal cycling significantly reduced the ultimate strength and elongation of Teflon(trademark) FEP.

From the Stadium Parking Lot to the Information Superhighway: How To Protect Your Trademarks from Infringement.

ERIC Educational Resources Information Center

Bearby, Scott; Siegal, Bruce

2002-01-01

Provides an overview of collegiate trademark cases; discusses several forms of infringement, including traditional infringement on commercial products, ambush marketing, and Internet infringement; addresses available remedies; and offers practical tips for dealing effectively with trademark protection. (EV)

The AMTEX Partnership{trademark}. Fourth quarter FY95 report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

The AMTEX Partnership{trademark} is a collaborative research and development program among the US Integrated Textile Industry, the Department of Energy (DOE), the national laboratories, other federal agencies and laboratories, and universities. The goal of AMTEX is to strengthen the competitiveness of this vital industry, thereby preserving and creating US jobs. The operations and program management of the AMTEX Partnership{trademark} is provided by the Program Office. This report is produced by the Program Office on a quarterly basis and provides information on the progress, operations, and project management of the partnership. Progress is reported on the following projects: computer-aided fabric evaluation;more » cotton biotechnology; demand activated manufacturing architecture; electronic embedded fingerprints; on-line process control for flexible fiber manufacturing; rapid cutting; sensors for agile manufacturing; and textile resource conservation.« less

15 CFR 280.326 - Records and files of the United States Patent and Trademark Office.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Records and files of the United States Patent and Trademark Office. 280.326 Section 280.326 Commerce and Foreign Trade Regulations Relating to... Records and files of the United States Patent and Trademark Office. The records relating to fastener...

15 CFR 280.326 - Records and files of the United States Patent and Trademark Office.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Records and files of the United States Patent and Trademark Office. 280.326 Section 280.326 Commerce and Foreign Trade Regulations Relating to... Records and files of the United States Patent and Trademark Office. The records relating to fastener...

15 CFR 280.326 - Records and files of the United States Patent and Trademark Office.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Records and files of the United States Patent and Trademark Office. 280.326 Section 280.326 Commerce and Foreign Trade Regulations Relating to... Records and files of the United States Patent and Trademark Office. The records relating to fastener...

15 CFR 280.326 - Records and files of the United States Patent and Trademark Office.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Records and files of the United States Patent and Trademark Office. 280.326 Section 280.326 Commerce and Foreign Trade Regulations Relating to... Records and files of the United States Patent and Trademark Office. The records relating to fastener...

15 CFR 280.326 - Records and files of the United States Patent and Trademark Office.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Records and files of the United States Patent and Trademark Office. 280.326 Section 280.326 Commerce and Foreign Trade Regulations Relating to... Records and files of the United States Patent and Trademark Office. The records relating to fastener...

16 CFR 301.43 - Use of deceptive trade or corporate names, trademarks or graphic representations prohibited.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., trademarks or graphic representations prohibited. 301.43 Section 301.43 Commercial Practices FEDERAL TRADE... Regulations § 301.43 Use of deceptive trade or corporate names, trademarks or graphic representations prohibited. No person shall use in labeling, invoicing or advertising any fur or fur product a trade name...

ZERODUR strength modeling with Weibull statistical distributions

NASA Astrophysics Data System (ADS)

Hartmann, Peter

2016-07-01

The decisive influence on breakage strength of brittle materials such as the low expansion glass ceramic ZERODUR is the surface condition. For polished or etched surfaces it is essential if micro cracks are present and how deep they are. Ground surfaces have many micro cracks caused by the generation process. Here only the depths of the micro cracks are relevant. In any case presence and depths of micro cracks are statistical by nature. The Weibull distribution is the model used traditionally for the representation of such data sets. It is based on the weakest link ansatz. The use of the two or three parameter Weibull distribution for data representation and reliability prediction depends on the underlying crack generation mechanisms. Before choosing the model for a specific evaluation, some checks should be done. Is there only one mechanism present or is it to be expected that an additional mechanism might contribute deviating results? For ground surfaces the main mechanism is the diamond grains' action on the surface. However, grains breaking from their bonding might be moved by the tool across the surface introducing a slightly deeper crack. It is not to be expected that these scratches follow the same statistical distribution as the grinding process. Hence, their description with the same distribution parameters is not adequate. Before including them a dedicated discussion should be performed. If there is additional information available influencing the selection of the model, for example the existence of a maximum crack depth, this should be taken into account also. Micro cracks introduced by small diamond grains on tools working with limited forces cannot be arbitrarily deep. For data obtained with such surfaces the existence of a threshold breakage stress should be part of the hypothesis. This leads to the use of the three parameter Weibull distribution. A differentiation based on the data set alone without preexisting information is possible but requires a

Content-based unconstrained color logo and trademark retrieval with color edge gradient co-occurrence histograms

NASA Astrophysics Data System (ADS)

Phan, Raymond; Androutsos, Dimitrios

2008-01-01

In this paper, we present a logo and trademark retrieval system for unconstrained color image databases that extends the Color Edge Co-occurrence Histogram (CECH) object detection scheme. We introduce more accurate information to the CECH, by virtue of incorporating color edge detection using vector order statistics. This produces a more accurate representation of edges in color images, in comparison to the simple color pixel difference classification of edges as seen in the CECH. Our proposed method is thus reliant on edge gradient information, and as such, we call this the Color Edge Gradient Co-occurrence Histogram (CEGCH). We use this as the main mechanism for our unconstrained color logo and trademark retrieval scheme. Results illustrate that the proposed retrieval system retrieves logos and trademarks with good accuracy, and outperforms the CECH object detection scheme with higher precision and recall.

37 CFR 1.377 - Review of decision refusing to accept and record payment of a maintenance fee filed prior to...

Code of Federal Regulations, 2010 CFR

2010-07-01

... agent registered to practice before the Patent and Trademark Office, or by the patentee, the assignee... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Review of decision refusing... 1.377 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF...

Production of the 4.1-m Zerodur mirror blank for the VISTA Telescope

NASA Astrophysics Data System (ADS)

Doehring, Thorsten; Jedamzik, Ralf; Wittmer, Volker; Thomas, Armin

2004-09-01

VISTA (Visible and Infrared Survey Telescope for Astronomy) is designed to be the world's largest wide field telescope. After finishing of the construction the telescope will be part of ESO and located in Chile close to the VLT observatory at Cerro Paranal. In November 2001 SCHOTT was selected by the VISTA project office at the Royal Observatory of Edinburgh to deliver the 4.1 m diameter primary mirror blank. The manufacturing of the mirror blank made from the zero expansion material Zerodur was challenging especially due to the f/1 design. Several tons of the glass ceramic material were removed during the grinding operation. A meniscus blank with a diameter of 4100 mm and a thickness of 171.5 mm was generated, having a large central hole of 1200 mm and an aspherical shape of the concave surface. Also the handling and turning operations needed special effort and were performed by a skilled team. This paper presents details and pictures of the corresponding production and inspection sequence at SCHOTT. The geometrical parameters were measured during manufacturing by help of a laser tracker system and the achieved parameters were compared with the initial technical specification. The final quality inspection verified the excellent quality of the mirror blank. The close co-operation between the astronomers and industry resulted in a project management without problems. In April 2003 the VISTA blank was delivered successfully within a ceremony dedicated to the anniversary of "100 years of astronomical mirror blanks from SCHOTT."

Creep Property Characterization of Potential Brayton Cycle Impeller and Duct Materials

NASA Technical Reports Server (NTRS)

Gabb, Timothy P.; Gayda, john; Garg, Anita

2007-01-01

Cast superalloys have potential applications in space as impellers within closed-loop Brayton cycle nuclear power generation systems. Likewise wrought superalloys are good candidates for ducts and heat exchangers transporting the inert working gas in a Brayton-based power plant. Two cast superalloys, Mar-M247LC and IN792, and a NASA GRC powder metallurgy superalloy, LSHR, have been screened to compare their respective capabilities for impeller applications. Mar-M247LC has been selected for additional long term evaluations. Initial tests in helium indicate this inert environment may debit long term creep resistance of this alloy. Several wrought superalloys including Hastelloy(Registered TradeMark) X, Inconel(Registered TradeMark) 617, Inconel(Registered TradeMark) 740, Nimonic(Registered TradeMark) 263, Incoloy(Registered TradeMark) MA956, and Haynes 230 are also being screened to compare their capabilities for duct applications. Haynes 230 has been selected for additional long term evaluations. Initial tests in helium are just underway for this alloy. These proposed applications would require sufficient strength and creep resistance for long term service at temperatures up to 1200 K, with service times to 100,000 h or more. Therefore, long term microstructural stability is also being screened.

37 CFR 2.83 - Conflicting marks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Trademarks until the published or issued application is registered or abandoned. [37 FR 2880, Feb. 9, 1972... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Conflicting marks. 2.83 Section 2.83 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF...

Trademark Status & Document Retrieval

Science.gov Websites

Policy & Law Reports TSDR now includes a Post Registration Maintenance Tab. When viewing a Registered mark, users will now find a new 3rd tab providing Post Registration information next to the " mark is not registered. TSDR now includes a Post Registration Maintenance Tab. When viewing a

37 CFR 2.155 - Notice of publication.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Notice of publication. 2.155 Section 2.155 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.155 Notice...

37 CFR 11.5 - Register of attorneys and agents in patent matters; practice before the Office.

Code of Federal Regulations, 2013 CFR

2013-07-01

... agents in patent matters; practice before the Office. 11.5 Section 11.5 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE Recognition To Practice Before the USPTO Patents...

37 CFR 11.5 - Register of attorneys and agents in patent matters; practice before the Office.

Code of Federal Regulations, 2012 CFR

2012-07-01

... agents in patent matters; practice before the Office. 11.5 Section 11.5 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE Recognition To Practice Before the USPTO Patents...

37 CFR 11.5 - Register of attorneys and agents in patent matters; practice before the Office.

Code of Federal Regulations, 2014 CFR

2014-07-01

... agents in patent matters; practice before the Office. 11.5 Section 11.5 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE Recognition To Practice Before the USPTO Patents...

Xyce Parallel Electronic Simulator Reference Guide Version 6.7.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Aadithya, Karthik Venkatraman; Mei, Ting

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide [1] . The information herein is subject to change without notice. Copyright c 2002-2017 Sandia Corporation. All rights reserved. Trademarks Xyce TM Electronic Simulator and Xyce TMmore » are trademarks of Sandia Corporation. Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks of Amtec Engineering, Inc. All other trademarks are property of their respective owners. Contacts World Wide Web http://xyce.sandia.gov https://info.sandia.gov/xyce (Sandia only) Email xyce@sandia.gov (outside Sandia) xyce-sandia@sandia.gov (Sandia only) Bug Reports (Sandia only) http://joseki-vm.sandia.gov/bugzilla http://morannon.sandia.gov/bugzilla« less

16 CFR 303.19 - Name or other identification required to appear on labels.

Code of Federal Regulations, 2010 CFR

2010-01-01

... trademark, used as a house mark, registered in the United States Patent Office, such word trademark may be used on labels in lieu of the name otherwise required: Provided, The owner of such word trademark furnishes the Commission a copy of the registration prior to its use. No trademark, trade names, or other...

75 FR 13187 - Self-Regulatory Organizations; NASDAQ OMX PHLX, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

...), NASDAQ-100(R) and NASDAQ-100 Index(R) are registered trademarks of The NASDAQ OMX Group, Inc. (which with... proposes to: (i) Increase the options transaction charge for Registered Options Traders (``ROTs'') and... 2000[supreg] is a trademark and service mark of the Frank Russell Company, used under license. Neither...

CERT (registered trademark) Resilience Management Model (CERT (registered trademark)-RMM) V1.1: NIST Special Publication Crosswalk Version 2

DTIC Science & Technology

2014-06-01

27000 series, COBIT, the British Standards Institution’s BS 25999, and ISO 24762  includes quantitative process measurements that can be used to...the NIST special publications 800 series, the International Organization for Standards ( ISO ) and International Electrotechnical Commission (IEC

More than a Network: Building Professional Communities for Educational Improvement

ERIC Educational Resources Information Center

Dolle, Jonathan R.; Gomez, Louis M.; Russell, Jennifer Lin; Bryk, Anthony S.

2013-01-01

This chapter is a case study of the Carnegie Foundation for the Advancement of Teaching's Pathways [TM] program. The goal of the Statway [Registered Trademark] and Quantway [Registered Trademark] pathways is to improve the success rate of community college students who place into developmental mathematics. What makes these programs unique is…

19 CFR 133.23 - Restrictions on importation of gray market articles.

Code of Federal Regulations, 2010 CFR

2010-04-01

... SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Importations Bearing Registered and/or Recorded Trademarks or Recorded Trade Names § 133.23 Restrictions on importation of gray... foreign-made articles bearing a genuine trademark or trade name identical with or substantially...

Tribological Properties of a Pennzane(Registered Trademark)-Based Liquid Lubricant (Disubstituted Alkylated Cyclopentane) for Low Temperature Space Applications

NASA Technical Reports Server (NTRS)

Venier, Clifford; Casserly, Edward W.; Jones, William R., Jr.; Marchetti, Mario; Jansen, Mark J.; Predmore, Roamer E.

2002-01-01

The tribological properties of a disubstituted alkylated cyclopentane, Pennzane (registered) Synthesized Hydrocarbon Fluid X-1000, are presented. This compound is a lower molecular weight version of the commonly used multiply alkylated cyclopentane, Pennzane X-2000, currently used in many space mechanisms. New, lower temperature applications will require liquid lubricants with lower viscosities and pour points and acceptable vapor pressures. Properties reported include: friction and wear studies and lubricated lifetime in vacuum; additionally, typical physical properties (i.e., viscosity-temperature, pour point, flash and fire point, specific gravity, refractive index, thermal properties, volatility and vapor pressure) are reported.

19 CFR 133.27 - Civil fines for those involved in the importation of merchandise bearing a counterfeit mark.

Code of Federal Regulations, 2010 CFR

2010-04-01

... BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Importations Bearing Registered and/or Recorded Trademarks or Recorded Trade Names...

The Classification and Evaluation of Computer-Aided Software Engineering Tools

DTIC Science & Technology

1990-09-01

International Business Machines Corporation Customizer is a Registered Trademark of Index Technology Corporation Data Analyst is a Registered Trademark of...years, a rapid series of new approaches have been adopted including: information engineering, entity- relationship modeling, automatic code generation...support true information sharing among tools and automated consistency checking. Moreover, the repository must record and manage the relationships and

Characterization of BN rich layer on ammonia treated Nextel{trademark}312 fibers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khasgiwale, N.R.; Butler, E.P.; Tsakalakos, L.

A BN rich layer grown on Nextel{trademark}312 fibers by appropriate ammonia treatments was evaluated using various complimentary techniques including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM)/Parallel Electron Energy Loss Spectroscopy (PEELS in TEM). Three different ammonia treatments were studied. Ammonia treatment resulted in crystallization of the Nextel{trademark}312 fiber. The BN rich surface layer formed due to ammonia treatment was clearly detected in XPS and PEELS both before and after oxidation. The layer thickness was estimated to be between 5--10 nm. The layer was stable after oxidation treatment at 600 C formore » 100 hours. High resolution TEM observations of the fiber surface revealed a variable BN rich layer thickness. Patches of turbostratic BN were observed under certain conditions, however mostly the layer appeared to be amorphous.« less

37 CFR 41.5 - Counsel.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Counsel. 41.5 Section 41.5 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE... registered practitioner to appear as counsel in a specific proceeding. (b) Disqualification. (1) The Board...

19 CFR 133.24 - Restrictions on articles accompanying importer and mail importations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Importations Bearing Registered and/or Recorded Trademarks or Recorded Trade Names § 133.24 Restrictions on articles... the 30-day period of detention if any of the circumstances allowing exemption from trademark or trade...

78 FR 16839 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... been, registered or recognized to practice before the United States Patent and Trademark Office (USPTO... DEPARTMENT OF COMMERCE Patent and Trademark Office Privacy Act of 1974; System of Records AGENCY: United States Patent and Trademark Office, Commerce. ACTION: Notice of amendment of Privacy Act system of...

37 CFR 11.6 - Registration of attorneys and agents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... agents. 11.6 Section 11.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE... the requirements of this part may be registered as a patent attorney to practice before the Office...

37 CFR 11.6 - Registration of attorneys and agents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... agents. 11.6 Section 11.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE... the requirements of this part may be registered as a patent attorney to practice before the Office...

37 CFR 11.6 - Registration of attorneys and agents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... agents. 11.6 Section 11.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE... the requirements of this part may be registered as a patent attorney to practice before the Office...

37 CFR 11.6 - Registration of attorneys and agents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... agents. 11.6 Section 11.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE... the requirements of this part may be registered as a patent attorney to practice before the Office...

Thermoplastic polyimide NEW-TPI (trademark)

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung; Reddy, Rakasi M.

1990-01-01

Thermal and rheological properties of a commercial thermoplastic polyimide, NEW-TPI (trademark), were characterized. The as-received material possesses initially a transient crystallite form with a bimodal distribution in peak melting temperatures. After the melting of the initial crystallite structure, the sample can be recrystallized by various thermal treatments. A bimodal or single modal melting peak distribution is formed for annealing temperatures below or above 360 C, respectively. The recrystallized crystallinities are all transient in nature. The polymers are unable to be recrystallized after being subjected to elevated temperature annealing above 450 C. The recrystallization mechanism was postulated, and a simple kinetics model was found to describe the behavior rather satisfactory under the conditions of prolonged thermal annealing. Rheological measurements made in the linear viscoelastic range support the evidence observed in the thermal analysis. Furthermore, the measurements sustain the manufacturer's recommended processing window of 400 to 420 C for this material.

37 CFR 4.6 - Attorneys and Agents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Attorneys and Agents. 4.6 Section 4.6 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF... registered patent attorneys and agents will not be treated under this section, unless a complaint fairly...

19 CFR 133.25 - Procedure on detention of articles subject to restriction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Importations Bearing Registered and/or Recorded Trademarks or Recorded Trade Names § 133.25 Procedure on detention of articles... disclose to the owner of the trademark or trade name any of the following information in order to obtain...

37 CFR 1.378 - Acceptance of delayed payment of maintenance fee in expired patent to reinstate patent.

Code of Federal Regulations, 2010 CFR

2010-07-01

... attorney or agent registered to practice before the Patent and Trademark Office, or by the patentee, the... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Acceptance of delayed payment of maintenance fee in expired patent to reinstate patent. 1.378 Section 1.378 Patents, Trademarks...

19 CFR 133.26 - Demand for redelivery of released merchandise.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Importations Bearing Registered and/or Recorded Trademarks or Recorded Trade Names § 133.26 Demand for redelivery of released merchandise. If it...

A Brief Study on Toxic Combustion Products of the Polymers Used in High-Pressure Oxygen Systems

NASA Technical Reports Server (NTRS)

Hshieh, Fu-Yu; Beeson, Harold D.

2005-01-01

One likely cause of polymer ignition in a high-pressure oxygen system is the adiabatic-compression heating of polymers caused by pneumatic impact. Oxidative pyrolysis or combustion of polymers in a high-pressure oxygen system could generate toxic gases. This paper investigates the feasibility of using the NASA pneumatic-impact system to conduct adiabatic-compression combustion tests and determines the toxic combustion products produced from the burning of five selected polymers. Five polymers commonly used in high-pressure oxygen systems, Zytel(Registered TradeMark) 42 (Nylon 6/6), Buna N (nitrile rubber), Witon(Registered TradeMark) A (copolymer of vinylidene fluoride and hexafluoropropylene), Neoflon(Registered TradeMark) (polychlorotrifluoroethylene), and Teflon(Registered TradeMark) (polytetrafluoroethylene), were tested in the NASA pneumatic-impact test system at 17.2-MPa oxygen pressure. The polymers were ignited and burned; combustion products were collected in a stainless-steel sample bottle and analyzed using various methods. The results show that the NASA pneumatic-impact system is an appropriate test system to conduct adiabatic-compression combustion tests and to collect combustion products for further chemical analysis. The composition of the combustion product gas generated from burning the five selected polymers are presented and discussed.

77 FR 30197 - Changes in Requirements for Specimens and for Affidavits or Declarations of Continued Use or...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

... services to be deleted from the registration. Therefore, if a trademark owner is not using the mark with... specimens demonstrate a trademark owner's continued use of its mark in commerce for the goods/services in... a use-based trademark application, an allegation of use, or an amendment to a registered mark. These...

Human Factors Feedback: Brain Acoustic Monitor

DTIC Science & Technology

2012-02-01

Microsoft Office Excel .................................................................12  iv 4.  Conclusions 13  5.  References 15  Appendix A...Panasonic Toughbook system. †Toughbook is registered trademark of Panasonic Corporation. ‡Windows is a registered trademark of Microsoft Corporation. 4...was preloaded with Microsoft Windows XP service pack 2 OS. This OS is widely used on IBM-style personal computers, and the BAM system did not

ZERODUR iso-grid design of a 3m class light weighted mirror blank for the E-ELT M5

NASA Astrophysics Data System (ADS)

Jedamzik, Ralf; Leys, Antoine; Seibert, Volker; Westerhoff, Thomas

2014-07-01

The tip and tilt M5 mirror of the European Extremly Large Telescope (E-ELT) requires a demanding approach in light weighting. The approximately 3 m x 2.5 m elliptical plano mirror is specified to a weight of less than 500 kg with high Eigenfrequencies and low deformation under different inclination angles. In 2011 SCHOTT has presented a study to develop a design for the M5 mirror blank of the ESO E-ELT. The design presented was based on a radial square design to achieve the best compromise between performance and manufacturability. With the fabrication of a prototype section SCHOTT demonstrated its capability to manufacture the demanding features including pockets with 350 mm depth, thin walls and sloped pocket bottoms. Now 3 years later SCHOTT presents an iso-grid based design that is in accordance with the manufacturability progress that has been demonstrated in various ELZM (Extremely Lightweighted ZERODUR Mirrors) publications in the last two years. The achievements on the specified mechanical parameters are compared to the first approach from 2011. In this paper the results are presented and the performance parameters are discussed.

Evaluating the Effectiveness of NASA's Destination Tomorrow(Trademark) 2000-2001 Program

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Perry, Jeannine

2002-01-01

NASA's Destination Tomorrow(trademark) series consists of 30-minute educational television programs that focus on NASA research, past, present, and future and are designed for educators, parents, and adult (lifelong) learners. Programs in this award-winning series follow a magazine style format with segments ranging from 3-5 minutes to 6-8 minutes. An associated web site provides summaries of stories and links to related program material. The development of the programs is based on educational theory, principles, and research as they pertain to how adults learn and apply knowledge. The five programs in the 2000-2001 season were produced in English and dubbed in Spanish. Telephone interviews with managers of cable access television stations were conducted in January 2002. NASA's Destination Tomorrow(trademark) interviewees reported that (1) from a programming standpoint, the most appealing aspects of the series are its production quality and educational value, (2) programs in the series are 'better than average' when compared to other education programming, (3) the programs are very credible, (4) the programs are successful in educating people about what NASA does, and (5) the programs have been 'very well received' by their audiences.

Exer-Genie(Registered Trademark) Exercise Device Hardware Evaluation

NASA Technical Reports Server (NTRS)

Schaffner, Grant; Sharp,Carwyn; Stroud, Leah

2008-01-01

An engineering evaluation was performed on the ExerGenie(r) exercise device to quantify its capabilities and limitations to address questions from the Constellation Program. Three subjects performed rowing and circuit training sessions to assess the suitability of the device for aerobic exercise. Three subjects performed a resistive exercise session to assess the suitability of the device for resistive exercise. Since 1 subject performed both aerobic and resistive exercise sessions, a total of 5 subjects participated.

BrainPort(Registered trademark) Technology Tongue Interface Characterization

DTIC Science & Technology

2010-03-01

22 boards in house. … … … … … Experiment Control Workstation HDA with 2000 to 20,000 electrodes ●●● TCP/IP 10/100 Linux-based Control...Defense Advanced Research Projects Agency HD High Density HDA High Density Array IOD Intra-Oral Device IRB Institutional Review Board Electrode

CMMI (registered trademark) for Services, Version 1.2

DTIC Science & Technology

2009-02-01

background in information technology, especially those familiar with disciplines like service - oriented architecture (SOA) or software as a service ( SaaS ). In... services , the Software Engineering Institute (SEI) has found several dimensions that an organization can focus on to improve its business. Figure...International Business Machines) and the SEI [Humphrey 1989]. Humphrey’s book, Managing the Software Process, provides a CMMI for Services Version 1.2

Orion - Super Koropon(Registered Trademark) Torque/Tension Report

NASA Technical Reports Server (NTRS)

Hemminger, Edgar G.; McLeod, Christopher; Peil, John

2012-01-01

The primary objective of this testing was to obtain torque tension data for the use of Super Koropon Primer Base which was proposed for use on the Orion project. This compound is a corrosion inhibitor/sealer used on threaded fasteners and inserts as specified per NASA/JSC PRC-4004, Sealing of Joints and Faying Surfaces. Some secondary objectives of this testing, were to identify the effect on torque coefficient of several variables. This document contains the outcome of the testing.

The Subchronic Oral Toxicity of 2,4-Dinitroanisole (DNAN) in Rats

DTIC Science & Technology

2012-06-01

Harlan, Teklad; ALPHA-dri® is a registered trademark with Shepard Specialty Papers.) A total of four male and four female rats not placed on study...registered trademark with Shepard Specialty Papers.) Ten males and ten females were distributed into four treatment groups and a vehicle control group...If significant differences were observed, then a Mann~Whitney test was conducted to compare pairs of treatment groups. SPSS® 16.0 ( Chicago

A Study of Data Entry Keyboards: The 4 x 4 Keypad.

DTIC Science & Technology

1985-06-01

Touch-Tone is a registered trademark of Bell Telephone Laboratories, Inc. OThe 0S-3 Event Recorder is a registered trademark of...the standard of • the industry--the Touch-Tone® telephone with a key arrangement adopted after considerable research by human factors engineers at Bell ...calculator manufacturers, a series of * important studies was performed by Peininger (5) of the Bell Laboratories * to establish the keypad array for

19 CFR 133.4 - Effective date, term, and cancellation of trademark recordation and renewals.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of a trademark shall remain in force concurrently with the 20-year current registration period or... registration is finally canceled or revoked. [T.D. 72-266, 37 FR 20678, Oct. 3, 1972, as amended by T.D. 91-77...

19 CFR 133.4 - Effective date, term, and cancellation of trademark recordation and renewals.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of a trademark shall remain in force concurrently with the 20-year current registration period or... registration is finally canceled or revoked. [T.D. 72-266, 37 FR 20678, Oct. 3, 1972, as amended by T.D. 91-77...

Full-Scale Evaluation of DuraDeck (registered trademark) and MegaDeck (trademark) Matting Systems

DTIC Science & Technology

2013-07-01

plates studded with threaded bolts were placed ERDC/GSL TR-13-27 10 underneath two pre-drilled corners of the panel. The plates were positioned so...metal plates studded with threaded ERDC/GSL TR-13-27 4 Figure 1. DuraDeck® mat panel, top surface. Figure 2. DuraDeck® mat panel, bottom surface...ERDC/GSL TR-13-27 5 bolts , as shown in Figure 3, underneath the mat corners and then installing special connector nuts from the top surface

Process Improvement and CMMI (registered trademark) -Developing Complex Systems- Using CMMI (registered trademark) to Achieve Effective Systems and Software Engineering Integration

DTIC Science & Technology

2008-11-01

1952) Microwave (1953) Cell Phone (1983) PC (1975) Source: Rich Kaplan, Microsoft Internet (1975) 90 80 70 60 50 40 30 20 10 0 100 Percentage of O w...nership No. of Years Since Invention Source: Rich Kaplan, Microsoft Automobile = 56 years Telephone = 36 years Television = 26 years Cell phone = 14

Clothing creator trademark : Business plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stern, B.

SYMAGERY has developed a patented process to manufacture clothing without direct human labor. This CLOTHING CREATOR{trademark}, will have the ability to produce two (2) perfect garments every 45 seconds or one (1) every 30 seconds. The process will combine Computer Integrated Manufacturing (CIM) technology with heat molding and ultrasonic bonding/cutting techniques. This system for garment production, will have the capacity to produce garments of higher quality and at lower productions costs than convention cut and sew methods. ADVANTAGES of the process include: greatly reduced production costs; increased quality of garments; reduction in lead time; and capacity to make new classmore » of garments. This technology will accommodate a variety of knit, woven and nonwoven materials containing a majority of synthetic fibers. Among the many style of garments that could be manufactured by this process are: work clothing, career apparel, athletic garments, medical disposables, health care products, activewear, haz/mat garments, military clothing, cleanroom clothing, outdoor wear, upholstery, and highly contoured stuffed toy shells. 3 refs.« less

Hyalella IQ Toxicity Test{trademark} as a predictor of whole sediment toxicity with diversely contaminated sediments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas, W.S.; Hayes, K.R.

1994-12-31

The IQ TOXICITY TEST{trademark} is a toxicity screening test that evaluates the organism`s galactosidase enzyme system functionality as a predictor of acute toxicity. Organisms are exposed to a potentially toxic solution for approximately one hour. Following the exposure, the organisms are exposed to a slurry of a galactoside sugar tagged with a fluorescent marker (methylumbelliferyl galactoside) for 15--20 minutes. A black light can then be used to examine whether the hemolymph of the organism contains free umbelliferone, which brightly fluoresces. The organisms are then scored as ``on`` or ``off`` with respect to free umbelliferone. This endpoint can then be usedmore » to calculate an EC50, which is comparable to a whole effluent, pure compound, or sediment toxicity test. Slightly different methodologies are used for different toxicity test organisms. The objective of this presentation is to discuss the use of the IQ{trademark} methodology with porewater extract exposures of the amphipod Hyalella azteca as a predictor of results of whole sediment toxicity tests. The results of over thirty 10 and 28-day whole sediment toxicity tests and the concurrent Hyalella azteca 10 TOXICITY TESTS{trademark} are compared and discussed. The use of screening tests as a reduced cost method for initial site assessment will be discussed.« less

77 FR 64189 - Changes to Representation of Others Before the United States Patent and Trademark Office

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

...The United States Patent and Trademark Office (Office or USPTO) proposes to align the USPTO's professional responsibility rules with those of most other U.S. jurisdictions by replacing the current Patent and Trademark Office Code of Professional Responsibility, adopted in 1985, based on the 1980 version of the Model Code of Professional Responsibility of the American Bar Association (``ABA''), with new USPTO Rules of Professional Conduct, which are based on the Model Rules of Professional Conduct of the ABA, which were published in 1983, substantially revised in 2003 and updated through 2011. Changes approved by the ABA House of Delegates in August 2012 have not been incorporated in these proposed rules. The Office also proposes to revise the existing procedural rules governing disciplinary investigations and proceedings.

15 CFR 280.323 - Transfer or assignment of the trademark registration or recorded insignia.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF... trademark application or registration which forms the basis of a certificate of recordal, the Director, USPTO, shall designate the certificate of recordal as inactive. The certificate of recordal shall be...

15 CFR 280.323 - Transfer or assignment of the trademark registration or recorded insignia.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF... trademark application or registration which forms the basis of a certificate of recordal, the Director, USPTO, shall designate the certificate of recordal as inactive. The certificate of recordal shall be...

Effects of solvent on solution prepregging of the resin system LaRC{trademark}-IAX-2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cano, R.J.; Massey, C.P.; St. Clair, T.L.

1996-12-31

This work assesses the feasibility of using an alternative solvent for the production of composites from polyimide resin systems via solution prepregging. Previous work on solution prepregging of polyimide systems at NASA Langley Research Center has concentrated on the use of the solvent N-methylpyrrolidinone. An alternative solvent with a similar boiling point, -{gamma}-Butyrolactone, was used to prepare the poly(amide acid) version of LaRC{trademark}-IAX-2. These solutions were subsequently used to prepare prepreg and graphite-reinforced composites. Mechanical properties are presented for the resin system LaRC{trademark}-IAX-2 (4% and 5% offset in stoichiometry and endcapped with phthalic anhydride) impregnated onto Hercules IM7 carbon fiber.more » Results from this work were compared to data obtained on the same resin system which had been solution prepregged with the solvent N-methylpyrrolidinone.« less

26 CFR 1.177-1 - Election to amortize trademark and trade name expenditures.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 3 2012-04-01 2012-04-01 false Election to amortize trademark and trade name expenditures. 1.177-1 Section 1.177-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Itemized Deductions for Individuals and Corporations (continued) § 1.177-1 Election...

Applying ``intelligent`` materials for materials education: The Labless Lab{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrade, J.D.; Scheer, R.

1994-12-31

A very large number of science and engineering courses taught in colleges and universities today do not involve laboratories. Although good instructors incorporate class demonstrations, hands on homework, and various teaching aids, including computer simulations, the fact is that students in such courses often accept key concepts and experimental results without discovering them for themselves. The only partial solution to this problem has been increasing use of class demonstrations and computer simulations. The authors feel strongly that many complex concepts can be observed and assimilated through experimentation with properly designed materials. They propose the development of materials and specimens designedmore » specifically for education purposes. Intelligent and communicative materials are ideal for this purpose. Specimens which respond in an observable fashion to new environments and situations provided by the students/experimenter provide a far more effective materials science and engineering experience than readouts and data generated by complex and expensive machines, particularly in an introductory course. Modern materials can be designed to literally communicate with the observer. The authors embarked on a project to develop a series of Labless Labs{trademark} utilizing various degrees and levels of intelligence in materials. It is expected that such Labless Labs{trademark} would be complementary to textbooks and computer simulations and to be used to provide a reality for students in courses and other learning situations where access to a laboratory is non-existent or limited.« less

Multistage Analysis of Cyber Threats for Quick Mission Impact Assessment (CyberIA)

DTIC Science & Technology

2015-09-01

Corporation. NVIDIA ® is a registered trademark of the NVIDIA Corporation. CUDA™ is a trademark of the NVIDIA Corporation. Released by J. Lee...for developing and integrating different high-performance C/C++ algorithms. This capability is significant because NVIDIA ® CUDA™ architecture

76 FR 31306 - Admittance to Practice and Roster of Registered Patent Attorneys and Agents Admitted to Practice...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... Patent Attorneys and Agents Admitted to Practice Before the United States Patent and Trademark Office... burden, invites the general public and other Federal agencies to take this opportunity to comment on the... William Griffin, Staff Attorney, Office of Enrollment and Discipline, United States Patent and Trademark...

Xyce Parallel Electronic Simulator Reference Guide Version 6.4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Mei, Ting; Russo, Thomas V.

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide [1] . Trademarks The information herein is subject to change without notice. Copyright c 2002-2015 Sandia Corporation. All rights reserved. Xyce TM Electronic Simulator and Xyce TMmore » are trademarks of Sandia Corporation. Portions of the Xyce TM code are: Copyright c 2002, The Regents of the University of California. Produced at the Lawrence Livermore National Laboratory. Written by Alan Hindmarsh, Allan Taylor, Radu Serban. UCRL-CODE-2002-59 All rights reserved. Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks of Amtec Engineering, Inc. Xyce 's expression library is based on that inside Spice 3F5 developed by the EECS Department at the University of California. The EKV3 MOSFET model was developed by the EKV Team of the Electronics Laboratory-TUC of the Technical University of Crete. All other trademarks are property of their respective owners. Contacts Bug Reports (Sandia only) http://joseki.sandia.gov/bugzilla http://charleston.sandia.gov/bugzilla World Wide Web http://xyce.sandia.gov http://charleston.sandia.gov/xyce (Sandia only) Email xyce@sandia.gov (outside Sandia) xyce-sandia@sandia.gov (Sandia only)« less

31 CFR 500.527 - Certain transactions with respect to United States patents, trademarks, and copyrights.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) There are hereby authorized: (1) The filing in the United States Patent Office of applications for... States Patent Office of applications for letters patent and for trademarks registration; (4) The receipt... any instrument recordable in the United States Patent Office or the United States Copyright Office...

37 CFR 1.351 - Amendments to rules will be published.

Code of Federal Regulations, 2010 CFR

2010-07-01

... published. 1.351 Section 1.351 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE... Rules § 1.351 Amendments to rules will be published. All amendments to the regulations in this part will be published in the Official Gazette and in the Federal Register. ...

31 CFR 535.528 - Certain transactions with respect to Iranian patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2013 CFR

2013-07-01

... currently due to the government of Iran, either directly or through an attorney or representative, in... customary fees currently due to attorneys or representatives in Iran incurred in connection with any of the..., petty patent, design patent, trademark or copyright issued by Iran. [45 FR 29288, May 2, 1980] ...

31 CFR 535.528 - Certain transactions with respect to Iranian patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2012 CFR

2012-07-01

... currently due to the government of Iran, either directly or through an attorney or representative, in... customary fees currently due to attorneys or representatives in Iran incurred in connection with any of the..., petty patent, design patent, trademark or copyright issued by Iran. [45 FR 29288, May 2, 1980] ...

31 CFR 535.528 - Certain transactions with respect to Iranian patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2014 CFR

2014-07-01

... currently due to the government of Iran, either directly or through an attorney or representative, in... customary fees currently due to attorneys or representatives in Iran incurred in connection with any of the..., petty patent, design patent, trademark or copyright issued by Iran. [45 FR 29288, May 2, 1980] ...

31 CFR 535.528 - Certain transactions with respect to Iranian patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2011 CFR

2011-07-01

... currently due to the government of Iran, either directly or through an attorney or representative, in... customary fees currently due to attorneys or representatives in Iran incurred in connection with any of the..., petty patent, design patent, trademark or copyright issued by Iran. [45 FR 29288, May 2, 1980] ...

31 CFR 535.528 - Certain transactions with respect to Iranian patents, trademarks and copyrights authorized.

Code of Federal Regulations, 2010 CFR

2010-07-01

... currently due to the government of Iran, either directly or through an attorney or representative, in... customary fees currently due to attorneys or representatives in Iran incurred in connection with any of the..., petty patent, design patent, trademark or copyright issued by Iran. [45 FR 29288, May 2, 1980] ...

Development of a Comprehensive Seismic Yield Estimation System for Underground Nuclear Explosions

DTIC Science & Technology

1993-05-01

Inc. SPOT data are copyrighted by CNES (1986,1987). UNIX is a registered trademark of AT&T Bell Laboratories. FrameMaker is a registered trademark of...interface to the desktop publishing package FrameMaker , version 3.0 X, which allows the user to generate, edit and print a report of the analysis. Startup...if you’re sure. 3. Logout of UNIX at the console. FrameMaker Instructions FrameMaker version 3.0 X or later must be set up on the Sun work- station as

Windows(Registered Trademark)-Based Software Models Cyclic Oxidation Behavior

NASA Technical Reports Server (NTRS)

Smialek, J. L.; Auping, J. V.

2004-01-01

Oxidation of high-temperature aerospace materials is a universal issue for combustion-path components in turbine or rocket engines. In addition to the question of the consumption of material due to growth of protective scale at use temperatures, there is also the question of cyclic effects and spallation of scale on cooldown. The spallation results in the removal of part of the protective oxide in a discontinuous step and thereby opens the way for more rapid oxidation upon reheating. In experiments, cyclic oxidation behavior is most commonly characterized by measuring changes in weight during extended time intervals that include hundreds or thousands of heating and cooling cycles. Weight gains occurring during isothermal scale-growth processes have been well characterized as being parabolic or nearly parabolic functions of time because diffusion controls reaction rates. In contrast, the net weight change in cyclic oxidation is the sum of the effects of the growth and spallation of scale. Typically, the net weight gain in cyclic oxidation is determined only empirically (that is, by measurement), with no unique or straightforward mathematical connection to either the rate of growth or the amount of metal consumed. Thus, there is a need for mathematical modeling to infer spallation mechanisms. COSP is a computer program that models the growth and spallation processes of cyclic oxidation on the basis of a few elementary assumptions that were discussed in COSP: A Computer Model of Cyclic Oxidation, Oxidation of Metals, vol. 36, numbers 1 and 2, 1991, pages 81-112. Inputs to the model include the selection of an oxidation-growth law and a spalling geometry, plus oxide-phase, growth-rate, cycle-duration, and spall-constant parameters. (The spalling fraction is often shown to be a constant factor times the existing amount of scale.) The output of COSP includes the net change in weight, the amounts of retained and spalled oxide, the total amounts of oxygen and metal consumed, and the terminal rates of weight loss and metal consumption.

DARPA Improving Warfighter Information Intake Under Stress -- Augmented Cognition. Volume 1. Phase 2: Concept Validation Experiment

DTIC Science & Technology

2006-09-01

trademark of the Boeing Company. Mercedes - Benz ® is a registered trademark of DaimlerChrysler AG Corporation. Released by R. J. Smillie, Head...Team DCC CLIP architecture. 2.2.4 Methodology The test conditions for the DCC team consisted of an instrumented Mercedes Benz ® S class vehicle

VentureStar(trademark) Reaping the Benefits of the X-33 Program

NASA Technical Reports Server (NTRS)

Sumrall, J.; Lane, C.

1998-01-01

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar(trademark), the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar(trademark) are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21 st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream.

75 FR 27611 - Self-Regulatory Organizations; NASDAQ OMX PHLX, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

...) are registered trademarks of The NASDAQ OMX Group, Inc. (which with its affiliates are the... Registered Options Traders (on-floor) and Specialists; (ii) amending the current options transaction charge for Registered Options Traders (on-floor) and Specialists and applying that charge and the options...

A Scandinavian experience of register collaboration: the Nordic Arthroplasty Register Association (NARA).

PubMed

Havelin, Leif I; Robertsson, Otto; Fenstad, Anne M; Overgaard, Søren; Garellick, Göran; Furnes, Ove

2011-12-21

The Nordic (Scandinavian) countries have had working arthroplasty registers for several years. However, the small numbers of inhabitants and the conformity within each country with respect to preferred prosthesis brands and techniques have limited register research. A collaboration called NARA (Nordic Arthroplasty Register Association) was started in 2007, resulting in a common database for Denmark, Norway, and Sweden with regard to hip replacements in 2008 and primary knee replacements in 2009. Finland joined the project in 2010. A code set was defined for the parameters that all registers had in common, and data were re-coded, within each national register, according to the common definitions. After de-identification of the patients, the anonymous data were merged into a common database. The first study based on this common database included 280,201 hip arthroplasties and the second, 151,814 knee arthroplasties. Kaplan-Meier and Cox multiple regression analyses, with adjustment for age, sex, and diagnosis, were used to calculate prosthesis survival, with any revision as the end point. In later studies, specific reasons for revision were also used as end points. We found differences among the countries concerning patient demographics, preferred surgical approaches, fixation methods, and prosthesis brands. Prosthesis survival was best in Sweden, where cement implant fixation was used more commonly than it was in the other countries. As the comparison of national results was one of the main initial aims of this collaboration, only parameters and data that all three registers could deliver were included in the database. Compared with each separate register, this combined register resulted in reduced numbers of parameters and details. In future collaborations of registers with a focus on comparing the performances of prostheses and articulations, we should probably include only the data needed specifically for the predetermined purposes, from registers that can

Simulation of n-qubit quantum systems. I. Quantum registers and quantum gates

NASA Astrophysics Data System (ADS)

Radtke, T.; Fritzsche, S.

2005-12-01

During recent years, quantum computations and the study of n-qubit quantum systems have attracted a lot of interest, both in theory and experiment. Apart from the promise of performing quantum computations, however, these investigations also revealed a great deal of difficulties which still need to be solved in practice. In quantum computing, unitary and non-unitary quantum operations act on a given set of qubits to form (entangled) states, in which the information is encoded by the overall system often referred to as quantum registers. To facilitate the simulation of such n-qubit quantum systems, we present the FEYNMAN program to provide all necessary tools in order to define and to deal with quantum registers and quantum operations. Although the present version of the program is restricted to unitary transformations, it equally supports—whenever possible—the representation of the quantum registers both, in terms of their state vectors and density matrices. In addition to the composition of two or more quantum registers, moreover, the program also supports their decomposition into various parts by applying the partial trace operation and the concept of the reduced density matrix. Using an interactive design within the framework of MAPLE, therefore, we expect the FEYNMAN program to be helpful not only for teaching the basic elements of quantum computing but also for studying their physical realization in the future. Program summaryTitle of program:FEYNMAN Catalogue number:ADWE Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWE Program obtainable from:CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions:None Computers for which the program is designed:All computers with a license of the computer algebra system MAPLE [Maple is a registered trademark of Waterlo Maple Inc.] Operating systems or monitors under which the program has been tested:Linux, MS Windows XP Programming language used:MAPLE 9.5 (but should be compatible

Evaluation of a Gentex (registered trademark) ORO-NASAL Oxygen Mask for Integration with the Aqualung (registered trademark) Personal Helicopter Oxygen Delivery System (PHODS)

DTIC Science & Technology

2008-07-13

the hypobaric facility. • Dr. Arnold Angelici and Mr. Robert Shaffstall of the FAA/CAMI for their expertise and invaluable participation during the...10 7. FAA Research Hypobaric (Altitude) Chamber...12 Figure 7. FAA Research Hypobaric (Altitude) Chamber. Procedures

Register file soft error recovery

DOEpatents

Fleischer, Bruce M.; Fox, Thomas W.; Wait, Charles D.; Muff, Adam J.; Watson, III, Alfred T.

2013-10-15

Register file soft error recovery including a system that includes a first register file and a second register file that mirrors the first register file. The system also includes an arithmetic pipeline for receiving data read from the first register file, and error detection circuitry to detect whether the data read from the first register file includes corrupted data. The system further includes error recovery circuitry to insert an error recovery instruction into the arithmetic pipeline in response to detecting the corrupted data. The inserted error recovery instruction replaces the corrupted data in the first register file with a copy of the data from the second register file.

77 FR 3001 - Certain Agricultural Vehicles and Components Thereof Final Determination; Reinstatement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-20

... (``EV'') self-propelled forage harvesters (``SPFHs'') by reason of infringement of U.S. Registered Trademarks Nos. 1,254,339; 1,502,103; 1,503,576; 91,860; and 2,729,766. In the original investigation, the... market trademark infringement and, accordingly, is entitled to a determination of violation of section...

37 CFR 2.52 - Types of drawings and format for drawings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Types of drawings and format... OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Drawing § 2.52 Types of drawings and... two types of drawings: (a) Standard character (typed) drawing. Applicants who seek to register words...

Processor register error correction management

DOEpatents

Bose, Pradip; Cher, Chen-Yong; Gupta, Meeta S.

2016-12-27

Processor register protection management is disclosed. In embodiments, a method of processor register protection management can include determining a sensitive logical register for executable code generated by a compiler, generating an error-correction table identifying the sensitive logical register, and storing the error-correction table in a memory accessible by a processor. The processor can be configured to generate a duplicate register of the sensitive logical register identified by the error-correction table.

37 CFR 2.154 - Publication in Official Gazette.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Publication in Official..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.154 Publication in Official Gazette. A notice of the claim of benefits under the Act of 1946 and a...

37 CFR 2.154 - Publication in Official Gazette.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Publication in Official..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.154 Publication in Official Gazette. A notice of the claim of benefits under the Act of 1946 and a...

75 FR 39493 - United States Patent and Trademark Office Draft Strategic Plan for FY 2010-2015

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

... plan includes the USPTO's mission statement, vision statement and a description of the strategic goals... achieve its vision. Full details on how the USPTO plans to implement the strategic plan, including funding...] United States Patent and Trademark Office Draft Strategic Plan for FY 2010-2015 AGENCY: United States...

Tobacco industry argues domestic trademark laws and international treaties preclude cigarette health warning labels, despite consistent legal advice that the argument is invalid

PubMed Central

Crosbie, Eric; Glantz, Stanton A

2013-01-01

Objectives To analyse the tobacco industry’s use of international trade agreements to oppose policies to strengthen health warning labels (HWLs). Design A review of tobacco industry documents, tobacco control legislation and international treaties. Results During the early 1990s, the tobacco industry became increasingly alarmed about the advancement of HWLs on cigarettes packages. In response, it requested legal opinions from British American Tobacco’s law firms in Australia and England, Britain’s Department of Trade and Industry and the World Intellectual Property Organisation on the legality of restricting and prohibiting the use of their trademarks, as embodied in cigarette packages. The consistent legal advice, privately submitted to the companies, was that international treaties do not shield trademark owners from government limitations (including prohibition) on the use of their trademarks. Despite receiving this legal advice, the companies publicly argued that requiring large HWLs compromised their trademark rights under international treaties. The companies successfully used these arguments as part of their successful effort to deter Canadian and Australian governments from enacting laws requiring the plan packaging of cigarettes, which helped delay large graphic HWLs, including ‘plain’ packaging, for over a decade. Conclusions Governments should not be intimidated by tobacco company threats and unsubstantiated claims, and carefully craft HWL laws to withstand the inevitable tobacco industry lawsuits with the knowledge that the companies’ own lawyers as well as authoritative bodies have told the companies that the rights they claim do not exist. PMID:23179728

Tobacco industry argues domestic trademark laws and international treaties preclude cigarette health warning labels, despite consistent legal advice that the argument is invalid.

PubMed

Crosbie, Eric; Glantz, Stanton A

2014-05-01

To analyse the tobacco industry's use of international trade agreements to oppose policies to strengthen health warning labels (HWLs). A review of tobacco industry documents, tobacco control legislation and international treaties. During the early 1990s, the tobacco industry became increasingly alarmed about the advancement of HWLs on cigarettes packages. In response, it requested legal opinions from British American Tobacco's law firms in Australia and England, Britain's Department of Trade and Industry and the World Intellectual Property Organisation on the legality of restricting and prohibiting the use of their trademarks, as embodied in cigarette packages. The consistent legal advice, privately submitted to the companies, was that international treaties do not shield trademark owners from government limitations (including prohibition) on the use of their trademarks. Despite receiving this legal advice, the companies publicly argued that requiring large HWLs compromised their trademark rights under international treaties. The companies successfully used these arguments as part of their successful effort to deter Canadian and Australian governments from enacting laws requiring the plan packaging of cigarettes, which helped delay large graphic HWLs, including 'plain' packaging, for over a decade. Governments should not be intimidated by tobacco company threats and unsubstantiated claims, and carefully craft HWL laws to withstand the inevitable tobacco industry lawsuits with the knowledge that the companies' own lawyers as well as authoritative bodies have told the companies that the rights they claim do not exist.

Simulating the Response of a Composite Honeycomb Energy Absorber. Part 2; Full-Scale Impact Testing

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Annett, Martin S.; Jackson, Karen E.; Polanco, Michael A.

2012-01-01

NASA has sponsored research to evaluate an externally deployable composite honeycomb designed to attenuate loads in the event of a helicopter crash. The concept, designated the Deployable Energy Absorber (DEA), is an expandable Kevlar(Registered TradeMark) honeycomb. The DEA has a flexible hinge that allows the honeycomb to be stowed collapsed until needed during an emergency. Evaluation of the DEA began with material characterization of the Kevlar(Registered TradeMark)-129 fabric/epoxy, and ended with a full-scale crash test of a retrofitted MD-500 helicopter. During each evaluation phase, finite element models of the test articles were developed and simulations were performed using the dynamic finite element code, LS-DYNA(Registered TradeMark). The paper will focus on simulations of two full-scale impact tests involving the DEA, a mass-simulator and a full-scale crash of an instrumented MD-500 helicopter. Isotropic (MAT24) and composite (MAT58) material models, which were assigned to DEA shell elements, were compared. Based on simulations results, the MAT58 model showed better agreement with test.

Expanding the Intellectual Property Knowledge Base at University Libraries: Collaborating with Patent and Trademark Resource Centers

ERIC Educational Resources Information Center

Wallace, Martin; Reinman, Suzanne

2018-01-01

Patent and Trademark Resource Centers are located in libraries throughout the U.S., with 43 being in academic libraries. With the importance of incorporating a knowledge of intellectual property (IP) and patent research in university curricula nationwide, this study developed and evaluated a partnership program to increase the understanding of IP…

37 CFR 2.155 - Notice of publication.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Notice of publication. 2.155... COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.155 Notice of publication. The Office will send the registrant a notice of publication of the mark and of the...

37 CFR 2.155 - Notice of publication.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Notice of publication. 2.155... COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.155 Notice of publication. The Office will send the registrant a notice of publication of the mark and of the...

39 CFR 221.7 - Postal Service emblem.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Service emblem. The Postal Service emblem, which is identical with the seal, is registered as a trademark... must bear one of the following notations: “Reg. U.S. Pat. Off.”, “Registered in U.S. Patent Office”, or...

The accuracy of age—sex registers, practice medical records and family practitioner committee registers

PubMed Central

Fraser, Robin C.; Clayton, David G.

1981-01-01

This paper presents the results of a point prevalent evaluation of the comparative reliability and validity of age-sex registers, practice medical records and family practitioner committee (FPC) registers from five teaching practices. They all exhibited similar levels of acceptable accuracy for patient names, sex and age, but the distribution of wrong addresses varied greatly: practice medical records 3·9 per cent, age-sex registers 8·2 per cent and FPC registers 17·1 per cent. The presence of a patient entry in all three registers was associated with a high degree of probability (95·3 per cent) that this individual would be a bona fide practice patient. The register population inflation rates were FPC records 5·5 per cent, practice records 9·8 per cent and age-sex registers 10·6 per cent, but there were large variations between individual practices. A statistically significant contribution to inflation rates came from the age groups 0 to 1 and 21 to 40 (p<0·0005). The register population deflation rates were minimal. The significance of these findings is discussed and the need for practices to determine the accuracy of their individual age-sex registers is stressed. A convenient and economic method for so doing is suggested. We also suggest ways of making it easier to construct and use age-sex registers, since they can be a most versatile and useful aid to research in general practice. ImagesFigure 1. PMID:7320986

Lightweight Metal Matrix Composite Segmented for Manufacturing High-Precision Mirrors

NASA Technical Reports Server (NTRS)

Vudler, Vladimir

2012-01-01

High-precision mirrors for space applications are traditionally manufactured from one piece of material, such as lightweight glass sandwich or beryllium. The purpose of this project was to develop and test the feasibility of a manufacturing process capable of producing mirrors out of welded segments of AlBeMet(Registered Trademark) (AM162H). AlBeMet(Registered Trademark) is a HIP'd (hot isostatic pressed) material containing approximately 62% beryllium and 38% aluminum. As a result, AlBeMet shares many of the benefits of both of those materials for use in high performance mirrors, while minimizing many of their weaknesses.

Ada Compiler Validation Summary Report: Certificate Number: 911028I1. 11229 Telesoft, Telegen2, Ada Development System, for VAX to 1750, Version 3.25, MicroVAX 3800 under VAX/VMS Version V5.4 (Host) to MIL-STD-1750A ECSPO ITS RAID Simulator, Version 6.0 (Target)

DTIC Science & Technology

1991-10-28

included as appropriate. 2-1 IMPLEMENTATION DEPENDENCIES The following 185 tests have floating-point type declarations requiring more digits than...SYSTEM.MAX DIGITS : C24113F..Y (20 tests) C? 705F..Y (20 tests) C35706F..Y (20 tests) C35707F..Y (20 tests) C35708F..Y (20 tests) C35802F..Z (21 tests...trademark of Teleoft. TeleGen2m is a trademark of TeleSofL VAX and VMS! are registered trademarks of Digital Equipment Corp. RESTRICTED RIGHTS LEGEND Use

Xyce Parallel Electronic Simulator - Users' Guide Version 2.1.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchinson, Scott A; Hoekstra, Robert J.; Russo, Thomas V.

, designed to meet the unique needs of the laboratory.4 XyceTMUsers' GuideAcknowledgementsThe authors would like to acknowledge the entire Sandia National Laboratories HPEMS(High Performance Electrical Modeling and Simulation) team, including Steve Wix, CarolynBogdan, Regina Schells, Ken Marx, Steve Brandon and Bill Ballard, for their support onthis project. We also appreciate very much the work of Jim Emery, Becky Arnold and MikeWilliamson for the help in reviewing this document.Lastly, a very special thanks to Hue Lai for typesetting this document with LATEX.TrademarksThe information herein is subject to change without notice.Copyrightc 2002-2003 Sandia Corporation. All rights reserved.XyceTMElectronic Simulator andXyceTMtrademarks of Sandia Corporation.Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence DesignSystems, Inc.Silicon Graphics, the Silicon Graphics logo and IRIX are registered trademarks of SiliconGraphics, Inc.Microsoft, Windows and Windows 2000 are registered trademark of Microsoft Corporation.Solaris and UltraSPARC are registered trademarks of Sun Microsystems Corporation.Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation.HP and Alpha are registered trademarks of Hewlett-Packard company.Amtec and TecPlot are trademarks of Amtec Engineering, Inc.Xyce's expression library is based on that inside Spice 3F5 developed by the EECS De-partment at the University of California.All other trademarks are property of their respective owners.ContactsBug Reportshttp://tvrusso.sandia.gov/bugzillaEmailxyce-support%40sandia.govWorld Wide Webhttp://www.cs.sandia.gov/xyce5 XyceTMUsers' GuideThis page is left intentionally blank6« less

78 FR 42758 - Extension of Comment Period for Request of the United States Patent and Trademark Office for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... other voluntary initiatives to reduce intellectual property infringement that occurs on-line--such as... other voluntary initiatives to reduce intellectual property infringement that occurs on-line--such as... Commerce for Intellectual Property and Acting Director of the United States Patent and Trademark Office...

Expansion Coefficient on Oxides and Oxide Ceramics.

DTIC Science & Technology

1986-05-01

permeability and cannot be used for laser gyros. Zerodur cannot be used for all laser gyro applications because it is unstable on thermal cycling between -23...and 177*C (-9 and 3500 F), which is the operational range of laser gyros. Furthermore, Zerodur is not of a reproducibly acceptable quality nor is it... Zerodur and Corning’s ULE (type 7971) for use in applications requiring ultra-low thermal expansivity. There are times when neither ULE nor Zerodur are

The AMTEX Partnership{trademark} mid year report, fiscal year 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-03-01

The AMTEX Partnership{trademark} is a collaborative research and development program among the US Integrated Textile Complex (ITC), the US Department of Energy (DOE), the DOE national laboratories, other federal agencies and laboratories, and universities. The goal of AMTEX is to strengthen the competitiveness of this vital industry, thereby preserving and creating US jobs. Three AMTEX projects funded in FY 1997 are Diamond Activated Manufacturing Architecture (DAMA), Computer-Aided Fabric Evaluation (CAFE), and Textile Resource Conservation (TReC). The five sites involved in AMTEX work are Sandia National Laboratory (SNL), Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), the Oak Ridgemore » Y-12 Plant, and the Oak Ridge National Laboratory (ORNL) (the latter is funded through Y-12).« less

The Danish Adoption Register.

PubMed

Petersen, Liselotte; Sørensen, Thorkild I A

2011-07-01

The Danish Adoption Register was established in 1963-1964 to explore the genetic and environmental contribution to familial aggregation of schizophrenia. The register encompass information on all 14,425 non-familial adoptions of Danish children legally granted in Denmark 1924-1947. It includes name and date of birth of each adoptee and his or her biological and adoptive parents, date of transfer to adoptive parents and date of formal adoption. The linkage to biological and adoptive parents is close to complete, even biological fathers are registered for 91.4% of the adoptees. Adoption registers are a unique source allowing disentangling of genetic and familial environmental influences on traits, risk of diseases, and mortality.

Do Joint Fighter Programs Save Money? Technical Appendixes on Methodology

DTIC Science & Technology

2013-01-01

Bookstore Make a charitable contribution Limited Electronic Distribution Rights This document and trademark(s) contained herein are protected by...research clients and sponsors. Support RAND—make a tax-deductible charitable contribution at www.rand.org/giving/contribute.html R® is a registered...Evidence, Organisation for Economic Co-Operation and Development, Economics Department Working Paper 317, January 17, 2002. Anderson, Fred, Northrop

Industrial ecology Prosperity Game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, D.; Boyack, K.; Berman, M.

1998-03-01

Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the systemmore » boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.« less

Physics of Systematic Frequency Variations in Hydrogen Masers

DTIC Science & Technology

1990-12-01

X expansivity a of the material of which the cavity is constructed (a-10-8 OC-1 for low-expansion materials like Cervit or Zerodur , L T ~ a...of the bulk cavity material itself. Such shrinkage has been observed in gauge-blocks of Zerodud and ULE9 and in Zerodur and ULE laser etalons8, and...repositioned or retuned after being moved. Material Zerodur 1 initial after 10 yrs Zerodur2 initial3 after 900 days U L E ~ initial after 20 days High

Effect of thermal cycling. Final report, April 1985-January 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobs, S.F.

The objective of this effort is to evaluate the stability of low expansion Zerodur, developmental Zerodur, ULE, and Cer-Vit as possible substrate materials for high energy laser mirrors. This effort will determine whether there is instability in developmental Zerodur, ULE and Cer-Vit over operating temperatures and coating temperatures (300-475K). Zerodur has already been shown to exhibit instability. Thermal cycling will be investigated as a possible approach to eliminate or reduce hysteresis. The effect of polishing on hysteresis will also be investigated.

Effect of thermal cycling

NASA Astrophysics Data System (ADS)

Jacobs, Stephen F.

1988-05-01

The objective of this effort is to evaluate the stability of low expansion Zerodur, developmental Zerodur, ULE, and Cer-Vit as possible substrate materials for high energy laser mirrors. This effort will determine whether there is instability in developmental Zerodur, ULE and Cer-Vit over operating temperatures and coating temperatures (300 to 475 K). Zerodur has already been shown to exhibit instability. Thermal cycling will be investigated as a possible approach to eliminate or reduce hysteresis. The effect of polishing on hysteresis will also be investigated.

Implementation of Geometric Algebra in MATLAB (registered trademark) with Applications

DTIC Science & Technology

2014-09-01

HHH HHHH HHHH HH HHH HHH HHHH P r C r O 6 HHHj ~A ~B Figure 1: Pinhole...is given by the similar map L 7→ P ∨ (C ∧ L) . (66) The result is the unique line of intersection of two planes. HHH HHH HHHH HH H HHH HHH HHH HH Pα...Pβ r Cα r Cβ rOαβ rOβα HH HHH HHH HHH HHH HH H HH H HH rX rXα rXβ A A A A

POSS(Registered TradeMark) Coatings for Solar Cells: An Update

NASA Technical Reports Server (NTRS)

Brandhorst, Henry; Isaacs-Smith, Tamara; Wells, Brian; Lichtenhan, Joseph D.; Fu, Bruce X.

2007-01-01

Presently, solar cells are covered with Ce-doped microsheet cover glasses that are attached with Dow Corning DC 93-500 silicone adhesive. Various antireflection coatings are often applied to the cover glass to increase cell performance. This general approach has been used from the beginning of space exploration. However, it is expensive and time consuming. Furthermore, as the voltage of solar arrays increases, significant arcing has occurred in solar arrays, leading to loss of satellite power. The cause has been traced to differential voltages between strings and the close spacing between them with no insulation covering the edges of the solar cells. In addition, this problem could be ameliorated if the cover glass extended over the edges of the cell, but this would impact packing density. An alternative idea that might solve all these issues and be less expensive and more protective is to develop a coating that could be applied over the entire array. Such a coating must be resistant to atomic oxygen for low earth orbits below about 700 km, it must be resistant to ultraviolet radiation for all earth and near-sun orbits and, of course, it must withstand the damaging effects of space radiation. Coating flexibility would be an additional advantage. Based on past experience, one material that has many of the desired attributes of a universal protective coating is the Dow Corning DC 93-500. Of all the potential optical plastics, it appears to be the most suitable for use in space. As noted above, DC 93-500 has been extensively used to attach cover glasses to crystalline solar cells and has worked exceptionally well over the years. It is flexible and generally resistant to electrons, protons and ultraviolet (UV and VUV) radiation; although a VUV-rejection coating or VUV-absorbing ceria-doped cover glass may be required for long mission durations. It can also be applied in a thin coating (< 25 m) by conventional liquid coating processes. Unfortunately, when exposed to atomic oxygen (AO) DC 93-500 develops a frosty surface. Such frosting can lead to a loss of light transmitted into the cells and destroy the essential clarity needed for a concentrator lens.

Near Net Shape Rapid Manufacture & Repair by LENS(registered trademark)

DTIC Science & Technology

2006-05-01

J. Vlcek, “Property Investigation of Laser Cladded , Laser Sintered and Electron Beam Sintered Ti 6Al 4V”, AVT-139 Specialists Meeting on Cost...manufactured from advanced materials such as titanium alloys, superalloys or special steels are critical to the performance of the armed forces...10 years, CAD driven, additive manufacturing technologies have been developed. The leading technology for defence applications is Laser Engineered

CMMI (registered trademark) for Services (CMMI-SVC) Overview for Workshop

DTIC Science & Technology

2008-08-01

is from “DoD throws light on how it buys services [GCN 2006].” GAO data is from GAO report GAO-07-20. 5 CMMI for Services (CMMI-SVC) Forrester...Service Addition PAs 3 5 1 22 % of CMMI-DEV PAs are reused; % of Corporate Investments are potentially r usable! CMMI-DEV CMMI-ACQ CMMI-SVC 77...Service Modifications: •  21 amplification in 7 PAs •  5 added references •  1 modified PA (REQM) •  1 specific goal •  2 specific practices

This Bud's for You: Understanding International Intellectual Property Law through the Ongoing Dispute over the Budweiser Trademark

ERIC Educational Resources Information Center

Bird, Robert C.

2006-01-01

There is little doubt that topics related to beer would be of some interest to college students. Anheuser-Busch, well known for its Budweiser beer and humorous advertising, faces a global trademark challenge to its "Budweiser" name. This battle between a global American company and a small Czech brewery is an opportunity for interesting…

How Shorebilly Brewing Company Won the Trademark Battle, but Lost the War: A Cautionary Tale for Entrepreneurs

ERIC Educational Resources Information Center

Koval, Michael R.

2018-01-01

This article demonstrates how the case at hand, Teal Bay Alliances, LLC v. Southbound One, Inc., can be used as the core of a business case to teach students not only the basics of trademark law, but also as a real-world cautionary tale whose moral boils down to this: lawyers and businesspeople approach legal disputes from very different…

Software Process Automation: Interviews, Survey, and Workshop Results.

DTIC Science & Technology

1997-10-01

International Business Machines Coproration Foundation is a pending trademark of Foundation Software , Inc. FrameMaker is a registered trademark of Adobe, Inc...amount of technology Integration of technologies, con- flicting points of view between adopting org. and consultants E CM FrameMaker Labor/resource...Weaver FrameMaker , CM System Integration of CM tool L InConcert Cadre, AutoPlan, DBStar Ineffective process integration, poor training, time

Radio Signal Augmentation for Improved Training of a Convolutional Neural Network

DTIC Science & Technology

2016-09-01

official government endorsement or approval of commercial products or services referenced in this report. Bluetooth ® is a registered...trademark of Bluetooth SIG, Inc.. Nuand™ and blade RF™ are trademarks of Nurand, LLC. Released by E. R. Buckland, Head IO Support to National... Bluetooth ® computer mouse, and Bluetooth ® search from a mobile cellular phone. Qualitatively, model Moffset dramatically outperformed model Mclean in

Xyce Parallel Electronic Simulator Users' Guide Version 6.7.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Aadithya, Karthik Venkatraman; Mei, Ting

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: Capability to solve extremely large circuit problems by supporting large-scale parallel com- puting platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one tomore » develop new types of analysis without requiring the implementation of analysis-specific device models. Device models that are specifically tailored to meet Sandia's needs, including some radiation- aware devices (for Sandia users only). Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase -- a message passing parallel implementation -- which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows. The information herein is subject to change without notice. Copyright c 2002-2017 Sandia Corporation. All rights reserved. Trademarks Xyce TM Electronic Simulator and Xyce TM are trademarks of Sandia Corporation. Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks

Systematic review of tonsil surgery quality registers and introduction of the Nordic Tonsil Surgery Register Collaboration.

PubMed

Ruohoalho, Johanna; Østvoll, Eirik; Bratt, Mette; Bugten, Vegard; Bäck, Leif; Mäkitie, Antti; Ovesen, Therese; Stalfors, Joacim

2018-06-01

Surgical quality registers provide tools to measure and improve the outcome of surgery. International register collaboration creates an opportunity to assess and critically evaluate national practices, and increases the size of available datasets. Even though millions of yearly tonsillectomies and tonsillotomies are performed worldwide, clinical practices are variable and inconsistency of evidence regarding the best clinical practice exists. The need for quality improvement actions is evident. We aimed to systematically investigate the existing tonsil surgery quality registers found in the literature, and to provide a thorough presentation of the planned Nordic Tonsil Surgery Register Collaboration. A systematic literature search of MEDLINE and EMBASE databases (from January 1990 to December 2016) was conducted to identify registers, databases, quality improvement programs or comprehensive audit programs addressing tonsil surgery. We identified two active registers and three completed audit programs focusing on tonsil surgery quality registration. Recorded variables were fairly similar, but considerable variation in coverage, number of operations included and length of time period for inclusion was discovered. Considering tonsillectomies and tonsillotomies being among the most commonly performed surgical procedures in otorhinolaryngology, it is surprising that only two active registers could be identified. We present a Nordic Tonsil Surgery Register Collaboration-an international tonsil surgery quality register project aiming to provide accurate benchmarks and enhance the quality of tonsil surgery in Denmark, Finland, Norway and Sweden.

PSTOOLS - FOUR PROGRAMS THAT INTERPRET/FORMAT POSTSCRIPT FILES

NASA Technical Reports Server (NTRS)

Choi, D.

1994-01-01

PSTOOLS is a package of four programs that operate on files written in the page description language, PostScript. The programs include a PostScript previewer for the IRIS workstation, a PostScript driver for the Matrix QCRZ film recorder, a PostScript driver for the Tektronix 4693D printer, and a PostScript code beautifier that formats PostScript files to be more legible. The three programs PSIRIS, PSMATRIX, and PSTEK are similar in that they all interpret the PostScript language and output the graphical results to a device, and they support color PostScript images. The common code which is shared by these three programs is included as a library of routines. PSPRETTY formats a PostScript file by appropriately indenting procedures and code delimited by "saves" and "restores." PSTOOLS does not use Adobe fonts. PSTOOLS is written in C-language for implementation on SGI IRIS 4D series workstations running IRIX 3.2 or later. A README file and UNIX man pages provide information regarding the installation and use of the PSTOOLS programs. A six-page manual which provides slightly more detailed information may be purchased separately. The standard distribution medium for this package is one .25 inch streaming magnetic tape cartridge in UNIX tar format. PSIRIS (the largest program) requires 1.2Mb of main memory. PSMATRIX requires the "gpib" board (IEEE 488) available from Silicon Graphics. Inc. The programs with graphical interfaces require that the IRIS have at least 24 bit planes. This package was developed in 1990 and updated in 1991. SGI, IRIS 4D, and IRIX are trademarks of Silicon Graphics, Inc. Matrix QCRZ is a registered trademark of the AGFA Group. Tektronix 4693D is a trademark of Tektronix, Inc. Adobe is a trademark of Adobe Systems Incorporated. PostScript is a registered trademark of Adobe Systems Incorporated. UNIX is a registered trademark of AT&T Bell Laboratories.

1 CFR 11.2 - Federal Register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Federal Register. 11.2 Section 11.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER AVAILABILITY OF OFFICE OF THE FEDERAL REGISTER PUBLICATIONS SUBSCRIPTIONS § 11.2 Federal Register. (a) The subscription price for the paper edition of the...

1 CFR 11.2 - Federal Register.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Federal Register. 11.2 Section 11.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER AVAILABILITY OF OFFICE OF THE FEDERAL REGISTER PUBLICATIONS SUBSCRIPTIONS § 11.2 Federal Register. (a) The subscription price for the paper edition of the...

1 CFR 11.2 - Federal Register.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Federal Register. 11.2 Section 11.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER AVAILABILITY OF OFFICE OF THE FEDERAL REGISTER PUBLICATIONS SUBSCRIPTIONS § 11.2 Federal Register. (a) The subscription price for the paper edition of the...

1 CFR 11.2 - Federal Register.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Federal Register. 11.2 Section 11.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER AVAILABILITY OF OFFICE OF THE FEDERAL REGISTER PUBLICATIONS SUBSCRIPTIONS § 11.2 Federal Register. (a) The subscription price for the paper edition of the...

1 CFR 11.2 - Federal Register.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Federal Register. 11.2 Section 11.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER AVAILABILITY OF OFFICE OF THE FEDERAL REGISTER PUBLICATIONS SUBSCRIPTIONS § 11.2 Federal Register. (a) The subscription price for the paper edition of the...

Optimizing Instruction Scheduling and Register Allocation for Register-File-Connected Clustered VLIW Architectures

PubMed Central

Tang, Haijing; Wang, Siye; Zhang, Yanjun

2013-01-01

Clustering has become a common trend in very long instruction words (VLIW) architecture to solve the problem of area, energy consumption, and design complexity. Register-file-connected clustered (RFCC) VLIW architecture uses the mechanism of global register file to accomplish the inter-cluster data communications, thus eliminating the performance and energy consumption penalty caused by explicit inter-cluster data move operations in traditional bus-connected clustered (BCC) VLIW architecture. However, the limit number of access ports to the global register file has become an issue which must be well addressed; otherwise the performance and energy consumption would be harmed. In this paper, we presented compiler optimization techniques for an RFCC VLIW architecture called Lily, which is designed for encryption systems. These techniques aim at optimizing performance and energy consumption for Lily architecture, through appropriate manipulation of the code generation process to maintain a better management of the accesses to the global register file. All the techniques have been implemented and evaluated. The result shows that our techniques can significantly reduce the penalty of performance and energy consumption due to access port limitation of global register file. PMID:23970841

The SCARLET{trademark} array for high power GEO satellites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spence, B.R.; Jones, P.A.; Eskenazi, M.I.

1997-12-31

The GEO satellite market is demanding increasingly capable spacecraft which, in turn, drives commercial spacecraft manufacturers to require significantly higher power solar arrays. As satellite capability increases the demand for high power array systems which are both cost and performance competitive becomes more crucial. Conventional rigid panel planar arrays, although suitable in the past, negatively impact spacecraft competitiveness for these new applications. The Solar Concentrator Array with Refractive Linear Element Technology (SCARLET{trademark}) represents an economically attractive solution for meeting these new high power requirements. When compared to conventional planar arrays, SCARLET provides substantially lower cost and higher deployed stiffness, competitivemore » mass, better producibility, and affordable use of high efficiency multijunction cells. This paper compares cost/performance characteristics of the SCARLET array to conventional planar arrays for high power GEO spacecraft applications. High power SCARLET array configurations are described, and inherent spacecraft and array level cost/performance benefits are presented.« less

SOXAL{trademark} pilot plant demonstration at Niagara Mohawk`s Dunkirk Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strangway, P.K.

This paper describes a six-month, nominal three megawatt (3 MW) pilot plant demonstration of the SOXAL{trademark} regenerative flue gas desulfurization (FGD) process at Niagara Mohawk Power Corporation`s Dunkirk, NY coal-fired power station. Using a slip-stream of flue gas from an actual coal-fired boiler, the pilot plant successfully demonstrated the absorption of sulfur dioxide and the simultaneous regeneration of sodium-based scrubbing liquor via bipolar membrane electrodialysis. Sulfur dioxide removal efficiency of greater than 98% was routinely achieved. The absorption and regeneration stages were both proven reliable and controllable. The pilot plant was successfully operated in both continuous and decoupled modes ofmore » operation, thus demonstrating the flexibility of this process.« less

An open-access, mobile compatible, electronic patient register for rheumatic heart disease ('eRegister') based on the World Heart Federation's framework for patient registers.

PubMed

van Dam, Joris; Musuku, John; Zühlke, Liesl J; Engel, Mark E; Nestle, Nick; Tadmor, Brigitta; Spector, Jonathan; Mayosi, Bongani M

2015-01-01

Rheumatic heart disease (RHD) remains a major disease burden in low-resource settings globally. Patient registers have long been recognised to be an essential instrument in RHD control and elimination programmes, yet to date rely heavily on paper-based data collection and non-networked data-management systems, which limit their functionality. To assess the feasibility and potential benefits of producing an electronic RHD patient register. We developed an eRegister based on the World Heart Federation's framework for RHD patient registers using CommCare, an open-source, cloud-based software for health programmes that supports the development of customised data capture using mobile devices. The resulting eRegistry application allows for simultaneous data collection and entry by field workers using mobile devices, and by providers using computer terminals in clinics and hospitals. Data are extracted from CommCare and are securely uploaded into a cloud-based database that matches the criteria established by the WHF framework. The application can easily be tailored to local needs by modifying existing variables or adding new ones. Compared with traditional paper-based data-collection systems, the eRegister reduces the risk of data error, synchronises in real-time, improves clinical operations and supports management of field team operations. The user-friendly eRegister is a low-cost, mobile, compatible platform for RHD treatment and prevention programmes based on materials sanctioned by the World Heart Federation. Readily adaptable to local needs, this paperless RHD patient register program presents many practical benefits.

Progress Report for the Robotic Intelligence Evaluation. Program Year 1: Developing Test Methodology for Anti-Rollover Systems

DTIC Science & Technology

2006-06-01

Scientific Research. 5PAM-Crash is a trademark of the ESI Group . 6MATLAB and SIMULINK are registered trademarks of the MathWorks. 14 maneuvers...Laboratory (ARL) to develop methodologies to evaluate robotic behavior algorithms that control the actions of individual robots or groups of robots...methodologies to evaluate robotic behavior algorithms that control the actions of individual robots or groups of robots acting as a team to perform a

FAST Mast Structural Response to Axial Loading: Modeling and Verification

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Elliott, Kenny B.; Templeton, Justin D.; Song, Kyongchan; Rayburn, Jeffery T.

2012-01-01

The International Space Station s solar array wing mast shadowing problem is the focus of this paper. A building-block approach to modeling and analysis is pursued for the primary structural components of the solar array wing mast structure. Starting with an ANSYS (Registered Trademark) finite element model, a verified MSC.Nastran (Trademark) model is established for a single longeron. This finite element model translation requires the conversion of several modeling and analysis features for the two structural analysis tools to produce comparable results for the single-longeron configuration. The model is then reconciled using test data. The resulting MSC.Nastran (Trademark) model is then extended to a single-bay configuration and verified using single-bay test data. Conversion of the MSC. Nastran (Trademark) single-bay model to Abaqus (Trademark) is also performed to simulate the elastic-plastic longeron buckling response of the single bay prior to folding.

Registers in Infant Phonation.

PubMed

Buder, Eugene H; McDaniel, Valerie F; Bene, Edina R; Ladmirault, Jennifer; Oller, D Kimbrough

2018-04-09

The primary vocal registers of modal, falsetto, and fry have been studied in adults but not per se in infancy. The vocal ligament is thought to play a critical role in the modal-falsetto contrast but is still developing during infancy (Tateya and Tateya, 2015). 41 Cover tissues are also implicated in the modal-fry contrast, but the low fundamental frequency (f o ) cutoff of 70 Hz, shared between genders, suggests a psychoacoustic basis for the contrast. Buder, Chorna, Oller, and Robinson (2008) 6 used the labels of "loft," "modal," and "pulse" for distinct vibratory regimes that appear to be identifiable based on spectrographic inspection of harmonic structure and auditory judgments in infants, but this work did not supply acoustic measurements to verify which of these nominally labeled regimes resembled adult registers. In this report, we identify clear transitions between registers within infant vocalizations and measure these registers and their transitions for f o and relative harmonic amplitudes (H1-H2). By selectively sampling first-year vocalizations, this manuscript quantifies acoustic patterns that correspond to vocal fold vibration types not previously cataloged in infancy. Results support a developmental basis for vocal registers, revealing that a well-developed ligament is not needed for loft-modal quality shifts as seen in harmonic amplitude measures. Results also reveal that a distinctively pulsatile register can occur in infants at a much higher f o than expected on psychoacoustic grounds. Overall results are consistent with cover tissues in infancy that are, for vibratory purposes, highly compliant and readily detached. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

The Inventive Thinking Curriculum Project. An Outreach Program of the United States Patent and Trademark Office. Third Edition.

ERIC Educational Resources Information Center

Department of Commerce, Washington, DC.

The Inventive Thinking Curriculum Project is one of the many projects included in the national outreach program of the U.S. Patent and Trademark Office. It is designed to be used in conjunction with a thinking skills program as a means of applying critical and creative thinking and problem-solving skills through the activity of creating an…

Sparky's Firehouse (Games)

MedlinePlus

Parents Educators MENU Home Videos Games & Apps Activities Sparky Firetrucks Parents Educators Firetrucks Videos Games Sparky Apps Activities The name and image of Sparky are registered trademarks ...

Registered Nurse (Associate Degree).

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of registered nurse (with an associate degree), lists technical competencies and competency builders for 19 units pertinent to the health technologies cluster in general and 5 units specific to the occupation of registered nurse. The following…

Well-informed by national registers? A comparison of national ART registers in Germany, France and the United Kingdom.

PubMed

Kadi, Selma; Wiesing, Urban

2017-12-01

National registers which document assisted reproductive technology (ART) treatments are important for a range of stakeholders. Their websites and reports are a source of information for ART practitioners, (future) patients and the public. The aim of our study was to compare national ART registers in the three European countries with the largest populations and evaluate whether ART registers currently meet the information needs of the different groups. We compared the publications of national registers in three European countries (the United Kingdom, France and Germany) with diverse regulatory approaches. Our analysis focused on two criteria: data quality and patient orientation. Our findings suggest that the German and French registers' publications fulfil the criteria to a lesser degree than the British register publications, by collecting data that are likely to be less accurate and publishing less information specifically targeted at patients. Differences in the publications and the data collection methods of the three registers impact the opportunities of various stakeholders to access information about ART from their respective national registers.

Evaluation of the in vivo genotoxic potential of three carcinogenic aromatic amines using the Big Blue{trademark} transgenic mouse mutation assay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suter, W.; Ahiabor, R.; Blanco, B.

Three genotoxic mouse carcinogens, 4-chloro-o-phenylenediamine (4-C-o-PDA), 2-nitro-p-phenylenediamine (2-N-p-PDA), and 2,4-diaminotoluene (2,4-DAT), were tested in the Big Blue{trademark} transgenic mouse mutation assay. Each experiment consisted of a vehicle control group with ten Big Blue{trademark} C57BL/6 mice, five of either sex, and an equally sized group treated with a high dose of the test chemical. In addition, four animals were treated with the vehicle and six animals with the test compound for the measurement of bromodeoxyuridine (BrdU) incorporation to determine cellular proliferation. The doses used in the main study were 200 mg/kg/day for 4-C-o-PDA, 150 mg/kg/day for 2-N-p-PDA, and 80 mg/kg/day formore » 2,4-DAT. There was no increase in BrdU incorporation immediately after treatment with 4-C-o-PDA or with 2,4-DAT. However, 10 days after the last treatment with 2,4-DAT, a strong mitogenic effect was found with both techniques. 4-C-o-PDA, a liver carcinogen in both genders of mice, induced a small, statistically significant increase of the mutant frequencies in females, none in males. 2-N-p-PDA was found positive in males and was clearly negative in females. 2,4-DAT, a liver carcinogen in female mice, was positive in females and negative in males when the animals were killed 10 days after the last treatment. After an expression time of 28 days, 2,4-DAT induced a statistically significant increase in both sexes. The effect in females was marginally stronger than after 10 days` expression time and almost identical to the effect observed in makes under these test conditions. In conclusion, the experiments showed that the Big Blue{trademark} assay detects the genotoxicity of the three carcinogenic monocyclic aromatic amines tested. However, it seems that the sex specificity of the carcinogenic effects of these compounds is not reflected by the mutagenicity data in Big Blue{trademark} mice. 39 refs., 6 tabs.« less

The changing well-being of older adult registered Indians: an analysis using the Registered Indian Human Development Index.

PubMed

Cooke, Martin; Guimond, Eric; McWhirter, Jennifer

2008-01-01

The demographic aging of the Registered Indian population suggests that the social, economic, and health conditions of older Registered Indians will be increasingly important for communities and policymakers. We have adapted the United Nations Development Program's Human Development Index using data from the Census of Canada and the Indian Register to measure whether improvements seen in the knowledge, standard of living, and health of the Registered Indian population between 1981 and 2001 are also observed among Registered Indians of older ages. The absolute levels of well-being of older Registered Indians were found to have improved, but gaps with other older Canadians had widened, particularly in terms of income and male life expectancy.

What If? Conditionals in Educational Registers

ERIC Educational Resources Information Center

Louwerse, Max M.; Crossley, Scott A.; Jeuniaux, Patrick

2008-01-01

Many corpus linguistic studies have investigated classification of texts into genres and registers, but relatively few of these studies have looked at linguistic features in educational registers. From a pedagogical perspective it is important to determine whether certain linguistic features behave differently across registers within particular…

The National Register of Historic Places.

ERIC Educational Resources Information Center

Greenberg, Ronald M., Ed

2002-01-01

This journal contains articles and materials to help teachers instruct students about U.S. historical and cultural heritage. Articles and materials are: "The National Register of Historic Places Today" (C. D. Shull); "The (Economic) Value of National Register Listing" (D. D. Rypkema); "The National Register and Heritage…

20 CFR 346.1 - Central register.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Central register. 346.1 Section 346.1 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD UNEMPLOYMENT INSURANCE ACT RAILROAD HIRING § 346.1 Central register. (a) The Board shall maintain a central register of railroad...

20 CFR 346.1 - Central register.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Central register. 346.1 Section 346.1 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD UNEMPLOYMENT INSURANCE ACT RAILROAD HIRING § 346.1 Central register. (a) The Board shall maintain a central register of railroad...

20 CFR 346.1 - Central register.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Central register. 346.1 Section 346.1 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD UNEMPLOYMENT INSURANCE ACT RAILROAD HIRING § 346.1 Central register. (a) The Board shall maintain a central register of railroad...

20 CFR 346.1 - Central register.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Central register. 346.1 Section 346.1 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD UNEMPLOYMENT INSURANCE ACT RAILROAD HIRING § 346.1 Central register. (a) The Board shall maintain a central register of railroad...

Sensitivity to linguistic register in 20-month-olds: Understanding the register-listener relationship and its abstract rules

PubMed Central

Kobayashi, Tessei; Itakura, Shoji

2018-01-01

Linguistic register reflects changes in speech that depend on the situation, especially the status of listeners and listener-speaker relationships. Following the sociolinguistic rules of register is essential in establishing and maintaining social interactions. Recent research suggests that children over 3 years of age can understand appropriate register-listener relationships as well as the fact that people change register depending on their listeners. However, given previous findings that infants under 2 years of age have already formed both social and speech categories, it may be possible that even younger children can also understand appropriate register-listener relationships. The present study used Infant-Directed Speech (IDS) and formal Adult-Directed Speech (ADS) to examine whether 20-month-old toddlers can understand register-listener relationships. In Experiment 1, we used a violation-of-expectation method to examine whether 20-month-olds understand the individual associations between linguistic registers and listeners. Results showed that the toddlers looked significantly longer at a scene in which the adult was talked to in IDS than when the infant was talked to in IDS. In contrast, there was no difference when the adult and the infant were talked to in formal ADS. In Experiments 2 and 3, we used a habituation switch paradigm to examine whether 20-month-olds understand the abstract rule that a change of register depends on listeners rather than on speakers. Results showed that the toddlers looked significantly longer at the scene where the register rule was violated. The present findings provide new evidence that even 20-month-olds already understand that people change their way of speaking based on listeners, although their understanding of individual register-listener relationships is immature. PMID:29630608

1 CFR 11.7 - Federal Register Index.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Federal Register Index. 11.7 Section 11.7... REGISTER PUBLICATIONS SUBSCRIPTIONS § 11.7 Federal Register Index. The annual subscription price for the monthly Federal Register Index, purchased separately, in paper form, is $29. The price excludes postage...

Universal Verification Methodology Based Register Test Automation Flow.

PubMed

Woo, Jae Hun; Cho, Yong Kwan; Park, Sun Kyu

2016-05-01

In today's SoC design, the number of registers has been increased along with complexity of hardware blocks. Register validation is a time-consuming and error-pron task. Therefore, we need an efficient way to perform verification with less effort in shorter time. In this work, we suggest register test automation flow based UVM (Universal Verification Methodology). UVM provides a standard methodology, called a register model, to facilitate stimulus generation and functional checking of registers. However, it is not easy for designers to create register models for their functional blocks or integrate models in test-bench environment because it requires knowledge of SystemVerilog and UVM libraries. For the creation of register models, many commercial tools support a register model generation from register specification described in IP-XACT, but it is time-consuming to describe register specification in IP-XACT format. For easy creation of register model, we propose spreadsheet-based register template which is translated to IP-XACT description, from which register models can be easily generated using commercial tools. On the other hand, we also automate all the steps involved integrating test-bench and generating test-cases, so that designers may use register model without detailed knowledge of UVM or SystemVerilog. This automation flow involves generating and connecting test-bench components (e.g., driver, checker, bus adaptor, etc.) and writing test sequence for each type of register test-case. With the proposed flow, designers can save considerable amount of time to verify functionality of registers.

Development of the CROW{trademark} process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, L.A. Jr.

1994-05-01

The Contained Recovery of Oily Waste (CROW{trademark}) technology has been successfully tested in the laboratory and presently is being implemented at field sites contaminated with wood treating wastes and byproducts of town gas production. These field demonstrations will utilize only hot-water displacement without any chemical additives because the use of chemicals to enhance the hot-water flushing process has only been tested on a preliminary basis. Preliminary testing has shown that low concentrations of chemicals could reduce the contaminant content by an additional 10 to 20 wt %. Western Research Institute (WRI) research, plus research at Carnegie Mellon University, on surfactantmore » enhancement of solubility of polynuclear aromatic hydrocarbons in water and water-soil systems indicate the potential of chemical enhancement of the CROW process. Chemicals that have been tested and that were used in these tests are totally biodegradable. The objective of this task was to obtain sufficient baseline data to show the effectiveness and environmentally safe use of chemicals, primarily surfactants, to enhance the CROW process. To meet this objective, 14 one-dimensional displacement tests were conducted. Eleven tests were conducted on a material from a former manufactured gas plant (MGP) site and four tests were conducted with a contaminated soil from a former wood treatment facility. The tests investigated the effect of three chemical concentrations (0, 0.5, and 1.0 vol %) at three temperatures (ambient, the projected optimum temperature, and one 40{degree}F [22{degree}C] below the optimum temperature).« less

Register of hydrogen technology experts

NASA Technical Reports Server (NTRS)

Ludtke, P. R.

1975-01-01

This register presents the names of approximately 235 individuals who are considered experts, or very knowledgeable, in various fields of technology related to hydrogen. Approximately 90 organizations are represented. Each person is listed by organizational affiliation, address, and principal area of expertise. The criteria for selection of names for the register are extensive experience in a given field of work, participation in or supervision of relevant research programs, contributions to the literature, or being recognized as an expert in a particular field. The purpose of the register is to present, in easy form, sources of dependable information regarding highly technical areas of hydrogen technology, with particular emphasis on safety. The register includes two indexes: an alphabetical listing of the experts and an alphabetical listing of the organizations with which they are affiliated.

Molecular Electronic Shift Registers

NASA Technical Reports Server (NTRS)

Beratan, David N.; Onuchic, Jose N.

1990-01-01

Molecular-scale shift registers eventually constructed as parts of high-density integrated memory circuits. In principle, variety of organic molecules makes possible large number of different configurations and modes of operation for such shift-register devices. Several classes of devices and implementations in some specific types of molecules proposed. All based on transfer of electrons or holes along chains of repeating molecular units.

EPA-Registered Bed Bug Products

MedlinePlus

... Bugs EPA Registered Bed Bug Products EPA-Registered Bed Bug Products Resources Bed Bug Main Page Top Ten ... Where you can use the pesticide Pesticide type Bed Bug Search Tool Enter the information as described in ...

1 CFR 12.1 - Federal Register.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Federal Register. 12.1 Section 12.1 General... PUBLICATIONS OFFICIAL DISTRIBUTION WITHIN FEDERAL GOVERNMENT § 12.1 Federal Register. (a) Copies of the daily Federal Register in paper or microfiche form shall be made available to the following without charge: (1...

1 CFR 12.1 - Federal Register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Federal Register. 12.1 Section 12.1 General... PUBLICATIONS OFFICIAL DISTRIBUTION WITHIN FEDERAL GOVERNMENT § 12.1 Federal Register. (a) Copies of the daily Federal Register in paper or microfiche form shall be made available to the following without charge: (1...

1 CFR 12.1 - Federal Register.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Federal Register. 12.1 Section 12.1 General... PUBLICATIONS OFFICIAL DISTRIBUTION WITHIN FEDERAL GOVERNMENT § 12.1 Federal Register. (a) Copies of the daily Federal Register in paper or microfiche form shall be made available to the following without charge: (1...

1 CFR 12.1 - Federal Register.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Federal Register. 12.1 Section 12.1 General... PUBLICATIONS OFFICIAL DISTRIBUTION WITHIN FEDERAL GOVERNMENT § 12.1 Federal Register. (a) Copies of the daily Federal Register in paper or microfiche form shall be made available to the following without charge: (1...

1 CFR 12.1 - Federal Register.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Federal Register. 12.1 Section 12.1 General... PUBLICATIONS OFFICIAL DISTRIBUTION WITHIN FEDERAL GOVERNMENT § 12.1 Federal Register. (a) Copies of the daily Federal Register in paper or microfiche form shall be made available to the following without charge: (1...

I Phone, You Phone, We All Phone with iPhone: Trademark Law and Ethics from an International and Domestic Perspective

ERIC Educational Resources Information Center

Cowart, Tammy W.; Chumney, Wade M.

2011-01-01

In today's Internet-based and global business environment, the legal issues companies face will often involve issues of intellectual property. Virtually every product people purchase is protected by a trademark, a patent, and/or copyrights. Thus, basic concepts of intellectual property are a natural component in any business law or legal…

Laser-Gyro Materials Studies

DTIC Science & Technology

1986-03-01

mean-square (rms) have been measured on fused quartz and Zerodur surfaces polished by manufacturers of ring- laser gyros. The measurements were made...Sizes and Percent Crystallinity of Laser Gyro Materials. Crystallite Crystallinity, Material size, :-100 A ±10 vol% Zerodur 800 79 Quartz 500 53...Based on t data presented in this rel ort, Cervit, Zerodur , and RLA 559,122 from Corning Glass Works have acceptable material properties for laser

X-Ray Performance of Multilayer Diffraction Diagnostics

DTIC Science & Technology

1989-11-13

wafers to fused quartz and superpolished Zerodur were used. Multilayers were deposited onto Si wafer substrates nd cleaved to rectangular sections 3.2...except it was noted that for depositions made on the supersmooth quartz and Zerodur substrates that the multilayer surfaces were slightly smoother than...values from the multilavers deposited on supersmooth quartz and Zerodur substrates were noticeabLe Lower than the U/Si multilav;ers on silicon

Elliptically Framed Tip-Tilt Mirror Optimized for Stellar Tracking

DTIC Science & Technology

2015-01-01

a rotating frame. We used the same materials as the existing tracker; however, light-weighted both the aluminum frame and Zerodur ® mirror . We...as the existing tracker; however, light-weighted both the aluminum frame and Zerodur mirror . We generated a computer-aided design model, converted it...components include an aluminum yoke and ring, glass Zerodur ®4 mirror , piezoelectric (PZT) actuators and stainless steel flexure pivot bearings5. Fig. 1

Xyce Parallel Electronic Simulator Reference Guide Version 6.6.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Aadithya, Karthik Venkatraman; Mei, Ting

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide [1] . The information herein is subject to change without notice. Copyright c 2002-2016 Sandia Corporation. All rights reserved. Acknowledgements The BSIM Group at the University ofmore » California, Berkeley developed the BSIM3, BSIM4, BSIM6, BSIM-CMG and BSIM-SOI models. The BSIM3 is Copyright c 1999, Regents of the University of California. The BSIM4 is Copyright c 2006, Regents of the University of California. The BSIM6 is Copyright c 2015, Regents of the University of California. The BSIM-CMG is Copyright c 2012 and 2016, Regents of the University of California. The BSIM-SOI is Copyright c 1990, Regents of the University of California. All rights reserved. The Mextram model has been developed by NXP Semiconductors until 2007, Delft University of Technology from 2007 to 2014, and Auburn University since April 2015. Copyrights c of Mextram are with Delft University of Technology, NXP Semiconductors and Auburn University. The MIT VS Model Research Group developed the MIT Virtual Source (MVS) model. Copyright c 2013 Massachusetts Institute of Technology (MIT). The EKV3 MOSFET model was developed by the EKV Team of the Electronics Laboratory-TUC of the Technical University of Crete. Trademarks Xyce TM Electronic Simulator and Xyce TM are trademarks of Sandia Corporation. Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and Tec

NASGRO(registered trademark): Fracture Mechanics and Fatigue Crack Growth Analysis Software

NASA Technical Reports Server (NTRS)

Forman, Royce; Shivakumar, V.; Mettu, Sambi; Beek, Joachim; Williams, Leonard; Yeh, Feng; McClung, Craig; Cardinal, Joe

2004-01-01

This viewgraph presentation describes NASGRO, which is a fracture mechanics and fatigue crack growth analysis software package that is used to reduce risk of fracture in Space Shuttles. The contents include: 1) Consequences of Fracture; 2) NASA Fracture Control Requirements; 3) NASGRO Reduces Risk; 4) NASGRO Use Inside NASA; 5) NASGRO Components: Crack Growth Module; 6) NASGRO Components:Material Property Module; 7) Typical NASGRO analysis: Crack growth or component life calculation; and 8) NASGRO Sample Application: Orbiter feedline flowliner crack analysis.

Direct Functionalization of Kevlar (registered trademark) with Copolymers Containing Sulfonyl Nitrene

DTIC Science & Technology

2016-01-01

phenylene terephthalamide) (Kevlar®) fibers via thermal generation of an electrophilic nitrene, while preserving the mechanical properties of the...poly(p-phenylene terephthalamide) (Kevlar®) fibers via thermal generation of an electrophilic nitrene, while preserving the mechanical properties of...radiation, plasma, or chemical radical generation,12 conventional solution-based electrophilic aromatic substitution,13 silanation,14 or hydrolysis with

Overcoming boundaries of worldwide joint arthroplasty registers: the European Arthroplasty Register minimal dataset.

PubMed

Sadoghi, Patrick; Leithner, Andreas; Labek, Gerold

2013-09-01

Worldwide joint arthroplasty registers are instrumental to screen for complications or implant failures. In order to achieve comparable results a similar classification dataset is essential. The authors therefore present the European Federation of National Associations of Orthopaedics and Traumatology (EFORT) European Arthroplasty Register (EAR) minimal dataset for primary and revision joint arthroplasty. Main parameters include the following: date of operation, country, hospital ID-code, patient's name and prename, birthday, identification code of the implant, gender, diagnosis, preoperations, type of prosthesis (partial, total), side, cementation technique, use of antibiotics in the cement, surgical approach, and others specifically related to the affected joint. The authors believe that using this minimal dataset will improve the chance for a worldwide comparison of arthroplasty registers and ask future countries for implementation. Copyright © 2013 Elsevier Inc. All rights reserved.

Unattended Multiplicity Shift Register

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newell, Matt; Jones, David C.

2017-01-16

The Unattended Multiplicity Shift Register (UMSR) is a specialized pulse counter used primarily to count neutron events originating in neutron detection instruments. While the counter can be used to count any TTL input pulses, its unique ability to record time correlated events and the multiplicity distributions of these events makes it an ideal instrument for counting neutron events in the nuclear fields of material safeguards, waste assay and process monitoring and control. The UMSR combines the Los Alamos National Laboratory (LANL) simple and robust shift register design with a Commercial-Off-The-Shelf (COTS) processor and Ethernet communications. The UMSR is fully compatiblemore » with existing International Atomic Energy Agency (IAEA) neutron data acquisition instruments such as the Advance Multiplicity Shift Register (AMSR) and JSR-15. The UMSR has three input channels: a multiplicity shift register input and two auxiliary inputs. The UMSR provides 0V to 2kV of programmable High Voltage (HV) bias and both a 12V and a 5V detector power supply output. A serial over USB communication line to the UMSR allows the use of existing versions of INCC or MIC software while the Ethernet port is compatible with the new IAEA RAINSTORM communication protocol.« less

In-memory interconnect protocol configuration registers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Kevin Y.; Roberts, David A.

Systems, apparatuses, and methods for moving the interconnect protocol configuration registers into the main memory space of a node. The region of memory used for storing the interconnect protocol configuration registers may also be made cacheable to reduce the latency of accesses to the interconnect protocol configuration registers. Interconnect protocol configuration registers which are used during a startup routine may be prefetched into the host's cache to make the startup routine more efficient. The interconnect protocol configuration registers for various interconnect protocols may include one or more of device capability tables, memory-side statistics (e.g., to support two-level memory data mappingmore » decisions), advanced memory and interconnect features such as repair resources and routing tables, prefetching hints, error correcting code (ECC) bits, lists of device capabilities, set and store base address, capability, device ID, status, configuration, capabilities, and other settings.« less

The Norwegian immunisation register--SYSVAK.

PubMed

Trogstad, L; Ung, G; Hagerup-Jenssen, M; Cappelen, I; Haugen, I L; Feiring, B

2012-04-19

The Norwegian immunisation register, SYSVAK, is a national electronic immunisation register. It became nationwide in 1995. The major aim was to register all vaccinations in the Childhood Immunisation Programme to ensure that all children are offered adequate vaccination according to schedule in the programme, and to secure high vaccination coverage. Notification to SYSVAK is mandatory, based on personal identification numbers. This allows follow up of individual vaccination schedules and linkage of SYSVAK data to other national health registers for information on outcome diagnoses, such as the surveillance system for communicable diseases. Information from SYSVAK is used to determine vaccine coverage in a timely manner. Coverage can be broken down to regional/local levels and used for active surveillance of vaccination coverage and decisions about interventions. During the 2009 influenza A(H1N1)pdm09 pandemic, an adaptation of SYSVAK enabled daily surveillance of vaccination coverage on national and regional levels. Currently, data from SYSVAK are used, among others, in studies on adverse events related to pandemic vaccination. Future challenges include maximising usage of collected data in surveillance and research, and continued improvement of data quality. Immunisation registers are rich sources for high quality surveillance of vaccination coverage, effectiveness, vaccine failure and adverse events, and gold mines for research.

Non-Academic Jobs for Fellows in Law Firms, Patent and Trademark Office and Scientific Intellectual Property | Center for Cancer Research

Cancer.gov

This workshop helps CCR fellows and staff scientists learn about and better position themselves for potential job opportunities at law firms, patent and trademark, and intellectual property protection across the biotechnology and pharmaceutical industries. Guest speakers will shed light on how to best position yourself for obtaining these types of positions and how to improve

ORAM-SENTINEL{trademark} demonstration at Fitzpatrick. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, L.K.; Anderson, V.M.; Mohammadi, K.

1998-06-01

New York Power Authority, in cooperation with EPRI, installed the ORAM-SENTINEL{trademark} software at James A. Fitzpatrick (JAF) Nuclear Power Plant. This software incorporates models of safety systems and support systems that are used for defense-in-depth in the plant during outage and on-line periods. A secondary goal was to include some pre-analyzed risk results to validate the methodology for quantitative assessment of the plant risks during proposed on-line maintenance. During the past year, New York Power Authority personnel have become familiar with the formal computerized Safety Assessment process associated with on-line and outage maintenance. The report describes techniques and lessons learnedmore » during development of the ORAM-SENTINEL model at JAF. It overviews the systems important to the Safety Function Assessment Process and provides details on development of the Plant Transient Assessment process using the station emergency operating procedures. The assessment results are displayed by color (green, yellow, orange, red) to show decreasing safety conditions. The report describes use of the JAF Probabilistic Safety Assessment within the ORAM-SENTINEL code to calculate an instantaneous core damage frequency and the criteria by which this frequency is translated to a color indicator.« less

User account | National Agricultural Library

Science.gov Websites

Skip to main content Home National Agricultural Library United States Department of Agriculture Ag registered trademark of Dries Buytaert. NAL Home | USDA.gov | Agricultural Research Service | Plain Language

Inventors and their attorneys must beware of their actions before the US Patent and Trademark Office.

PubMed

Warburg, Richard; Nguyen, Lauren

2004-04-01

Inventors and their legal representative have a duty to disclose all material information of which they are aware to the United States Patent and Trademark Office (USPTO). Breach of this duty, combined with an intent to deceive the USPTO, can result in a court finding of inequitable conduct. Consequently, a patent will be rendered unenforceable upon a court's determination of inequitable conduct. To help understand the requirements of the duty of disclosure, a discussion highlighting recent court decisions pertaining to the issue of inequitable conduct is presented.

Registering Researchers in Authority Files

ERIC Educational Resources Information Center

Smith-Yoshimura, Karen; Altman, Micah; Conlon, Michael; Cristán, Ana Lupe; Dawson, Laura; Dunham, Joanne; Hickey, Thom; Hook, Daniel; Horstmann, Wolfram; MacEwan, Andrew; Schreur, Philip; Smart, Laura; Wacker, Melanie; Woutersen, Saskia

2014-01-01

Written by OCLC Research Program Officer Karen Smith-Yoshimura and the 13 members of the Registering Researchers in Authority Files Task Group comprised of specialists from the US, UK, and the Netherlands, this report summarizes their research into approaches to providing authoritative researcher identifiers. Registering researchers in some type…

Village registers for vital registration in rural Malawi.

PubMed

Singogo, E; Kanike, E; van Lettow, M; Cataldo, F; Zachariah, R; Bissell, K; Harries, A D

2013-08-01

Paper-based village registers were introduced 5 years ago in Malawi as a tool to measure vital statistics of births and deaths at the population level. However, usage, completeness and accuracy of their content have never been formally evaluated. In Traditional Authority Mwambo, Zomba district, Malawi, we assessed 280 of the 325 village registers with respect to (i) characteristics of village headmen who used village registers, (ii) use and content of village registers, and (iii) whether village registers provided accurate information on births and deaths. All village headpersons used registers. There were 185 (66%) registers that were regarded as 95% completed, and according to the registers, there were 115 840 people living in the villages in the catchment area. In 2011, there were 1753 births recorded in village registers, while 6397 births were recorded in health centre registers in the same catchment area. For the same year, 199 deaths were recorded in village registers, giving crude death rates per 100 000 population of 189 for males and 153 for females. These could not be compared with death rates in health centre registers due to poor and inconsistent recording in these registers, but they were compared with death rates obtained from the 2010 Malawi Demographic Health Survey that reported 880 and 840 per 100 000 for males and females, respectively. In conclusion, this study shows that village registers are a potential source for vital statistics. However, considerable inputs are needed to improve accuracy of births and deaths, and there are no functional systems for the collation and analysis of data at the traditional authority level. Innovative ways to address these challenges are discussed, including the use of solar-powered electronic village registers and mobile phones, connected with each other and the health facilities and the District Commissioner's office through the cellular network and wireless coverage. © 2013 John Wiley & Sons Ltd.

Antigenic Protein In Microgravity-Grown Human Mixed Mullerian Tumor (LN1) Cells Preserved In RNA Stabilizing Agent

NASA Technical Reports Server (NTRS)

Hammond, Dianne K.; Becker, Jeanne; Elliott, T. F.; Holubec, K.; Baker, T. L.; Love, J. E.

2004-01-01

Cells treated with RNAlater(TradeMark) have previously been shown to contain antigenic proteins that can be visualized using Western blot analysis. These proteins seem to be stable for several months when stored in RNA stabilizer at 4 C. Antigenic protein can be recovered from cells that have been processed using an Ambion RNAqueous(Registered TradeMark) kit to remove RNA. In this set of experiments, human mixed Mullerian tumor (LNI) cells grown on the International Space Station during Expedition 3 were examined for antigenic stability after removal of RNA. The cells were stored for three months in RNAlater(TradeMark) and RNA was extracted. The RNA filtrate containing the protein was precipitated, washed, and suspended in buffer containing sodium dodecyl sulfate (SDS). Samples containing equal concentrations of protein were loaded onto SDS-polyacrylamide gels. Proteins were separated by electrophoresis and transferred by Western blot to polyvinylidene fluoride (PVDF) membrane. The Western blots were stained with an enhanced chemiluminescent ECL(Registered Trademark) Plus detection kit (Amersham) and scanned using a Storm 840 gel image analyzer (Amersham, Molecular Dynamics). ImageQuant(Registered TradeMark) software was used to quantify the densities of the protein bands. The ground control and flight LN1 cell samples showed a similar staining pattern over time with antibodies to vimentin, glyceraldehyde-3-phosphate dehydrogenase, and epithelial membrane antigens.

Denaturing high-performance liquid chromatography for mutation detection and genotyping.

PubMed

Fackenthal, Donna Lee; Chen, Pei Xian; Howe, Ted; Das, Soma

2013-01-01

Denaturing high-performance liquid chromatography (DHPLC) is an accurate and efficient screening technique used for detecting DNA sequence changes by heteroduplex analysis. It can also be used for genotyping of single nucleotide polymorphisms (SNPs). The high sensitivity of DHPLC has made this technique one of the most reliable approaches to mutation analysis and, therefore, used in various areas of genetics, both in the research and clinical arena. This chapter describes the methods used for mutation detection analysis and the genotyping of SNPs by DHPLC on the WAVE™ system from Transgenomic Inc. ("WAVE" and "DNASep" are registered trademarks, and "Navigator" is a trademark, of Transgenomic, used with permission. All other trademarks are property of the respective owners).

Changes in surface figure due to thermal hysteresis

NASA Astrophysics Data System (ADS)

Jacobs, S. F.; Johnston, S. C.; Sasian, J. M.; Watson, M.; Targove, J. D.

1987-01-01

Thermal cycling hysteresis affects surface figure in low-expansivity mirror substrates. Zerodur, ULE, and Cer-Vit 8-in.-diameter mirrors and dilatometer samples were thermally cycled at uniform rates of 6 K/hr and 60 K/hr, and somewhat faster for nonuniform heating. Figure distortions as large as lambda/10 were observed following nonuniform heating of standard Zerodur, which was the only material exhibiting thermal hysteresis. A new experimental Zerodur appears to be free of this problem.

Surface figure changes due to thermal cycling hysteresis.

PubMed

Jacobs, S F; Johnston, S C; Sasian, J M; Watson, M; Targove, J D; Bass, D

1987-10-15

How does thermal cycling hysteresis affect surface figure in low expansivity mirror substrates? Zerodur, ULE, and Cer-Vit 20.3-cm (8-in.) diam mirrors and dilatometer samples were thermally cycled at 6 and 60 K/h with uniform and nonuniform heating. Figure distortions as large as lambda/10 were observed only with nonuniform heating of standard Zerodur, which was the only material exhibiting thermal hysteresis. A new experimental Zerodur appears to be free of this problem.

37 CFR 11.5 - Register of attorneys and agents in patent matters; practice before the Office.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., preparing and prosecuting any patent application, consulting with or giving advice to a client in... in trademark matters includes, but is not limited to, consulting with or giving advice to a client in...

37 CFR 11.5 - Register of attorneys and agents in patent matters; practice before the Office.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., preparing and prosecuting any patent application, consulting with or giving advice to a client in... in trademark matters includes, but is not limited to, consulting with or giving advice to a client in...

40 CFR 172.6 - Labeling.

Code of Federal Regulations, 2010 CFR

2010-07-01

...”; (4) The name, brand, or trademark; (5) The name and address of the permittee, producer, or registrant... a registered pesticide, the Administrator may, at his discretion, permit a pesticide to be used...

National Agricultural Library | United States Department of Agriculture

Science.gov Websites

Skip to main content Home National Agricultural Library United States Department of Agriculture Ag Policy Drupal is a registered trademark of Dries Buytaert. NAL Home | USDA.gov | Agricultural Research

Prevention and Treatment of High Cholesterol (Hyperlipidemia)

MedlinePlus

... be easily adapted based on your cultural and food preferences. To be smarter about what you eat, you’ ... registered trademark. This site complies with the HONcode standard for trustworthy health information: verify here.

Assessment of NASA Dual Microstructure Heat Treatment Method Utilizing Ladis SuperCooler(trademark) Cooling Technology

NASA Technical Reports Server (NTRS)

Lemsky, Joe; Gayda, John (Technical Monitor)

2005-01-01

The intent of this investigation was to demonstrate the NASA DMHT method with a tailored Ladish SuperCool(Trademark) cooling method on a Rolls-Royce AE2100, stage 3 disk shape. One disk each of two alloys, LSHR and ME3, were successfully converted as shown by macrostructure. DMHT heating time selection and cooling rate was aided by finite element modeling analysis. Residual stresses were also predicted and reported. Detailed microstructural analysis was performed by NASA and included in this report. Mechanical property characterization, also planned by NASA, is incomplete at this time and not part of this report.

Dive and Discover : Expeditions to the Seafloor

Science.gov Websites

, simply sign up. Name: * required Email: * required Are you a teacher? Yes No Your email will not be is a registered trademark of Woods Hole Oceanographic Institution Woods Hole Oceanographic

78 FR 20179 - Changes to Representation of Others Before The United States Patent and Trademark Office

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

...The United States Patent and Trademark Office (Office or USPTO) is adopting the new USPTO Rules of Professional Conduct (USPTO Rules), which are based on the American Bar Association's (ABA) Model Rules of Professional Conduct (ABA Model Rules), which were published in 1983, substantially revised in 2003 and updated through 2012. The Office has also revised the existing procedural rules governing disciplinary investigations and proceedings. These changes will enable the Office to better protect the public while also providing practitioners with substantially uniform disciplinary rules across multiple jurisdictions.

10 CFR 76.37 - Federal Register notice.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Federal Register notice. 76.37 Section 76.37 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.37 Federal Register notice. The Director may, at his or her discretion, publish in the Federal Register: (a...

10 CFR 76.37 - Federal Register notice.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Federal Register notice. 76.37 Section 76.37 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.37 Federal Register notice. The Director may, at his or her discretion, publish in the Federal Register: (a...

10 CFR 76.37 - Federal Register notice.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Federal Register notice. 76.37 Section 76.37 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.37 Federal Register notice. The Director may, at his or her discretion, publish in the Federal Register: (a...

10 CFR 76.37 - Federal Register notice.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Federal Register notice. 76.37 Section 76.37 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.37 Federal Register notice. The Director may, at his or her discretion, publish in the Federal Register: (a...

10 CFR 76.37 - Federal Register notice.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Federal Register notice. 76.37 Section 76.37 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.37 Federal Register notice. The Director may, at his or her discretion, publish in the Federal Register: (a...

Interferometric Creep Testing.

DTIC Science & Technology

1985-03-01

33 3 FIGURES (Continued) 16. Temperature of Zerodur sample and apparent strain * as a function of time with PZT-modulated mirror (point b...moves vertically if all mirrors are at 45 deg. The lower beam path et remains constant if the prism moves up or down or if the Zerodur plate expands...using a 2-in. Zerodur test sample at room temperature and no load except that from the weight of the top steel mirror disk, equivalent to 0.5 psi

46 CFR 401.510 - Operation without Registered Pilots.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Operation without Registered Pilots. 401.510 Section 401... REGULATIONS Penalties; Operations Without Registered Pilots § 401.510 Operation without Registered Pilots. (a... Registered Pilot when the vessel or its cargo is in distress or jeopardy. (b) A vessel may be navigated in...

Plain packaging and indirect expropriation of trademark rights under BITs: does FCTC help to establish a right to regulate tobacco products?

PubMed

Lo, Chang-Fa

2012-12-01

Recently the giant tobacco company Philip Morris served its notice to launch an investor-to-state dispute settlement proceeding against the Australian Government for its introduction of plain packaging requirements on tobacco products. It is an important event in the field of intellectual property, investment and international health law. The fundamental questions involved are whether the restriction of trademark rights as a result of the plain packaging requirement is a compensable indirect expropriation under BITs or whether it falls within the scope of government's right to regulate and thus become not compensable. This paper is of the view that the requirement of plain packaging will deprive the essential value or core function of trademark rights and thus constitutes an indirect expropriation under BITs. However, such indirect expropriation meets the public interest requirement and the necessity requirement. The paper further argues that sovereign States have an inherent right to regulate domestic economic activities. Since the pain packaging requirements provided in the FCTC Guidelines are expected to protect the value of human lives and health, the protected values clearly outweigh the affected commercial interests of tobacco companies. Also the justification for host States to adopt a plain packaging policy is strong. Thus, the interpreters of BITs need to pay higher respect to the host State's sovereign power concerning its right to regulate tobacco products for a legitimate purpose. The conclusion of the paper is that the host States should enjoy a defense of the right to regulate to refuse compensation. The author believes that this is the only reasonable conclusion to avoid possible conflicts between different treaty systems (BITs and the FCTC) and between different legal systems and fields (trademark law, investment law and international health law).

16 CFR 301.26 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 301.26... numbers. (a) Registered numbers for use as the required identification in lieu of the name on fur product... (d) of this section. (b)(1) Registered identification numbers shall be used only by the person or...

16 CFR 303.20 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 303.20... identification numbers. (a) Registered numbers for use as the required identification in lieu of the name on... the form set out in paragraph (d) of this section. (b)(1) Registered identification numbers shall be...

Commercial-scale demonstration of the Liquid Phase Methanol (LPMEOH{trademark}) process. Technical progress report number 9, July 1--September 30, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Liquid Phase Methanol (LPMEOH{trademark}) Demonstration Project at Kingsport, Tennessee, is a $213.7 million cooperative agreement between the US Department of Energy (DOE) and Air Products Liquid Phase Conversion Company, L.P. (the Partnership). The LPMEOH{trademark} Process Demonstration Unit is being built at a site located at the Eastman Chemical Company (Eastman) complex in Kingsport. The project involves the construction of an 80,000 gallons per day (260 tons per day (TPD)) methanol unit utilizing coal-derived synthesis gas from Eastman`s integrated coal gasification facility. The new equipment consists of synthesis gas feed preparation and compression facilities, the liquid phase reactor and auxiliaries,more » product distillation facilities, and utilities. This liquid phase process suspends fine catalyst particles in an inert liquid, forming a slurry. The slurry dissipates the heat of the chemical reaction away from the catalyst surface, protecting the catalyst and allowing the methanol synthesis reaction to proceed at higher rates. At the Eastman complex, the technology is being integrated with existing coal-gasifiers.« less

Dimensional stability tests over time and temperature for several low-expansion glass ceramics.

PubMed

Hall, D B

1996-04-01

The dimensional stabilities of five commercially available low-expansion glass ceramics have been measured between -40 °C and +90 °C. Materials tested include Zerodur, Zerodur M, Astrositall, Clearceram 55, and Clearceram 63. With the use of a standardized thermal testing procedure, the thermal expansion, isothermal shrinkage, and hysteresis behavior of the various materials are compared with one another. A detailed comparison of three separate melts of Astrositall, two separate melts of Zerodur, and one melt of Zerodur M indicates that between -40 °C and +90 °C the dimensional stability and uniformity characteristics of two of the melts of Astrositall are somewhat better than those of the other two materials. To my knowledge, this is the first published comparison of data from these glass ceramics taken with identical test procedures.

Increasing Rates of Brain Tumours in the Swedish National Inpatient Register and the Causes of Death Register

PubMed Central

Hardell, Lennart; Carlberg, Michael

2015-01-01

Radiofrequency emissions in the frequency range 30 kHz–300 GHz were evaluated to be Group 2B, i.e., “possibly”, carcinogenic to humans by the International Agency for Research on Cancer (IARC) at WHO in May 2011. The Swedish Cancer Register has not shown increasing incidence of brain tumours in recent years and has been used to dismiss epidemiological evidence on a risk. In this study we used the Swedish National Inpatient Register (IPR) and Causes of Death Register (CDR) to further study the incidence comparing with the Cancer Register data for the time period 1998–2013 using joinpoint regression analysis. In the IPR we found a joinpoint in 2007 with Annual Percentage Change (APC) +4.25%, 95% CI +1.98, +6.57% during 2007–2013 for tumours of unknown type in the brain or CNS. In the CDR joinpoint regression found one joinpoint in 2008 with APC during 2008–2013 +22.60%, 95% CI +9.68, +37.03%. These tumour diagnoses would be based on clinical examination, mainly CT and/or MRI, but without histopathology or cytology. No statistically significant increasing incidence was found in the Swedish Cancer Register during these years. We postulate that a large part of brain tumours of unknown type are never reported to the Cancer Register. Furthermore, the frequency of diagnosis based on autopsy has declined substantially due to a general decline of autopsies in Sweden adding further to missing cases. We conclude that the Swedish Cancer Register is not reliable to be used to dismiss results in epidemiological studies on the use of wireless phones and brain tumour risk. PMID:25854296

Increasing rates of brain tumours in the Swedish national inpatient register and the causes of death register.

PubMed

Hardell, Lennart; Carlberg, Michael

2015-04-03

Radiofrequency emissions in the frequency range 30 kHz-300 GHz were evaluated to be Group 2B, i.e., "possibly", carcinogenic to humans by the International Agency for Research on Cancer (IARC) at WHO in May 2011. The Swedish Cancer Register has not shown increasing incidence of brain tumours in recent years and has been used to dismiss epidemiological evidence on a risk. In this study we used the Swedish National Inpatient Register (IPR) and Causes of Death Register (CDR) to further study the incidence comparing with the Cancer Register data for the time period 1998-2013 using joinpoint regression analysis. In the IPR we found a joinpoint in 2007 with Annual Percentage Change (APC) +4.25%, 95% CI +1.98, +6.57% during 2007-2013 for tumours of unknown type in the brain or CNS. In the CDR joinpoint regression found one joinpoint in 2008 with APC during 2008-2013 +22.60%, 95% CI +9.68, +37.03%. These tumour diagnoses would be based on clinical examination, mainly CT and/or MRI, but without histopathology or cytology. No statistically significant increasing incidence was found in the Swedish Cancer Register during these years. We postulate that a large part of brain tumours of unknown type are never reported to the Cancer Register. Furthermore, the frequency of diagnosis based on autopsy has declined substantially due to a general decline of autopsies in Sweden adding further to missing cases. We conclude that the Swedish Cancer Register is not reliable to be used to dismiss results in epidemiological studies on the use of wireless phones and brain tumour risk.

SOXAL{trademark} pilot plant demonstration at Niagara Mohawk`s Dunkirk Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strangway, P.K.

The Clean Air Act Amendments of 1990 made it necessary to accelerate the development of scrubber systems for use by some utilities burning sulfur-containing fuels, primarily coal. While many types of Flue Gas Desulfurization (FGD) systems operate based on lime and limestone scrubbing, these systems have drawbacks when considered for incorporation into long-term emissions control plans. Although the costs associated with disposal of large amounts of scrubber sludge may be manageable today, the trend is toward increased disposal costs. Many new SO{sub 2} control technologies are being pursued in the hope of developing an economical regenerable FGD system did recoversmore » the SO{sub 2} as a saleable commercial product, thus minimizing the formation of disposal waste. Some new technologies include the use of exotic chemical absorbents which are alien to the utility industry and utilities` waste treatment facilities. These systems present utilities with new environmental issues. The SOXAL{trademark} process has been developed so as to eliminate such issues.« less

IDENTIFICATION AND CHARACTERIZATION OF INFECTIOUS AND NON-INFECTIOUS SUB-POPULATIONS OF ENCEPHALITIZOON INTESTINALIS SPORES PURIFIED FROM IN VITRO CELL CULTURE

EPA Science Inventory

Background: Encephalitizoon intestinalis spores were propagated in rabbit kidney (RK-13) cells and were purified using density gradient (Percoll [registered trademark]) centrifugation. Purified spores were enumeraged and aliquotted using flow cytometry with cell sorting for use...

Technology Evaluation Report - SITE PROGRAM DEMONSTRATION OF THE ULTROX INTERNATIONAL ULTRAVIOLET RADIATION OXIDATION TECHNOLOGY

EPA Science Inventory

In support of EPA's Superfund Innovative Technology Evaluation (SITE) Program, this report presents the results of the Ultrox International technology demonstration. The Ultrox® technology (a registered trademark of Ultrox International) simultaneously uses ultraviolet (UV) radi...

Xyce Parallel Electronic Simulator Users Guide Version 6.2.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Mei, Ting; Russo, Thomas V.

registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks of Amtec Engineering, Inc. Xyce 's expression library is based on that inside Spice 3F5 developed by the EECS Department at the University of California. The EKV3 MOSFET model was developed by the EKV Team of the Electronics Laboratory-TUC of the Technical University of Crete. All other trademarks are property of their respective owners. Contacts Bug Reports (Sandia only) http://joseki.sandia.gov/bugzilla http://charleston.sandia.gov/bugzilla World Wide Web http://xyce.sandia.gov http://charleston.sandia.gov/xyce (Sandia only) Email xyce@sandia.gov (outside Sandia) xyce-sandia@sandia.gov (Sandia only)« less

Xyce Parallel Electronic Simulator Users Guide Version 6.4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Mei, Ting; Russo, Thomas V.

registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks of Amtec Engineering, Inc. Xyce 's expression library is based on that inside Spice 3F5 developed by the EECS Department at the University of California. The EKV3 MOSFET model was developed by the EKV Team of the Electronics Laboratory-TUC of the Technical University of Crete. All other trademarks are property of their respective owners. Contacts Bug Reports (Sandia only) http://joseki.sandia.gov/bugzilla http://charleston.sandia.gov/bugzilla World Wide Web http://xyce.sandia.gov http://charleston.sandia.gov/xyce (Sandia only) Email xyce@sandia.gov (outside Sandia) xyce-sandia@sandia.gov (Sandia only)« less

Registered Nurses' views on their professional role.

PubMed

Furåker, Carina

2008-11-01

The aim is to study Registered Nurses' opinions and reflections about their work tasks, competence and organization in acute hospital care. The definition of the role of nurses has changed over time and it is often discussed whether Registered Nurses have a professional status or not. A qualitative research design was used. Data were derived from written reflections on diaries and from focus group interviews. All respondents had difficulties in identifying the essence of their work. It can be argued that being 'a spider in the web' is an important aspect of the nursing profession. Registered Nurses tend to regard their professional role as vague. Managers must be considered key persons in defining the professional role of Registered Nurses. This study contributes to an understanding of the managers' and the importance of nursing education in Registered Nurses professional development.

Selective data segment monitoring system. [using shift registers

NASA Technical Reports Server (NTRS)

Wirth, M. N. (Inventor)

1976-01-01

High speed data monitoring apparatus is described for displaying the bit pattern of a selected portion of a block of transmitted data comprising a shift register for receiving the transmitted data and for temporarily containing the consecutive data bits. A programmable sync detector for monitoring the contents of the shift register and for generating a sync signal when the shift register contains a predetermined sync code is included. A counter is described for counting the data bits input to the shift register after the sync signal is generated and for generating a count complete signal when a selected number of data bits have been input to the register. A data storage device is used for storing the contents of the shift register at the time the count complete signal is generated.

37 CFR 2.154 - Publication in Official Gazette.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.154 Publication in Official Gazette. A notice of the claim of benefits under the Act of 1946 and a...

37 CFR 2.153 - Publication requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... which said mark is in use in commerce, and stating that the owner claims the benefits of the Act of 1946..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act...

CPICOR{trademark}: Clean power from integrated coal-ore reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wintrell, R.; Miller, R.N.; Harbison, E.J.

1997-12-31

The US steel industry, in order to maintain its basic iron production, is thus moving to lower coke requirements and to the cokeless or direct production of iron. The US Department of Energy (DOE), in its Clean Coal Technology programs, has encouraged the move to new coal-based technology. The steel industry, in its search for alternative direct iron processes, has been limited to a single process, COREX{reg_sign}. The COREX{reg_sign} process, though offering commercial and environmental acceptance, produces a copious volume of offgas which must be effectively utilized to ensure an economical process. This volume, which normally exceeds the internal needsmore » of a single steel company, offers a highly acceptable fuel for power generation. The utility companies seeking to offset future natural gas cost increases are interested in this clean fuel. The COREX{reg_sign} smelting process, when integrated with a combined cycle power generation facility (CCPG) and a cryogenic air separation unit (ASU), is an outstanding example of a new generation of environmentally compatible and highly energy efficient Clean Coal Technologies. This combination of highly integrated electric power and hot metal coproduction, has been designated CPICOR{trademark}, Clean Power from Integrated Coal/Ore Reduction.« less

TECHNOLOGICAL INFORMATION REGARDING PREBIOTICS AND PROBIOTICS NUTRITION VERSUS THE PATENT REGISTERS: WHAT IS NEW?

PubMed Central

dos REIS, José Maciel Caldas; PINHEIRO, Maurício Fortuna; OTI, André Takashi; FEITOSA-JUNIOR, Denilson José Silva; PANTOJA, Mauro de Souza; BARROS, Rui Sérgio Monteiro

2016-01-01

ABSTRACT Introduction: Food is a key factor both in prevention and in promoting human health. Among the functional food are highlighted probiotics and prebiotics. Patent databases are the main source of technological information about innovation worldwide, providing extensive library for research sector. Objective: Perform mapping in the main patent databases about pre and probiotics, seeking relevant information regarding the use of biotechnology, nanotechnology and genetic engineering in the production of these foods. Method: Electronic consultation was conducted (online) in the main public databases of patents in Brazil (INPI), United States (USPTO) and the European Patent Bank (EPO). The research involved the period from January 2014 to July 2015, being used in the title fields and summary of patents, the following descriptors in INPI "prebiotic", "prebiotic" "probiotics", "probiotic" and the USPTO and EPO: "prebiotic", "prebiotics", "probiotic", "probiotics". Results: This search haven't found any deposit at the brazilian patents website (INPI) in this period; US Patent &Trademark Office had registered 60 titles in patents and the European Patent Office (EPO) showed 10 documents on the issue. Conclusion: Information technology offered by genetic engineering, biotechnology and nanotechnology deposited in the form of titles and abstracts of patents in relation to early nutritional intervention as functional foods, has increasingly required to decrease the risks and control the progression of health problems. But, the existing summaries, although attractive and promising in this sense, are still incipient to recommend them safely as a therapeutic tool. Therefore, they should be seen more as diet elements and healthy lifestyles. PMID:28076487

In Search of a Time Efficient Approach to Crack and Delamination Growth Predictions in Composites

NASA Technical Reports Server (NTRS)

Krueger, Ronald; Carvalho, Nelson

2016-01-01

Analysis benchmarking was used to assess the accuracy and time efficiency of algorithms suitable for automated delamination growth analysis. First, the Floating Node Method (FNM) was introduced and its combination with a simple exponential growth law (Paris Law) and Virtual Crack Closure technique (VCCT) was discussed. Implementation of the method into a user element (UEL) in Abaqus/Standard(Registered TradeMark) was also presented. For the assessment of growth prediction capabilities, an existing benchmark case based on the Double Cantilever Beam (DCB) specimen was briefly summarized. Additionally, the development of new benchmark cases based on the Mixed-Mode Bending (MMB) specimen to assess the growth prediction capabilities under mixed-mode I/II conditions was discussed in detail. A comparison was presented, in which the benchmark cases were used to assess the existing low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) in comparison to the FNM-VCCT fatigue growth analysis implementation. The low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) was able to yield results that were in good agreement with the DCB benchmark example. Results for the MMB benchmark cases, however, only captured the trend correctly. The user element (FNM-VCCT) always yielded results that were in excellent agreement with all benchmark cases, at a fraction of the analysis time. The ability to assess the implementation of two methods in one finite element code illustrated the value of establishing benchmark solutions.

FHWA Study Tour For European Traffic Monitoring Programs and Technologies

DOT National Transportation Integrated Search

1998-07-01

In March 1998, the Federal Highway Administration (FHWA) released the FHWA Traffic Noise Model [FHWA TNM (registered trademark)], Version 1.0, a state-of-the-art computer program for highway traffic noise prediction and analysis. Comparisons have sho...

Effect of Registered Partnership on Labor Earnings and Fertility for Same-Sex Couples: Evidence From Swedish Register Data.

PubMed

Aldén, Lina; Edlund, Lena; Hammarstedt, Mats; Mueller-Smith, Michael

2015-08-01

The expansion of legal rights to same-sex couples is a foot in a number of Western countries. The effects of this rollout are not only important in their own right but can also provide a window on the institution of marriage and the rights bundled therein. In this article, using Swedish longitudinal register data covering 1994-2007, we study the impact of the extension of rights to same-sex couples on labor earnings and fertility. In 1994, registered partnership for same-sex couples was introduced, which conferred almost all rights and obligations of marriage--a notable exception being joint legal parenting, by default or election. The latter was added in the 2002 adoption act. We find registered partnership to be important to both gays and lesbians but for different reasons. For gays, resource pooling emerges as the main function of registered partnerships. For lesbians, registered partnership appears to be an important vehicle for family formation, especially after the 2002 adoption act. In contrast to heterosexual couples (included for comparison), we find no evidence of household specialization among lesbians. The lack of specialization is noteworthy given similar fertility effects of registered partnership (after 2002) and the fact that lesbian couples were less assortatively matched (on education) than heterosexual couples--children and unequal earnings power being two factors commonly believed to promote specialization.

5 CFR 351.404 - Retention register.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Retention register. 351.404 Section 351.404 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS REDUCTION IN FORCE Scope of Competition § 351.404 Retention register. (a) When a competing employee is to be released...

5 CFR 351.404 - Retention register.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Retention register. 351.404 Section 351.404 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS REDUCTION IN FORCE Scope of Competition § 351.404 Retention register. (a) When a competing employee is to be released...

5 CFR 351.404 - Retention register.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Retention register. 351.404 Section 351.404 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS REDUCTION IN FORCE Scope of Competition § 351.404 Retention register. (a) When a competing employee is to be released...

5 CFR 351.404 - Retention register.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Retention register. 351.404 Section 351.404 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS REDUCTION IN FORCE Scope of Competition § 351.404 Retention register. (a) When a competing employee is to be released...

5 CFR 351.404 - Retention register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Retention register. 351.404 Section 351.404 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS REDUCTION IN FORCE Scope of Competition § 351.404 Retention register. (a) When a competing employee is to be released...

The Database Business: Managing Today--Planning for Tomorrow. Quality Assurance of Text and Image Databases at the U.S. Patent and Trademark Office.

ERIC Educational Resources Information Center

Grooms, David W.

1988-01-01

Discusses the quality controls imposed on text and image data that is currently being converted from paper to digital images by the Patent and Trademark Office. The methods of inspection used on text and on images are described, and the quality of the data delivered thus far is discussed. (CLB)

Performance (Off-Design) Cycle Analysis for a Turbofan Engine With Interstage Turbine Burner

NASA Technical Reports Server (NTRS)

Liew, K. H.; Urip, E.; Yang, S. L.; Mattingly, J. D.; Marek, C. J.

2005-01-01

This report presents the performance of a steady-state, dual-spool, separate-exhaust turbofan engine, with an interstage turbine burner (ITB) serving as a secondary combustor. The ITB, which is located in the transition duct between the high- and the low-pressure turbines, is a relatively new concept for increasing specific thrust and lowering pollutant emissions in modern jet-engine propulsion. A detailed off-design performance analysis of ITB engines is written in Microsoft(Registered Trademark) Excel (Redmond, Washington) macrocode with Visual Basic Application to calculate engine performances over the entire operating envelope. Several design-point engine cases are pre-selected using a parametric cycle-analysis code developed previously in Microsoft(Registered Trademark) Excel, for off-design analysis. The off-design code calculates engine performances (i.e. thrust and thrust-specific-fuel-consumption) at various flight conditions and throttle settings.

Degradation of Teflon(tm) FEP Following Charged Particle Radiation and Rapid Thermal Cycling

NASA Technical Reports Server (NTRS)

Townsend, Jacqueline A.; Powers, Charles E.; Viens, Michael J.; Ayres-Treusdell, Mary T.; Munoz, Bruno F.

1998-01-01

During the Second Servicing Mission (SM2) of the Hubble Space Telescope (HST) severe degradation was observed on the outer layer of the thermal control blankets. Astronaut observations and photographs revealed large cracks in the metallized Teflon' FEP (fluorinated ethylene propylene), the outer layer of the multi-layer insulation (MLI), in many locations around the telescope. In an effort to understand what elements of the space environment might cause such damage, pristine Teflon(registered trademark) FEP was tested for durability to radiation and thermal cycling. Specimens were subjected to electron and proton fluences comparable to those experienced by HST and were subsequently thermal cycled in a custom-built rapid thermal cycle chamber. Tensile tests of the specimens showed that radiation followed by thermal cycling significantly reduced the ultimate strength and elongation of Teflon(registered trademark) FEP.

31 CFR 306.16 - Exchanges of registered securities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Exchanges of registered securities.... SECURITIES Transfers, Exchanges and Reissues § 306.16 Exchanges of registered securities. No assignments will be required for: (a) Authorized denominational exchanges of registered securities for like securities...

An improved approach of register allocation via graph coloring

NASA Astrophysics Data System (ADS)

Gao, Lei; Shi, Ce

2005-03-01

Register allocation is an important part of optimizing compiler. The algorithm of register allocation via graph coloring is implemented by Chaitin and his colleagues firstly and improved by Briggs and others. By abstracting register allocation to graph coloring, the allocation process is simplified. As the physical register number is limited, coloring of the interference graph can"t succeed for every node. The uncolored nodes must be spilled. There is an assumption that almost all the allocation method obeys: when a register is allocated to a variable v, it can"t be used by others before v quit even if v is not used for a long time. This may causes a waste of register resource. The authors relax this restriction under certain conditions and make some improvement. In this method, one register can be mapped to two or more interfered "living" live ranges at the same time if they satisfy some requirements. An operation named merge is defined which can arrange two interfered nodes occupy the same register with some cost. Thus, the resource of register can be used more effectively and the cost of memory access can be reduced greatly.

77 FR 15390 - Certain Handbags, Luggage, Accessories, and Packaging Thereof; Notice of Request for Statements...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

..., and packaging thereof that infringe U.S. Trademark Registration Nos. 297,594; 1,643,625; 1,653,663; 2,773,107; 2,177,828; 2,181,753; and 1,519,828 registered to complainants Louis Vuitton Malletier S.A...

Novachip surface treatment : six year evaluation.

DOT National Transportation Integrated Search

2004-10-01

The NOVACHIPTM Surface Treatment process was developed by SCREG Routes STP in France in 1986. NOVACHIPTM is a registered trademark of Societe Internationale Routiere, which is a subsidiary of SCREG Routes STP. This process was developed to increase s...

Registered access: a 'Triple-A' approach.

PubMed

Dyke, Stephanie O M; Kirby, Emily; Shabani, Mahsa; Thorogood, Adrian; Kato, Kazuto; Knoppers, Bartha M

2016-12-01

We propose a standard model for a novel data access tier - registered access - to facilitate access to data that cannot be published in open access archives owing to ethical and legal risk. Based on an analysis of applicable research ethics and other legal and administrative frameworks, we discuss the general characteristics of this Registered Access Model, which would comprise a three-stage approval process: Authentication, Attestation and Authorization. We are piloting registered access with the Demonstration Projects of the Global Alliance for Genomics and Health for which it may provide a suitable mechanism for access to certain data types and to different types of data users.

46 CFR 401.510 - Operation without Registered Pilots.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 8 2011-10-01 2011-10-01 false Operation without Registered Pilots. 401.510 Section 401.510 Shipping COAST GUARD (GREAT LAKES PILOTAGE), DEPARTMENT OF HOMELAND SECURITY GREAT LAKES PILOTAGE REGULATIONS Penalties; Operations Without Registered Pilots § 401.510 Operation without Registered Pilots. (a...

Generic Detection of Register Realignment

NASA Astrophysics Data System (ADS)

Ďurfina, Lukáš; Kolář, Dušan

2011-09-01

The register realignment is a method of binary obfuscation and it is used by malware writers. The paper introduces the method how register realignment can be recognized by analysis based on the scattered context grammars. Such an analysis includes exploration of bytes affected by realignment, finding new valid values for them, building the scattered context grammar and parse an obfuscated code by this grammar. The created grammar has LL property--an ability for parsing by this type of grammar.

Generic Detection of Register Realignment

NASA Astrophysics Data System (ADS)

Durfina, Lukáš; Kolář, Dušan

2011-09-01

The register realignment is a method of binary obfuscation and it is used by malware writers. The paper introduces the method how register realignment can be recognized by analysis based on the scattered context grammars. Such an analysis includes exploration of bytes affected by realignment, finding new valid values for them, building the scattered context grammar and parse an obfuscated code by this grammar. The created grammar has LL property—an ability for parsing by this type of grammar.

Registered Nurse Persistence in Baccalaureate Education

ERIC Educational Resources Information Center

Krov, Kathleen Nadler

2010-01-01

There is a need to increase the number of baccalaureate prepared registered nurses to safely meet the complex healthcare needs of citizens of the United States. Since there is no research on the characteristics of registered nurse students persisting in baccalaureate education, this quantitative descriptive case study was designed to identify the…

California OCS Delegation Agreements Federal Register Notices

EPA Pesticide Factsheets

These federal register notices notify to the public that EPA has delegated authority to the agencies in the Federal Register Notices for sources within the 25 nautical miles of California's seaward boundary.

Human-Robot Interface Controller Usability for Mission Planning on the Move

DTIC Science & Technology

2012-11-01

5 Figure 3. Microsoft Xbox 360 controller for Windows...6 Figure 5. Microsoft Trackball Explorer. .........................................................................................7 Figure 6...Xbox 360 Controller is a registered trademark of Microsoft Corporation. 4 3.2.1 HMMWV The HMMWV was equipped with a diesel engine

Impact of over-the-top broadcast applications of Racer® on onion weed control

USDA-ARS?s Scientific Manuscript database

The weed control challenges for onion production are formidable; however, these challenges are even greater for those considering organic crop production. Organic onion producers need organic herbicides that can effectively provide post-emergent weed control. Racer (registered trademark) is a poten...

Reference Material Kydex(registered trademark)-100 Test Data Message for Flammability Testing

NASA Technical Reports Server (NTRS)

Engel, Carl D.; Richardson, Erin; Davis, Eddie

2003-01-01

The Marshall Space Flight Center (MSFC) Materials and Processes Technical Information System (MAPTIS) database contains, as an engineering resource, a large amount of material test data carefully obtained and recorded over a number of years. Flammability test data obtained using Test 1 of NASA-STD-6001 is a significant component of this database. NASA-STD-6001 recommends that Kydex 100 be used as a reference material for testing certification and for comparison between test facilities in the round-robin certification testing that occurs every 2 years. As a result of these regular activities, a large volume of test data is recorded within the MAPTIS database. The activity described in this technical report was undertaken to mine the database, recover flammability (Test 1) Kydex 100 data, and review the lessons learned from analysis of these data.

Anaphylactoid reaction during first hemofiltration with a PUREMA (registered trademark) polysulfone membrane

DTIC Science & Technology

2013-05-17

wide range of clinical presentations from mild to life threatening. We present a case of a 34 year old woman in the Burn Intensive Care Unit , who...P., Lundy J. B., Renz E. M., Chung K. K., 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS...ES) United States Army Institute of Surgical Research, JBSA Fort Sam Houston, TX 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING

Tribological Performance of Some Pennzane(Registered Trademark) Based Greases for Vacuum Applications

NASA Technical Reports Server (NTRS)

Marchetti, Mario; Jones, William R., Jr.; Street, Kenneth W.; Wheeler, Donald; Dixon, Duane; Jansen, Mark J.; Kimura, Hiroshi

2002-01-01

Commercial greases for space applications usually fulfill the requirements imposed by the severe conditions of use. The main requirement is their ability to create an EHL film, boundary film, or both under speed, load and temperature conditions that the mechanisms will operate. Three greases, all based on a multiply alkylated cyclopentane (Pennzan(R)) base oil, were studied. The thickeners were an n-octadecylterephthalamate soap, a lithium soap, and a urea derivative. A Four-Ball Tribometer and a Spiral Orbit Tribometer were employed to evaluate the greases under ultrahigh vacuum. Results indicated that all three greases yielded very low wear rates and extended lifetimes. In addition, routine physical property data is reported for each grease.

Australian immunisation registers: established foundations and opportunities for improvement.

PubMed

Chin, L K; Crawford, N W; Rowles, G; Buttery, J P

2012-04-19

The National Immunisation Program Schedule in Australia is formulated and funded nationally under the population-wide Medicare system. The policy is implemented by the eight state and territory jurisdictions. The national immunisation registers consist of the Australian Childhood Immunisation Register (ACIR), and, more recently, the National Human Papillomavirus (HPV) Vaccination Program Register. Moreover, a variety of jurisdiction-based registers and primary care practice software systems exist, which interact with the national registers. General practitioners can obtain reports listing patients under seven years attending their practice and recorded as 'not fully immunised', and immunisation coverage rates for their practice linked to government incentives through Medicare. A 2011 report documents national coverage of 91.8% fully immunised at 12 months, and 92.6% at 24 months. The HPV register provides information on vaccination coverage with the potential to link with a register of cervical cancer screening results. Limitations of current national register include inability to easily access immunisation histories beyond seven years of age, and issues of underreporting and timeliness, which impact significantly the immunisation coverage estimates. The linkage of these registers with healthcare outcome data will further enhance public health outcomes by enabling rapid, population-level vaccine safety and effectiveness investigations in a nation with a track record as an 'early adopter' of new childhood vaccines.

Registered nurses' perceptions of rewarding and its significance.

PubMed

Seitovirta, Jaana; Lehtimäki, Aku-Ville; Vehviläinen-Julkunen, Katri; Mitronen, Lasse; Kvist, Tarja

2017-11-07

To examine reward type preferences and their relationships with the significance of rewarding perceived by registered nurses in Finland. Previous studies have found relationships between nurses' rewarding and their motivation at work, job satisfaction and organisational commitment. Data were collected in a cross-sectional, descriptive, questionnaire survey from 402 registered nurses using the Registered Nurses' Perceptions of Rewarding Scale in 2015, and analysed with descriptive and multivariate statistical methods. Registered nurses assigned slightly higher values to several non-financial than to financial rewards. The non-financial reward types appreciation and feedback from work community, worktime arrangements, work content, and opportunity to develop, influence and participate were highly related to the significance of rewarding. We identified various rewards that registered nurses value, and indications that providing an appropriate array of rewards, particularly non-financial rewards, is a highly beneficial element of nursing management. It is important to understand the value of rewards for nursing management. Nurse managers should offer diverse rewards to their registered nurses to promote excellent performance and to help efforts to secure and maintain high-quality, safe patient care. The use of appropriate rewards is especially crucial to improving registered nurses' reward satisfaction and job satisfaction globally in the nursing profession. © 2017 John Wiley & Sons Ltd.

Progress on 58 m2 Passive Resonant Ring Laser Gyroscope,

DTIC Science & Technology

Pad; design of the optical-mechanical hardware to input the laser to the ring; investigations to insure against ZERODUR bar buckling associated with the...ring evacuation force; verification of ZERODUR physical properties which are key to this application, e.g. compressibility resulting from the usual

A study of patients not registered in the Swedish Cancer Register but reported to the Swedish Register of Palliative Care 2009 as deceased due to cancer.

PubMed

Nilsson, Martin; Tavelin, Björn; Axelsson, Bertil

2014-03-01

The Swedish Cancer Register (SCR), an old and reputable health data register, contributes a large amount of data used in research. The quality of the research using SCR data depends on the completeness and validity of the register. In Sweden, every healthcare provider is obligated to report newly detected cases of cancer to the SCR regardless of the diagnostic basis. This study aimed to clarify whether there is an under-reporting of patients with cancer to the SCR or an over-reporting of cancer as cause of death to the SRPC as all patients do not appear in both registers. In addition, this study looked at the distribution of under-reporting or over-reporting related to age, sex, type of cancer, diagnostic basis, and department responsible for cancer diagnosis. Of the 10 559 patients whose cause of death was cancer as reported to the SRPC (2009), 1394 patients (13.2%) were not registered in the SCR (1958-2009). Medical records from a representative sample of 203 patients were collected and reviewed. The medical records for 193 patients were obtained; of those, 183 (95%) patients should have been reported to the SCR. Among these, radiologic investigation was the most common basis for diagnosis and there was a significant over-representation of cancer of the pancreas, lung, liver, and bile ducts. This study cannot quantify the completeness of the SCR. The findings indicate that 12.5% of patients dying of cancer in palliative care are not reported, that specialized hospital departments diagnose the vast majority of the unreported patients, and that routines for how to report patients to the SCR based on radiological findings should be revised.

The Ecology and Environmental Impacts of Hydrilla

DTIC Science & Technology

1992-10-15

in the dewatered areas. The drawdown also encouraged the germination of waterhyacinth seeds in the dewatered areas. Plant Analysis The productivity of...controls hydrilla in most situations. Sonar is the DowElanco registered trademark for products containing the active ingredient fluridone . Sonar aquatic

Over-the-top broadcast applications of ammonium nonanoate on onion weed control, crop injury, and yields

USDA-ARS?s Scientific Manuscript database

Racer (registered trademark) (40% ammonium nonanoate) is a potential herbicide for organically grown food crops. Ammonium nonanoate occurs in nature and is primarily formed from biodegradation of higher fatty acids. Research was conducted in southeast Oklahoma to determine the effect of applicatio...

Over-the-top broadcast applications of Racer® on onion weed control, crop injury, and yields

USDA-ARS?s Scientific Manuscript database

Racer (registered trademark) (40% ammonium nonanoate) is a potential herbicide for organically grown food crops. Ammonium nonanoate occurs in nature and is primarily formed from biodegradation of higher fatty acids. Research was conducted in southeast Oklahoma to determine the effect of applicatio...

The Changing Well-Being of Older Adult Registered Indians: An Analysis Using the Registered Indian Human Development Index

ERIC Educational Resources Information Center

Cooke, Martin; Guimond, Eric; McWhirter, Jennifer

2008-01-01

The demographic aging of the Registered Indian population suggests that the social, economic, and health conditions of older Registered Indians will be increasingly important for communities and policymakers. We have adapted the United Nations Development Program's Human Development Index using data from the Census of Canada and the Indian…

49 CFR 1103.1 - Register of practitioners.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Register of practitioners. 1103.1 Section 1103.1 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE PRACTITIONERS General Information § 1103.1 Register of...

7 CFR 3015.204 - Federal Register publications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 15 2012-01-01 2012-01-01 false Federal Register publications. 3015.204 Section 3015.204 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF THE CHIEF FINANCIAL... Register publications. (a) Program regulations. Most grant programs have program-specific regulations...

7 CFR 3015.204 - Federal Register publications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 15 2013-01-01 2013-01-01 false Federal Register publications. 3015.204 Section 3015.204 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF THE CHIEF FINANCIAL... Register publications. (a) Program regulations. Most grant programs have program-specific regulations...

Electrochemical, Polarization, and Crevice Corrosion Testing of Nitinol 60, A Supplement to the ECLSS Sustaining Materials Compatibility Study

NASA Technical Reports Server (NTRS)

Lee, R. E.

2016-01-01

In earlier trials, electrochemical test results were presented for six noble metals evaluated in test solutions representative of waste liquids processed in the Environmental Control and Life Support System (ECLSS) aboard the International Space Station (ISS). Subsequently, a seventh metal, Nitinol 60, was added for evaluation and subjected to the same test routines, data analysis, and theoretical methodologies. The previous six test metals included three titanium grades, (commercially pure, 6Al-4V alloy and 6Al-4V low interstitial alloy), two nickel-chromium alloys (Inconel(RegisteredTrademark) 625 and Hastelloy(RegisteredTrademark) C276), and one high-tier stainless steel (Cronidur(RegisteredTrademark) 30). The three titanium alloys gave the best results of all the metals, indicating superior corrosive nobility and galvanic protection properties. For this current effort, the results have clearly shown that Nitinol 60 is almost as noble as titanium, being very corrosion-resistant and galvanically compatible with the other six metals electrochemically and during long-term exposure. is also quite noble as it is very corrosion resistant and galvanically compatible with the other six metals from both an electrochemical perspective and long-term crevice corrosion scenario. This was clearly demonstrated utilizing the same techniques for linear, Tafel and cyclic polarization, and galvanic coupling of the metal candidate as was done for the previous study. The high nobility and low corrosion susceptibility for Nitinol 60 appear to be intermediate to the nickel/chromium alloys and the titanium metals with indications that are more reflective of the titanium metals in terms of general corrosion and pitting behavior.

Features of the Upgraded Imaging for Hypersonic Experimental Aeroheating Testing (IHEAT) Software

NASA Technical Reports Server (NTRS)

Mason, Michelle L.; Rufer, Shann J.

2016-01-01

The Imaging for Hypersonic Experimental Aeroheating Testing (IHEAT) software is used at the NASA Langley Research Center to analyze global aeroheating data on wind tunnel models tested in the Langley Aerothermodynamics Laboratory. One-dimensional, semi-infinite heating data derived from IHEAT are used in the design of thermal protection systems for hypersonic vehicles that are exposed to severe aeroheating loads, such as reentry vehicles during descent and landing procedures. This software program originally was written in the PV-WAVE(Registered Trademark) programming language to analyze phosphor thermography data from the two-color, relative-intensity system developed at Langley. To increase the efficiency, functionality, and reliability of IHEAT, the program was migrated to MATLAB(Registered Trademark) syntax and compiled as a stand-alone executable file labeled version 4.0. New features of IHEAT 4.0 include the options to perform diagnostic checks of the accuracy of the acquired data during a wind tunnel test, to extract data along a specified multi-segment line following a feature such as a leading edge or a streamline, and to batch process all of the temporal frame data from a wind tunnel run. Results from IHEAT 4.0 were compared on a pixel level to the output images from the legacy software to validate the program. The absolute differences between the heat transfer data output from the two programs were on the order of 10(exp -5) to 10(exp -7). IHEAT 4.0 replaces the PV-WAVE(Registered Trademark) version as the production software for aeroheating experiments conducted in the hypersonic facilities at NASA Langley.

12 CFR 1102.304 - Federal Register publication.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Federal Register publication. 1102.304 Section 1102.304 Banks and Banking FEDERAL FINANCIAL INSTITUTIONS EXAMINATION COUNCIL APPRAISER REGULATION Description of Office, Procedures, Public Information § 1102.304 Federal Register publication. The ASC...

12 CFR 1102.304 - Federal Register publication.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Federal Register publication. 1102.304 Section 1102.304 Banks and Banking FEDERAL FINANCIAL INSTITUTIONS EXAMINATION COUNCIL APPRAISER REGULATION Description of Office, Procedures, Public Information § 1102.304 Federal Register publication. The ASC...

30 CFR 45.4 - Independent contractor register.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Independent contractor register. 45.4 Section... ADMINISTRATIVE REQUIREMENTS INDEPENDENT CONTRACTORS § 45.4 Independent contractor register. (a) Each independent contractor shall provide the production-operator in writing the following information: (1) The independent...

GeneChip{sup {trademark}} screening assay for cystic fibrosis mutations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cronn, M.T.; Miyada, C.G.; Fucini, R.V.

1994-09-01

GeneChip{sup {trademark}} assays are based on high density, carefully designed arrays of short oligonucleotide probes (13-16 bases) built directly on derivatized silica substrates. DNA target sequence analysis is achieved by hybridizing fluorescently labeled amplification products to these arrays. Fluorescent hybridization signals located within the probe array are translated into target sequence information using the known probe sequence at each array feature. The mutation screening assay for cystic fibrosis includes sets of oligonucleotide probes designed to detect numerous different mutations that have been described in 14 exons and one intron of the CFTR gene. Each mutation site is addressed by amore » sub-array of at least 40 probe sequences, half designed to detect the wild type gene sequence and half designed to detect the reported mutant sequence. Hybridization with homozygous mutant, homozygous wild type or heterozygous targets results in distinctive hybridization patterns within a sub-array, permitting specific discrimination of each mutation. The GeneChip probe arrays are very small (approximately 1 cm{sup 2}). There miniature size coupled with their high information content make GeneChip probe arrays a useful and practical means for providing CF mutation analysis in a clinical setting.« less

16 CFR 300.4 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 300.4 Section 300.4 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULES AND REGULATIONS UNDER THE WOOL PRODUCTS LABELING ACT OF 1939 Labeling § 300.4 Registered...

12 CFR 528.6 - Loan application register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Loan application register. 528.6 Section 528.6 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY NONDISCRIMINATION... Mortgage Disclosure Act Loan Application Registers with the Office of Thrift Supervision in accordance with...

48 CFR 27.305-3 - Securing invention rights acquired by the Government.

Code of Federal Regulations, 2010 CFR

2010-10-01

... in the U.S. Patent and Trademark Office (see Executive Order 9424, Establishing in the United States Patent Office a Register of Government Interests in Patents and Applications for Patents, (February 18... ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights under...

48 CFR 27.305-3 - Securing invention rights acquired by the Government.

Code of Federal Regulations, 2012 CFR

2012-10-01

... in the U.S. Patent and Trademark Office (see Executive Order 9424, Establishing in the United States Patent Office a Register of Government Interests in Patents and Applications for Patents, (February 18... ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights under...

76 FR 19977 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

... DEPARTMENT OF COMMERCE Patent and Trademark Office Submission for OMB Review; Comment Request The... such marks, in interstate commerce may file an application to register their marks with the USPTO. In...-profit. Frequency: On occasion. Respondent's Obligation: Required to obtain or retain benefits. OMB Desk...

37 CFR 203.4 - Methods of operation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 203.4 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES FREEDOM OF INFORMATION ACT: POLICIES AND PROCEDURES Procedures § 203.4 Methods of... refusals to register claims to copyright; statements of policy and interpretations which have been adopted...

76 FR 79748 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

..., confirming that ``iShares[supreg]'' is a registered trademark of BlackRock Institutional Trust Company, N.A...''), NYSEArca (``Arca''), BATS Global Markets (``BATS''), Boston Options Exchange (``BOX''), Chicago Board... to the applicable ETF option interval standards of other options markets.\\6\\ \\6\\ See, for example...

48 CFR 27.305-3 - Securing invention rights acquired by the Government.

Code of Federal Regulations, 2013 CFR

2013-10-01

... in the U.S. Patent and Trademark Office (see Executive Order 9424, Establishing in the United States Patent Office a Register of Government Interests in Patents and Applications for Patents, (February 18... ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights under...

48 CFR 27.305-3 - Securing invention rights acquired by the Government.

Code of Federal Regulations, 2011 CFR

2011-10-01

... in the U.S. Patent and Trademark Office (see Executive Order 9424, Establishing in the United States Patent Office a Register of Government Interests in Patents and Applications for Patents, (February 18... ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights under...

48 CFR 27.305-3 - Securing invention rights acquired by the Government.

Code of Federal Regulations, 2014 CFR

2014-10-01

... in the U.S. Patent and Trademark Office (see Executive Order 9424, Establishing in the United States Patent Office a Register of Government Interests in Patents and Applications for Patents, (February 18... ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights under...

A m-ary linear feedback shift register with binary logic

NASA Technical Reports Server (NTRS)

Perlman, M. (Inventor)

1973-01-01

A family of m-ary linear feedback shift registers with binary logic is disclosed. Each m-ary linear feedback shift register with binary logic generates a binary representation of a nonbinary recurring sequence, producible with a m-ary linear feedback shift register without binary logic in which m is greater than 2. The state table of a m-ary linear feedback shift register without binary logic, utilizing sum modulo m feedback, is first tubulated for a given initial state. The entries in the state table are coded in binary and the binary entries are used to set the initial states of the stages of a plurality of binary shift registers. A single feedback logic unit is employed which provides a separate feedback binary digit to each binary register as a function of the states of corresponding stages of the binary registers.

12 CFR 309.3 - Federal Register publication.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Federal Register publication. 309.3 Section 309.3 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE DISCLOSURE OF INFORMATION § 309.3 Federal Register publication. The FDIC publishes the following information in...

12 CFR 309.3 - Federal Register publication.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Federal Register publication. 309.3 Section 309.3 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE DISCLOSURE OF INFORMATION § 309.3 Federal Register publication. The FDIC publishes the following information in...

31 CFR 537.323 - U.S. registered money transmitter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false U.S. registered money transmitter. 537.323 Section 537.323 Money and Finance: Treasury Regulations Relating to Money and Finance... General Definitions § 537.323 U.S. registered money transmitter. The term U.S. registered money...

31 CFR 538.319 - U.S. registered money transmitter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false U.S. registered money transmitter. 538.319 Section 538.319 Money and Finance: Treasury Regulations Relating to Money and Finance... General Definitions § 538.319 U.S. registered money transmitter. The term U.S. registered money...

12 CFR 209.5 - The share register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CANCELLATION OF FEDERAL RESERVE BANK CAPITAL STOCK (REGULATION I) § 209.5 The share register. (a) Electronic or... cancellation dates and prices of shares cancelled, as the case may be. ... 12 Banks and Banking 2 2010-01-01 2010-01-01 false The share register. 209.5 Section 209.5 Banks...

Register Formation among Sri Lankan University Youth

ERIC Educational Resources Information Center

Zubair, Cala A.

2011-01-01

This linguistic and ethnographic project examines register formation among a community of Sri Lankan university youth. The Raggers group at the University of Peradeniya (Kandy, Sri Lanka) has strict rules forbidding the use of English and supporting a register of Sinhala made up of linguistic features from different Sinhala varieties. Detailing…

31 CFR 538.319 - U.S. registered money transmitter.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false U.S. registered money transmitter. 538.319 Section 538.319 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 538.319 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 538.319 - U.S. registered money transmitter.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false U.S. registered money transmitter. 538.319 Section 538.319 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 538.319 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 538.319 - U.S. registered money transmitter.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false U.S. registered money transmitter. 538.319 Section 538.319 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 538.319 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 538.319 - U.S. registered money transmitter.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false U.S. registered money transmitter. 538.319 Section 538.319 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 538.319 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 542.323 - U.S. registered money transmitter.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false U.S. registered money transmitter. 542.323 Section 542.323 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 542.323 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 537.323 - U.S. registered money transmitter.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false U.S. registered money transmitter. 537.323 Section 537.323 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 537.323 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 537.323 - U.S. registered money transmitter.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false U.S. registered money transmitter. 537.323 Section 537.323 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 537.323 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 537.323 - U.S. registered money transmitter.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false U.S. registered money transmitter. 537.323 Section 537.323 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 537.323 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

31 CFR 537.323 - U.S. registered money transmitter.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false U.S. registered money transmitter. 537.323 Section 537.323 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... Definitions § 537.323 U.S. registered money transmitter. The term U.S. registered money transmitter means any...

7 CFR 57.690 - Person required to register.

Code of Federal Regulations, 2010 CFR

2010-01-01

... business will be required to register before they start operations. [69 FR 571688, Sept. 24, 2004... hatcheries, are required to register with the Department by furnishing their name, place of business, and...

Safety in the Chemical Laboratory.

ERIC Educational Resources Information Center

Gerlach, Rudolph

1986-01-01

Background information is provided on the registered trademark "TLV" (Threshold Limit Value), the term used to express tolerable concentrations. The TLV of a compound is an estimate extrapolated from some defined damage to humans or animals at higher concentrations or by drawing analogies between similar concentrations. (JN)

Thermal Conductivity Effects on SHS (Self-Propagating High-Temperature Synthesis Reactions.

DTIC Science & Technology

1988-03-01

charcoal , soot and lampblack also exist. Actually these so called amorphous carbons are microcrystalline forms of graphite sometimes containing only a few...in Chemical Technology and Metallurgy , pp. 174, Moscow, USSR, 1975. 24. The word APPLE is a registered trademark of APPLE COMPUTER INC., 10260 Bandley

37 CFR 202.16 - Preregistration of copyrights.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 202.16 Section 202.16 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS... Open and Maintain a Deposit Account in the Copyright Office,” or write the Register of Copyrights, Copyright Office, Library of Congress, Washington, D.C. 20559. (B) Credit cards, debit cards and electronic...

37 CFR 202.16 - Preregistration of copyrights.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 202.16 Section 202.16 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS... Open and Maintain a Deposit Account in the Copyright Office,” or write the Register of Copyrights, Copyright Office, Library of Congress, Washington, D.C. 20559. (B) Credit cards, debit cards and electronic...

37 CFR 351.1 - Initiation of proceedings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the distribution of royalty fees, shall be initiated by publication in the Federal Register of a.... 351.1 Section 351.1 Patents, Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS COPYRIGHT ROYALTY JUDGES RULES AND PROCEDURES PROCEEDINGS § 351.1 Initiation of proceedings. (a) Notice of...

12 CFR 209.5 - The share register.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false The share register. 209.5 Section 209.5 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM ISSUE AND CANCELLATION OF FEDERAL RESERVE BANK CAPITAL STOCK (REGULATION I) § 209.5 The share register. (a) Electronic or...

Simulating the Response of a Composite Honeycomb Energy Absorber. Part 1; Dynamic Crushing of Components and Multi-Terrain Impacts

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Polanco, Michael A.

2012-01-01

This paper describes the experimental and analytical evaluation of an externally deployable composite honeycomb structure that is designed to attenuate impact energy during helicopter crashes. The concept, designated the Deployable Energy Absorber (DEA), utilizes an expandable Kevlar (Registered Trademark) honeycomb to dissipate kinetic energy through crushing. The DEA incorporates a unique flexible hinge design that allows the honeycomb to be packaged and stowed until needed for deployment. Experimental evaluation of the DEA included dynamic crush tests of multi-cell components and vertical drop tests of a composite fuselage section, retrofitted with DEA blocks, onto multi-terrain. Finite element models of the test articles were developed and simulations were performed using the transient dynamic code, LSDYNA (Registered Trademark). In each simulation, the DEA was represented using shell elements assigned two different material properties: Mat 24, an isotropic piecewise linear plasticity model, and Mat 58, a continuum damage mechanics model used to represent laminated composite fabrics. DEA model development and test-analysis comparisons are presented.

NASA-STD-6001B Test 7: Impact of Test Methodology and Detection Advancements on the Obsolescence of Historical Offgas Data

NASA Technical Reports Server (NTRS)

Buchanan, Vanessa D.; Woods, Brenton; Harper, Susana A.; Beeson, Harold D.; Perez, Horacio; Ryder, Valerie; Tapia, Alma S.; Pedley, Michael D.

2017-01-01

NASA-STD-6001B states "all nonmetals tested in accordance with NASA-STD-6001 should be retested every 10 years or as required by the responsible program/project." The retesting of materials helps ensure the most accurate data are used in material selection. Manufacturer formulas and processes can change over time, sometimes without an update to product number and material information. Material performance in certain NASA-STD-6001 tests can be particularly vulnerable to these changes, such as material offgas (Test 7). In addition, Test 7 analysis techniques at NASA White Sands Test Facility were dramatically enhanced in the early 1990s, resulting in improved detection capabilities. Low level formaldehyde identification was improved again in 2004. Understanding the limitations in offgas analysis data prior to 1990 puts into question the validity and current applicability of that data. Case studies on Super Koropon (Registered trademark) and Aeroglaze (Registered trademark) topcoat highlight the importance of material retesting.

Non-Academic Jobs for Fellows in Law Firms, Patent and Trademark Office and Scientific Intellectual Property | Center for Cancer Research

Cancer.gov

This workshop helps CCR fellows and staff scientists learn about and better position themselves for potential job opportunities at law firms, patent and trademark, and intellectual property protection across the biotechnology and pharmaceutical industries. Guest speakers will shed light on how to best position yourself for obtaining these types of positions and how to improve your chances of success. They will describe ways in which you can use your time at NIH to better prepare for opportunities that may arise down the road in these fields.

Reuma.pt - the rheumatic diseases portuguese register.

PubMed

Canhão, H; Faustino, A; Martins, F; Fonseca, J E

2011-01-01

Since June 2008, Portuguese rheumatologists have been collecting on a routine basis, data into the nationwide Reuma.pt, the Rheumatic Diseases Portuguese Register from the Portuguese Society of Rheumatology (SPR), which includes rheumatic patients (rheumatoid arthritis - RA, ankylosing spondylitis - AS, psoriatic arthritis - PsA and juvenile idiopathic arthritis - JIA) receiving biological therapies or patients receiving synthetic disease modifying anti-rheumatic drugs (DMARDs). The aim of this publication is to describe the structure of Reuma.pt and the population registered since June 2008. Demographic and anthropometric data, life style habits, work status, co-morbidities, disease activity and functional assessment scores, previous and current therapies, adverse events codified by the Medical Dictionary for Regulatory Activities (MedDRA), reasons for discontinuation and laboratory measurements are registered at each visit. The platform is based on a structured electronic medical record linked to a SQL Server database. All Rheumatology Departments assigned to the Portuguese National Health Service (n=21), 2 Military Hospitals (Lisboa and Porto), 1 public-private Institution and 6 private centers adhered to the Register. Until now, 18 centers have entered data into Reuma.pt. By January 2011, 3438 patients and 16130 visits had been registered. 2162 (63%) were RA patients, 700 of them treated with biological agents and 1462 with synthetic DMARDs. From the 515 (15%) AS patients, 297 were medicated with biological and 218 with non-biological therapies. 293 (8%) were PsA patients, 151 treated with biological drugs and 142 with other treatment strategies. 368 (11%) had the diagnosis of JIA, 68 were under biological treatment and 300 were managed with other treatment options. The register also includes 100 (3%) patients with other rheumatic diseases, submitted to treatments that required hospital day care infusions including 18 exposed to biological therapies. Registers

Malaysian registered nurses' professional learning.

PubMed

Chiu, Lee H

2006-01-01

Findings of a study of the impact of professional learning on Malaysian registered nurses are reported. The offshore delivery post-registration nursing degree programme is a formal aspect of professional learning, which enables Malaysian registered nurses to upgrade their hospital-based training or diploma of nursing qualification to a degree. Using a qualitative case study approach, data were collected from twelve programme graduates, through individual and focus group interviews. The programme promoted their personal professional growth and enhanced their professional development. It increased self-confidence, knowledge, self-fulfillment, critical thinking ability, interpersonal skills, interest in research and research utilisation, and life-long learning. There was evidence of career mobility and a raised awareness of their professional role and responsibility.

COSTMODL - AN AUTOMATED SOFTWARE DEVELOPMENT COST ESTIMATION TOOL

NASA Technical Reports Server (NTRS)

Roush, G. B.

1994-01-01

Professional 5.0 for recompilation. An executable is provided on the distribution diskettes. COSTMODL requires 512K RAM. The standard distribution medium for COSTMODL is three 5.25 inch 360K MS-DOS format diskettes. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. COSTMODL was developed in 1991. IBM PC is a registered trademark of International Business Machines. Borland and Turbo Pascal are registered trademarks of Borland International, Inc. Turbo Professional is a trademark of TurboPower Software. MS-DOS is a registered trademark of Microsoft Corporation. Turbo Professional is a trademark of TurboPower Software.

An analysis of characteristics of post-authorisation studies registered on the ENCePP EU PAS Register

PubMed Central

Carroll, Robert; Ramagopalan, Sreeram V.; Cid-Ruzafa, Javier; Lambrelli, Dimitra; McDonald, Laura

2017-01-01

Background: The objective of this study was to investigate the study design characteristics of Post-Authorisation Studies (PAS) requested by the European Medicines Agency which were recorded on the European Union (EU) PAS Register held by the European Network of Centres for Pharmacoepidemiology and Pharmacovigilance (ENCePP). Methods: We undertook a cross-sectional descriptive analysis of all studies registered on the EU PAS Register as of 18 th October 2016. Results: We identified a total of 314 studies on the EU PAS Register, including 81 (26%) finalised, 160 (51%) ongoing and 73 (23%) planned. Of those studies identified, 205 (65%) included risk assessment in their scope, 133 (42%) included drug utilisation and 94 (30%) included effectiveness evaluation. Just over half of the studies (175; 56%) used primary data capture, 135 (43%) used secondary data and 4 (1%) used a hybrid design combining both approaches. Risk assessment and effectiveness studies were more likely to use primary data capture (60% and 85% respectively as compared to 39% and 14% respectively for secondary). The converse was true for drug utilisation studies where 59% were secondary vs. 39% for primary. For type 2 diabetes mellitus, database studies were more commonly used (80% vs 3% chart review, 3% hybrid and 13% primary data capture study designs) whereas for studies in oncology, primary data capture were more likely to be used (85% vs 4% chart review, and 11% database study designs). Conclusions: Results of this analysis show that PAS design varies according to study objectives and therapeutic area. PMID:29188016

The effects of a FRAX revision for the US

USDA-ARS?s Scientific Manuscript database

The aim of this study was to determine the effects of a revision of the epidemiological data used to compute fracture probabilities in the US with FRAX (registered trademark). Models were constructed to compute fracture probabilities based on updated epidemiology of fracture in the US. The models c...

Getting to Outcomes: A Best Practice Process to Help Schools Achieve Desired Outcomes

ERIC Educational Resources Information Center

Maras, Melissa A.; Wandersman, Abe; Splett, Joni Williams; Flaspohler, Paul; Weist, Mark

2012-01-01

This article describes Getting to Outcomes (GTO), a 10-step framework for accountability designed to facilitate effective implementation of evidence-based programs and improvement of home-grown practices (Getting to Outcomes and GTO are trademarks registered by the University of South Carolina and RAND; Wandersman, Imm, Chinman, & Kaftarian,…

Bioenergy | National Agricultural Library

Science.gov Websites

Skip to main content Home National Agricultural Library United States Department of Agriculture Ag , graphs), Agricultural Products html Data from: Comparative farm-gate life cycle assessment of oilseed registered trademark of Dries Buytaert. NAL Home | USDA.gov | Agricultural Research Service | Plain Language

Ada--Programming Language of the Future.

ERIC Educational Resources Information Center

Rudd, David

1983-01-01

Ada is a programing language developed for the Department of Defense, with a registered trademark. It was named for Ada Augusta, coworker of Charles Babbage and the world's first programer. The Department of Defense hopes to prevent variations and to establish Ada as a consistent, standardized language. (MNS)

The Benefits and Challenges of Registered Apprenticeship: The Sponsors' Perspective

ERIC Educational Resources Information Center

Lerman, Robert; Eyster, Lauren; Chambers, Kate

2009-01-01

The Employment and Training Administration (ETA) of the U.S. Department of Labor oversees the registered apprenticeship system by issuing standards, monitoring state agencies, and promoting registered apprenticeship. Registered apprenticeship program "sponsors" are individual employers or groups of employers (sometimes in collaboration with…

Registered Nurses' perceptions of their work and professional development.

PubMed

Hallin, Karin; Danielson, Ella

2008-01-01

This paper is a report of a study to elucidate Registered Nurses' perceptions of their work and professional development 6 years after graduation. Nursing education and health care has rapidly changed in the last two decades. Education and experience are important components in Registered Nurses' ability to promote a high quality of care, but a great deal depends on their work circumstances. This study emphasizes Registered Nurses' view of their work in health care, at a time in their career when they have several years of experience. Data were collected in 2003 from in-depth interviews with 15 Registered Nurses 6 years after their graduation. The interviews were semi-structured and analysed with interpretive content analysis. The findings revealed two themes and five sub-themes. The first theme, An appropriate but demanding profession, consisted of two sub-themes: 'having found one's niche' and 'growing old in nursing may be difficult'. The second theme, A profession with opportunities and obstacles, consisted of three sub-themes: 'being aware of Registered Nurses' potential', 'having knowledge that is seldom made use of' and 'attaining professional growth is no matter of course'. Keeping Registered Nurses' satisfied and avoiding their dissatisfaction is crucial for both educators and employers. It is essential that employers give priority to Registered Nurses' time with patients and to motivate and support them in professional development. Further intervention studies regarding a change of the balance between obstacles and opportunities are needed.

The Austrian Toxoplasmosis Register, 1992-2008.

PubMed

Prusa, Andrea-Romana; Kasper, David C; Pollak, Arnold; Gleiss, Andreas; Waldhoer, Thomas; Hayde, Michael

2015-01-15

We aimed to determine the incidence of primary gestational infections with Toxoplasma gondii and congenital toxoplasmosis in Austria, a country with a nationwide prenatal serological screening program since 1974. We analyzed retrospective data from the Austrian Toxoplasmosis Register of pregnant women with Toxoplasma infection and their offspring with births between 1992 and 2008, identified by the prenatal mandatory screening program. Treatment was administered to women from diagnosis of a Toxoplasma infection until delivery. Infected infants were treated up to 1 year of life routinely. Clinical manifestations in infected infants were monitored at least for 1 year and documented in the register. The Austrian Toxoplasmosis Register included 2147 pregnant women with suspected Toxoplasma infection. Annually, 8.5 per 10 000 women acquired Toxoplasma infection during pregnancy, and 1.0 per 10 000 infants had congenital toxoplasmosis (13% mean transmission rate). Our data showed that women treated according to the Austrian scheme had a 6-fold decrease in the maternofetal transmission rate compared to women without treatment. Results from the Austrian Toxoplasmosis Register show the efficiency of the prenatal screening program. Our results are of clinical relevance for infants, healthcare systems, and policy makers to consider preventive Toxoplasma screening as a potential tool to reduce the incidence of congenital toxoplasmosis. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Poor reporting of scientific leadership information in clinical trial registers.

PubMed

Sekeres, Melanie; Gold, Jennifer L; Chan, An-Wen; Lexchin, Joel; Moher, David; Van Laethem, Marleen L P; Maskalyk, James; Ferris, Lorraine; Taback, Nathan; Rochon, Paula A

2008-02-20

In September 2004, the International Committee of Medical Journal Editors (ICMJE) issued a Statement requiring that all clinical trials be registered at inception in a public register in order to be considered for publication. The World Health Organization (WHO) and ICMJE have identified 20 items that should be provided before a trial is considered registered, including contact information. Identifying those scientifically responsible for trial conduct increases accountability. The objective is to examine the proportion of registered clinical trials providing valid scientific leadership information. We reviewed clinical trial entries listing Canadian investigators in the two largest international and public trial registers, the International Standard Randomized Controlled Trial Number (ISRCTN) register, and ClinicalTrials.gov. The main outcome measures were the proportion of clinical trials reporting valid contact information for the trials' Principal Investigator (PI)/Co-ordinating Investigator/Study Chair/Site PI, and trial e-mail contact address, stratified by funding source, recruiting status, and register. A total of 1388 entries (142 from ISRCTN and 1246 from ClinicalTrials.gov) comprised our sample. We found non-compliance with mandatory registration requirements regarding scientific leadership and trial contact information. Non-industry and partial industry funded trials were significantly more likely to identify the individual responsible for scientific leadership (OR = 259, 95% CI: 95-701) and to provide a contact e-mail address (OR = 9.6, 95% CI: 6.6-14) than were solely industry funded trials. Despite the requirements set by WHO and ICMJE, data on scientific leadership and contact e-mail addresses are frequently omitted from clinical trials registered in the two leading public clinical trial registers. To promote accountability and transparency in clinical trials research, public clinical trials registers should ensure adequate monitoring of trial

Radiometric Characterization Results for the IKONOS, Quickbird, and OrbView-3 Sensor

NASA Technical Reports Server (NTRS)

Holekamp, Kara; Aaron, David; Thome, Kurtis

2006-01-01

Radiometric calibration of commercial imaging satellite products is required to ensure that science and application communities better understand commercial imaging satellite properties. Inaccurate radiometric calibrations can lead to erroneous decisions and invalid conclusions and can limit intercomparisons with other systems. To address this calibration need, the NASA Applied Sciences Directorate (ASD) at Stennis Space Center established a commercial satellite imaging radiometric calibration team consisting of three independent groups: NASA ASD, the University of Arizona Remote Sensing Group, and South Dakota State University. Each group independently determined the absolute radiometric calibration coefficients of available high-spatial-resolution commercial 4-band multispectral products, in the visible though near-infrared spectrum, from GeoEye(tradeMark) (formerly SpaceImaging(Registered TradeMark)) IKONOS, DigitalGlobe(Regitered TradeMark) QuickBird, and GeoEye (formerly ORBIMAGE(Registered TradeMark) OrbView. Each team member employed some variant of reflectance-based vicarious calibration approach, requiring ground-based measurements coincident with image acquisitions and radiative transfer calculations. Several study sites throughout the United States that covered a significant portion of the sensor's dynamic range were employed. Satellite at-sensor radiance values were compared to those estimated by each independent team member to evaluate the sensor's radiometric accuracy. The combined results of this evaluation provide the user community with an independent assessment of these sensors' absolute calibration values.

20 CFR 325.2 - Procedure for registering for unemployment benefits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Procedure for registering for unemployment... UNEMPLOYMENT INSURANCE ACT REGISTRATION FOR RAILROAD UNEMPLOYMENT BENEFITS § 325.2 Procedure for registering for unemployment benefits. (a) Registering as unemployed. To claim unemployment benefits for any day...

20 CFR 325.2 - Procedure for registering for unemployment benefits.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Procedure for registering for unemployment... UNEMPLOYMENT INSURANCE ACT REGISTRATION FOR RAILROAD UNEMPLOYMENT BENEFITS § 325.2 Procedure for registering for unemployment benefits. (a) Registering as unemployed. To claim unemployment benefits for any day...

20 CFR 325.2 - Procedure for registering for unemployment benefits.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Procedure for registering for unemployment... UNEMPLOYMENT INSURANCE ACT REGISTRATION FOR RAILROAD UNEMPLOYMENT BENEFITS § 325.2 Procedure for registering for unemployment benefits. (a) Registering as unemployed. To claim unemployment benefits for any day...

20 CFR 325.2 - Procedure for registering for unemployment benefits.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Procedure for registering for unemployment... UNEMPLOYMENT INSURANCE ACT REGISTRATION FOR RAILROAD UNEMPLOYMENT BENEFITS § 325.2 Procedure for registering for unemployment benefits. (a) Registering as unemployed. To claim unemployment benefits for any day...

20 CFR 325.2 - Procedure for registering for unemployment benefits.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Procedure for registering for unemployment... UNEMPLOYMENT INSURANCE ACT REGISTRATION FOR RAILROAD UNEMPLOYMENT BENEFITS § 325.2 Procedure for registering for unemployment benefits. (a) Registering as unemployed. To claim unemployment benefits for any day...

40 CFR 168.69 - Registered export pesticide products.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Registered export pesticide products. 168.69 Section 168.69 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE... Pesticides § 168.69 Registered export pesticide products. (a) Each export pesticide product that is...

40 CFR 168.69 - Registered export pesticide products.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Registered export pesticide products. 168.69 Section 168.69 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE... Pesticides § 168.69 Registered export pesticide products. (a) Each export pesticide product that is...

49 CFR Appendix B - Form Federal Register Notice

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 8 2011-10-01 2011-10-01 false Form Federal Register Notice B APPENDIX B Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT.... Pt. 1155, App. B APPENDIX B—Form Federal Register Notice Docket No. FD ____ (Sub-No. ____) Notice of...

17 CFR 5.22 - Registered futures association membership.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Registered futures association membership. 5.22 Section 5.22 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFF-EXCHANGE FOREIGN CURRENCY TRANSACTIONS § 5.22 Registered futures association membership. (a) Each person...

Appraisal Requirements for CMMI (Registered Trademark) Version 1.3 (ARC, V1.3)

DTIC Science & Technology

2011-04-01

Software Engineering Institute) • Rassa, Robert C . (Raytheon Space and Airborne Systems ) • Richter, Karen (OSD/IDA) • Young, Rusty (Software...CMU/SEI-2011-TR-006 | 21 • Penn, Lynn (Lockheed Martin) • Rassa, Robert C . (Raytheon Space and Airborne Systems) • Wilson, Harold G. (Northrop...Government Contract Number FA8721-05- C -0003 with Carnegie Mellon University for the operation of the Software Engineering Institute, a federally funded

Integration of NASA-Developed Lifing Technology for PM Alloys into DARWIN (registered trademark)

NASA Technical Reports Server (NTRS)

McClung, R. Craig; Enright, Michael P.; Liang, Wuwei

2011-01-01

In recent years, Southwest Research Institute (SwRI) and NASA Glenn Research Center (GRC) have worked independently on the development of probabilistic life prediction methods for materials used in gas turbine engine rotors. The two organizations have addressed different but complementary technical challenges. This report summarizes a brief investigation into the current status of the relevant technology at SwRI and GRC with a view towards a future integration of methods and models developed by GRC for probabilistic lifing of powder metallurgy (P/M) nickel turbine rotor alloys into the DARWIN (Darwin Corporation) software developed by SwRI.

The Instrumented Frisbee(Registered TradeMark) as a Prototype for Planetary Entry Probes

NASA Technical Reports Server (NTRS)

Lorenz, Ralph D.

2005-01-01

A Frisbee has been equipped with sensors, batteries and micro-controllers for data acquisition to record its translational accelerations and attitude motion. The experiments explore the capabilities and limitations of sensors on a rapidly-rotating platform moving in air, and illustrate several of the complex gyrodynamic aspects of frisbee flight. The experiments constitute an instructive exercise in aerospace vehicle systems integration and in attitude reconstruction.

1 CFR 2.2 - Administrative Committee of the Federal Register.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Register. 2.2 Section 2.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER GENERAL GENERAL INFORMATION § 2.2 Administrative Committee of the Federal Register. (a) The Administrative... Committee consists of— (1) The Archivist, or Acting Archivist, of the United States, who is the Chairman; (2...

45 CFR 1602.4 - Records published in the Federal Register.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Records published in the Federal Register. 1602.4 Section 1602.4 Public Welfare Regulations Relating to Public Welfare (Continued) LEGAL SERVICES... published in the Federal Register. The Corporation routinely publishes in the Federal Register information...

Voice Register in Mon: Acoustics and Electroglottography

PubMed Central

Abramson, Arthur S.; Tiede, Mark K.; Luangthongkum, Theraphan

2016-01-01

Mon is spoken in villages in Thailand and Myanmar. The dialect of Ban Nakhonchum, Thailand has two voice registers, modal and breathy; these phonation types, along with other phonetic properties, distinguish minimal pairs. Four native speakers of this dialect recorded repetitions of 14 randomized words (seven minimal pairs) for acoustic analysis. We used a subset of these pairs in a listening test to verify the perceptual robustness of the register distinction. Acoustic analysis found significant differences in noise component, spectral slope, and fundamental frequency. In a subsequent session four speakers were also recorded using electroglottography (EGG), which showed systematic differences in the contact quotient (CQ). The salience of these properties in maintaining the register distinction is discussed in the context of possible tonogenesis for this language. PMID:26636544

Development of a web-based register for the Dutch national study on biologicals in JIA: www.ABC-register.nl.

PubMed

Prince, F H M; Ferket, I S; Kamphuis, S; Armbrust, W; Ten Cate, R; Hoppenreijs, E P A H; Koopman-Keemink, Y; van Rossum, M A J; van Santen-Hoeufft, M; Twilt, M; van Suijlekom-Smit, L W A

2008-09-01

Most clinical studies use paper case record forms (CRFs) to collect data. In the Dutch multi-centre observational study on biologicals we encountered several disadvantages of using the paper CRFs. These are delay in data collection, lack of overview in collected data and difficulties in obtaining up-to-date interim reports. Therefore, we wanted to create a more effective method of data collection compared with CRFs on paper in a multi-centre study. We designed a web-based register with the intention to make it easy to use for participating physicians and at the same time accurate and up-to-date. Security demands were taken into account to secure the safety of the patient data. The web-based register was tested with data from 161 juvenile idiopathic arthritis patients from nine different centres. Internal validity was obtained and user-friendliness guaranteed. To secure the completeness of the data automatically generated e-mail alerts were implemented into the web-based register. More transparency of data was achieved by including the option to automatically generate interim reports of data in the web-based register. The safety was tested and approved. By digitalizing the CRF we achieved our aim to provide easy, rapid and safe access to the database and contributed to a new way of data collection. Although the web-based register was designed for the current multi-centre observational study, this type of instrument can also be applied to other types of studies. We expect that especially collaborative study groups will find it an efficient tool to collect data.

Laboratory Diagnosis of Lassa Fever

DTIC Science & Technology

2017-01-30

this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/ go ...reader_download. For more assistance with Adobe Reader visit http://www.adobe.com/ go /acrreader. Windows is either a registered trademark or a