Obesity decreases serum selenium levels in DMBA-induced mammary tumor using Obese Zucker Rat Model

USDA-ARS?s Scientific Manuscript database

Recently, we reported that obese Zucker rats had increased susceptibility to DMBA-induced mammary tumors compared to lean Zucker rats. Several studies suggest that lower serum selenium may play an important role in increasing the risk of several types of cancers (e.g, colon, breast and prostate canc...

Effects of Lactobacillus paracasei CNCM I-4034, Bifidobacterium breve CNCM I-4035 and Lactobacillus rhamnosus CNCM I-4036 on hepatic steatosis in Zucker rats.

PubMed

Plaza-Diaz, Julio; Gomez-Llorente, Carolina; Abadia-Molina, Francisco; Saez-Lara, Maria Jose; Campaña-Martin, Laura; Muñoz-Quezada, Sergio; Romero, Fernando; Gil, Angel; Fontana, Luis

2014-01-01

We have previously described the safety and immunomodulatory effects of Lactobacillus paracasei CNCM I-4034, Bifidobacterium breve CNCM I-4035 and Lactobacillus rhamnosus CNCM I-4036 in healthy volunteers. The scope of this work was to evaluate the effects of these probiotic strains on the hepatic steatosis of obese rats. We used the Zucker rat as a genetic model of obesity. Zucker-Lepr(fa/fa) rats received one of three probiotic strains, a mixture of L. paracasei CNCM I-4034 and B. breve CNCM I-4035, or a placebo for 30 days. An additional group of Zucker-lean+/fa rats received a placebo for 30 days. No alterations in intestinal histology, in the epithelial, lamina propria, muscular layers of the ileal or colonic mucosa, or the submucosae, were observed in any of the experimental groups. Triacylglycerol content decreased in the liver of Zucker-Lepr(fa/fa) rats that were fed L. rhamnosus, B. breve, or the mixture of B. breve and L. paracasei. Likewise, the area corresponding to neutral lipids was significantly smaller in the liver of all four groups of Zucker-Lepr(fa/fa) rats that received probiotics than in rats fed the placebo. Zucker-Lepr(fa/fa) rats exhibited significantly greater serum LPS levels than Zucker-lean+/fa rats upon administration of placebo for 30 days. In contrast, all four groups of obese Zucker-Lepr(fa/fa) rats that received LAB strains exhibited serum LPS concentrations similar to those of Zucker-lean+/fa rats. Serum TNF-α levels decreased in the Zucker-Lepr(fa/fa) rats that received B. breve, L. rhamnosus, or the mixture, whereas L. paracasei feeding decreased IL-6 levels in the serum of Zucker-Lepr(fa/fa) rats. In conclusion, the probiotic strains reduced hepatic steatosis in part by lowering serum LPS, and had an anti-inflammatory effect in obese Zucker rats.

Evaluation of Visceral Adipose Tissue Oxygenation by Blood Oxygen Level-Dependent MRI in Zucker Diabetic Fatty Rats.

PubMed

Shi, Hong-Jian; Li, Yan-Feng; Ji, Wen-Jie; Lin, Zhi-Chun; Cai, Wei; Chen, Tao; Yuan, Bin; Niu, Xiu-Long; Li, Han-Ying; Shu, Wen; Li, Yu-Ming; Yuan, Fei; Zhou, Xin; Zhang, Zhuoli

2018-06-01

This study aimed to investigate the feasibility of blood oxygen level-dependent magnetic resonance imaging (BOLD-MRI) to evaluate visceral adipose tissue (VAT) oxygenation in Zucker diabetic fatty (ZDF) rats and its associations with systemic metaflammation. Five-week-old ZDF rats and Zucker lean (ZL) rats were fed a high-fat diet (HFD) for 18 weeks. A baseline BOLD-MRI scan of perirenal adipose tissue was performed after 8 weeks of HFD feeding, and then the rats were randomized to receive pioglitazone or a vehicle for the following 10 weeks. At sacrifice, BOLD-MRI scan, Hypoxyprobe-1 injection, and circulating T helper 17 (Th17), regulatory T (Treg) cells, and monocyte subtype flow cytometry analysis were performed. HFD feeding led to a significant increase in VAT BOLD-MRI R2* signals (20.14 ± 0.23 per second vs. 21.53 ± 0.20 per second; P = 0.012), an indicator for decreased oxygenation. R2* signal was significantly correlated with VAT pimonidazole adduct-positive area, insulin resistance, Th17 and Treg cells, CD43 + and CD43+ + monocyte subtypes, and VAT macrophage infiltration. Pioglitazone treatment improved the insulin resistance and was associated with a delayed progression of VAT oxygenation. This work demonstrated the feasibility of BOLD-MRI for detecting the VAT oxygenation status in ZDF rats, and the BOLD-MRI signals were associated with insulin resistance and systemic metaflammation in ZDF rats during the development of obesity. © 2018 The Obesity Society.

Peroxisomal palmitoyl-CoA oxidation in the Zucker rat.

PubMed Central

Brady, P S; Hoppel, C L

1983-01-01

The effects of 3 or 6 days of starvation on hepatic peroxisomal palmitoyl-CoA oxidation were examined in adult lean and obese Zucker rats. When expressed either per mg of DNA or per total liver, obese rats had almost 2-fold higher oxidation rates than the lean rats. Within 6 days of starvation rates fell by 50% among both phenotypes. When data were expressed per 100 g body wt., lean and obese rats had similar rates, falling from a mean of 0.57 to 0.28 mumol/min per 100 g body wt. within 6 days of starvation. Peroxisomal oxidative changes paralleled mitochondrial beta-oxidative changes. PMID:6882399

Analysis of the "endocannabinoidome" in peripheral tissues of obese Zucker rats.

PubMed

Iannotti, F A; Piscitelli, F; Martella, A; Mazzarella, E; Allarà, M; Palmieri, V; Parrella, C; Capasso, R; Di Marzo, V

2013-08-01

The endocannabinoid system (ECS) represents one of the major determinants of metabolic disorders. We investigated potential changes in the endogenous levels of anandamide (AEA), 2-arachidonoylglycerol (2-AG), N-oleoylethanolamine (OEA) and N-palmitoylethanolamine (PEA) in some peripheral organs and tissues of obese Zucker(fa/fa) and lean Zucker(fa/+) rats by qPCR, liquid chromatography mass spectrometry, western blot and enzymatic activity assays. At 10-12 weeks of age AEA levels were significantly lower in BAT, small intestine and heart and higher in soleus of Zucker(fa/fa) rats. In this tissue, also the expression of CB1 receptors was higher. By contrast in Zucker(fa/fa) rats, 2-AG levels were changed (and lower) solely in the small and large intestine. Finally, in Zucker(fa/fa), PEA levels were unchanged, whereas OEA was slightly lower in BAT, and higher in the large intestine. Interestingly, these differences were accompanied by differential alterations of the genes regulating ECS tone. In conclusion, the levels of endocannabinoids are altered during obesity in a way partly correlating with changes of the genes related to their metabolism and activity. Copyright © 2013 Elsevier Ltd. All rights reserved.

Tesaglitazar, a dual PPAR{alpha}/{gamma} agonist, ameliorates glucose and lipid intolerance in obese Zucker rats.

PubMed

Oakes, Nicholas D; Thalén, Pia; Hultstrand, Therese; Jacinto, Severina; Camejo, Germán; Wallin, Boel; Ljung, Bengt

2005-10-01

Insulin resistance, impaired glucose tolerance, high circulating levels of free fatty acids (FFA), and postprandial hyperlipidemia are associated with the metabolic syndrome, which has been linked to increased risk of cardiovascular disease. We studied the metabolic responses to an oral glucose/triglyceride (TG) (1.7/2.0 g/kg lean body mass) load in three groups of conscious 7-h fasted Zucker rats: lean healthy controls, obese insulin-resistant/dyslipidemic controls, and obese rats treated with the dual peroxisome proliferator-activated receptor alpha/gamma agonist, tesaglitazar, 3 mumol.kg(-1).day(-1) for 4 wk. Untreated obese Zucker rats displayed marked insulin resistance, as well as glucose and lipid intolerance in response to the glucose/TG load. The 2-h postload area under the curve values were greater for glucose (+19%), insulin (+849%), FFA (+53%), and TG (+413%) compared with untreated lean controls. Treatment with tesaglitazar lowered fasting plasma glucose, improved glucose tolerance, substantially reduced fasting and postload insulin levels, and markedly lowered fasting TG and improved lipid tolerance. Fasting FFA were not affected, but postprandial FFA suppression was restored to levels seen in lean controls. Mechanisms of tesaglitazar-induced lowering of plasma TG were studied separately using the Triton WR1339 method. In anesthetized, 5-h fasted, obese Zucker rats, tesaglitazar reduced hepatic TG secretion by 47%, increased plasma TG clearance by 490%, and reduced very low-density lipoprotein (VLDL) apolipoprotein CIII content by 86%, compared with obese controls. In conclusion, the glucose/lipid tolerance test in obese Zucker rats appears to be a useful model of the metabolic syndrome that can be used to evaluate therapeutic effects on impaired postprandial glucose and lipid metabolism. The present work demonstrates that tesaglitazar ameliorates these abnormalities and enhances insulin sensitivity in this animal model.

Changes in UCP expression in tissues of Zucker rats fed diets with different protein content.

PubMed

Masanés, R M; Yubero, P; Rafecas, I; Remesar, X

2002-09-01

The effect of dietary protein content on the uncoupling proteins (UCP) 1, 2 and 3 expression in a number of tissues of Zucker lean and obese rats was studied. Thirty-day-old male Zucker lean (Fa/?) and obese (fa/fa) rats were fed on hyperproteic (HP, 30% protein), standard (RD, 17% protein) or hypoproteic (LP, 9% protein) diets ad libitum for 30 days. Although dietary protein intake affected the weights of individual muscles in lean and obese animals, these weights were similar. In contrast, huge differences were observed in brown adipose tissue (BAT) and liver weights. Lean rats fed on the LP diet generally increased UCP expression, whereas the HP group had lower values. Obese animals, HP and LP groups showed higher UCP expression in muscles, with slight differences in BAT and lower values for UCP3 in subcutaneous adipose tissue. The mean values of UCP expression in BAT of obese rats were lower than in their lean counterpart, whereas the expression in skeletal muscle was increased. Thus, expression of UCPs can be modified by dietary protein content, in lean and obese rats. A possible thermogenic function of UCP3 in muscle and WAT in obese rats must be taken into account.

Effect of a soluble cocoa fiber-enriched diet in Zucker fatty rats.

PubMed

Sánchez, David; Moulay, Leila; Muguerza, Begoña; Quiñones, Mar; Miguel, Marta; Aleixandre, Amaya

2010-06-01

The effects of a soluble cocoa fiber (SCF) were studied in Zucker fatty rats. Two groups of Zucker fatty rats were fed the following diets: standard diet and 5% SCF-enriched diet. A group of Zucker lean rats fed the standard diet was used for results comparison with obese Zucker animals. Solid and liquid intakes, body weight, plasma glucose, lipid profile, and systolic (SBP) and diastolic (DBP) blood pressure were recorded weekly. At the end of the experimental period insulin was determined, and fat apparent digestibility (FAD) and insulin resistance were calculated. The Zucker fatty rats fed 5% SCF-enriched diet showed less weight gain and food intake than those fed the standard diet. The group fed the fiber-enriched diet showed lower values of the total cholesterol/high-density lipoprotein cholesterol ratio and triglyceride levels than the standard group. FAD was also lower in the fiber group. Both SBP and DBP were decreased. In addition, SCF reduced plasma glucose and insulin, and as a consequence the insulin resistance was also decreased. Our data demonstrate that SCF resulted in an improvement of the studied risk factors associated with cardiometabolic disorders.

Deposition of dietary fatty acids in young Zucker rats fed a cafeteria diet.

PubMed

Rafecas, I; Esteve, M; Fernández-López, J A; Remesar, X; Alemany, M

1992-10-01

The content and accretion of fatty acids in 30, 45 and 60-day-old Zucker lean Fa/? and obese fa/fa rats fed either reference chow or a cafeteria diet has been studied, together with their actual fatty acid intake during each period. Diet had little overall effect on the pattern of deposition of fatty acids, but quantitatively the deposition of fat was much higher in cafeteria-fed rats. The fat-rich cafeteria diet allowed the direct incorporation of most fatty acids into the rat lipids, whilst chow feeding activated lipogenesis and the deposition of a shorter chain and more saturated pattern of fatty acids. Genetic, obesity induced a significant expansion of net lipogenesis when compared with lean controls. Cafeteria-fed obese rats accrued a high proportion of fatty acids, which was close to that ingested, but nevertheless showed a net de novo synthesis of fatty acids. It is postulated that the combined effects of genetic obesity and a fat-rich diet result in high rates of fat accretion with limited net lipogenesis. Lean Zucker rats show a progressive impairment of their delta 5-desaturase system, a situation also observed in obese rats fed a reference diet. In Zucker obese rats, cafeteria feeding resulted in an alteration of the conversion of C18:2 into C20:3. The cafeteria diet fully compensated for these drawbacks by supplying very high amounts of polyunsaturated fatty acids.

Endothelin antagonism improves hepatic insulin sensitivity associated with insulin signaling in Zucker fatty rats.

PubMed

Berthiaume, Nathalie; Carlson, Christian J; Rondinone, Cristina M; Zinker, Bradley A

2005-11-01

In the present study, we investigated the effects of long-term treatment with the endothelin (ET) antagonist atrasentan, an ET(A)-selective antagonist, on whole body glucose metabolism and insulin signaling in a commonly used model of insulin resistance, the Zucker fatty rat. Zucker lean and fatty rats were maintained for 6 weeks on either control or atrasentan-treated water. Euglycemic-hyperinsulinemic clamps (4 mU/kg per minute) were performed at the end of the 6-week treatment on a subset of rats (n=10/treatment). In another subset (n=5/treatment), an insulin tolerance test was performed; liver and muscle tissues were harvested 10 minutes following the challenge for further analysis. Results of the clamps demonstrated that long-term atrasentan treatment significantly increased whole body glucose metabolism in fatty rats compared with vehicle control subjects. Insulin-induced insulin receptor substrate 1 tyrosine and protein kinase B serine phosphorylation were significantly reduced in the liver and muscle of fatty animals compared with their lean littermates. This reduction was overcome with atrasentan treatment in the liver but not in the muscle. There was no difference between lean and fatty animals, however, in insulin receptor substrate 1 and protein kinase B protein expression in the liver and muscle and no effect by atrasentan. In contrast, expression of the regulatory subunit of PI-3 kinase (p85alpha) was significantly increased in the liver but not in the muscle of fatty animals compared with their lean littermates and this was normalized to levels of lean animals with atrasentan treatment. These findings indicate that long-standing ET antagonism improves whole body glucose metabolism in Zucker fatty rats through improvements in insulin signaling in the liver. These results indicate that therapeutic ET antagonism may assist in correcting the insulin-resistant state.

Transgenic animal model for studying the mechanism of obesity-associated stress urinary incontinence.

PubMed

Wang, Lin; Lin, Guiting; Lee, Yung-Chin; Reed-Maldonado, Amanda B; Sanford, Melissa T; Wang, Guifang; Li, Huixi; Banie, Lia; Xin, Zhengcheng; Lue, Tom F

2017-02-01

To study and compare the function and structure of the urethral sphincter in female Zucker lean (ZL) and Zucker fatty (ZF) rats and to assess the viability of ZF fats as a model for female obesity-associated stress urinary incontinence (SUI). Two study arms were created: a ZL arm including 16-week-old female ZL rats (ZUC-Lepr fa 186; n = 12) and a ZF arm including 16-week-old female ZF rats (ZUC-Lepr fa 185; n = 12). I.p. insulin tolerance testing was carried out before functional study. Metabolic cages, conscious cystometry and leak point pressure (LPP) assessments were conducted. Urethral tissues were harvested for immunofluorescence staining to check intramyocellular lipid (IMCL) and sphincter muscle (smooth muscle and striated muscle) composition. The ZF rats had insulin resistance, a greater voiding frequency and lower LPP compared with ZL rats (P < 0.05), with more IMCL deposition localized in the urethral striated muscle fibres of the ZF rats (P < 0.05). The thickness of the striated muscle layer and the ratio of striated muscle to smooth muscle were lower in ZF than in ZL rats. Obesity impairs urethral sphincter function via IMCL deposition and leads to atrophy and distortion of urethral striated muscle. The ZF rats could be a consistent and reliable animal model in which to study obesity-associated SUI. © 2016 The Authors BJU International © 2016 BJU International Published by John Wiley & Sons Ltd.

Insulin-induced generation of reactive oxygen species and uncoupling of nitric oxide synthase underlie the cerebrovascular insulin resistance in obese rats

PubMed Central

Katakam, Prasad V G; Snipes, James A; Steed, Mesia M; Busija, David W

2012-01-01

Hyperinsulinemia accompanying insulin resistance (IR) is an independent risk factor for stroke. The objective is to examine the cerebrovascular actions of insulin in Zucker obese (ZO) rats with IR and Zucker lean (ZL) control rats. Diameter measurements of cerebral arteries showed diminished insulin-induced vasodilation in ZO compared with ZL. Endothelial denudation revealed vasoconstriction to insulin that was greater in ZO compared with ZL. Nonspecific inhibition of nitric oxide synthase (NOS) paradoxically improved vasodilation in ZO. Scavenging of reactive oxygen species (ROS), supplementation of tetrahydrobiopterin (BH4) precursor, and inhibition of neuronal NOS or NADPH oxidase or cyclooxygenase (COX) improved insulin-induced vasodilation in ZO. Immunoblot experiments revealed that insulin-induced phosphorylation of Akt, endothelial NOS, and expression of GTP cyclohydrolase-I (GTP-CH) were diminished, but phosphorylation of PKC and ERK was enhanced in ZO arteries. Fluorescence studies showed increased ROS in ZO arteries in response to insulin that was sensitive to NOS inhibition and BH4 supplementation. Thus, a vicious cycle of abnormal insulin-induced ROS generation instigating NOS uncoupling leading to further ROS production underlies the cerebrovascular IR in ZO rats. In addition, decreased bioavailability and impaired synthesis of BH4 by GTP-CH induced by insulin promoted NOS uncoupling. PMID:22234336

Novel effects of the cannabinoid inverse agonist AM 251 on parameters related to metabolic syndrome in obese Zucker rats.

PubMed

Merroun, Ikram; Sánchez-González, Cristina; Martínez, Rosario; López-Chaves, Carlos; Porres, Jesús M; Aranda, Pilar; Llopis, Juan; Galisteo, Milagros; Zarzuelo, Antonio; Errami, Mohammed; López-Jurado, María

2013-11-01

Recent research suggests that cannabinoid receptor CB1 antagonists can affect appetite and body weight gain, although their influence on other parameters related to metabolic syndrome is not well documented. The present study was designed to assess the effects of chronic treatment with the CB1 receptor inverse agonist AM 251 (3 mg/kg for 3 weeks) in obese and lean Zucker rats on parameters related to metabolic syndrome. Four groups of rats were used: lean Zucker rats, untreated obese Zucker rats, AM 251-treated obese Zucker rats and a pair-fed obese Zucker rat experimental group which received the same amount of food as that consumed by the animals treated with AM251. Food intake, body weight gain, energy expenditure, plasma biochemical parameters, leptin, insulin and hepatic status markers were analysed. Daily injection of AM 251 in obese Zucker rats produced a marked and sustained decrease in daily food intake and body weight and a considerable increase in energy expenditure in comparison with untreated obese Zucker rats. AM 251 administration to obese rats significantly reduced plasma levels of glucose, leptin, AST, ALT, Gamma GT, total bilirubin and LDL cholesterol whereas HDL cholesterol plasma levels increased. The results also showed a decrease in liver/weight body ratio and total fat content in the liver. The main effects of AM251 (3 mg/kg) found in this study were not observed in pair-fed obese animals, highlighting the additional beneficial effects of treatment with AM 251. The results obtained in obese rats can be interpreted as a decrease in leptin and insulin resistance, thereby improving glucose and lipid metabolism, alleviating the steatosis present in the metabolic syndrome and thus favourably modifying plasma levels of hepatic biomarkers. Our results indicate that the cannabinoid CB1 inverse agonist AM 251 represents a promising therapeutic strategy for the treatment of obesity and metabolic syndrome. © 2013.

LKB1-AMPK signaling in muscle from obese insulin-resistant Zucker rats and effects of training.

PubMed

Sriwijitkamol, Apiradee; Ivy, John L; Christ-Roberts, Christine; DeFronzo, Ralph A; Mandarino, Lawrence J; Musi, Nicolas

2006-05-01

AMPK is a key regulator of fat and carbohydrate metabolism. It has been postulated that defects in AMPK signaling could be responsible for some of the metabolic abnormalities of type 2 diabetes. In this study, we examined whether insulin-resistant obese Zucker rats have abnormalities in the AMPK pathway. We compared AMPK and ACC phosphorylation and the protein content of the upstream AMPK kinase LKB1 and the AMPK-regulated transcriptional coactivator PPARgamma coactivator-1 (PGC-1) in gastrocnemius of sedentary obese Zucker rats and sedentary lean Zucker rats. We also examined whether 7 wk of exercise training on a treadmill reversed abnormalities in the AMPK pathway in obese Zucker rats. In the obese rats, AMPK phosphorylation was reduced by 45% compared with lean rats. Protein expression of the AMPK kinase LKB1 was also reduced in the muscle from obese rats by 43%. In obese rats, phosphorylation of ACC and protein expression of PGC-1alpha, two AMPK-regulated proteins, tended to be reduced by 50 (P = 0.07) and 35% (P = 0.1), respectively. There were no differences in AMPKalpha1, -alpha2, -beta1, -beta2, and -gamma3 protein content between lean and obese rats. Training caused a 1.5-fold increase in AMPKalpha1 protein content in the obese rats, although there was no effect of training on AMPK phosphorylation and the other AMPK isoforms. Furthermore, training also significantly increased LKB1 and PGC-1alpha protein content 2.8- and 2.5-fold, respectively, in the obese rats. LKB1 protein strongly correlated with hexokinase II activity (r = 0.75, P = 0.001), citrate synthase activity (r = 0.54, P = 0.02), and PGC-1alpha protein content (r = 0.81, P < 0.001). In summary, obese insulin-resistant rodents have abnormalities in the LKB1-AMPK-PGC-1 pathway in muscle, and these abnormalities can be restored by training.

The expression of Apoc3 mRNA is regulated by HNF4α and COUP-TFII, but not acute retinoid treatments, in primary rat hepatocytes and hepatoma cells.

PubMed

Howell, Meredith; Li, Rui; Zhang, Rui; Li, Yang; Chen, Wei; Chen, Guoxun

2014-02-01

Vitamin A status regulates obesity development, hyperlipidemia, and hepatic lipogenic gene expression in Zucker fatty (ZF) rats. The development of hyperlipidemia in acne patients treated with retinoic acid (RA) has been attributed to the induction of apolipoprotein C-III expression. To understand the role of retinoids in the development of hyperlipidemia in ZF rats, the expression levels of several selected RA-responsive genes in the liver and isolated hepatocytes from Zucker lean (ZL) and ZF rats were compared using real-time PCR. The Rarb and Srebp-1c mRNA levels are higher in the liver and isolated hepatocytes from ZF than ZL rats. The Apoc3 mRNA level is only higher in the isolated hepatocytes from ZF than ZL rats. To determine whether dynamic RA production acutely regulates Apoc3 expression, its mRNA levels in response to retinoid treatments or adenovirus-mediated overexpression of hepatocyte nuclear factor 4 alpha (HNF4α) and chicken ovalbumin upstream-transcription factor II (COUP-TFII) were analyzed. Retinoid treatments for 2-6 h did not induce the expression of Apoc3 mRNA. The overexpression of HNF4α or COUP-TFII induced or inhibited Apoc3 expression, respectively. We conclude that short-term retinoid treatments could not induce Apoc3 mRNA expression, which is regulated by HNF4α and COUP-TFII in hepatocytes.

Effects of Alpha-Lipoic Acid on Oxidative Stress and Kinin Receptor Expression in Obese Zucker Diabetic Fatty Rats.

PubMed

Midaoui, Adil El; Talbot, Sébastien; Lahjouji, Karim; Dias, Jenny Pena; Fantus, I George; Couture, Réjean

2015-06-01

To investigate the impact of alpha-lipoic acid on superoxide anion production and NADPH oxidase activity as well as on the expression of kinin B1 and B2 receptors in key organs of obese Zucker Diabetic Fatty rats. Superoxide anion production was measured by lucigenin chemiluminescence. Kinin B1 and B2 receptors expression was measured at protein and mRNA levels by western blot and qRT-PCR in key organs of Zucker Diabetic Fatty and Zucker lean control rats treated for a period of 6 weeks with a standard diet or a diet containing the antioxidant α-lipoic acid (1 g/kg). Superoxide anion production and NADPH oxidase activity were significantly enhanced in aorta and adipose tissue of Zucker Diabetic Fatty rats. Kinin B1 and B2 receptors expression levels were also significantly increased in the liver and the gastrocnemius muscle of Zucker Diabetic Fatty rats. Expression of both receptors was not altered in the pancreas of Zucker Diabetic Fatty rats and was undetectable in white retroperitoneal adipose tissue. Alpha-lipoic acid prevented the rise in NADPH oxidase activity in aorta and epididymal adipose tissue of Zucker Diabetic Fatty rats and the upregulation of kinin B1 receptor in liver and gastrocnemius muscle and that of kinin B2 receptor in the liver. Alpha-lipoic acid treatment was found to prevent the final body weight increase without affecting significantly hyperglycemia, hyperinsulinemia and insulin resistance index in Zucker Diabetic Fatty rats. Findings support the hypothesis that oxidative stress is implicated in the induction of kinin B1 receptor in Zucker Diabetic Fatty rats. The ability of α-lipoic acid to blunt the body weight gain appears to be mediated in part by preventing NADPH oxidase activity rise in adipose tissue and reversing the hepatic upregulation of kinin B1 receptor in Zucker Diabetic Fatty rats.

Rimonabant reduces the essential value of food in the genetically obese Zucker rat: an exponential demand analysis.

PubMed

Rasmussen, Erin B; Reilly, William; Buckley, Jessica; Boomhower, Steven R

2012-02-01

Research on free-food intake suggests that cannabinoids are implicated in the regulation of feeding. Few studies, however, have characterized how environmental factors that affect food procurement interact with cannabinoid drugs that reduce food intake. Demand analysis provides a framework to understand how cannabinoid blockers, such as rimonabant, interact with effort in reducing demand for food. The present study examined the effects rimonabant had on demand for sucrose in obese Zucker rats when effort to obtain food varied and characterized the data using the exponential ("essential value") model of demand. Twenty-nine male (15 lean, 14 obese) Zucker rats lever-pressed under eight fixed ratio (FR) schedules of sucrose reinforcement, in which the number of lever-presses to gain access to a single sucrose pellet varied between 1 and 300. After behavior stabilized under each FR schedule, acute doses of rimonabant (1-10mg/kg) were administered prior to some sessions. The number of food reinforcers and responses in each condition was averaged and the exponential and linear demand equations were fit to the data. These demand equations quantify the value of a reinforcer by its sensitivity to price (FR) increases. Under vehicle conditions, obese Zucker rats consumed more sucrose pellets than leans at smaller fixed ratios; however, they were equally sensitive to price increases with both models of demand. Rimonabant dose-dependently reduced reinforcers and responses for lean and obese rats across all FR schedules. Data from the exponential analysis suggest that rimonabant dose-dependently increased elasticity, i.e., reduced the essential value of sucrose, a finding that is consistent with graphical depictions of normalized demand curves. Copyright © 2011 Elsevier Inc. All rights reserved.

Rimonabant's reductive effects on high densities of food reinforcement, but not palatability, in lean and obese Zucker rats.

PubMed

Buckley, Jessica L; Rasmussen, Erin B

2014-05-01

Cannabinoid antagonists purportedly have greater effects in reducing the intake of highly palatable food compared to less palatable food. However, this assertion is based on free-feeding studies in which the amount of palatable food eaten under baseline conditions is often confounded with other variables, such as unequal access to both food options and differences in qualitative features of the foods. We attempted to reduce these confounds by using a model of choice that programmed the delivery rates of sucrose and carrot-flavored pellets. Lever pressing of ten lean (Fa/Fa or Fa/fa) and ten obese (fa/fa) Zucker rats was placed under three conditions in which programmed ratios for food pellets on two levers were 5:1, 1:1, and 1:5. In phase 1, responses on the two levers produced one type of pellet (sucrose or carrot); in phase 2, responses on one lever produced sucrose pellets and on the other lever produced carrot pellets. After responses stabilized under each food ratio, acute doses of rimonabant (0, 3, and 10 mg/kg) were administered before experimental sessions. The number of reinforcers and responses earned per session under each ratio and from each lever was compared. Rimonabant reduced reinforcers in 1:5 and 5:1 food ratios in phase 1, and across all ratios in phase 2. Rimonabant reduced sucrose and carrot-flavored pellet consumption similarly; rimonabant did not affect bias toward sucrose, but increased sensitivity to amount differences in lean rats. This suggests that relative amount of food, not palatability, may be an important behavioral mechanism in the effects of rimonabant.

Submandibular Gland and Caries Susceptibility in the Obese Zucker Rat

PubMed Central

Mozaffari, Mahmood S.; Abdelsayed, Rafik; Zakhary, Ibrahim; El-Salanty, Mohammed; Liu, Jun Yao; Wimborne, Hereward; El-Marakby, Ahmed

2010-01-01

Background Obesity is a prevalent disorder characterized as marked insulin resistance and low grade inflammation. We tested the hypothesis that obesity upregulates inflammatory markers in the submandibular gland in association with derangements of its architecture and predisposition to caries in obese Zucker rats. We also examined the potential impact of chromium picolinate (Cr(Pic)3), a nutritional supplement suggested to improve glycemic control, on the aforementioned parameters. Design Male obese Zucker rats (OZR) were treated with diets lacking and containing 5 or 10 mg/kg chromium (as Cr(Pic)3) from 6 weeks to about 6 months of age; lean Zucker rats (LZR) served as controls. Thereafter, glycemic status, salivary tissue architecture and levels of several inflammatory markers were determined in association with caries susceptibility. Results OZR showed reduced insulin sensitivity, increased ratio of phospho-nuclear factor kappa B (NF-κB) to total NF-κB and increased intercellular adhesion molecule-1 level but similar histological features compared to LZR. Importantly, compared to LZR, OZR displayed rampant caries and a tendency for reduced dentin mineral density. Treatment of OZR with Cr(Pic)3 attenuated upregulation of these proinflammatory indicators in association with reduced severity of caries without improving insulin sensitivity. Conclusions Obesity promotes proinflammatory changes within the submandibular gland, without affecting glandular architecture, in association with rampant caries; Cr(Pic)3 treatment provided some protective effects. PMID:20973827

Development of insulin resistance and endothelin-1 levels in the Zucker fatty rat.

PubMed

Berthiaume, Nathalie; Mika, Amanda K; Zinker, Bradley A

2003-07-01

In order to determine the effects of increasing insulin resistance on endothelin-1 (ET-1) levels, Zucker lean and fatty rats were studied at basal and during a complete nutrient meal tolerance test (MTT) at 7, 12, and 15 weeks of age. The fatty rats were mildly hyperglycemic, severely hyperinsulinemic and glucose-intolerant at all ages versus lean animals and this progressed with age within groups, as previously published. Basal ET-1 levels, at 7 weeks, were significantly increased in fatty versus lean rats (3.2+/-0.5 v 2.0+/-0.3 pg/mL, respectively; P<.05); however, we did not observe any significant basal difference at 12 or 15 weeks. At 7 weeks, ET-1 levels between fatty and lean rats were not different during the MTT (15 minutes: 2.9+/-0.4 v 2.7+/-0.7; 120 minutes: 6.5+/-0.8 v 6.6+/-0.5 pg/mL, fatty v lean, respectively). At 12 weeks, though there was no difference in basal levels, fatty rats had higher ET-1 levels during the MTT compared to lean animals (15 minutes: 6.9+/-1.4 v 1.8+/-0.4; 120 minutes: 9.4+/-1.7 v 3.2+/-0.5 pg/mL, respectively; P<.01). At 15 weeks, ET-1 levels during the MTT receded to levels similar to those observed at 7 weeks, which were significantly higher in fatty versus lean rats 15 minutes following the challenge (3.4+/-0.4 v 2.4+/-0.2 pg/mL, respectively; P<.05). In conclusion, ET-1 levels in the Zucker fatty rat: (1) were increased in the early stages of the progression of insulin resistance at 7 weeks, but were unchanged under basal conditions with age thereafter, and (2) were increased under nutrient challenge conditions with advanced insulin resistance up to 12 weeks, and were still significantly but to a lesser degree increased at 15 weeks of age. The explanation for these results and their relationship to the observed insulin resistance is unclear and will require further investigation.

Differential Regulation of Cardiac Function and Intracardiac Cytokines by Rapamycin in Healthy and Diabetic Rats.

PubMed

Luck, Christian; DeMarco, Vincent G; Mahmood, Abuzar; Gavini, Madhavi P; Pulakat, Lakshmi

2017-01-01

Diabetes is comorbid with cardiovascular disease and impaired immunity. Rapamycin improves cardiac functions and extends lifespan by inhibiting the mechanistic target of rapamycin complex 1 (mTORC1). However, in diabetic murine models, Rapamycin elevates hyperglycemia and reduces longevity. Since Rapamycin is an immunosuppressant, we examined whether Rapamycin (750  μ g/kg/day) modulates intracardiac cytokines, which affect the cardiac immune response, and cardiac function in male lean (ZL) and diabetic obese Zucker (ZO) rats. Rapamycin suppressed levels of fasting triglycerides, insulin, and uric acid in ZO but increased glucose. Although Rapamycin improved multiple diastolic parameters ( E / E ', E '/ A ', E / Vp ) initially, these improvements were reversed or absent in ZO at the end of treatment, despite suppression of cardiac fibrosis and phosphoSer473Akt. Intracardiac cytokine protein profiling and Ingenuity® Pathway Analysis indicated suppression of intracardiac immune defense in ZO, in response to Rapamycin treatment in both ZO and ZL. Rapamycin increased fibrosis in ZL without increasing phosphoSer473Akt and differentially modulated anti-fibrotic IL-10, IFN γ , and GM-CSF in ZL and ZO. Therefore, fundamental difference in intracardiac host defense between diabetic ZO and healthy ZL, combined with differential regulation of intracardiac cytokines by Rapamycin in ZO and ZL hearts, underlies differential cardiac outcomes of Rapamycin treatment in health and diabetes.

Differential Regulation of Cardiac Function and Intracardiac Cytokines by Rapamycin in Healthy and Diabetic Rats

PubMed Central

Luck, Christian; DeMarco, Vincent G.; Mahmood, Abuzar; Gavini, Madhavi P.

2017-01-01

Diabetes is comorbid with cardiovascular disease and impaired immunity. Rapamycin improves cardiac functions and extends lifespan by inhibiting the mechanistic target of rapamycin complex 1 (mTORC1). However, in diabetic murine models, Rapamycin elevates hyperglycemia and reduces longevity. Since Rapamycin is an immunosuppressant, we examined whether Rapamycin (750 μg/kg/day) modulates intracardiac cytokines, which affect the cardiac immune response, and cardiac function in male lean (ZL) and diabetic obese Zucker (ZO) rats. Rapamycin suppressed levels of fasting triglycerides, insulin, and uric acid in ZO but increased glucose. Although Rapamycin improved multiple diastolic parameters (E/E′, E′/A′, E/Vp) initially, these improvements were reversed or absent in ZO at the end of treatment, despite suppression of cardiac fibrosis and phosphoSer473Akt. Intracardiac cytokine protein profiling and Ingenuity® Pathway Analysis indicated suppression of intracardiac immune defense in ZO, in response to Rapamycin treatment in both ZO and ZL. Rapamycin increased fibrosis in ZL without increasing phosphoSer473Akt and differentially modulated anti-fibrotic IL-10, IFNγ, and GM-CSF in ZL and ZO. Therefore, fundamental difference in intracardiac host defense between diabetic ZO and healthy ZL, combined with differential regulation of intracardiac cytokines by Rapamycin in ZO and ZL hearts, underlies differential cardiac outcomes of Rapamycin treatment in health and diabetes. PMID:28408970

Rimonabant’s Reductive Effects on High Densities of Food Reinforcement, but not Palatability, in Lean and Obese Zucker Rats

PubMed Central

Buckley, Jessica Lynn; Rasmussen, Erin B.

2014-01-01

Rationale Cannabinoid antagonists purportedly have greater effects in reducing the intake of highly palatable food compared to less palatable food. However, this assertion is based on free-feeding studies in which the amount of palatable food eaten under baseline conditions is often confounded with other variables, such as unequal access to both food options and differences in qualitative features of the foods. Objective We attempted to reduce these confounds by using a model of choice that programmed the delivery rates of sucrose and carrot-flavored pellets. Methods Lever-pressing of ten lean (Fa/Fa or Fa/fa) and ten obese (fa/fa) Zucker rats was placed under three conditions in which programmed ratios for food pellets on two levers were 5:1, 1:1, and 1:5. In Phase 1, responses on the two levers produced one type of pellet (sucrose or carrot); in Phase 2, responses on one lever produced sucrose pellets and on the other lever produced carrot pellets. After responses stabilized under each food ratio, acute doses of rimonabant (0, 3, and 10 mg/kg) were administered before experimental sessions. The number of reinforcers and responses earned per session under each ratio and from each lever was compared. Results and Conclusions Rimonabant reduced reinforcers in 1:5 and 5:1 food ratios in Phase 1, and across all ratios in Phase 2. Rimonabant reduced sucrose and carrot-flavored pellet consumption similarly; rimonabant did not affect bias toward sucrose, but increased sensitivity to amount differences in lean rats. This suggests that relative amount of food, not palatability, may be an important behavioral mechanism in the effects of rimonabant. PMID:24398820

Carnitine supplementation to obese Zucker rats prevents obesity-induced type II to type I muscle fiber transition and favors an oxidative phenotype of skeletal muscle

PubMed Central

2013-01-01

Background In the present study, we tested the hypothesis that carnitine supplementation counteracts obesity-induced muscle fiber transition from type I to type II. Methods 24 obese Zucker rats were randomly divided into two groups of 12 rats each (obese control, obese carnitine) and 12 lean Zucker rats were selected for lean control group. A control diet was given to both control groups and a carnitine supplemented diet (3 g/kg diet) was given to obese carnitine group for 4 wk. Components of the muscle fiber transformation in skeletal muscle were examined. Results The plasma level of carnitine were lower in the obese control group compared to the lean control group and higher in the obese carnitine group than in the other groups (P < 0.05). Plasma concentrations of triglycerides and non-esterified fatty acids were increased in obese animals compared to lean animals and the obese carnitine group had lower level compared to the obese control group (P < 0.05). The obese carnitine group had an increased number of type I muscle fibers and higher mRNA levels of type I fiber-specific myosin heavy chain, regulators of muscle fiber transition and of genes involved in carnitine uptake, fatty acid transport, β-oxidation, angiogenesis, tricarboxylic acid cycle and thermo genesis in M. rectus femoris compared to the other groups (P < 0.05). Conclusion The results demonstrate that carnitine supplementation to obese Zucker a rat counteracts the obesity-induced muscle fiber transition and restores the muscle oxidative metabolic phenotype. Carnitine supplementation is supposed to be beneficial for the treatment of elevated levels of plasma lipids during obesity or diabetes. PMID:23842456

Age-related decrease in sensitivity to glucagon and dibutyryl cyclic AMP inhibition of fatty acid synthesis in hepatocytes isolated from obese female Zucker rats.

PubMed

McCune, S A; Durant, P J; Harris, R A

1984-02-01

Hepatocytes were isolated from 3 and 5 month old female genetically obese Zucker rats and their lean littermate controls. An age-dependent loss in sensitivity of fatty acid synthesis to inhibition by both glucagon and dibutyryl cyclic AMP was observed with hepatocytes from the obese rats. Hepatocytes from lean animals were much more sensitive to these agents, regardless of age. Low concentrations of glucagon and dibutyryl cyclic AMP actually produced some stimulation of fatty acid synthesis with hepatocytes prepared from the older obese rats. 5-Tetradecyloxy-2-furoic acid, a compound which inhibits fatty acid synthesis, was a very effective inhibitor of fatty acid synthesis by hepatocytes isolated from all rats used in the study. An inhibition of lactate plus pyruvate accumulation and a strong stimulation of glycogenolysis occurred in response to both glucagon and dibutyryl cyclic AMP with hepatocytes from both age groups of lean and obese rats. The results suggest that with aging of the obese female Zucker rat some step of hepatic fatty acid synthesis becomes progressively less sensitive to inhibition by glucagon and dibutyryl cyclic AMP. This may play an important role in maintenance of obesity in these animals.

Long-term physical exercise and atrial natriuretic peptide in obese Zucker rats.

PubMed

Pörsti, Ilkka; Kähönen, Mika; Wu, Xiumin; Arvola, Pertti; Ruskoaho, Heikki

2002-07-01

Endurance training increases natriuretic peptide synthesis in the hypertrophied myocardium of spontaneously hypertensive rats. We examined the effects of 22-week-long treadmill exercise on plasma and tissue atrial natriuretic peptide in Zucker rats, a model of genetic obesity and moderate hypertension without clear cardiac hypertrophy. The blood pressures of the animals were measured by the tail-cuff method, and plasma and tissue samples for the peptide determinations were taken at the end of the study. The training increased heart weight to body weight ratio, while atrial natriuretic peptide contents in the right and left atrium, ventricular tissue, and plasma did not change. The exercise prevented the elevation of blood pressure, which was observed in non-exercised obese Zucker rats, and also reduced blood pressure in the lean rats. In conclusion, these results suggest that in the absence of preceding myocardial hypertrophy, the long-term exercise-induced workload is not deleterious to the heart in experimental obesity, since no changes in plasma and tissue atrial natriuretic peptide were detected.

IVGTT-based simple assessment of glucose tolerance in the Zucker fatty rat: Validation against minimal models.

PubMed

Morettini, Micaela; Faelli, Emanuela; Perasso, Luisa; Fioretti, Sandro; Burattini, Laura; Ruggeri, Piero; Di Nardo, Francesco

2017-01-01

For the assessment of glucose tolerance from IVGTT data in Zucker rat, minimal model methodology is reliable but time- and money-consuming. This study aimed to validate for the first time in Zucker rat, simple surrogate indexes of insulin sensitivity and secretion against the glucose-minimal-model insulin sensitivity index (SI) and against first- (Φ1) and second-phase (Φ2) β-cell responsiveness indexes provided by C-peptide minimal model. Validation of the surrogate insulin sensitivity index (ISI) and of two sets of coupled insulin-based indexes for insulin secretion, differing from the cut-off point between phases (FPIR3-SPIR3, t = 3 min and FPIR5-SPIR5, t = 5 min), was carried out in a population of ten Zucker fatty rats (ZFR) and ten Zucker lean rats (ZLR). Considering the whole rat population (ZLR+ZFR), ISI showed a significant strong correlation with SI (Spearman's correlation coefficient, r = 0.88; P<0.001). Both FPIR3 and FPIR5 showed a significant (P<0.001) strong correlation with Φ1 (r = 0.76 and r = 0.75, respectively). Both SPIR3 and SPIR5 showed a significant (P<0.001) strong correlation with Φ2 (r = 0.85 and r = 0.83, respectively). ISI is able to detect (P<0.001) the well-recognized reduction in insulin sensitivity in ZFRs, compared to ZLRs. The insulin-based indexes of insulin secretion are able to detect in ZFRs (P<0.001) the compensatory increase of first- and second-phase secretion, associated to the insulin-resistant state. The ability of the surrogate indexes in describing glucose tolerance in the ZFRs was confirmed by the Disposition Index analysis. The model-based validation performed in the present study supports the utilization of low-cost, insulin-based indexes for the assessment of glucose tolerance in Zucker rat, reliable animal model of human metabolic syndrome.

Estrogen has opposing effects on vascular reactivity in obese, insulin-resistant male Zucker rats

NASA Technical Reports Server (NTRS)

Brooks-Asplund, Esther M.; Shoukas, Artin A.; Kim, Soon-Yul; Burke, Sean A.; Berkowitz, Dan E.

2002-01-01

We hypothesized that estradiol treatment would improve vascular dysfunction commonly associated with obesity, hyperlipidemia, and insulin resistance. A sham operation or 17beta-estradiol pellet implantation was performed in male lean and obese Zucker rats. Maximal vasoconstriction (VC) to phenylephrine (PE) and potassium chloride was exaggerated in control obese rats compared with lean rats, but estradiol significantly attenuated VC in the obese rats. Estradiol reduced the PE EC50 in all groups. This effect was cyclooxygenase independent, because preincubation with indomethacin reduced VC response to PE similarly in a subset of control and estrogen-treated lean rats. Endothelium-independent vasodilation (VD) to sodium nitroprusside was similar among groups, but endothelium-dependent VD to ACh was significantly impaired in obese compared with lean rats. Estradiol improved VD in lean and obese rats by decreasing EC50 but impaired function by decreasing maximal VD. The shift in EC50 corresponded to an upregulation in nitric oxide synthase III protein expression in the aorta of the estrogen-treated obese rats. In summary, estrogen treatment improves vascular function in male insulin-resistant, obese rats, partially via an upregulation of nitric oxide synthase III protein expression. These effects are counteracted by adverse factors, such as hyperlipidemia and, potentially, a release of an endothelium-derived contractile agent.

α-Motoneurons maintain biophysical heterogeneity in obesity and diabetes in Zucker rats.

PubMed

MacDonell, Christopher W; Chopek, Jeremy W; Gardiner, Kalan R; Gardiner, Phillip F

2017-10-01

Small-diameter sensory dysfunction resulting from diabetes has received much attention in the literature, whereas the impact of diabetes on α-motoneurons (MN) has not. In addition, the chance of developing insulin resistance and diabetes is increased in obesity. No study has examined the impact of obesity or diabetes on the biophysical properties of MN. Lean Zucker rats and Zucker diabetic fatty (ZDF) rats were separated into lean, obese (ZDF fed standard chow), and diabetic (ZDF fed high-fat diet that led to diabetes) groups. Glass micropipettes recorded hindlimb MN properties from identified flexor and extensor MN. MN were separated within their groups on the basis of input conductance, which created high- and low-input conductance subpopulations for each. A significant shorter (20%) afterhyperpolarization half-decay (AHP 1/2 ) was found in low-conductance MN for the diabetic group only, whereas AHP½ tended to be shorter in the obese group (19%). Significant positive correlations were found among rheobase and input conductance for both lean and obese animals. No differences were found between the groups for afterhyperpolarization amplitude (AHP amp ), input conductance, rheobase, or any of the rhythmic firing properties (frequency-current slope and spike-frequency adaptation index). MN properties continue to be heterogeneous in obese and diabetic animals. Obesity does not seem to influence lumbar MN. Despite the resistance of MN to the impact of diabetes, the reduced AHP 1/2 decay and the tendency for a reduction in AHP amp may be the first sign of change to MN function. NEW & NOTEWORTHY Knowledge about the impact of obesity and diabetes on the biophysical properties of motoneurons is lacking. We found that diabetes reduces the duration of the afterhyperpolarization and that motoneuron function is unchanged by obesity. A reduced afterhyperpolarization may impact discharge characteristics and may be the first sign of change to motoneuron function. Copyright �

Renal protection by a soy diet in obese Zucker rats is associated with restoration of nitric oxide generation.

PubMed

Trujillo, Joyce; Ramírez, Victoria; Pérez, Jazmín; Torre-Villalvazo, Ivan; Torres, Nimbe; Tovar, Armando R; Muñoz, Rosa M; Uribe, Norma; Gamba, Gerardo; Bobadilla, Norma A

2005-01-01

The obese Zucker rat is a valuable model for studying kidney disease associated with obesity and diabetes. Previous studies have shown that substitution of animal protein with soy ameliorates the progression of renal disease. To explore the participation of nitric oxide (NO) and caveolin-1 in this protective effect, we evaluated proteinuria, creatinine clearance, renal structural lesions, nitrites and nitrates urinary excretion (UNO(2)(-)/NO(3)V), and mRNA and protein levels of neuronal NO synthase (nNOS), endothelial NOS (eNOS), and caveolin-1 in lean and fatty Zucker rats fed with 20% casein or soy protein diet. After 160 days of feeding with casein, fatty Zucker rats developed renal insufficiency, progressive proteinuria, and renal structural lesions; these alterations were associated with an important fall of UNO(2)(-)/NO(3)V, changes in nNOS and eNOS mRNA levels, together with increased amount of eNOS and caveolin-1 present in plasma membrane proteins of the kidney. In fatty Zucker rats fed with soy, we observed that soy diet improved renal function, UNO(2)(-)/NO(3)V, and proteinuria and reduced glomerulosclerosis, tubular dilation, intersticial fibrosis, and extracapilar proliferation. Renal protection was associated with reduction of caveolin-1 and eNOS in renal plasma membrane proteins. In conclusion, our results suggest that renal protective effect of soy protein appears to be mediated by improvement of NO generation and pointed out to caveolin-1 overexpression as a potential pathophysiological mechanism in renal disease.

Immune function, mitogenicity, and angiogenic growth factor concentrations in lean and obese rodent sera: implications in obesity-related prostate tumor biology.

PubMed

Mydlo, J H; Gerstein, M I; Harris, C F; Braverman, A S

2003-01-01

Some studies suggest that several tumors have a greater incidence in those patients with a high fat diet, such as colon, breast, and prostate. However, we wanted to determine the effects of obesity alone, independent of diet, on the progression of prostate tumor growth. Using a genetic model of obese and lean Zucker rats, we wanted to demonstrate any sera differences in the concentration of basic fibroblast growth factor (FGF-2) and vascular endothelial cell growth factor (VEGF), two important factors involved in the growth and progression of prostate cancer. We also wanted to investigate if there were any differences in immune function between the two sera, which could also account for uninhibited tumor growth, as well as differences in mitogenic stimulation. Female Zucker rat obese and lean sera were analyzed using ELISA assays for FGF-2, VEGF, and macrophage inflammatory protein-1 alpha (MIP-1a), as a measure of macrophage function. In addition, the sera of lean and obese sera were plated on wells growing LNCaP prostate cancer cells to determine differences in mitogenicity. We found a greater concentration of FGF-2 in the sera from obese Zucker rats compared to lean Zucker rats: 6.32+/-0.56 vs 3.48+/-0.34 pg/ml, respectively, P<0.05). We also demonstrated a greater concentration of VEGF in obese rat sera compared to lean sera: 54.4+/-4.1 vs 38.0+/-2.9 pg/mL, respectively, P<0.05). We detected a trend in mitogenic stimulation among LNCaP cells along the higher concentrations of the dose-response curve (0.72+/-0.06 vs 0.51+/-0.5). However, this was not statistically significant. In addition, we did not find a significant difference in MIP-1a macrophage activity levels between sera. To conclude, we speculate that the greater concentrations of VEGF and FGF-2 in the sera of obese rodents vs lean rodents may account for some of the differences seen in obesity-related tumor growth seen in the human condition. However, the lack of any sera differences of immune function

The influence of sleep deprivation and obesity on DNA damage in female Zucker rats.

PubMed

Tenorio, Neuli M; Ribeiro, Daniel A; Alvarenga, Tathiana A; Fracalossi, Ana Carolina C; Carlin, Viviane; Hirotsu, Camila; Tufik, Sergio; Andersen, Monica L

2013-01-01

The aim of this study was to evaluate overall genetic damage induced by total sleep deprivation in obese, female Zucker rats of differing ages. Lean and obese Zucker rats at 3, 6, and 15 months old were randomly distributed into two groups for each age group: home-cage control and sleep-deprived (N = 5/group). The sleep-deprived groups were deprived sleep by gentle handling for 6 hours, whereas the home-cage control group was allowed to remain undisturbed in their home-cage. At the end of the sleep deprivation period, or after an equivalent amount of time for the home-cage control groups, the rats were brought to an adjacent room and decapitated. The blood, brain, and liver tissue were collected and stored individually to evaluate DNA damage. Significant genetic damage was observed only in 15-month-old rats. Genetic damage was present in the liver cells from sleep-deprived obese rats compared with lean rats in the same condition. Sleep deprivation was associated with genetic damage in brain cells regardless of obesity status. DNA damage was observed in the peripheral blood cells regardless of sleep condition or obesity status. Taken together, these results suggest that obesity was associated with genetic damage in liver cells, whereas sleep deprivation was associated with DNA damage in brain cells. These results also indicate that there is no synergistic effect of these noxious conditions on the overall level of genetic damage. In addition, the level of DNA damage was significantly higher in 15-month-old rats compared to younger rats.

Ciprofibrate, clofibric acid and respective glycinate derivatives. Effects of a four-week treatment on male lean and obese Zucker rats.

PubMed

Lupp, Amelie; Karge, Elke; Deufel, Thomas; Oelschlägers, Herbert; Fleck, Christian

2008-01-01

Fibrates are widely prescribed in hyperlpidemic patients to prevent atherosclerosis. Their therapeutic use, however, can be associated with adverse effects like gastrointestinal disorders, myalgia, myositis and hepatotoxicity. In rodents large doses can even cause hepatocellular carcinoma. Additionally, interactions with the biotransformation of other compounds at the cytochrome P450 (CYP) system have been observed. Thus, the discovery of new substances or derivatives with less side effects is of great interest. In the present study the influence of a four-week daily oral administration of 2 mg/kg body weight ciprofibrate (CAS 52214-84-3) or of 100 mg/kg body weight clofibric acid (CAS 882-09-7) was compared to that of the respective doses of their newly synthesized glycine conjugates in adult male lean and obese Zucker rats. Although obese rats displayed distinctly higher serum lipid concentrations, after fibrate treatment values were significantly lowered in lean animals only. Livers of obese rats were significantly enlarged, histologically showing a fine-droplet like fatty degeneration and an increase in glycogen content, but no signs of inflammation. After fibrate administration histologically a hypertrophy, an eosinophilia, a reduced glycogen content and also hepatocyteapoptosis were observed. Livers of obese rats displayed higher CYP1A1 andCYP2E1 expression, but lower immunostaining for CYP2B1 and CYP3A2. No differences between the two groups of rats were seen with respect to CYP4A1 expression. Due to fibrate treatment especially CYP2E1 and CYP4A1, but also CYP1A1, 2B1 and 3A2 were induced. Resulting CYP mediated monooxygenase activities were also elevated in most cases. In general, effects of clofibric acid and clofibric acid glycinate (CAS 4896-55-3) were less distinct than those of ciprofibrate and its glycinate (CAS 640772-36-7). With no parameterinvestigated major differences were seen between the parent fibrates and their glycine conjugates. Thus, the

M13 phage peptide ZL4 exerts its targeted binding effect on schistosoma japonicum via alkaline phosphatase.

PubMed

Liu, Yan; Yang, Shenghui; Xiao, Jianhua; Yu, Liang; Chen, Li; Zou, Ju; Wang, Kegeng; Tan, Sijie; Yu, Zhengyang; Zeng, Qingren

2015-01-01

The present study was to determine the targeting effect of M13 phage peptide ZL4 (MppZL4) on Schistosoma japonicum (S.j). Mice infected with S.j were injected with MppZL4. Real-time PCR was used to detect the distribution and metabolism of MppZL4 in the livers and lungs of mice. In vivo refusion test was performed to detect the targeting of MppZL4. Western blotting was employed to determine the expression of MppZL4. Live imaging was used to detect the distribution of oligopeptide MppZL4. Immunohistochemistry was employed to determine MppZL4 location on adult S.j body surface. Gomori method was employed to detect the influence of oligopeptide MppZL4 on alkaline phosphatase activity. The distribution and metabolism of MppZL4 and M13KE are not significantly different from each other at each time point. The abundance of MppZL4 is changed as S.j migrates in mice. The targeted binding effect of MppZL4 varies at different stages. ZL4 oligopeptide targets S.j in mice. The specific binding sites of MppZL4 on S.j body are mainly located in syncytial cells. The binding sites of MppZL4 on S.j body surface might be ALP or ALP-related proteins. MppZL4 had targeted binding effect on S.j with its binding site being associated with proteins related to S.j alkaline phosphatase. S.j tegument had a specifically binding site with exogenous peptides, offering new means to explore the interactions between hosts and parasites. Additionally, MppZL4 can possibly be used as targeting molecules in worm-resistant drugs or as tracing molecules in imaging diagnosis technologies.

Remote ischemic preconditioning fails to reduce infarct size in the Zucker fatty rat model of type-2 diabetes: role of defective humoral communication.

PubMed

Wider, Joseph; Undyala, Vishnu V R; Whittaker, Peter; Woods, James; Chen, Xuequn; Przyklenk, Karin

2018-03-09

Remote ischemic preconditioning (RIPC), the phenomenon whereby brief ischemic episodes in distant tissues or organs render the heart resistant to infarction, has been exhaustively demonstrated in preclinical models. Moreover, emerging evidence suggests that exosomes play a requisite role in conveying the cardioprotective signal from remote tissue to the myocardium. However, in cohorts displaying clinically common comorbidities-in particular, type-2 diabetes-the infarct-sparing effect of RIPC may be confounded for as-yet unknown reasons. To investigate this issue, we used an integrated in vivo and in vitro approach to establish whether: (1) the efficacy of RIPC is maintained in the Zucker fatty rat model of type-2 diabetes, (2) the humoral transfer of cardioprotective triggers initiated by RIPC are transported via exosomes, and (3) diabetes is associated with alterations in exosome-mediated communication. We report that a standard RIPC stimulus (four 5-min episodes of hindlimb ischemia) reduced infarct size in normoglycemic Zucker lean rats, but failed to confer protection in diabetic Zucker fatty animals. Moreover, we provide novel evidence, via transfer of serum and serum fractions obtained following RIPC and applied to HL-1 cardiomyocytes subjected to hypoxia-reoxygenation, that diabetes was accompanied by impaired humoral communication of cardioprotective signals. Specifically, our data revealed that serum and exosome-rich serum fractions collected from normoglycemic rats attenuated hypoxia-reoxygenation-induced HL-1 cell death, while, in contrast, exosome-rich samples from Zucker fatty rats did not evoke protection in the HL-1 cell model. Finally, and unexpectedly, we found that exosome-depleted serum from Zucker fatty rats was cytotoxic and exacerbated hypoxia-reoxygenation-induced cardiomyocyte death.

Methodological evaluation of indirect calorimetry data in lean and obese rats.

PubMed

Rafecas, I; Esteve, M; Fernández-López, J A; Remesar, X; Alemany, M

1993-11-01

1. The applicability of current indirect calorimetry formulae to the study of energy and substrate balances on obese rats has been evaluated. The energy consumption of series of 60-day rats of Wistar, lean and obese Zucker stock were studied by means of direct and indirect calorimetry, and by establishing their energy balance through measurement of food intake and retention. Calorimetric studies encompassed a 24 h period, with gas and heat output measurements every 2 or 5 min, respectively, for direct and indirect calorimetry. 2. The analysis of fat composition (diet, whole rat, and synthesized and oxidized fat) showed only small variations that had only a limited effect on the overall energy equation parameters. 3. A gap in the nitrogen balance, which represents a urinary N excretion lower than the actual protein oxidized, resulted in significant deviations in the estimation of carbohydrate and lipid oxidized when using the equations currently available for indirect calorimetry. 4. Analysis of the amino acid composition of diet and rat protein as well as of the portion actually oxidized, and correcting for the nitrogen gap allowed the establishment of a set of equations that gave better coincidence of the calculated data with the measured substrate balance. 5. The measured heat output of all rats was lower than the estimated values calculated by means of either indirect calorimetry of direct energy balance measurement; the difference corresponded to the energy lost in water evaporation, and was in the range of one-fifth of total energy produced in the three rat stocks. 6. Wistar rats showed a biphasic circadian rhythm of substrate utilization, with alternate lipid synthesis/degradation that reversed that of carbohydrate, concordant with nocturnal feeding habits. Zucker rats did not show this rhythm; obese rats synthesized large amounts of fat during most of the light period, consuming fat at the end of the dark period, which suggests more diurnal feeding habits

Resistance training inhibits the elevation of skeletal muscle derived-BDNF level concomitant with improvement of muscle strength in zucker diabetic rat

PubMed Central

Kim, Hee-Jae; So, Byunghun; Son, Jun Seok; Song, Han Sol; Oh, Seung Lyul; Seong, Je Kyung; Lee, Hoyoung; Song, Wook

2015-01-01

[Purpose] In the present study, we investigated the effects of 8 weeks of progressive resistance training on the level of skeletal muscle derived BDNF as well as glucose intolerance in Zucker diabetic rats. [Methods] Six week-old male Zucker diabetic fatty (ZDF) and Zucker lean control (ZLC) rats were randomly divided into 3 groups: sedentary ZLC (ZLC-Con), sedentary ZDF (ZDF-Con), and exercised ZDF (ZDF-Ex). Progressive resistance training using a ladder and tail weights was performed for 8 weeks (3 days/week). [Results] After 8 weeks of resistance training, substantial reduction in body weight was observed in ZDF-Ex compared to ZDF-Con. Though the skeletal muscle volume did not change, grip strength grip strength was significantly higher in ZDF-Ex compared to ZDF-Con. In the soleus, the level of BDNF was increased in ZDF-Con, but was significantly decreased (p<0.05) in ZDF-Ex, showing a training effect. Moreover, we found that there was a negative correlation (r=-0.657; p=0.004) between grip strength and BDNF level whereas there was a positive correlation (r=0.612; p=0.008) between plasma glucose level and BDNF level in skeletal muscle. [Conclusion] Based upon our results, we demonstrated that resistance training inhibited the elevation of skeletal muscle derived-BDNF expression concomitant with the improvement of muscle strength in zucker diabetic rats. In addition, muscle-derived BDNF might be a potential mediator for the preventive effect of resistance training on the progress of type 2 diabetes. PMID:27274460

Remodeling of the skeletal muscle microcirculation increases resistance to perfusion in obese Zucker rats.

PubMed

Frisbee, Jefferson C

2003-07-01

Whereas previous studies have demonstrated that the development of syndrome X in obese Zucker rats (OZR) is associated with impaired arteriolar reactivity to vasoactive stimuli, additional results from these studies indicate that the passive diameter of skeletal muscle arterioles is reduced in OZR versus lean Zucker rats (LZR). On the basis of these prior observations, the present study evaluated structural alterations to the skeletal muscle microcirculation as potential contributors to an elevated vascular resistance. Isolated skeletal muscle resistance arterioles exhibited a reduced passive diameter at all levels of intralumenal pressure and a left-shifted stress-strain curve in OZR versus LZR, indicative of structural remodeling of individual arterioles. Histological analyses using Griffonia simplicifolia I lectin-stained sections of skeletal muscle demonstrated reduced microvessel density (rarefaction) in OZR versus LZR, suggesting remodeling of entire microvascular networks. Finally, under maximally dilated conditions, constant flow-perfused skeletal muscle of OZR exhibited significant elevations in perfusion pressure versus LZR, indicative of an increased resistance to perfusion within the microcirculation. These data suggest that developing structural alterations to the skeletal muscle microcirculation in OZR result in elevated vascular resistance, which may, acting in concert with impaired arteriolar reactivity, contribute to blunted active hyperemic responses and compromised performance of in situ skeletal muscle with elevated metabolic demand.

Increased adipogenic conversion of muscle satellite cells in obese Zucker rats.

PubMed

Scarda, A; Franzin, C; Milan, G; Sanna, M; Dal Prà, C; Pagano, C; Boldrin, L; Piccoli, M; Trevellin, E; Granzotto, M; Gamba, P; Federspil, G; De Coppi, P; Vettor, R

2010-08-01

Visceral and intermuscular adipose tissue (IMAT) depots account for most obesity-related metabolic and cardiovascular complications. Muscle satellite cells (SCs) are mesenchymal stem cells giving rise to myotubes and also to adipocytes, suggesting their possible contribution to IMAT origin and expansion. We investigated the myogenic differentiation of SCs and the adipogenic potential of both preadipocytes and SCs from genetically obese Zucker rats (fa/fa), focusing on the role of Wnt signaling in these differentiation processes. SCs were isolated by single-fiber technique from flexor digitorum brevis muscle and preadipocytes were extracted from subcutaneous adipose tissue (AT). Morphological features and gene expression profile were evaluated during in vitro myogenesis and adipogenesis. Wingless-type MMTV integration site family member 10b (Wnt10b) expression was quantified by quantitative PCR in skeletal muscle and AT. We did not observe any difference in the proliferation rate and in the myogenic differentiation of SCs from obese and lean rats. However, a decreased insulin-induced glucose uptake was present in myotubes originating from fa/fa rats. Under adipogenic conditions, preadipocytes and SCs of obese animals displayed an enhanced adipogenesis. Wnt10b expression was reduced in obese rats in both muscle and AT. Our data suggest that the increase in different fat depots including IMAT and the reduced muscle insulin sensitivity, the major phenotypical alteration of obese Zucker rats, could be ascribed to an intrinsic defect, either genetically determined or acquired, still present in both muscle and fat precursors. The involvement of Wnt10b as a regulator of both adipogenesis and muscle-to-fat conversion is suggested.

Implications of obesity for tendon structure, ultrastructure and biochemistry: a study on Zucker rats.

PubMed

Biancalana, Adriano; Velloso, Lício Augusto; Taboga, Sebastião Roberto; Gomes, Laurecir

2012-02-01

The extracellular matrix consists of collagen, proteoglycans and non-collagen proteins. The incidence of obesity and associated diseases is currently increasing in developed countries. Obesity is considered to be a disease of modern times, and genes predisposing to the disease have been identified in humans and animals. The objective of the present study was to compare the morphological and biochemical aspects of the deep digital flexor tendon of lean (Fa/Fa or Fa/fa) and genetically obese (fa/fa) Zucker rats. Ultrastructural analysis showed the presence of lipid droplets in both groups, whereas disorganized collagen fibril bundles were observed in obese animals. Lean animals presented a larger amount of non-collagen proteins and glycosaminoglycans than obese rats. We propose that the overweight and lesser physical activity in obese animals may have provoked the alterations in the composition and organization of extracellular matrix components but a genetic mechanism cannot be excluded. These alterations might be related to organizational and structural modifications in the collagen bundles that influence the mechanical properties of tendons and the progression to a pathological state. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Bat'a Company in Zlín: A Shoe Company or a School Company?

ERIC Educational Resources Information Center

Kasper, Tomáš; Kasperová, Dana

2018-01-01

The first part of the study focuses on the characteristics and analysis of Zlín as an example of a company town. Life in the company town is characterised as a means of forming 'a new man' in Bat'a's Zlín. The second section analyses the aims of worker education in Bat'a's Zlín (in the so-called Bat'a school of work) and highlights the methods and…

Azilsartan improves glycemic status and reduces kidney damage in zucker diabetic fatty rats.

PubMed

Hye Khan, Md Abdul; Neckář, Jan; Haines, Jasmine; Imig, John D

2014-08-01

Azilsartan medoxomil (AZL-M), an angiotensin II receptor blocker, demonstrates antihypertensive and organ protective effects in hypertension. We investigated the efficacy of AZL-M to ameliorate metabolic syndrome and kidney damage associated with type 2 diabetes using Zucker diabetic fatty (ZDF) rats. ZDF rats were treated with vehicle or AZL-M for 8 weeks. Zucker diabetic lean (ZDL) rats were used as controls. Urine and plasma samples were collected for biochemical analysis, and kidney tissues were used for histopathological and immunohistopathological examination at the end of the 8-week protocol. ZDF rats were diabetic with hyperglycemia and impaired glucose tolerance, and AZL-M ameliorated the diabetic phenotype. ZDF rats were hypertensive compared with ZDL rats (181±6 vs. 129±7mm Hg), and AZL-M decreased blood pressure in ZDF rats (116±7mm Hg). In ZDF rats, there was marked renal damage with elevated proteinuria, albuminuria, nephrinuria, 2-4-fold higher tubular cast formation, and glomerular injury compared with ZDL rats. AZL-M treatment reduced renal damage in ZDF rats. ZDF rats demonstrated renal inflammation and oxidative stress with elevated urinary monocyte chemoattractant protein 1 excretion, renal infiltration of macrophages, and elevated kidney malondialdehyde levels. AZL-M reduced oxidative stress and inflammation in ZDF rats. Overall, we demonstrate that AZL-M attenuates kidney damage in type 2 diabetes. We further demonstrate that anti-inflammatory and antioxidative activities of AZL-M contribute to its kidney protective action. © American Journal of Hypertension, Ltd 2014. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Metabolic syndrome impairs reactivity and wall mechanics of cerebral resistance arteries in obese Zucker rats.

PubMed

Brooks, Steven D; DeVallance, Evan; d'Audiffret, Alexandre C; Frisbee, Stephanie J; Tabone, Lawrence E; Shrader, Carl D; Frisbee, Jefferson C; Chantler, Paul D

2015-12-01

The metabolic syndrome (MetS) is highly prevalent in the North American population and is associated with increased risk for development of cerebrovascular disease. This study determined the structural and functional changes in the middle cerebral arteries (MCA) during the progression of MetS and the effects of chronic pharmacological interventions on mitigating vascular alterations in obese Zucker rats (OZR), a translationally relevant model of MetS. The reactivity and wall mechanics of ex vivo pressurized MCA from lean Zucker rats (LZR) and OZR were determined at 7-8, 12-13, and 16-17 wk of age under control conditions and following chronic treatment with pharmacological agents targeting specific systemic pathologies. With increasing age, control OZR demonstrated reduced nitric oxide bioavailability, impaired dilator (acetylcholine) reactivity, elevated myogenic properties, structural narrowing, and wall stiffening compared with LZR. Antihypertensive therapy (e.g., captopril or hydralazine) starting at 7-8 wk of age blunted the progression of arterial stiffening compared with OZR controls, while treatments that reduced inflammation and oxidative stress (e.g., atorvastatin, rosiglitazone, and captopril) improved NO bioavailability and vascular reactivity compared with OZR controls and had mixed effects on structural remodeling. These data identify specific functional and structural cerebral adaptations that limit cerebrovascular blood flow in MetS patients, contributing to increased risk of cognitive decline, cerebral hypoperfusion, and ischemic stroke; however, these pathological adaptations could potentially be blunted if treated early in the progression of MetS. Copyright © 2015 the American Physiological Society.

Pancreatic Fat Accumulation, Fibrosis, and Acinar Cell Injury in the Zucker Diabetic Fatty Rat Fed a Chronic High-Fat Diet

PubMed Central

Matsuda, Akiko; Makino, Naohiko; Tozawa, Tomohiro; Shirahata, Nakao; Honda, Teiichiro; Ikeda, Yushi; Sato, Hideyuki; Ito, Miho; Kakizaki, Yasuharu; Akamatsu, Manabu; Ueno, Yoshiyuki; Kawata, Sumio

2014-01-01

Objective The histological alteration of the exocrine pancreas in obesity has not been clarified. In the present study, we investigated biochemical and histological changes in the exocrine pancreas of obese model rats. Methods Zucker lean rats were fed a standard diet, and Zucker diabetic fatty (ZDF) rats were divided into 2 groups fed a standard diet and a high-fat diet, respectively. These experimental groups were fed each of the diets from 6 weeks until 12, 18, 24 weeks of age. We performed blood biochemical assays and histological analysis of the pancreas. Results In the ZDF rats fed a high-fat diet, the ratio of accumulated pancreatic fat area relative to exocrine gland area was increased significantly at 18 weeks of age in comparison with the other 2 groups (P < 0.05), and lipid droplets were observed in acinar cells. Subsequently, at 24 weeks of age in this group, pancreatic fibrosis and the serum exocrine pancreatic enzyme levels were increased significantly relative to the other 2 groups (P < 0.01). Conclusions In ZDF rats fed a chronic high-fat diet, fat accumulates in pancreatic acinar cells, and this fatty change seems to be related to subsequent pancreatic fibrosis and acinar cell injury. PMID:24717823

Relationship between lipogenesis, ketogenesis, and malonyl-CoA content in isolated hepatocytes from the obese Zucker rat adapted to a high-fat diet.

PubMed

Malewiak, M I; Griglio, S; Le Liepvre, X

1985-07-01

The relationship between lipogenesis and ketogenesis and the concentration of malonyl coenzyme A (CoA) was investigated in hepatocytes from adult obese Zucker rats and their lean littermates fed either a control low-fat diet or a high-fat diet (30% lard in weight). With the control diet, lipogenesis--although strongly inhibited in the presence of either 1 mmol/L oleate, 10(-6) mol/L glucagon or 0.1 mmol/L TOFA (a hypolipidemic drug)--remained about fifteen-fold higher in the obese rats than in the lean rats. In contrast, ketogenesis under some conditions (oleate + TOFA) was not significantly lower (30%) as compared with the lean rats. After adaptation to the high-fat diet, lipogenesis was depressed fourfold in the lean rats and ninefold in the obese ones; however its magnitude remained significantly higher in the latter, namely at a value close to that measured in control-fed lean rats. Ketogenesis was comparable in lean and obese rats and much higher in the presence of 1 mmol/L oleate than of 0.3 mmol/L oleate, whereas lipogenesis did not vary with increasing oleate concentration in the medium. Acetyl-CoA carboxylase activity measured in liver homogenates was higher in the obese group, but was stepwise inhibited by increasing concentrations of oleyl-CoA regardless of the diet for both lean and obese rats, thus showing no abnormality of in vitro responsiveness to this inhibitor. With the control diet, hepatocyte malonyl-CoA levels were significantly higher in the obese rats, both in the basal state and after inhibition of lipogenesis by oleate and TOFA.(ABSTRACT TRUNCATED AT 250 WORDS)

A High-Protein Diet Reduces Weight Gain, Decreases Food Intake, Decreases Liver Fat Deposition, and Improves Markers of Muscle Metabolism in Obese Zucker Rats

PubMed Central

French, William W.; Dridi, Sami; Shouse, Stephanie A.; Wu, Hexirui; Hawley, Aubree; Lee, Sun-Ok; Gu, Xuan; Baum, Jamie I.

2017-01-01

A primary factor in controlling and preventing obesity is through dietary manipulation. Diets higher in protein have been shown to improve body composition and metabolic health during weight loss. The objective of this study was to examine the effects of a high-protein diet versus a moderate-protein diet on muscle, liver and fat metabolism and glucose regulation using the obese Zucker rat. Twelve-week old, male, Zucker (fa/fa) and lean control (Fa/fa) rats were randomly assigned to either a high-protein (40% energy) or moderate-protein (20% energy) diet for 12 weeks, with a total of four groups: lean 20% protein (L20; n = 8), lean 40% protein (L40; n = 10), obese 20% protein (O20; n = 8), and obese 40% protein (O40; n = 10). At the end of 12 weeks, animals were fasted and euthanized. There was no difference in food intake between L20 and L40. O40 rats gained less weight and had lower food intake (p < 0.05) compared to O20. O40 rats had lower liver weight (p < 0.05) compared to O20. However, O40 rats had higher orexin (p < 0.05) levels compared to L20, L40 and O20. Rats in the L40 and O40 groups had less liver and muscle lipid deposition compared to L20 and L40 diet rats, respectively. O40 had decreased skeletal muscle mechanistic target of rapamycin complex 1 (mTORC1) phosphorylation and peroxisome proliferator-activated receptor gamma (PPARγ) mRNA expression compared to O20 (p < 0.05), with no difference in 5′ AMP-activated protein kinase (AMPK), eukaryotic translation initiation factor 4E binding protein 1 (4EBP1), protein kinase B (Akt) or p70 ribosomal S6 kinase (p70S6K) phosphorylation. The data suggest that high-protein diets have the potential to reduce weight gain and alter metabolism, possibly through regulation of an mTORC1-dependent pathway in skeletal muscle. PMID:28594375

A High-Protein Diet Reduces Weight Gain, Decreases Food Intake, Decreases Liver Fat Deposition, and Improves Markers of Muscle Metabolism in Obese Zucker Rats.

PubMed

French, William W; Dridi, Sami; Shouse, Stephanie A; Wu, Hexirui; Hawley, Aubree; Lee, Sun-Ok; Gu, Xuan; Baum, Jamie I

2017-06-08

A primary factor in controlling and preventing obesity is through dietary manipulation. Diets higher in protein have been shown to improve body composition and metabolic health during weight loss. The objective of this study was to examine the effects of a high-protein diet versus a moderate-protein diet on muscle, liver and fat metabolism and glucose regulation using the obese Zucker rat. Twelve-week old, male, Zucker (fa/fa) and lean control (Fa/fa) rats were randomly assigned to either a high-protein (40% energy) or moderate-protein (20% energy) diet for 12 weeks, with a total of four groups: lean 20% protein (L20; n = 8), lean 40% protein (L40; n = 10), obese 20% protein (O20; n = 8), and obese 40% protein (O40; n = 10). At the end of 12 weeks, animals were fasted and euthanized. There was no difference in food intake between L20 and L40. O40 rats gained less weight and had lower food intake ( p < 0.05) compared to O20. O40 rats had lower liver weight ( p < 0.05) compared to O20. However, O40 rats had higher orexin ( p < 0.05) levels compared to L20, L40 and O20. Rats in the L40 and O40 groups had less liver and muscle lipid deposition compared to L20 and L40 diet rats, respectively. O40 had decreased skeletal muscle mechanistic target of rapamycin complex 1 (mTORC1) phosphorylation and peroxisome proliferator-activated receptor gamma (PPARγ) mRNA expression compared to O20 ( p < 0.05), with no difference in 5' AMP-activated protein kinase (AMPK), eukaryotic translation initiation factor 4E binding protein 1 (4EBP1), protein kinase B (Akt) or p70 ribosomal S6 kinase (p70S6K) phosphorylation. The data suggest that high-protein diets have the potential to reduce weight gain and alter metabolism, possibly through regulation of an mTORC1-dependent pathway in skeletal muscle.

In Vivo Cannabidiol Treatment Improves Endothelium-Dependent Vasorelaxation in Mesenteric Arteries of Zucker Diabetic Fatty Rats

PubMed Central

Wheal, Amanda J.; Jadoon, Khalid; Randall, Michael D.; O’Sullivan, Saoirse E.

2017-01-01

Background and purpose: We have shown that in vitro treatment with cannabidiol (CBD, 2 h) enhances endothelial function in arteries from Zucker diabetic fatty (ZDF) rats, partly due to a cyclooxygenase (COX)-mediated mechanism. The aim of the present study was to determine whether treatment with CBD in vivo would also enhance endothelial function. Experimental approach: Male ZDF rats, or ZDF Lean rats, were treated for 7 days (daily i.p. injection) with either 10mg/kg CBD or vehicle (n = 6 per group). Sections of mesenteric resistance arteries, femoral arteries and thoracic aortae were mounted on a wire myograph, and cumulative concentration-response curves to endothelium-dependent (acetylcholine, ACh, 1 nM–100 μM) or endothelium-independent (sodium nitroprusside, SNP, 1 nM–100 μM) agents were constructed. Multiplex analysis was used to measure serum metabolic and cardiovascular biomarkers. Key results: Vasorelaxation to ACh was significantly enhanced in mesenteric arteries from CBD-treated ZDF rats, but not ZDF Lean rats. The enhanced vasorelaxation in ZDF mesenteric arteries was no longer observed after COX inhibition using indomethacin or nitric oxide (NO) inhibition using L-NAME. Increased levels of serum c-peptide, insulin and intracellular adhesion molecule-1 observed in the ZDF compared to ZDF Lean rats were no longer significant after 7 days CBD treatment. Conclusion and implications: Short-term in vivo treatment with CBD improves ex vivo endothelium-dependent vasorelaxation in mesenteric arteries from ZDF rats due to COX- or NO-mediated mechanisms, and leads to improvements in serum biomarkers. PMID:28572770

Voluntary running exercise prevents β-cell failure in susceptible islets of the Zucker diabetic fatty rat.

PubMed

Delghingaro-Augusto, Viviane; Décary, Simon; Peyot, Marie-Line; Latour, Martin G; Lamontagne, Julien; Paradis-Isler, Nicolas; Lacharité-Lemieux, Marianne; Akakpo, Huguette; Birot, Olivier; Nolan, Christopher J; Prentki, Marc; Bergeron, Raynald

2012-01-15

Physical activity improves glycemic control in type 2 diabetes (T2D), but its contribution to preserving β-cell function is uncertain. We evaluated the role of physical activity on β-cell secretory function and glycerolipid/fatty acid (GL/FA) cycling in male Zucker diabetic fatty (ZDF) rats. Six-week-old ZDF rats engaged in voluntary running for 6 wk (ZDF-A). Inactive Zucker lean and ZDF (ZDF-I) rats served as controls. ZDF-I rats displayed progressive hyperglycemia with β-cell failure evidenced by falling insulinemia and reduced insulin secretion to oral glucose. Isolated ZDF-I rat islets showed reduced glucose-stimulated insulin secretion expressed per islet and per islet protein. They were also characterized by loss of the glucose regulation of fatty acid oxidation and GL/FA cycling, reduced mRNA expression of key β-cell genes, and severe reduction of insulin stores. Physical activity prevented diabetes in ZDF rats through sustaining β-cell compensation to insulin resistance shown in vivo and in vitro. Surprisingly, ZDF-A islets had persistent defects in fatty acid oxidation, GL/FA cycling, and β-cell gene expression. ZDF-A islets, however, had preserved islet insulin mRNA and insulin stores compared with ZDF-I rats. Physical activity did not prevent hyperphagia, dyslipidemia, or obesity in ZDF rats. In conclusion, islets of ZDF rats have a susceptibility to failure that is possibly due to altered β-cell fatty acid metabolism. Depletion of pancreatic islet insulin stores is a major contributor to islet failure in this T2D model, preventable by physical activity.

Acute Exacerbation of Sleep Apnea by Hyperoxia Impairs Cognitive Flexibility in Brown-Norway Rats

PubMed Central

Topchiy, Irina; Amodeo, Dionisio A.; Ragozzino, Michael E.; Waxman, Jonathan; Radulovacki, Miodrag; Carley, David W.

2014-01-01

Study Objectives: To determine whether learning deficits occur during acute exacerbation of spontaneous sleep related breathing disorder (SRBD) in rats with high (Brown Norway; BN) and low (Zucker Lean; ZL) apnea propensity. Design: Spatial acquisition (3 days) and reversal learning (3 days) in the Morris water maze (MWM) with polysomnography (12:00–08:00): (1) with acute SRBD exacerbation (by 20-h hyperoxia immediately preceding reversal learning) or (2) without SRBD exacerbation (room air throughout). Setting: Randomized, placebo-controlled, repeated-measures design. Participants: 14 BN rats; 16 ZL rats. Interventions: 20-h hyperoxia. Measurements and Results: Apneas were detected as cessation of respiration ≥ 2 sec. Swim latency in MWM, apnea indices (AI; apneas/hour of sleep) and percentages of recording time for nonrapid eye movement (NREM), rapid eye movement (REM), and total sleep were assessed. Baseline AI in BN rats was more than double that of ZL rats (22.46 ± 2.27 versus 10.7 ± 0.9, P = 0.005). Hyperoxia increased AI in both BN (34.3 ± 7.4 versus 22.46 ± 2.27) and ZL rats (15.4 ± 2.7 versus 10.7 ± 0.9) without changes in sleep stage percentages. Control (room air) BN and ZL rats exhibited equivalent acquisition and reversal learning. Acute exacerbation of AI by hyperoxia produced a reversal learning performance deficit in BN but not ZL rats. In addition, the percentage of REM sleep and REM apnea index in BN rats during hyperoxia negatively correlated with reversal learning performance. Conclusions: Acute exacerbation of sleep related breathing disorder by hyperoxia impairs reversal learning in a rat strain with high apnea propensity, but not a strain with a low apnea propensity. This suggests a non-linear threshold effect may contribute to the relationships between sleep apnea and cognitive dysfunctions, but strain-specific differences also may be important. Citation: Topchiy I, Amodeo DA, Ragozzino ME, Waxman J, Radulovacki M, Carley DW. Acute

Circulating adiponectin concentrations are increased by dietary resistant starch and correlate with serum 25-hydroxycholecalciferol concentrations and kidney function in Zucker diabetic fatty rats.

PubMed

Koh, Gar Yee; Derscheid, Rachel; Fuller, Kelly N Z; Valentine, Rudy J; Leow, Shu En; Reed, Leah; Wisecup, Emily; Schalinske, Kevin L; Rowling, Matthew J

2016-04-01

We previously reported that dietary resistant starch (RS) type 2 prevented proteinuria and promoted vitamin D balance in type 2 diabetic (T2D) rats. Here, our primary objective was to identify potential mechanisms that could explain our earlier observations. We hypothesized that RS could promote adiponectin secretion and regulate the renin-angiotensin system activity in the kidney. Lean Zucker rats (n = 5) were fed control diet; Zucker diabetic fatty rats (n = 5/group) were fed either an AIN-93G control diet (DC) or AIN-93G diet containing either 10% RS or 20% RS (HRS) for 6 weeks. Resistant starch had no impact on blood glucose concentrations and hemoglobin A1c percentage, yet circulating adiponectin was 77% higher in HRS-fed rats, compared to DC rats. Adiponectin concentrations strongly correlated with serum 25-hydroxycholecalciferol (r = 0.815; P < .001) and urinary creatinine concentrations (r = 0.818; P < .001) and inversely correlated with proteinuria (r = -0.583; P = .02). Serum angiotensin II concentrations were 44% lower, and expression of the angiotensin II receptor, type 1, was attenuated in RS-fed rats. Moreover, we observed a 14-fold increase in messenger RNA expression of nephrin, which is required for functioning of the renal filtration barrier, in HRS rats. The HRS, but not 10% RS diet, increased circulating 25-hydroxycholecalciferol concentrations and attenuated urinary loss of vitamin D metabolites in Zucker diabetic fatty rats. Taken together, we provide evidence that vitamin D balance in the presence of hyperglycemia is strongly associated with serum adiponectin levels and reduced renal renin-angiotensin system signaling. Copyright © 2016 Elsevier Inc. All rights reserved.

Metabolic profiling of muscle contraction in lean compared with obese rodents.

PubMed

Thyfault, John P; Cree, Melanie G; Tapscott, Edward B; Bell, Jill A; Koves, Timothy R; Ilkayeva, Olga; Wolfe, Robert R; Dohm, G Lynis; Muoio, Deborah M

2010-09-01

Interest in the pathophysiological relevance of intramuscular triacylglycerol (IMTG) accumulation has grown from numerous studies reporting that abnormally high glycerolipid levels in tissues of obese and diabetic subjects correlate negatively with glucose tolerance. Here, we used a hindlimb perfusion model to examine the impact of obesity and elevated IMTG levels on contraction-induced changes in skeletal muscle fuel metabolism. Comprehensive lipid profiling was performed on gastrocnemius muscles harvested from lean and obese Zucker rats immediately and 25 min after 15 min of one-legged electrically stimulated contraction compared with the contralateral control (rested) limbs. Predictably, IMTG content was grossly elevated in control muscles from obese rats compared with their lean counterparts. In muscles of obese (but not lean) rats, contraction resulted in marked hydrolysis of IMTG, which was then restored to near resting levels during 25 min of recovery. Despite dramatic phenotypical differences in contraction-induced IMTG turnover, muscle levels of diacylglycerol (DAG) and long-chain acyl-CoAs (LCACoA) were surprisingly similar between groups. Tissue profiles of acylcarnitine metabolites suggested that the surfeit of IMTG in obese rats fueled higher rates of fat oxidation relative to the lean group. Muscles of the obese rats had reduced lactate levels immediately following contraction and higher glycogen resynthesis during recovery, consistent with a lipid-associated glucose-sparing effect. Together, these findings suggest that contraction-induced mobilization of local lipid reserves in obese muscles promotes beta-oxidation, while discouraging glucose utilization. Further studies are necessary to determine whether persistent oxidation of IMTG-derived fatty acids contributes to systemic glucose intolerance in other physiological settings.

Microvascular disorders in obese Zucker rats are restored by a rice bran diet.

PubMed

Justo, M L; Claro, C; Vila, E; Herrera, M D; Rodriguez-Rodriguez, R

2014-05-01

Nutritional-based approaches aimed to prevent microvascular dysfunction associated to obesity present potential advantages over pharmacological strategies. Our aim was to test whether a rice bran enzymatic extract (RBEE)-supplemented diet could attenuate microvascular alterations in obese rats. Lean and obese Zucker rats were fed standard diet supplemented or not with 1% and 5% RBEE for 20 weeks. Functional studies were performed in small mesenteric arteries in isometric myograph. Immunoblotting and fluorescence studies were made in arterial homogenates and arterial sections, respectively. RBEE-supplementation restored microvascular function in obese rats through a marked increase in NO and endothelial-derived hyperpolarizing factor contribution by up-regulation of eNOS and calcium-activated potassium channels expression, respectively, in association to a substantial reduction of microvascular inflammation and superoxide anion formation. These data agrees with the beneficial actions of RBEE on dyslipidemia, hyperinsulinemia and hypertension in obesity. The multi-factorial properties of RBEE-diet, especially for restoring the function of small resistance arteries shows this dietary-based approach to be a promising candidate for prevention of microvascular alterations in obesity, which are crucial in cardiovascular events in obese subjects. Copyright © 2013 Elsevier B.V. All rights reserved.

Cardiac β-adrenergic responsiveness of obese Zucker rats: The role of AMPK.

PubMed

Bussey, Carol T; Thaung, Hp Aye; Hughes, Gillian; Bahn, Andrew; Lamberts, Regis R

2018-06-05

What is the central question of the study? What is the main finding and its importance? 1. Is the reduced signalling of AMPK, a key regulator of energy homeostasis in the heart, responsible for the reduced β-adrenergic responsiveness of the heart in obesity? 2. Inhibition of AMPK in isolated hearts prevented the reduced cardiac β-adrenergic responsiveness of obese rats, which was accompanied by reduced phosphorylation of AMPK, a proxy of AMPK activity. This suggests a direct functional link between β-adrenergic responsiveness and AMPK signalling in the heart, and that AMPK might be an important target to restore the β-adrenergic responsiveness in the heart in obesity. The obesity epidemic impacts heavily on cardiovascular health, in part due to changes in cardiac metabolism. AMP-activated protein kinase (AMPK) is a key regulator of energy homeostasis in the heart, and is regulated by β-adrenoceptors (AR) under normal conditions. In obesity, chronic sympathetic overactivation leads to impaired cardiac β-AR responsiveness, although it is unclear whether AMPK signalling, downstream of β-AR, contributes to this dysfunction. Therefore, we aimed to determine whether reduced AMPK signalling is responsible for the reduced β-AR responsiveness in obesity. In isolated hearts of lean and obese Zucker rats, we tested β-AR responsiveness to β 1 -AR agonist isoproterenol (ISO, 1 × 10 -10 - 5 × 10 -8  M) in the absence and presence of the AMPK inhibitor compound C (CC, 10 μM). β 1 -AR expression and AMPK phosphorylation were assessed by Western blot. β-Adrenergic responsiveness was reduced in the hearts of obese rats (LogEC50 of ISO-developed pressure dose-response curves: lean -8.53 ± 0.13 vs. obese -8.35 ± 0.10 10 x M; p < 0.05 lean vs. obese, n = 6 per group). This difference was not apparent after AMPK inhibition (LogEC50 of ISO-developed pressure curves: lean CC -8.19 ± 0.12 vs. obese CC 8.17 ± 0.13 10 x M, p > 0.05, n = 6 per group

Dipeptidylpeptidase-IV, a key enzyme for the degradation of incretins and neuropeptides: activity and expression in the liver of lean and obese rats

PubMed Central

Tarantola, E.; Bertone, V.; Milanesi, G.; Capelli, E.; Ferrigno, A.; Neri, D.; Vairetti, M.; Barni, S.; Freitas, I.

2012-01-01

Given the scarcity of donors, moderately fatty livers (FLs) are currently being considered as possible grafts for orthotopic liver transplantation (OLT), notwithstanding their poor tolerance to conventional cold preservation. The behaviour of parenchymal and sinusoidal liver cells during transplantation is being studied worldwide. Much less attention has been paid to the biliary tree, although this is considered the Achille's heel even of normal liver transplantation. To evaluate the response of the biliary compartment of FLs to the various phases of OLT reliable markers are necessary. Previously we demonstrated that Alkaline Phosphatase was scarcely active in bile canaliculi of FLs and thus ruled it out as a marker. As an alternative, dipeptidylpeptidase-IV (DPP-IV), was investigated. This ecto-peptidase plays an important role in glucose metabolism, rapidly inactivating insulin secreting hormones (incretins) that are important regulators of glucose metabolism. DPP-IV inhibitors are indeed used to treat Type II diabetes. Neuropeptides regulating bile transport and composition are further important substrates of DPP-IV in the enterohepatic axis. DPP-IV activity was investigated with an azo-coupling method in the liver of fatty Zucker rats (fa/fa), using as controls lean Zucker (fa/+) and normal Wistar rats. Protein expression was studied by immunofluorescence with the monoclonal antibody (clone 5E8). In Wistar rat liver, DPP-IV activity and expression were high in the whole biliary tree, and moderate in sinusoid endothelial cells, in agreement with the literature. Main substrates of DPP-IV in hepatocytes and cholangiocytes could be incretins GLP-1 and GIP, and neuropeptides such as vasoactive intestinal peptide (VIP) and substance P, suggesting that these substances are inactivated or modified through the biliary route. In lean Zucker rat liver the enzyme reaction and protein expression patterns were similar to those of Wistar rat. In obese rat liver the patterns

Dipeptidylpeptidase--IV, a key enzyme for the degradation of incretins and neuropeptides: activity and expression in the liver of lean and obese rats.

PubMed

Tarantola, E; Bertone, V; Milanesi, G; Capelli, E; Ferrigno, A; Neri, D; Vairetti, M; Barni, S; Freitas, I

2012-10-08

Given the scarcity of donors, moderately fatty livers (FLs) are currently being considered as possible grafts for orthotopic liver transplantation (OLT), notwithstanding their poor tolerance to conventional cold preservation. The behaviour of parenchymal and sinusoidal liver cells during transplantation is being studied worldwide. Much less attention has been paid to the biliary tree, although this is considered the Achille's heel even of normal liver transplantation. To evaluate the response of the biliary compartment of FLs to the various phases of OLT reliable markers are necessary. Previously we demonstrated that Alkaline Phosphatase was scarcely active in bile canaliculi of FLs and thus ruled it out as a marker. As an alternative, dipeptidylpeptidase-IV (DPP-IV), was investigated. This ecto-peptidase plays an important role in glucose metabolism, rapidly inactivating insulin secreting hormones (incretins) that are important regulators of glucose metabolism. DPP-IV inhibitors are indeed used to treat Type II diabetes. Neuropeptides regulating bile transport and composition are further important substrates of DPP-IV in the enterohepatic axis. DPP-IV activity was investigated with an azo-coupling method in the liver of fatty Zucker rats (fa/fa), using as controls lean Zucker (fa/+) and normal Wistar rats. Protein expression was studied by immunofluorescence with the monoclonal antibody (clone 5E8). In Wistar rat liver, DPP-IV activity and expression were high in the whole biliary tree, and moderate in sinusoid endothelial cells, in agreement with the literature. Main substrates of DPP-IV in hepatocytes and cholangiocytes could be incretins GLP-1 and GIP, and neuropeptides such as vasoactive intestinal peptide (VIP) and substance P, suggesting that these substances are inactivated or modified through the biliary route. In lean Zucker rat liver the enzyme reaction and protein expression patterns were similar to those of Wistar rat. In obese rat liver the patterns

Effects of habitual exercise on the eHsp72-induced release of inflammatory cytokines by macrophages from obese Zucker rats.

PubMed

Garcia, J J; Martin-Cordero, L; Hinchado, M D; Bote, M E; Ortega, E

2013-06-01

Regular exercise is a good non-pharmacological treatment of metabolic syndrome in that it improves obesity, diabetes, and inflammation. The 72 kDa extracellular heat shock protein (eHsp72) is released during exercise, thus stimulating the inflammatory responses. The aim of the present work was to evaluate the effect of regular exercise on the eHsp72-induced release of IL-1β, IL-6, and TNFα by macrophages from genetically obese Zucker rats (fa/fa) (ObZ), using lean Zucker (LZ) rats (Fa/fa) to provide reference values. ObZ presented a higher plasma concentration of eHsp72 than LZ, and exercise increased that concentration. In response to eHsp72, the macrophages from ObZ released less IL-1β and TNFα, but more IL-6, than macrophages from LZ. While eHsp72 stimulated the release of IL-1β, TNFα, and IL-6 in the macrophages from healthy LZ (with respect to the constitutive release), it inhibited the release of IL-1β and IL-6 in macrophages from ObZ. The habitual exercise improved the release of inflammatory cytokines by macrophages from ObZ in response to eHsp72 (it increased IL-1β and TNFα, and decreased IL-6), tending to values closer to those determined in healthy LZ. A deregulated macrophage inflammatory and stress response induced by eHsp72 underlies MS, and this is improved by habitual exercise. © Georg Thieme Verlag KG Stuttgart · New York.

COX-2 is involved in vascular oxidative stress and endothelial dysfunction of renal interlobar arteries from obese Zucker rats.

PubMed

Muñoz, Mercedes; Sánchez, Ana; Pilar Martínez, María; Benedito, Sara; López-Oliva, Maria-Elvira; García-Sacristán, Albino; Hernández, Medardo; Prieto, Dolores

2015-07-01

Obesity is related to vascular dysfunction through inflammation and oxidative stress and it has been identified as a risk factor for chronic renal disease. In the present study, we assessed the specific relationships among reactive oxygen species (ROS), cyclooxygenase 2 (COX-2), and endothelial dysfunction in renal interlobar arteries from a genetic model of obesity/insulin resistance, the obese Zucker rats (OZR). Relaxations to acetylcholine (ACh) were significantly reduced in renal arteries from OZR compared to their counterpart, the lean Zucker rat (LZR), suggesting endothelial dysfunction. Blockade of COX with indomethacin and with the selective blocker of COX-2 restored the relaxations to ACh in obese rats. Selective blockade of the TXA2/PGH2 (TP) receptor enhanced ACh relaxations only in OZR, while inhibition of the prostacyclin (PGI2) receptor (IP) enhanced basal tone and inhibited ACh vasodilator responses only in LZR. Basal production of superoxide was increased in arteries of OZR and involved NADPH and xanthine oxidase activation and NOS uncoupling. Under conditions of NOS blockade, ACh induced vasoconstriction and increased ROS generation that were augmented in arteries from OZR and blunted by COX-2 inhibition and by the ROS scavenger tempol. Hydrogen peroxide (H2O2) evoked both endothelium- and vascular smooth muscle (VSM)-dependent contractions, as well as ROS generation that was reduced by COX-2 inhibition. In addition, COX-2 expression was enhanced in both VSM and endothelium of renal arteries from OZR. These results suggest that increased COX-2-dependent vasoconstriction contributes to renal endothelial dysfunction through enhanced (ROS) generation in obesity. COX-2 activity is in turn upregulated by ROS. Copyright © 2015 Elsevier Inc. All rights reserved.

Impaired Ca2+ handling in penile arteries from prediabetic Zucker rats: involvement of Rho kinase.

PubMed

Villalba, Nuria; Contreras, Cristina; Hernández, Medardo; García-Sacristán, Albino; Prieto, Dolores

2011-06-01

Diabetes is associated with an increased vascular tone usually involved in the pathogenesis of diabetic cardiovascular complications such as hypertension, stroke, coronary artery disease, or erectile dysfunction (ED). Enhanced contractility of penile erectile tissue has been associated with augmented activity of the RhoA/Rho kinase (RhoK) pathway in models of diabetes-associated ED. The present study assessed whether abnormal vasoconstriction in penile arteries from prediabetic obese Zucker rats (OZRs) is due to changes in the intracellular Ca(2+) concentration ([Ca(2+)](i)) and/or in myofilament Ca(2+) sensitivity. Penile arteries from OZRs and lean Zucker rats (LZRs) were mounted on microvascular myographs for simultaneous measurements of [Ca(2+)](i) and tension. The relationships between [Ca(2+)](i) and contraction for the α(1)-adrenergic vasoconstrictor phenylephrine (PE) were left shifted and steeper in OZRs compared with LZRs, although the magnitude of the contraction was similar in both groups. In contrast, the vasoconstriction induced by the thromboxane A(2) receptor agonist U-46619 was augmented in arteries from OZRs, and this increase was associated with an increase in both the sensitivity and maximum responses to Ca(2+). The RhoK inhibitor Y-27632 (10 μM) reduced the vasoconstriction induced by PE to a greater extent in OZRs than in LZRs, without altering Ca(2+). Y-27632 inhibited with a greater potency the contraction elicited by high KCl in arteries from OZRs compared with LZRs without changing [Ca(2+)](i). RhoK-II expression was augmented in arteries from OZRs. These results suggest receptor-specific changes in the Ca(2+) handling of penile arteries under conditions of metabolic syndrome. Whereas augmented vasoconstriction upon activation of the thromboxane A(2) receptor is coupled to enhanced Ca(2+) entry, a RhoK-mediated enhancement of myofilament Ca(2+) sensitivity is coupled with the α(1)-adrenergic vasoconstriction in penile arteries from OZRs.

Inhibition of HIV-1 gene expression by retroviral vector-mediated small-guide RNAs that direct specific RNA cleavage by tRNase ZL

PubMed Central

Habu, Yuichiro; Miyano-Kurosaki, Naoko; Kitano, Michiko; Endo, Yumihiko; Yukita, Masakazu; Ohira, Shigeru; Takaku, Hiroaki; Nashimoto, Masayuki; Takaku, Hiroshi

2005-01-01

The tRNA 3′-processing endoribonuclease (tRNase Z or 3′ tRNase; EC 3.1.26.11) is an essential enzyme that removes the 3′ trailer from pre-tRNA. The long form (tRNase ZL) can cleave a target RNA in vitro at the site directed by an appropriate small-guide RNA (sgRNA). Here, we investigated whether this sgRNA/tRNase ZL strategy could be applied to gene therapy for AIDS. We tested the ability of four sgRNA-expression plasmids to inhibit HIV-1 gene expression in COS cells, using a transient-expression assay. The three sgRNAs guide inhibition of HIV-1 gene expression in cultured COS cells. Analysis of the HIV-1 mRNA levels suggested that sgRNA directed the tRNase ZL to mediate the degradation of target RNA. The observation that sgRNA was localized primarily in nuclei suggests that tRNase ZL cleaves the HIV-1 mRNA when complexed with sgRNA in this location. We also examined the ability of two retroviral vectors expressing sgRNA to suppress HIV-1 expression in HIV-1-infected Jurkat T cells. sgRNA-SL4 suppressed HIV-1 expression almost completely in infected cells for up to 18 days. These results suggest that the sgRNA/tRNase ZL approach is effective in downregulating HIV-1 gene expression. PMID:15647506

Inhibition of Gastric Lipase as a Mechanism for Body Weight and Plasma Lipids Reduction in Zucker Rats Fed a Rosemary Extract Rich in Carnosic Acid

PubMed Central

Romo Vaquero, María; Yáñez-Gascón, María-Josefa; García Villalba, Rocío; Larrosa, Mar; Fromentin, Emilie; Ibarra, Alvin; Roller, Marc; Tomás-Barberán, Francisco; Espín de Gea, Juan Carlos; García-Conesa, María-Teresa

2012-01-01

Background Rosemary (Rosmarinus officinalis L.) extracts (REs) exhibit hepatoprotective, anti-obesity and anti-inflammatory properties and are widely used in the food industry. REs are rich in carnosic acid (CA) and carnosol which may be responsible for some of the biological activities of REs. The aim of this study was to investigate whether inhibition of lipase activity in the gut may be a mechanism by which a RE enriched in CA (40%) modulates body weight and lipids levels in a rat model of metabolic disorders and obesity. Methods and Principal Findings RE was administered for 64 days to lean (fa/+) and obese (fa/fa) female Zucker rats and body weight, food intake, feces weight and blood biochemical parameters were monitored throughout the study. Lipase activity (hydrolysis of p-nitrophenylbutyrate) was measured in the gastrointestinal tract at the end of the study and the contents of CA, carnosol and methyl carnosate were also determined. Sub-chronic administration of RE moderately reduced body weight gain in both lean and obese animals but did not affect food intake. Serum triglycerides, cholesterol and insulin levels were also markedly decreased in the lean animals supplemented with RE. Importantly, lipase activity was significantly inhibited in the stomach of the RE-supplemented animals where the highest content of intact CA and carnosol was detected. Conclusions Our results confirm that long-term administration of RE enriched in CA moderates weight gain and improves the plasma lipids profile, primarily in the lean animals. Our data also suggest that these effects may be caused, at least in part, by a significant inhibition of gastric lipase and subsequent reduction in fat absorption. PMID:22745826

Nebivolol ameliorated kidney damage in Zucker diabetic fatty rats by regulation of oxidative stress/NO pathway: comparison with captopril.

PubMed

Wang, Yan; An, Wenjing; Zhang, Fei; Niu, Mengzhen; Liu, Yu; Shi, Ruizan

2018-06-23

The aim was to evaluate the effects and mechanisms of nebivolol on renal damage in Zucker diabetic fatty (ZDF) rats, in comparison with those of atenolol and captopril. Animals were divided into: control lean Zucker rats, ZDF rats, ZDF rats orally treated with nebivolol (10 mg/kg), atenolol (100 mg/kg) or captopril (40 mg/kg) for 6 months. Systolic blood pressure (SBP), blood glucose, kidney structure and function, plasma and kidney levels of nitric oxide (NO) and asymmetric dimethylarginine (ADMA), and oxidant status were evaluated. Kidney expressions of AMP-activated protein kinase (AMPK), NADPH oxidase (NOX) isoforms 2 and 4 and subunit p22 phox , nitric oxide synthase (NOS) isoforms, eNOS uncoupling, protein arginine N-methyltransferase (PRMT) 1, and dimethylarginine dimethylaminohydrolase (DDAH) 1 and 2 were tested. All drugs induced a similar control of SBP. Nebivolol did not affect the increased plasma glucose. Unlike atenolol, nebivolol prevented the decrease in plasma insulin, and, like captopril, it reduced plasma lipid contents. Nebivolol ameliorated, to a greater extent than captopril, damages to renal structure and function, which were associated with an improvement in interlobular artery dysfunction. Nebivolol elevated kidney phosphorylation of AMPK, attenuated NOX4 and p22 phox expression and oxidative stress marker levels. Nebivolol increased plasma and renal NO, enhanced expressions of eNOS, p-eNOS and nNOS, and suppressed eNOS uncoupling and iNOS expression. High ADMA in plasma and kidney were decreased by nebivolol through increasing DDAH2 and decreasing PRMT1. Long-term treatment of nebivolol ameliorated diabetic nephropathy, at least in part, via regulation of renal oxidative stress/NO pathway. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Soy protein isolate modified metabolic phenotype and hepatic Wnt signaling in obese Zucker rats.

PubMed

Cain, J; Banz, W J; Butteiger, D; Davis, J E

2011-10-01

We have previously shown that soy protein isolate (SPI) with intact phytoestrogen content prevented obesity-related dysfunction. Recent data have suggested that soy ingredients may act as regulators of adipogenic programming in adipose tissue (AT) and liver. Thus, the current study was undertaken to determine whether the beneficial effects of SPI are linked to changes in adipogenic regulators, such as the Wnt signaling cascade. For this, lean (LZR) and obese Zucker (OZR) rats were provided isocaloric and isonitrogenous diets containing SPI, sodium caseinate, or dairy whey protein for 17 weeks. At termination, SPI increased body weight and total adiposity in rodents, which corresponded with an increase in both adipocyte size and number. Furthermore, markers of inflammation, hypercholesterolemia, and hepatic steatosis were all reduced in OZR rats provided SPI. Transcript abundance of several canonical and noncanonical Wnt signaling intermediates in liver, but not AT, was distinctly modified by SPI. Collectively, these data confirm the protective SPI attenuated obesity-related metabolic dysfunction conceivably through regulation of adipogenic programming, as evident by changes in AT morphology and hepatic Wnt signaling. Collectively, this study confirmed the potential utilization of soy protein and its bioactive ingredients for prevention and treatment of obesity-related comorbidities. © Georg Thieme Verlag KG Stuttgart · New York.

Electrophysiological characterization of spinal neurons in different models of diabetes type 1- and type 2-induced neuropathy in rats.

PubMed

Schuelert, N; Gorodetskaya, N; Just, S; Doods, H; Corradini, L

2015-04-16

Diabetic polyneuropathy (DPN) is a devastating complication of diabetes. The underlying pathogenesis of DPN is still elusive and an effective treatment devoid of side effects presents a challenge. There is evidence that in type-1 and -2 diabetes, metabolic and morphological changes lead to peripheral nerve damage and altered central nociceptive transmission, which may contribute to neuropathic pain symptoms. We characterized the electrophysiological response properties of spinal wide dynamic range (WDR) neurons in three diabetic models. The streptozotocin (STZ) model was used as a drug-induced model of type-1 diabetes, and the BioBreeding/Worcester (BB/Wor) and Zucker diabetic fatty (ZDF) rat models were used for genetic DPN models. Data were compared to the respective control group (BB/Wor diabetic-resistant, Zucker lean (ZL) and saline-injected Wistar rat). Response properties of WDR neurons to mechanical stimulation and spontaneous activity were assessed. We found abnormal response properties of spinal WDR neurons in all diabetic rats but not controls. Profound differences between models were observed. In BB/Wor diabetic rats evoked responses were increased, while in ZDF rats spontaneous activity was increased and in STZ rats mainly after discharges were increased. The abnormal response properties of neurons might indicate differential pathological, diabetes-induced, changes in spinal neuronal transmission. This study shows for the first time that specific electrophysiological response properties are characteristic for certain models of DPN and that these might reflect the diverse and complex symptomatology of DPN in the clinic. Copyright © 2015 IBRO. Published by Elsevier Ltd. All rights reserved.

Green tea polyphenols ameliorate non-alcoholic fatty liver disease through upregulating AMPK activation in high fat fed Zucker fatty rats.

PubMed

Tan, Yi; Kim, Jane; Cheng, Jing; Ong, Madeleine; Lao, Wei-Guo; Jin, Xing-Liang; Lin, Yi-Guang; Xiao, Linda; Zhu, Xue-Qiong; Qu, Xian-Qin

2017-06-07

To investigate protective effects and molecular mechanisms of green tea polyphenols (GTP) on non-alcoholic fatty liver disease (NAFLD) in Zucker fatty (ZF) rats. Male ZF rats were fed a high-fat diet (HFD) for 2 wk then treated with GTP (200 mg/kg) or saline (5 mL/kg) for 8 wk, with Zucker lean rat as their control. At the end of experiment, serum and liver tissue were collected for measurement of metabolic parameters, alanine aminotransferase (ALT) and aspartate aminotransferase (AST), inflammatory cytokines and hepatic triglyceride and liver histology. Immunoblotting was used to detect phosphorylation of AMP-activated protein kinase (AMPK) acetyl-CoA carboxylase (ACC), and sterol regulatory element-binding protein 1c (SREBP1c). Genetically obese ZF rats on a HFD presented with metabolic features of hepatic pathological changes comparable to human with NAFLD. GTP intervention decreased weight gain (10.1%, P = 0.052) and significantly lowered visceral fat (31.0%, P < 0.01). Compared with ZF-controls, GTP treatment significantly reduced fasting serum insulin, glucose and lipids levels. Reduction in serum ALT and AST levels (both P < 0.01) were observed in GTP-treated ZF rats. GTP treatment also attenuated the elevated TNFα and IL-6 in the circulation. The increased hepatic TG accumulation and cytoplasmic lipid droplet were attenuated by GTP treatment, associated with significantly increased expression of AMPK-Thr172 ( P < 0.05) and phosphorylated ACC and SREBP1c (both P < 0.05), indicating diminished hepatic lipogenesis and triglycerides out flux from liver in GTP treated rats. The protective effects of GTP against HFD-induced NAFLD in genetically obese ZF rats are positively correlated to reduction in hepatic lipogenesis through upregulating the AMPK pathway.

Dietary fructans, but not cellulose, decrease triglyceride accumulation in the liver of obese Zucker fa/fa rats.

PubMed

Daubioul, Catherine; Rousseau, Nicolas; Demeure, Roger; Gallez, Bernard; Taper, Henryk; Declerck, Barbara; Delzenne, Nathalie

2002-05-01

This study was designed to compare the effects of dietary supplementation with nondigestible carbohydrates, differing in fermentability by colonic bacteria, on hepatic steatosis in growing obese Zucker rats. Male Zucker fa/fa rats were divided into three groups: a control group that received the basal diet, a fructan group that received 10 g highly fermented Synergy 1/100 g diet and a cellulose group that received 10 g poorly fermented Vivapur Microcrystalline cellulose/100 g diet. Rats consuming fructan had a lower energy intake, a lower body weight and less triacylglycerol accumulation in the liver as assessed in vivo by nuclear magnetic resonance (NMR) spectroscopy, and ex vivo by biochemical and histochemical analysis compared with the control and/or cellulose groups. The high fermentation of fructans compared with cellulose was reflected by greater cecal contents and by a twofold greater propionate concentration in the portal vein of rats fed fructan compared with those fed cellulose. By measuring the capacity of hepatocytes isolated from liver of Zucker rats to synthesize triglycerides or total lipids from different precursors, we showed that propionate, at the concentrations measured in the portal vein of rats treated with fructan, selectively decreased the incorporation of acetate into total lipids, a phenomenon that could contribute, along with the lower energy intake, to less triglyceride accumulation in the liver of obese Zucker rats fed dietary fructans.

Hydroxypropyl methylcellulose, a viscous soluble fiber, reduces insulin resistance and decreases fatty liver in Zucker Diabetic Fatty rats.

PubMed

Brockman, David A; Chen, Xiaoli; Gallaher, Daniel D

2012-11-12

Diets producing a high glycemic response result in exaggerated insulin secretion which induces hepatic lipogenesis, contributing to development of insulin resistance and fatty liver. Viscous dietary fibers blunt the postprandial rise in blood glucose, however their effect on type 2 diabetes and obesity are not entirely known. This study examined the effect of chronic consumption of the viscous, non-fermentable dietary fiber, hydroxypropyl methylcellulose (HPMC), on glucose control, insulin resistance and liver lipids in an obese diabetic rat model. Three groups of Zucker Diabetic Fatty (ZDF) rats were fed diets containing either 5% non-viscous cellulose (control), low viscosity HPMC (LV-HPMC) or high viscosity HPMC (HV- HPMC) for six weeks. Zucker lean littermates consuming cellulose served as a negative control. Markers of glucose control, including oral glucose tolerance test, glycated hemoglobin and urinary glucose, were measured as well as adiposity and the accumulation of liver lipids. The HPMC diets increased the viscosity of the small intestinal contents and reduced the postprandial rise in blood glucose. The food efficiency ratio was greater with HPMC feeding compared to the obese control and urinary excretion of glucose and ketone bodies was reduced. The two HPMC groups had lower glycated hemoglobin and kidney weights and a reduced area under the curve during a glucose tolerance test, indicating improved glucose control. Epididymal fat pad weight as percent of body weight was reduced in the HV-HPMC group compared to the obese control group. The HV-HPMC group also had lower concentrations of liver lipid and cholesterol and reduced liver weight. However, HV-HPMC feeding did not affect hepatic gene expression of SREBP-1c or FAS. Muscle concentration of acylcarnitines, a lipid intermediate in fatty acid β-oxidation, was not different between the HPMC groups and obese control, suggesting no change in muscle fatty acid oxidation by HPMC. Consumption of the

Mixed compared with single-source proteins in high-protein diets affect kidney structure and function differentially in obese fa/fa Zucker rats.

PubMed

Devassy, Jessay G; Wojcik, Jennifer L; Ibrahim, Naser H M; Zahradka, Peter; Taylor, Carla G; Aukema, Harold M

2017-02-01

Questions remain regarding the potential negative effects of dietary high protein (HP) on kidney health, particularly in the context of obesity in which the risk for renal disease is already increased. To examine whether some of the variability in HP effects on kidney health may be due to source of protein, obese fa/fa Zucker rats were given HP (35% of energy from protein) diets containing either casein, soy protein, or a mixed source of animal and plant proteins for 12 weeks. Control lean and obese rats were given diets containing casein at normal protein (15% of energy from protein) levels. Body weight and blood pressure were measured, and markers of renal structural changes, damage, and function were assessed. Obesity alone resulted in mild renal changes, as evidenced by higher kidney weights, proteinuria, and glomerular volumes. In obese rats, increasing the protein level using the single, but not mixed, protein sources resulted in higher renal fibrosis compared with the lean rats. The mixed-protein HP group also had lower levels of serum monocyte chemoattractant protein-1, even though this diet further increased kidney and glomerular size. Soy and mixed-protein HP diets also resulted in a small number of damaged glomeruli, while soy compared with mixed-protein HP diet delayed the increase in blood pressure over time. Since obesity itself confers added risk of renal disease, an HP diet from mixed-protein sources that enables weight loss but has fewer risks to renal health may be advantageous.

The effects of repetitive vibration on sensorineural function: biomarkers of sensorineural injury in an animal model of metabolic syndrome

PubMed Central

Kiedrowski, Megan; Waugh, Stacey; Miller, Roger; Johnson, Claud; Krajnak, Kristine

2016-01-01

Exposure to hand-transmitted vibration in the work-place can result in the loss of sensation and pain in workers. These effects may be exacerbated by pre-existing conditions such as diabetes or the presence of primary Raynaud's phenomena. The goal of these studies was to use an established model of vibration-induced injury in Zucker rats. Lean Zucker rats have a normal metabolic profile, while obese Zucker rats display symptoms of metabolic disorder or Type II diabetes. This study examined the effects of vibration in obese and lean rats. Zucker rats were exposed to 4 h of vibration for 10 consecutive days at a frequency of 125 Hz and acceleration of 49 m/s2 for 10 consecutive days. Sensory function was checked using transcutaneous electrical stimulation on days 1, 5 and 9 of the exposure. Once the study was complete the ventral tail nerves, dorsal root ganglia and spinal cord were dissected, and levels of various transcripts involved in sensorineural dysfunction were measured. Sensorineural dysfunction was assessed using transcutaneous electrical stimulation. Obese Zucker rats displayed very few changes in sensorineural function. However they did display significant changes in transcript levels for factors involved in synapse formation, peripheral nerve remodeling, and inflammation. The changes in transcript levels suggested that obese Zucker rats had some level of sensory nerve injury prior to exposure, and that exposure to vibration activated pathways involved in injury and re-innervation. PMID:26433044

Acute effect of the dual angiotensin-converting enzyme and neutral endopeptidase 24-11 inhibitor mixanpril on insulin sensitivity in obese Zucker rat

PubMed Central

Arbin, V; Claperon, N; Fournié-Zaluski, M -C; Roques, B P; Peyroux, J

2001-01-01

The aim of this study was to determine whether acute dual angiotensin-converting enzyme (ACE)/neutral endopeptidase 24-11 (NEP) inhibition could improve whole body insulin-mediated glucose disposal (IMGD) more than ACE inhibition alone and whether this effect was mediated by the kinin-nitric oxide (NO) pathway activation.We therefore compared in anaesthetized obese (fa/fa) Zucker rats (ZOs) the effects of captopril (2 mg kg−1, i.v.+2 mg kg−1 h−1), retrothiorphan (25 mg kg−1, i.v. +25 mg  kg−1 h−1), a selective NEP inhibitor, and mixanpril (25 mg kg−1, i.v.+25 mg kg−1 h−1), a dual ACE/NEP inhibitor, on IMGD using hyperinsulinaemic euglycaemic clamp technique. The role of the kinin-NO pathway in the effects of mixanpril was tested using a bradykinin B2 receptor antagonist (Hoe-140, 300 μg kg−1) and a NO-synthase inhibitor (Nω-nitro-L-arginine methyl ester, L-NAME, 10 mg kg−1 i.v. +10 mg kg−1 h−1) as pretreatments.Insulin sensitivity index (ISI) was lower in ZO controls than in lean littermates. Increases in ISI were observed in captopril- and retrothiorphan-treated ZOs. In mixanpril-treated ZOs, ISI was further increased, compared to captopril- and retrothiorphan-treated ZOs.In ZOs, Hoe-140 and L-NAME alone did not significantly alter and slightly reduced the ISI respectively. Hoe-140 and L-NAME markedly inhibited the ISI improvement induced by mixanpril.These results show that in obese insulin-resistant Zucker rats, under acute conditions, NEP or ACE inhibition can improve IMGD and that dual ACE/NEP inhibition improves IMGD more effectively than does either single inhibition. This effect is linked to an increased activation of the kinin-NO pathway. PMID:11399666

Gene expression and adiposity are modified by soy protein in male Zucker diabetic fatty rats.

PubMed

Banz, William J; Davis, Jeremy; Peterson, Richard; Iqbal, Muhammad J

2004-12-01

It has earlier been demonstrated that soy protein diets ameliorate the diabetic phenotype in obese Zucker rats. In this study, we further investigated physiological changes related to adiposity in male Zucker diabetic fatty rats consuming soy-based diets and compared these diets with the insulin-sensitizing drug, rosiglitazone. Transcript abundance of known genes was assessed in the livers to identify potential molecular connections between soy diets and adiposity. Male Zucker diabetic fatty rats were assigned to casein (C) protein, low-isoflavone soy (LIS) protein, high-isoflavone soy (HIS) protein, or C + rosiglitazone (CR) diets. Compared with the C diet, the LIS diet decreased plasma lipids and increased body weight, but did not change liver weight or carcass adiposity. HIS decreased plasma lipids, liver weight, and body weight. CR decreased plasma lipids and increased carcass adiposity and body weight with no effect on liver weight. In LIS livers, 15 genes involved in signaling and lipid metabolism were up-regulated 2-fold or higher. In HIS livers, seven genes had a 2-fold or higher change in abundance. However, in CR livers, none of the genes was significantly changed compared with the C diet. There appears to be a distinct change in gene expression associated with soy diets as compared with C-based diets and rosiglitazone treatment.

Dual implantation of a radio-telemeter and vascular access port allows repeated hemodynamic and pharmacological measures in conscious lean and obese rats.

PubMed

Bussey, C T; Leeuw, A E de; Cook, R F; Ashley, Z; Schofield, J; Lamberts, R R

2014-07-01

Expansion of physiological knowledge increasingly requires examination of processes in the normal, conscious state. The current study describes a novel approach combining surgical implantation of radio-telemeters with vascular access ports (VAPs) to allow repeated hemodynamic and pharmacological measures in conscious rats. Dual implantation was conducted on 16-week-old male lean and obese Zucker rats. Continued viability one month after surgery was observed in 67% of lean and 44% of obese animals, giving an overall 54% completion rate. Over the five-week measurement period, reliable and reproducible basal mean arterial pressure and heart rate measures were observed. VAP patency and receptor-independent vascular reactivity were confirmed by consistent hemodynamic responses to sodium nitroprusside (6.25 µg/kg). Acutely, minimal hemodynamic responses to repeated bolus administration of 0.2 mL saline indicated no significant effect of increased blood volume or administration stress, making repeated acute measures viable. Similarly, repeated administration of the β-adrenoceptor agonist dobutamine (30 µg/kg) at 10 min intervals resulted in reproducible hemodynamic changes in both lean and obese animals. Therefore, our study demonstrates that this new approach is viable for the acute and chronic assessment of hemodynamic and pharmacological responses in both lean and obese conscious rats. This technique reduces the demand for animal numbers and allows hemodynamic measures with minimal disruption to animals' welfare, while providing reliable and reproducible results over several weeks. In conclusion, dual implantation of a radio-telemeter and VAP introduces a valuable technique for undertaking comprehensive studies involving repeated pharmacological tests in conscious animals to address important physiological questions. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

The Combined Intervention with Germinated Vigna radiata and Aerobic Interval Training Protocol Is an Effective Strategy for the Treatment of Non-Alcoholic Fatty Liver Disease (NAFLD) and Other Alterations Related to the Metabolic Syndrome in Zucker Rats.

PubMed

Kapravelou, Garyfallia; Martínez, Rosario; Nebot, Elena; López-Jurado, María; Aranda, Pilar; Arrebola, Francisco; Cantarero, Samuel; Galisteo, Milagros; Porres, Jesus M

2017-07-19

Metabolic syndrome (MetS) is a group of related metabolic alterations that increase the risk of developing non-alcoholic fatty liver disease (NAFLD). Several lifestyle interventions based on dietary treatment with functional ingredients and physical activity are being studied as alternative or reinforcement treatments to the pharmacological ones actually in use. In the present experiment, the combined treatment with mung bean ( Vigna radiata ), a widely used legume with promising nutritional and health benefits that was included in the experimental diet as raw or 4 day-germinated seed flour, and aerobic interval training protocol (65-85% VO₂ max) has been tested in lean and obese Zucker rats following a 2 × 2 × 2 (2 phenotypes, 2 dietary interventions, 2 lifestyles) factorial ANOVA (Analysis of Variance) statistical analysis. Germination of V. radiata over a period of four days originated a significant protein hydrolysis leading to the appearance of low molecular weight peptides. The combination of 4 day-germinated V. radiata and aerobic interval training was more efficient compared to raw V. radiata at improving the aerobic capacity and physical performance, hepatic histology and functionality, and plasma lipid parameters as well as reverting the insulin resistance characteristic of the obese Zucker rat model. In conclusion, the joint intervention with legume sprouts and aerobic interval training protocol is an efficient treatment to improve the alterations of glucose and lipid metabolism as well as hepatic histology and functionality related to the development of NAFLD and the MetS.

Feeding butter with elevated content of trans-10, cis-12 conjugated linoleic acid to obese-prone rats impairs glucose and insulin tolerance.

PubMed

Hamilton, Melissa; Hopkins, Loren E; AlZahal, Ousama; MacDonald, Tara L; Cervone, Daniel T; Wright, David C; McBride, Brian W; Dyck, David J

2015-09-28

We recently demonstrated that feeding a natural CLAt10,c12-enriched butter to lean female rats resulted in small, but significant increases in fasting glucose and insulin concentrations, and impaired insulin tolerance. Our goal was to extend these findings by utilizing the diabetes-prone female fatty Zucker rat. Rats were fed custom diets containing 45 % kcal of fat derived from control and CLAt10,c12-enriched butter for 8 weeks. CLA t10,c12-enriched butter was prepared from milk collected from cows fed a high fermentable carbohydrate diet to create subacute rumen acidosis (SARA); control (non-SARA) butter was collected from cows fed a low grain diet. Female fatty Zucker rats (10 weeks old) were randomly assigned to one of four diet treatments: i) low fat (10 % kcal), ii) 45 % kcal lard, iii) 45 % kcal SARA butter, or iv) 45 % kcal non-SARA butter. A low fat fed lean Zucker group was used as a control group. After 8 weeks, i) glucose and insulin tolerance tests, ii) insulin signaling in muscle, adipose and liver, and iii) metabolic caging measurements were performed. Glucose and insulin tolerance were significantly impaired in all fatty Zucker groups, but to the greatest extent in the LARD and SARA conditions. Insulin signaling (AKT phosphorylation) was impaired in muscle, visceral (perigonadal) adipose tissue and liver in fatty Zucker rats, but was generally similar across dietary groups. Physical activity, oxygen consumption, food intake and weight gain were also similar amongst the various fatty Zucker groups. Increasing the consumption of a food naturally enriched with CLAt10,c12 significantly worsens glucose and insulin tolerance in a diabetes-prone rodent model. This outcome is not explained by changes in tissue insulin signaling, physical activity, energy expenditure, food intake or body mass.

Development of ZL400 Mine Cooling Unit Using Semi-Hermetic Screw Compressor and Its Application on Local Air Conditioning in Underground Long-Wall Face

NASA Astrophysics Data System (ADS)

Chu, Zhaoxiang; Ji, Jianhu; Zhang, Xijun; Yan, Hongyuan; Dong, Haomin; Liu, Junjie

2016-12-01

Aiming at heat injuries occurring in the process of deep coal mining in China, a ZL400 mine-cooling unit employing semi-hermetic screw compressor with a cooling capacity of 400 kW is developed. This paper introduced its operating principle, structural characteristics and technical indexes. By using the self-built testing platform, some parameters for indication of its operation conditions were tested on the ground. The results show that the aforementioned cooling unit is stable in operation: cooling capacity of the unit was 420 kW underground-test conditions, while its COP (coefficient of performance) reached 3.4. To address the issue of heat injuries existing in No. 16305 U-shaped long-wall ventilation face of Jining No. 3 coal mine, a local air conditioning system was developed with ZL400 cooling unit as the system's core. The paper presented an analysis of characteristics of the air current flowing in the air-mixing and cooling mode of ZL400 cooling unit used in air intake way. Through i-d patterns we described the process of the airflow treatment, such as cooling, mixing and heating, etc. The cooling system decreased dry bulb temperature on working face by 3°C on average and 3.8°C at most, while lowered the web bulb temperature by 3.6°C on average and 4.8°C at most. At the same time, it reduced relative humidity by 5% on average and 8.6% at most. The field application of the ZL400 cooling unit had gain certain effects in air conditioning and provided support for the solution of mine heat injuries in China in terms of technology and equipment.

Healthcare Lean.

PubMed

Long, John C

2003-01-01

Lean Thinking is an integrated approach to designing, doing and improving the work of people that have come together to produce and deliver goods, services and information. Healthcare Lean is based on the Toyota production system and applies concepts and techniques of Lean Thinking to hospitals and physician practices.

[Effect of SO2 volume fraction in flue gas on the adsorption behaviors adsorbed by ZL50 activated carbon and kinetic analysis].

PubMed

Gao, Ji-xian; Wang, Tie-feng; Wang, Jin-fu

2010-05-01

The influence of SO2 dynamic adsorption behaviors using ZL50 activated carbon for flue gas desulphurization and denitrification under different SO2 volume fraction was investigated experimentally, and the kinetic analysis was conducted by kinetic models. With the increase of SO2 volume fraction in flue gas, the SO2 removal ratio and the activity ratio of ZL50 activated carbon decreased, respectively, and SO2 adsorption rate and capacity increased correspondingly. The calculated results indicate that Bangham model has the best prediction effect, the chemisorption processes of SO2 was significantly affected by catalytic oxidative reaction. The adsorption rate constant of Lagergren's pseudo first order model increased with the increase of inlet SO, volume fraction, which indicated that catalytic oxidative reaction of SO2 adsorbed by ZL50 activated carbon may be the rate controlling step in earlier adsorption stage. The Lagergren's and Bangham's initial adsorption rate were deduced and defined, respectively. The Ho's and Elovich's initial adsorption rate were also deduced in this paper. The Bangham's initial adsorption rate values were defined in good agreement with those of experiments. The defined Bangham's adsorptive reaction kinetic model can describe the SO2 dynamic adsorption rate well. The studied results indicated that the SO2 partial order of initial reaction rate was one or adjacent to one, while the O2 and water vapor partial order of initial reaction rate were constants ranging from 0.15-0.20 and 0.45-0.50, respectively.

Evaluating Lean in healthcare.

PubMed

Burgess, Nicola; Radnor, Zoe

2013-01-01

The purpose of this paper is to present findings relating to how Lean is implemented in English hospitals. Lean implementation snapshots in English hospitals were conducted by content analysing all annual reports and web sites over two time periods, giving a thorough analysis of Lean's status in English healthcare. The article identifies divergent approaches to Lean implementation in English hospitals. These approaches are classified into a typology to facilitate an evaluation of how Lean is implemented. The findings suggest that implementation tends to be isolated rather than system-wide. A second dataset conveys Lean implementation trajectory across the time period. These data signal Lean's increasing use by English hospitals and shows progression towards an increasingly systemic approach. Data were collected using content analysis methods, which relies on how "Lean" methods were articulated within the annual report and/or on the organisation's web site, which indicates approaches taken by hospital staff implementing Lean. This research is the first to examine more closely "how" Lean is implemented in English hospitals. The emergent typology could prove relevant to other public sector organizations and service organisations more generally. The research also presents a first step to understanding Lean thinking in the English NHS. This article empirically analyses Lean implementation in English hospitals. It identifies divergent approaches that allow inferences about how far Lean is implemented in an organisation. Data represent a baseline for further analysis so that Lean implementation can be tracked.

Treadmill exercise prevents diabetes-induced increases in lipid peroxidation and decreases in Cu,Zn-superoxide dismutase levels in the hippocampus of Zucker diabetic fatty rats.

PubMed

Kim, Jong Whi; Chae, Junghyun; Nam, Sung Min; Kim, Yo Na; Yoo, Dae Young; Choi, Jung Hoon; Jung, Hyo Young; Song, Wook; Hwang, In Koo; Seong, Je Kyung; Yoon, Yeo Sung

2015-01-01

In the present study, we investigated the effects of treadmill exercise on lipid peroxidation and Cu,Zn-superoxide dismutase (SOD1) levels in the hippocampus of Zucker diabetic fatty (ZDF) rats and lean control rats (ZLC) during the onset of diabetes. At 7 weeks of age, ZLC and ZDF rats were either placed on a stationary treadmill or made to run for 1 h/day for 5 consecutive days at 16~22 m/min for 5 weeks. At 12 weeks of age, the ZDF rats had significantly higher blood glucose levels and body weight than the ZLC rats. In addition, malondialdehyde (MDA) levels in the hippocampus of the ZDF rats were significantly higher than those of the ZLC rats whereas SOD1 levels in the hippocampus of the ZDF rats were moderately decreased. Notably, treadmill exercise prevented the increase of blood glucose levels in ZDF rats. In addition, treadmill exercise significantly ameliorated changes in MDA and SOD1 levels in the hippocampus although SOD activity was not altered. These findings suggest that diabetes increases lipid peroxidation and decreases SOD1 levels, and treadmill exercise can mitigate diabetes-induced oxidative damage in the hippocampus.

Renoprotective mechanisms of soy protein intake in the obese Zucker rat

PubMed Central

Trujillo, Joyce; Cruz, Cristino; Tovar, Armando; Vaidya, Vishal; Zambrano, Elena; Bonventre, Joseph V.; Gamba, Gerardo; Torres, Nimbe; Bobadilla, Norma A.

2008-01-01

We previously showed that long-term consumption of a soy protein diet (SoyP) reduces renal damage in obese Zucker (ObeseZ) rats by restoring urinary NO2 and NO3 excretion (UNO2/NO3V), suggesting that nitric oxide (NO) deficiency may contribute to the renal progression observed in this model. In addition, there is compelling evidence that hyperleptinemia produced deleterious effects on the kidney through its interaction with the short leptin receptor (ObRa). This study was designed to evaluate the contribution of the NO/endothelial NO synthase (eNOS) system, renal oxidative stress, and ObRa expression to the renoprotection conferred by the consumption of a SoyP in ObeseZ rats. Ten lean and ten male ObeseZ rats were included. One-half of each group was fed with a 20% SoyP and the other half with a 20% casein protein diet (CasP) over the course of 160 days. eNOS protein levels and phosphorylation, renal lipoperoxidation (rLPO), and antioxidant enzyme activity were assessed. In addition, renal ObRa, TGF-β, and kidney injury molecule (Kim-1) mRNA levels, as well as urinary Kim-1 levels, were measured. Renal injury observed in ObeseZ rats fed with CasP was not associated with changes in eNOS expression or phosphorylation. However, this group did present with increased rLPO, reduced catalase activity, and upregulation of ObRa, TGF-β1, and Kim-1. In contrast, ObeseZ rats fed with a SoyP exhibited a reduction in NOS-Thr495 phosphorylation and rLPO, as well as an enhanced catalase activity. These findings were associated with a significant reduction of ObRa, TGF-β1, and Kim-1 mRNA levels and urinary Kim-1 protein. Our results show that renoprotection by SoyP in ObeseZ rats is in part mediated by increased NO availability secondary to a reduction in eNOS-T495 phosphorylation and oxidative stress, together with a significant reduction in ObRa and TGF-β expression. PMID:18815216

Effects of clenbuterol on insulin resistance in conscious obese Zucker rats.

PubMed

Pan, S J; Hancock, J; Ding, Z; Fogt, D; Lee, M; Ivy, J L

2001-04-01

The present study was conducted to determine the effect of chronic administration of the long-acting beta(2)-adrenergic agonist clenbuterol on rats that are genetically prone to insulin resistance and impaired glucose tolerance. Obese Zucker rats (fa/fa) were given 1 mg/kg of clenbuterol by oral intubation daily for 5 wk. Controls received an equivalent volume of water according to the same schedule. At the end of the treatment, rats were catheterized for euglycemic-hyperinsulinemic (15 mU insulin. kg(-1). min(-1)) clamping. Clenbuterol did not change body weight compared with the control group but caused a redistribution of body weight: leg muscle weights increased, and abdominal fat weight decreased. The glucose infusion rate needed to maintain euglycemia and the rate of glucose disappearance were greater in the clenbuterol-treated rats. Furthermore, plasma insulin levels were decreased, and the rate of glucose uptake into hindlimb muscles and abdominal fat was increased in the clenbuterol-treated rats. This increased rate of glucose uptake was accompanied by a parallel increase in the rate of glycogen synthesis. The increase in muscle glucose uptake could not be ascribed to an increase in the glucose transport protein GLUT-4 in clenbuterol-treated rats. We conclude that chronic clenbuterol treatment reduces the insulin resistance of the obese Zucker rat by increasing insulin-stimulated muscle and adipose tissue glucose uptake. The improvements noted may be related to the repartitioning of body weight between tissues.

Leucine and Protein Metabolism in Obese Zucker Rats

PubMed Central

She, Pengxiang; Olson, Kristine C.; Kadota, Yoshihiro; Inukai, Ayami; Shimomura, Yoshiharu; Hoppel, Charles L.; Adams, Sean H.; Kawamata, Yasuko; Matsumoto, Hideki; Sakai, Ryosei; Lang, Charles H.; Lynch, Christopher J.

2013-01-01

Branched-chain amino acids (BCAAs) are circulating nutrient signals for protein accretion, however, they increase in obesity and elevations appear to be prognostic of diabetes. To understand the mechanisms whereby obesity affects BCAAs and protein metabolism, we employed metabolomics and measured rates of [1-14C]-leucine metabolism, tissue-specific protein synthesis and branched-chain keto-acid (BCKA) dehydrogenase complex (BCKDC) activities. Male obese Zucker rats (11-weeks old) had increased body weight (BW, 53%), liver (107%) and fat (∼300%), but lower plantaris and gastrocnemius masses (−21–24%). Plasma BCAAs and BCKAs were elevated 45–69% and ∼100%, respectively, in obese rats. Processes facilitating these rises appeared to include increased dietary intake (23%), leucine (Leu) turnover and proteolysis [35% per g fat free mass (FFM), urinary markers of proteolysis: 3-methylhistidine (183%) and 4-hydroxyproline (766%)] and decreased BCKDC per g kidney, heart, gastrocnemius and liver (−47–66%). A process disposing of circulating BCAAs, protein synthesis, was increased 23–29% by obesity in whole-body (FFM corrected), gastrocnemius and liver. Despite the observed decreases in BCKDC activities per gm tissue, rates of whole-body Leu oxidation in obese rats were 22% and 59% higher normalized to BW and FFM, respectively. Consistently, urinary concentrations of eight BCAA catabolism-derived acylcarnitines were also elevated. The unexpected increase in BCAA oxidation may be due to a substrate effect in liver. Supporting this idea, BCKAs were elevated more in liver (193–418%) than plasma or muscle, and per g losses of hepatic BCKDC activities were completely offset by increased liver mass, in contrast to other tissues. In summary, our results indicate that plasma BCKAs may represent a more sensitive metabolic signature for obesity than BCAAs. Processes supporting elevated BCAA]BCKAs in the obese Zucker rat include increased dietary intake, Leu and

Trouble and Triumph: German Life-Turkish Tradition in Renan Demirkan's "Schwarzer Tee mit drei Stuck Zucker"

ERIC Educational Resources Information Center

Ebert, Reika

2004-01-01

This paper explores Demirkan's narrative strategies in "Schwarzer Tee mit drei Stuck Zucker" to negotiate issues of a life between two cultures and traditions. Based on Bhabha's insights that mainstream culture needs intellectual and artistic infusion from the margins of a society in order to remain vital; and that cultural production…

Lean NOx Trap Catalysis for Lean Natural Gas Engine Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parks, II, James E; Storey, John Morse; Theiss, Timothy J

the efficiency and emissions of natural gas reciprocating engines are being pursued. Approaches include: stoichiometric engine operation with exhaust gas recirculation and three-way catalysis, advanced combustion modes such as homogeneous charge compression ignition, and extension of the lean combustion limit with advanced ignition concepts and/or hydrogen mixing. The research presented here addresses the technical approach of combining efficient lean spark-ignited natural gas combustion with low emissions obtained from a lean NOx trap catalyst aftertreatment system. This approach can be applied to current lean engine technology or advanced lean engines that may result from related efforts in lean limit extension. Furthermore, the lean NOx trap technology has synergy with hydrogen-assisted lean limit extension since hydrogen is produced from natural gas during the lean NOx trap catalyst system process. The approach is also applicable to other lean engines such as diesel engines, natural gas turbines, and lean gasoline engines; other research activities have focused on those applications. Some commercialization of the technology has occurred for automotive applications (both diesel and lean gasoline engine vehicles) and natural gas turbines for stationary power. The research here specifically addresses barriers to commercialization of the technology for large lean natural gas reciprocating engines for stationary power. The report presented here is a comprehensive collection of research conducted by Oak Ridge National Laboratory (ORNL) on lean NOx trap catalysis for lean natural gas reciprocating engines. The research was performed in the Department of Energy's ARES program from 2003 to 2007 and covers several aspects of the technology. All studies were conducted at ORNL on a Cummins C8.3G+ natural gas engine chosen based on industry input to simulate large lean natural gas engines. Specific technical areas addressed by the research include: NOx reduction efficiency

EPA Lean Government Initiative: How to Replicate Lean Successes

EPA Pesticide Factsheets

This Lean Replication Primer describes how EPA Offices and Regions can identify and adapt successful practices from previous Lean projects to “replicate” their successes and generate further improvements.

TRUNK LEAN DURING A SINGLE-LEG SQUAT IS ASSOCIATED WITH TRUNK LEAN DURING PITCHING.

PubMed

Plummer, Hillary A; Oliver, Gretchen D; Powers, Christopher M; Michener, Lori A

2018-02-01

Impaired trunk motion during pitching may be a risk factor for upper extremity injuries. Specifically, increased forces about the shoulder and elbow have been observed in pitchers with excessive contralateral trunk lean during pitching. Because of the difficulty in identifying abnormal trunk motions during a high-speed task such as pitching, a clinical screening test is needed to identify pitchers who have impaired trunk motion during pitching. The purpose of this study was to determine the relationship between the degree of lateral trunk lean during the single-leg squat and amount of trunk lean during pitching and if trunk lean during pitching can be predicted from lean during the single-leg squat. Controlled Laboratory Study; Cross-sectional. Seventy-three young baseball pitchers (11.4 ± 1.7 years; 156.3 ± 11.9 cm; 50.5 ± 8.8 kg) participated. An electromagnetic tracking system was used to obtain trunk kinematic data during a single-leg squat task (lead leg) and at maximum shoulder external rotation of a fastball pitch. Pearson correlation coefficients for trunk lean during the single-leg squat and pitching were calculated. A linear regression analysis was performed to determine if trunk lean during pitching can be predicted from lean during the single-leg squat. There was a positive correlation between trunk lean during the single-leg squat and trunk lean during pitching (r = 0.53; p<0.001). Lateral trunk lean during the single-leg squat predicted the amount of lateral trunk lean during pitching (R 2 = 0.28; p < 0.001). A moderate positive correlation was observed between trunk lean during an SLS and pitching. Trunk lean during the single-leg squat explained 28% of the variance in trunk lean during pitching. Diagnosis, level 3.

TRUNK LEAN DURING A SINGLE-LEG SQUAT IS ASSOCIATED WITH TRUNK LEAN DURING PITCHING

PubMed Central

Oliver, Gretchen D.; Powers, Christopher M.; Michener, Lori A.

2018-01-01

Background Impaired trunk motion during pitching may be a risk factor for upper extremity injuries. Specifically, increased forces about the shoulder and elbow have been observed in pitchers with excessive contralateral trunk lean during pitching. Because of the difficulty in identifying abnormal trunk motions during a high-speed task such as pitching, a clinical screening test is needed to identify pitchers who have impaired trunk motion during pitching. Hypothesis/Purpose The purpose of this study was to determine the relationship between the degree of lateral trunk lean during the single-leg squat and amount of trunk lean during pitching and if trunk lean during pitching can be predicted from lean during the single-leg squat. Study Design Controlled Laboratory Study; Cross-sectional. Methods Seventy-three young baseball pitchers (11.4 ± 1.7 years; 156.3 ± 11.9 cm; 50.5 ± 8.8 kg) participated. An electromagnetic tracking system was used to obtain trunk kinematic data during a single-leg squat task (lead leg) and at maximum shoulder external rotation of a fastball pitch. Pearson correlation coefficients for trunk lean during the single-leg squat and pitching were calculated. A linear regression analysis was performed to determine if trunk lean during pitching can be predicted from lean during the single-leg squat. Results There was a positive correlation between trunk lean during the single-leg squat and trunk lean during pitching (r = 0.53; p<0.001). Lateral trunk lean during the single-leg squat predicted the amount of lateral trunk lean during pitching (R2 = 0.28; p < 0.001). Conclusions A moderate positive correlation was observed between trunk lean during an SLS and pitching. Trunk lean during the single-leg squat explained 28% of the variance in trunk lean during pitching. Level of Evidence Diagnosis, level 3 PMID:29484242

Matrix Metalloproteinase-9 Expression Is Enhanced in Renal Parietal Epithelial Cells of Zucker Diabetic Fatty Rats and Is Induced by Albumin in In Vitro Primary Parietal Cell Culture

PubMed Central

Zhang, Yuanyuan; George, Jasmine; Li, Yun; Olufade, Rebecca; Zhao, Xueying

2015-01-01

As a subfamily of matrix metalloproteinases (MMPs), gelatinases including MMP-2 and MMP-9 play an important role in remodeling and homeostasis of the extracellular matrix. However, conflicting results have been reported regarding their expression level and activity in the diabetic kidney. This study investigated whether and how MMP-9 expression and activity were changed in glomerular epithelial cells upon albumin overload. In situ zymography, immunostaining and Western blot for renal MMP gelatinolytic activity and MMP-9 protein expression were performed in Zucker lean and Zucker diabetic rats. Confocal microscopy revealed a focal increase in gelatinase activity and MMP-9 protein in the glomeruli of diabetic rats. Increased glomerular MMP-9 staining was mainly observed in hyperplastic parietal epithelial cells (PECs) expressing claudin-1 in the diabetic kidneys. Interestingly, increased parietal MMP-9 was often accompanied by decreased staining for podocyte markers (nephrin and podocalyxin) in the sclerotic area of affected glomeruli in diabetic rats. Additionally, urinary excretion of podocyte marker proteins was significantly increased in association with the levels of MMP-9 and albumin in the urine of diabetic animals. To evaluate the direct effect of albumin on expression and activity of MMP-9, primary cultured rat glomerular PECs were incubated with rat serum albumin (0.25 - 1 mg/ml) for 24 - 48 hrs. MMP-9 mRNA levels were significantly increased following albumin treatment. Meanwhile, albumin administration resulted in a dose-dependent increase in MMP-9 protein and activity in culture supernatants of PECs. Moreover, albumin activated p44/42 mitogen-activated protein kinase (MAPK) in PECs. Inhibition of p44/42 MAPK suppressed albumin-induced MMP-9 secretion from glomerular PECs. Taken together, we have demonstrated that an up-regulation of MMP-9 in activated parietal epithelium is associated with a loss of adjacent podocytes in progressive diabetic nephropathy

lean-ISD.

ERIC Educational Resources Information Center

Wallace, Guy W.

2001-01-01

Explains lean instructional systems design/development (ISD) as it relates to curriculum architecture design, based on Japan's lean production system. Discusses performance-based systems; ISD models; processes for organizational training and development; curriculum architecture to support job performance; and modular curriculum development. (LRW)

Branched-chain amino acid restriction in Zucker-fatty rats improves muscle insulin sensitivity by enhancing efficiency of fatty acid oxidation and acyl-glycine export.

PubMed

White, Phillip J; Lapworth, Amanda L; An, Jie; Wang, Liping; McGarrah, Robert W; Stevens, Robert D; Ilkayeva, Olga; George, Tabitha; Muehlbauer, Michael J; Bain, James R; Trimmer, Jeff K; Brosnan, M Julia; Rolph, Timothy P; Newgard, Christopher B

2016-07-01

A branched-chain amino acid (BCAA)-related metabolic signature is strongly associated with insulin resistance and predictive of incident diabetes and intervention outcomes. To better understand the role that this metabolite cluster plays in obesity-related metabolic dysfunction, we studied the impact of BCAA restriction in a rodent model of obesity in which BCAA metabolism is perturbed in ways that mirror the human condition. Zucker-lean rats (ZLR) and Zucker-fatty rats (ZFR) were fed either a custom control, low fat (LF) diet, or an isonitrogenous, isocaloric LF diet in which all three BCAA (Leu, Ile, Val) were reduced by 45% (LF-RES). We performed comprehensive metabolic and physiologic profiling to characterize the effects of BCAA restriction on energy balance, insulin sensitivity, and glucose, lipid and amino acid metabolism. LF-fed ZFR had higher levels of circulating BCAA and lower levels of glycine compared to LF-fed ZLR. Feeding ZFR with the LF-RES diet lowered circulating BCAA to levels found in LF-fed ZLR. Activity of the rate limiting enzyme in the BCAA catabolic pathway, branched chain keto acid dehydrogenase (BCKDH), was lower in liver but higher in skeletal muscle of ZFR compared to ZLR and was not responsive to diet in either tissue. BCAA restriction had very little impact on metabolites studied in liver of ZFR where BCAA content was low, and BCKDH activity was suppressed. However, in skeletal muscle of LF-fed ZFR compared to LF-fed ZLR, where BCAA content and BCKDH activity were increased, accumulation of fatty acyl CoAs was completely normalized by dietary BCAA restriction. BCAA restriction also normalized skeletal muscle glycine content and increased urinary acetyl glycine excretion in ZFR. These effects were accompanied by lower RER and improved skeletal muscle insulin sensitivity in LF-RES fed ZFR as measured by hyperinsulinemic-isoglycemic clamp. Our data are consistent with a model wherein elevated circulating BCAA contribute to development of

Evolution of insoluble eutectic Si particles in anodic oxidation films during adipic-sulfuric acid anodizing processes of ZL114A aluminum alloys

NASA Astrophysics Data System (ADS)

Hua, Lei; Liu, Jian-hua; Li, Song-mei; Yu, Mei; Wang, Lei; Cui, Yong-xin

2015-03-01

The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114A aluminum alloy substrates were investigated by optical microscopy (OM) and scanning electron microscopy (SEM). The anodic oxidation was performed at 25°C and a constant voltage of 15 V in a solution containing 50 g/L sulfuric acid and 10 g/L adipic acid. The thickness of the formed anodic oxidation film was approximately 7.13 μm. The interpore distance and the diameters of the major pores in the porous layer of the film were within the approximate ranges of 10-20 nm and 5-10 nm, respectively. Insoluble eutectic Si particles strongly influenced the morphology of the anodic oxidation films. The anodic oxidation films exhibited minimal defects and a uniform thickness on the ZL114A substrates; in contrast, when the front of the oxide oxidation films encountered eutectic Si particles, defects such as pits and non-uniform thickness were observed, and pits were observed in the films.

Development of a sleeve gastrectomy weight loss model in obese Zucker rats.

PubMed

Lopez, Peter P; Nicholson, Susannah E; Burkhardt, Gabriel E; Johnson, Robert A; Johnson, Fruzsina K

2009-12-01

Obesity promotes the development of diabetes and cardiovascular disease. The most effective weight loss treatment is bariatric surgery, but results greatly vary depending on the procedure. Sleeve gastrectomy (SG) has recently emerged as a reduced risk weight loss procedure for super obese patients. However, the mechanism of weight loss from SG and its effects on obesity-induced complications are yet to be determined. Our goal was to develop an experimental model of SG in genetically obese rats. Male obese Zucker rats (400-500 g, leptin-insensitive) were anesthetized with isoflurane. After a midline laparotomy, the stomach was clamped, the greater curvature was excised, and a triple suture line was used to close the gastric remnant. Sham rats underwent laparotomy only. Metabolic parameters were followed for 14 d after surgery. Caloric intake and body weight decreased in SG rats over 14 d by 98 +/- 10 kcal/d and 74 +/- 14 g, respectively. Blood total cholesterol levels were lower in rats that lost weight. Furthermore, blood glucose levels were lower in rats that lost weight. Active ghrelin levels were unchanged in SG rats 14 d after surgery. These results show that SG promotes weight loss in obese Zucker rats. Furthermore, SG-induced weight loss is accompanied by improved plasma cholesterol and glucose profile. However, SG does not promote a prolonged decrease in ghrelin levels. These results suggest that SG is an effective weight loss procedure in leptin insensitivity to improve the lipid profile and decrease insulin resistance and these effects might be independent of changes in ghrelin levels.

Lean leadership: an ethnographic study.

PubMed

Aij, Kjeld Harald; Visse, Merel; Widdershoven, Guy A M

2015-01-01

The purpose of this study is to provide a critical analysis of contemporary Lean leadership in the context of a healthcare practice. The Lean leadership model supports professionals with a leading role in implementing Lean. This article presents a case study focusing specifically on leadership behaviours and issues that were experienced, observed and reported in a Dutch university medical centre. This ethnographic case study provides auto-ethnographic accounts based on experiences, participant observation, interviews and document analysis. Characteristics of Lean leadership were identified to establish an understanding of how to achieve successful Lean transformation. This study emphasizes the importance for Lean leaders to go to the gemba, to see the situation for one's own self, empower health-care employees and be modest. All of these are critical attributes in defining the Lean leadership mindset. In this case study, Lean leadership is specifically related to healthcare, but certain common leadership characteristics are relevant across all fields. This article shows the value of an auto-ethnographic view on management learning for the analysis of Lean leadership. The knowledge acquired through this research is based on the first author's experiences in fulfilling his role as a health-care leader. This may help the reader examining his/her own role and reflecting on what matters most in the field of Lean leadership.

Aerobic interval exercise improves parameters of nonalcoholic fatty liver disease (NAFLD) and other alterations of metabolic syndrome in obese Zucker rats.

PubMed

Kapravelou, Garyfallia; Martínez, Rosario; Andrade, Ana M; Nebot, Elena; Camiletti-Moirón, Daniel; Aparicio, Virginia A; Lopez-Jurado, Maria; Aranda, Pilar; Arrebola, Francisco; Fernandez-Segura, Eduardo; Bermano, Giovanna; Goua, Marie; Galisteo, Milagros; Porres, Jesus M

2015-12-01

Metabolic syndrome (MS) is a group of metabolic alterations that increase the susceptibility to cardiovascular disease and type 2 diabetes. Nonalcoholic fatty liver disease has been described as the liver manifestation of MS. We aimed to test the beneficial effects of an aerobic interval training (AIT) protocol on different biochemical, microscopic, and functional liver alterations related to the MS in the experimental model of obese Zucker rat. Two groups of lean and obese animals (6 weeks old) followed a protocol of AIT (4 min at 65%-80% of maximal oxygen uptake, followed by 3 min at 50%-65% of maximal oxygen uptake for 45-60 min, 5 days/week, 8 weeks of experimental period), whereas 2 control groups remained sedentary. Obese rats had higher food intake and body weight (P < 0.0001) and suffered significant alterations in plasma lipid profile, area under the curve after oral glucose overload (P < 0.0001), liver histology and functionality, and antioxidant status. The AIT protocol reduced the severity of alterations related to glucose and lipid metabolism and increased the liver protein expression of PPARγ, as well as the gene expression of glutathione peroxidase 4 (P < 0.001). The training protocol also showed significant effects on the activity of hepatic antioxidant enzymes, although this action was greatly influenced by rat phenotype. The present data suggest that AIT protocol is a feasible strategy to improve some of the plasma and liver alterations featured by the MS.

Four-way-leaning test shows larger limits of stability than a circular-leaning test.

PubMed

Thomsen, Mikkel Højgaard; Støttrup, Nicolai; Larsen, Frederik Greve; Pedersen, Ann-Marie Sydow Krogh; Poulsen, Anne Grove; Hirata, Rogerio Pessoto

2017-01-01

Limits of stability (LOS) have extensive clinical and rehabilitational value yet no standard consensus on measuring LOS exists. LOS measured using a leaning or a circling protocol is commonly used in research and clinical settings, however differences in protocols and reliability problems exist. This study measured LOS using a four-way-leaning test and a circular-leaning test to test which showed larger LOS measurements. Furthermore, number of adaptation trials needed for consistent results was assessed. Limits of stability were measured using a force plate (Metitur Good Balance System ® ) sampling at 50Hz. Thirty healthy subjects completed 30 trials assessing LOS alternating between four-way-leaning test and circular-leaning test. A main effect of methods (ANOVA:F(1,28)=45.86, P<0.01) with the four-way-leaning test showing larger values than the circular-leaning test (NK, P<0.01). An interaction between method×directions was found (ANOVA:F(3, 84)=24.87, P<0.01). The four-way-leaning test showed larger LOS in anterior (NK, P<0.05), right (NK, P<0.01) and left direction (NK, P<0.01). Analysis of LOS for the four-way-leaning test showed a difference between trials (ANOVA:F(14,392)=7.81, P<0.01). Differences were found between trial 1 and 7 (NK, P<0.03), trial 6 and 8 (NK, P<0.02) and trial 7 and 15 (NK, P<0.02). Four-way-leaning test showed high correlation (ICC>0.87) between first and second trial for all directions. Four-way-leaning test yields larger LOS in anterior, right and left direction making it more reliable when measuring LOS. A learning effect was found up to the 8th trial, which suggests using 8 adaptation trials before reliable LOS is measured. Copyright © 2016 Elsevier B.V. All rights reserved.

Lean blowoff detection sensor

DOEpatents

Thornton, Jimmy [Morgantown, WV; Straub, Douglas L [Morgantown, WV; Chorpening, Benjamin T [Morgantown, WV; Huckaby, David [Morgantown, WV

2007-04-03

Apparatus and method for detecting incipient lean blowoff conditions in a lean premixed combustion nozzle of a gas turbine. A sensor near the flame detects the concentration of hydrocarbon ions and/or electrons produced by combustion and the concentration monitored as a function of time are used to indicate incipient lean blowoff conditions.

Lean and Information Technology Toolkit

EPA Pesticide Factsheets

The Lean and Information Technology Toolkit is a how-to guide which provides resources to environmental agencies to help them use Lean Startup, Lean process improvement, and Agile tools to streamline and automate processes.

Cull sow knife-separable lean content evaluation at harvest and lean mass content prediction equation development.

PubMed

Abell, Caitlyn E; Stalder, Kenneth J; Hendricks, Haven B; Fitzgerald, Robert F

2012-07-01

The objectives of this study were to develop a prediction equation for carcass knife-separable lean within and across USDA cull sow market weight classes (MWC) and to determine carcass and individual primal cut knife separable lean content from cull sows. There were significant percent lean and fat differences in the primal cuts across USDA MWC. The two lighter USDA MWC had a greater percent carcass lean and lower percent fat compared to the two heavier MWC. In general, hot carcass weight explained the majority of carcass lean variation. Additionally, backfat was a significant variation source when predicting cull sow carcass lean. The findings support using a single lean prediction equation across MWC to assist processors when making cull sow purchasing decisions and determine the mix of animals from various USDA MWC that will meet their needs when making pork products with defined lean:fat content. Copyright © 2012 Elsevier Ltd. All rights reserved.

LEAN thinking in Finnish healthcare.

PubMed

Jorma, Tapani; Tiirinki, Hanna; Bloigu, Risto; Turkki, Leena

2016-01-01

Purpose - The purpose of this study is to evaluate how LEAN thinking is used as a management and development tool in the Finnish public healthcare system and what kind of outcomes have been achieved or expected by using it. The main focus is in managing and developing patient and treatment processes. Design/methodology/approach - A mixed-method approach incorporating the Webropol survey was used. Findings - LEAN is quite a new concept in Finnish public healthcare. It is mainly used as a development tool to seek financial savings and to improve the efficiency of patient processes, but has not yet been deeply implemented. However, the experiences from LEAN initiatives have been positive, and the methodology is already quite well-known. It can be concluded that, because of positive experiences from LEAN, the environment in Finnish healthcare is ready for the deeper implementation of LEAN. Originality/value - This paper evaluates the usage of LEAN thinking for the first time in the public healthcare system of Finland as a development tool and a management system. It highlights the implementation and achieved results of LEAN thinking when used in the healthcare environment. It also highlights the expectations for LEAN thinking in Finnish public healthcare.

Altered susceptibility of an obese rat model to 13-week subchronic toxicity induced by 3-monochloropropane-1,2-diol.

PubMed

Toyoda, Takeshi; Cho, Young-Man; Akagi, Jun-Ichi; Mizuta, Yasuko; Matsushita, Kohei; Nishikawa, Akiyoshi; Imaida, Katsumi; Ogawa, Kumiko

2017-01-01

3-Monochloropropane-1,2-diol (3-MCPD) is a heat-induced food contaminant that has been shown to be a nongenotoxic renal carcinogen. Although the toxicity of 3-MCPD has been widely investigated for decades, there is a further concern that 3-MCPD might exert more potent toxicity in high-risk population with underlying diseases such as hyperlipidemia associated with obesity. In the present study, we performed a 13-week subchronic toxicity study for 3-MCPD using an obesity rat model to investigate the differences in susceptibility between obese and normal individuals. Male F344 and obese Zucker (lean and fatty) rats were administered 0, 9, 28.5, 90, 285, or 900 ppm 3-MCPD in drinking water for 13 weeks. 3-MCPD treatment decreased body weight gain, increased relative kidney weights, induced anemia, and induced epithelial cell necrosis in epididymal ducts in all 3 strains. The degrees of epididymal damage were higher in F344 and lean rats than in fatty rats, while renal toxicity was most potent in F344 rats and comparable in lean and fatty rats. In contrast, the hematology data indicated that anemia was worse in fatty rats than in F344 and lean rats, and a significant decrease in hematopoietic cells in the bone marrow was observed only in fatty rats. The no-observed-adverse-effect level was estimated to be 28.5 ppm in all 3 strains for 3-MCPD. These results suggested that obese Zucker rats may be more susceptible to 3-MCPD-dependent toxicity in the hematopoietic tissues than their lean counterparts.

A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

ERIC Educational Resources Information Center

De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

2015-01-01

Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

A novel anti-frictional multiphase layer produced by plasma nitriding of PVD titanium coated ZL205A aluminum alloy

NASA Astrophysics Data System (ADS)

Lu, C.; Yao, J. W.; Wang, Y. X.; Zhu, Y. D.; Guo, J. H.; Wang, Y.; Fu, H. Y.; Chen, Z. B.; Yan, M. F.

2018-02-01

The heat treatment (consisting of solid solution and aging), is integrated with the nitriding process of titanium coated ZL205A aluminum alloy to improve the surface and matrix mechanical properties simultaneously. Two-step duplex treatment is adopted to prepare the gradient multiphase layer on a magnesium-free ZL205A aluminum-copper based alloy. Firstly, pure titanium film is deposited on the aluminum alloy substrate using magnetron sputtering. Secondly, the Ti-coated specimen is nitrided at the solid solution temperature of the substrate alloying elements in a gas mixture of N2 and H2 and aged at 175 °C. The microstructure evolution, microhardness as well as the wear resistance of obtained multiphase layers are investigated by means of scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometer (EDS), microhardness tester and pin-on-disc tribometer. The multiphase layer, dominated by TiN0.3 or Al3Ti, is prepared with significantly increased layer depth after duplex treatment. The surface hardness of multiphase layer is remarkably improved from 23.7HV to 457HV. The core matrix hardness is also increased to 65HV after aging. The wear rate of the multiphase layer decreases about 55.22% and 49.28% in comparison with the aged and Ti coated specimens, respectively. The predominant wear mechanism for the multiphase layer is abrasive and oxidation, but severe adhesive wear for the aged and Ti coated specimens.

Ares Launch Vehicles Lean Practices Case Study

NASA Technical Reports Server (NTRS)

Doreswamy, Rajiv, N.; Self, Timothy A.

2008-01-01

This viewgraph presentation describes test strategies and lean philisophies and practices that are applied to Ares Launch Vehicles. The topics include: 1) Testing strategy; 2) Lean Practices in Ares I-X; 3) Lean Practices Applied to Ares I-X Schedule; 4) Lean Event Results; 5) Lean, Six Sigma, and Kaizen Practices in the Ares Projects Office; 6) Lean and Kaizen Success Stories; and 7) Ares Six Sigma Practices.

Implementing lean in Malaysian universities: Lean awareness level in an engineering faculty of a local university

NASA Astrophysics Data System (ADS)

Azim Khairi, M.; Rahman, Mohamed Abd

2018-01-01

Many academic articles were published in Malaysia promoting the goodness of lean in manufacturing and industrial sectors but less attention was apparently given to the possibility of obtaining the same universal benefits when applying lean in non-manufacturing sectors especially higher education. This study aims to determine the level of lean awareness among a local university’s community taking its Faculty of Engineering (FoE) as the case study. It also seeks to identify typical FoE’s staff perception on lean regarding its benefits and the obstacles in implementing it. A web-based survey using questionnaires was carried out for 215 respondents consisting of academic and administrative staff of the faculty. Statistical Package for the Social Science (SPSS) was used to analyze the survey data collected. A total of 13.95% of respondents returned the forms. Slightly more than half of those responded (56.7%) have encountered some of the lean terms with mean 1.43 and standard deviation 0.504. However, the large amount of standard deviation somewhat indicates that the real level of lean awareness of FoE as a group was low. In terms of lean benefits, reduction of waste was favored (93.3%) by the respondents with mean 0.93 and standard deviation 0.254. For obstacles in implementing lean, lack of knowledge was selected by most respondents (86.7%) to be the major factor with mean 0.87 and standard deviation 0.346. Through the analysis done, the study may conclude that level of lean awareness among the university‘s community was low thus may hinder implementation of lean concept.

A Web-Based Lean Simulation Game for Office Operations: Training the Other Side of a Lean Enterprise

ERIC Educational Resources Information Center

Kuriger, Glenn W.; Wan, Huang-da; Mirehei, S. Moussa; Tamma, Saumya; Chen, F. Frank

2010-01-01

This research proposes a Web-based version of a lean office simulation game (WeBLOG). The game is designed to be used to train lean concepts to office and administrative personnel. This group belongs to the frequently forgotten side of a lean enterprise. Over four phases, the game presents the following seven lean tools: one-piece flow,…

The human side of lean teams.

PubMed

Wackerbarth, Sarah B; Strawser-Srinath, Jamie R; Conigliaro, Joseph C

2015-05-01

Organizations use lean principles to increase quality and decrease costs. Lean projects require an understanding of systems-wide processes and utilize interdisciplinary teams. Most lean tools are straightforward, and the biggest barrier to successful implementation is often development of the team aspect of the lean approach. The purpose of this article is to share challenges experienced by a lean team charged with improving a hospital discharge process. Reflection on the experience provides an opportunity to highlight lessons from The Team Handbook by Peter Scholtes and colleagues. To improve the likelihood that process improvement initiatives, including lean projects, will be successful, organizations should consider providing training in organizational change principles and team building. The authors' lean team learned these lessons the hard way. Despite the challenges, the team successfully implemented changes throughout the organization that have had a positive impact. Training to understand the psychology of change might have decreased the resistance faced in implementing these changes. © 2014 by the American College of Medical Quality.

The effect of incomplete fuel-air mixing on the lean blowout limit, lean stability limit and NO(x) emissions in lean premixed gas turbine combustors

NASA Technical Reports Server (NTRS)

Shih, W.-P.; Lee, J. G.; Santavicca, D. A.

1994-01-01

Gas turbine engines for both land-based and aircraft propulsion applications are facing regulations on NOx emissions which cannot be met with current combustor technology. A number of alternative combustor strategies are being investigated which have the potential capability of achieving ultra-low NOx emissions, including lean premixed combustors, direct injection combustors, rich burn-quick quench-lean burn combustors and catalytic combustors. The research reported in this paper addresses the effect of incomplete fuel-air mixing on the lean limit performance and the NOx emissions characteristics of lean premixed combustors.

The lean service machine.

PubMed

Swank, Cynthia Karen

2003-10-01

Jefferson Pilot Financial, a life insurance and annuities firm, like many U.S. service companies at the end of the 1990s was looking for new ways to grow. Its top managers recognized that JPF needed to differentiate itself in the eyes of its customers, the independent life-insurance advisers who sell and service policies. To establish itself as these advisers' preferred partner, it set out to reduce the turnaround time on policy applications, simplify the submission process, and reduce errors. JPF's managers looked to the "lean production" practices that U.S. manufacturers adopted in response to competition from Japanese companies. Lean production is built around the concept of continuous-flow processing--a departure from traditional production systems, in which large batches are processed at each step. JPF appointed a "lean team" to reengineer its New Business unit's operations, beginning with the creation of a "model cell"--a fully functioning microcosm of JPF's entire process. This approach allowed managers to experiment and smooth out the kinks while working toward an optimal design. The team applied lean-manufacturing practices, including placing linked processes near one another, balancing employees' workloads, posting performance results, and measuring performance and productivity from the customer's perspective. Customer-focused metrics helped erode the employees' "My work is all that matters" mind-set. The results were so impressive that JPF is rolling out similar systems across many of its operations. To convince employees of the value of lean production, the lean team introduced a simulation in which teams compete to build the best paper airplane based on invented customer specifications. This game drives home lean production's basic principles, establishing a foundation for deep and far-reaching changes in the production system.

The Finnish healthcare services lean management.

PubMed

Hihnala, Susanna; Kettunen, Lilja; Suhonen, Marjo; Tiirinki, Hanna

2018-02-05

Purpose The purpose of this paper is to discuss health services managers' experiences of management in a special health-care unit and development efforts from the point of view of the Lean method. Additionally, the aim is to deepen the knowledge of the managers' work and nature of the Lean method development processes in the workplace. The research focuses on those aspects and results of Lean method that are currently being used in health-care environments. Design/methodology/approach These data were collected through a number of thematic interviews. The participants were nurse managers ( n = 7) and medical managers ( n = 7) who applied Lean management in their work at the University Hospital in the Northern Ostrobothnia Health Care District. The data were analysed with a qualitative content analysis. Findings A common set of values in specialized health-care services, development of activities and challenges for management in the use of the Lean manager development model to improve personal management skills. Practical implications Managers in specialized health-care services can develop and systematically manage with the help of the Lean method. This emphasizes assumptions, from the point of view of management, about systems development when the organization uses the Lean method. The research outcomes originate from specialized health-care settings in Finland in which the Lean method and its associated management principles have been implemented and applied to the delivery of health care. Originality/value The study shows that the research results and in-depth knowledge on Lean method principles can be applied to health-care management and development processes. The research also describes health services managers' experiences of using the Lean method. In the future, these results can be used to improve Lean management skills, identify personal professional competencies and develop skills required in development processes. Also, the research findings can be used

Impaired Expression of Neuronal Nitric Oxide Synthase in the Gracile Nucleus Is Involved in Neuropathic Changes in Zucker Diabetic Fatty Rats with and without 2,5-Hexanedione Intoxication

PubMed Central

Ma, Sheng-Xing; Peterson, Richard G.; Magee, Edward M.; Lee, Paul; Lee, Wai-Nang Paul; Li, Xi-Yan

2015-01-01

These studies examined the influence of 2,5-hexanedione (2,5-HD) intoxication on expression of neuronal nitric oxide synthase (nNOS) in the brainstem nuclei in Zucker Diabetic Fatty (ZDF) vs. lean control (LC) rats. Functional neuropathic changes were also investigated following axonal damage and impaired axonal transport induced by the treatment. Animals were intoxicated by i.p. injection of 2,5-HD plus unilateral administration of 2,5-HD over the sciatic nerve. The mechanical thresholds and withdrawal latencies to heat and cold stimuli on the foot were measured at baseline and after intoxication. The medulla sections were examined by nNOS immunohistochemistry and NADPH-diaphorase histochemistry at the end of the treatments. The mechanical thresholds and withdrawal latencies were significantly decreased while nNOS immunostained neurons and NADPH-diaphorase positive cells were selectively reduced in the gracile nucleus at baseline in ZDF vs. LC rats. NADPH-diaphorase reactivity and nNOS positive neurons were increased in the ipsilateral gracile nucleus in LC rats following 2,5-HD intoxication, but its up-regulation was attenuated in ZDF rats. These results suggest that diabetic and chemical intoxication-induced nNOS expression is selectively reduced in the gracile nucleus in ZDF rats. Impaired axonal damage-induced nNOS expression in the gracile nucleus is involved in neuropathic pathophysiology in type II diabetic rats. PMID:26519861

Lean in healthcare from employees' perspectives.

PubMed

Drotz, Erik; Poksinska, Bozena

2014-01-01

The purpose of this paper is to contribute toward a deeper understanding of the new roles, responsibilities, and job characteristics of employees in Lean healthcare organizations. The paper is based on three cases studies of healthcare organizations that are regarded as successful examples of Lean applications in the healthcare context. Data were collected by methods including interviews, observations, and document studies. The implementation of Lean in healthcare settings has had a great influence on the roles, responsibilities, and job characteristics of the employees. The focus has shifted from healthcare professionals, where clinical autonomy and professional skills have been the guarding principles of patient care, to process improvement and teamwork. Different job characteristics may make it difficult to implement certain Lean practices in healthcare. Teamwork and decentralization of authority are examples of Lean practices that could be considered countercultural because of the strong professional culture and uneven power distribution, with doctors as the dominant decision makers. Teamwork, value flow orientation, and company-wide involvement in CI were associated with positive effects on the organizations' working environment, staff development, and organizational performance. In order to succeed with Lean healthcare, it is important to understand and recognize the differences in job characteristics between Lean manufacturing and healthcare. This paper provides insights into how Lean implementation changes the roles, responsibilities, and job characteristics of healthcare staff and the challenges and implications that may follow from this.

Organizational change through Lean Thinking.

PubMed

Tsasis, Peter; Bruce-Barrett, Cindy

2008-08-01

In production and manufacturing plants, Lean Thinking has been used to improve processes by eliminating waste and thus enhancing efficiency. In health care, Lean Thinking has emerged as a comprehensive approach towards improving processes embedded in the diagnostic, treatment and care activities of health-care organizations with cost containment results. This paper provides a case study example where Lean Thinking is not only used to improve efficiency and cost containment, but also as an approach to effective organizational change.

Modelling Lean and Green Supply Chain

NASA Astrophysics Data System (ADS)

Duarte, Susana Carla Vieira Lino Medina

The success of an organization depends on the effective control of its supply chain. It is important to recognize new opportunities for organization and its supply chain. In the last few years the approach to lean, agile, resilient and green supply chain paradigms has been addressed in the scientific literature. Research in this field shows that the integration of these concepts revealed some contradictions among so many paradigms. This thesis is mainly focused on the lean and green approaches. Thirteen different management frameworks, embodied in awards, standards and tools were studied to understand if they could contribute for the modelling process of a lean and green approach. The study reveals a number of categories that are common in most management frameworks, providing adequate conditions for a lean and green supply chain transformation. A conceptual framework for the evaluation of a lean and green organization`s supply chain was proposed. The framework considers six key criteria, namely, leadership, people, strategic planning, stakeholders, processes and results. It was proposed an assessment method considering a criteria score for each criterion. The purpose is to understand how lean and green supply chain can be compatible, using principles, practices, techniques or tools (i.e. elements) that support both, a lean and a green approach, in all key criteria. A case study in the automotive upstream supply chain was performed to understand more deeply if the elements proposed for the conceptual framework could be implemented in a real-scenario. Based on the conceptual framework and the case study, a roadmap to achieve a lean-green transformation is presented. The proposed roadmap revealed its contribution to the understanding on how and when an organization`s supply chain should apply the lean and green elements. This study is relevant to practice, as it may assist managers in the adoption of a lean and green supply chain approach, giving insights for the

A prescription for Lean healthcare.

PubMed

Wood, David

2014-01-01

The adoption of Lean in the healthcare industry has been an important advancement, and not just for healthcare management. Evidence suggests that Lean can improve labour and capital efficiencies, reduce the throughput time for patients and enhance the quality of care. However, the adoption of Lean has generated large variations in results and even wider-ranging suggestions on how to implement Lean in a healthcare setting. In this article, the author examines three very similar hospitals that implemented Lean in the emergency department during the same time. Through an examination of longitudinal data and a collection of unstructured interviews, the author found that implementation does make a substantial difference to long-term results. Although the presence of strong and persistent leadership can have favourable results on performance in the short term, these performance improvements are not sustainable. To have a long-term impact, healthcare providers need to engage all of the stakeholders in the healthcare system and create a culture that is continuously focused on the improvement of the patient healthcare experience. Copyright © 2014 Longwoods Publishing.

The Lean and Environment Toolkit

EPA Pesticide Factsheets

This Lean and Environment Toolkit assembles practical experience collected by the U.S. Environmental Protection Agency (EPA) and partner companies and organizations that have experience with coordinating Lean implementation and environmental management.

Prevalence and hemodynamic effects of leaning during CPR

PubMed Central

Niles, Dana E.; Sutton, Robert M.; Nadkarni, Vinay M.; Glatz, Andrew; Zuercher, Mathias; Maltese, Matthew R.; Eilevstjønn, Joar; Abella, Benjamin S.; Becker, Lance B.; Berg, Robert A.

2013-01-01

Background Cardiopulmonary resuscitation (CPR) guidelines recommend complete release between chest compressions (CC). Objective Evaluate the hemodynamic effects of leaning (incomplete chest wall release) during CPR and the prevalence of leaning during CPR. Results In piglet ventricular fibrillation cardiac arrests, 10% and 20% (1.8 kg and 3.6 kg, respectively), leaning during CPR increased right atrial pressures, decreased coronary perfusion pressures, and decreased cardiac index and left ventricular myocardial blood flow by nearly 50%. In contrast, residual leaning of a 260 g accelerometer/ force feedback device did not adversely affect cardiac index or myocardial blood flow. Among 108 adult in-hospital CPR events, leaning ≥2.5 kg was demonstrable in 91% of the events and 12% of the evaluated CC. For 12 children with in-hospital CPR, 28% of CC had residual leaning ≥2.5 kg and 89% had residual leaning ≥0.5 kg. Conclusions Leaning during CPR increases intrathoracic pressure, decreases coronary perfusion pressure, and decreases cardiac output and myocardial blood flow. Leaning is common during CPR. PMID:22208173

Lean in Air Permitting Guide

EPA Pesticide Factsheets

The Lean in Air Permitting Guide is designed to help air program managers at public agencies better understand the potential value and results that can be achieved by applying Lean improvement methods to air permitting processes.

Rethinking Lean Service

NASA Astrophysics Data System (ADS)

Seddon, John; O'Donovan, Brendan; Zokaei, Keivan

Ever since Levitt's influential Harvard Business Review article 'Production-Line Approach to Service' was published in 1972, it has been common for services to be treated like production lines in both the academic literature and more widely in management practice. The belief that achieving economies of scale will reduce unit costs is a common feature of management decision-making. As technological advancement has produced ever more sophisticated IT and telephony, it has become increasingly easier for firms to standardise and off-shore services. The development of the 'lean' literature has only helped to emphasise the same underlying management assumptions: by managing cost and workers' activity, organisational performance is expected to improve. This chapter argues that through misinterpretation of the core paradigm 'lean' has become subsumed into the 'business as usual' of conventional service management. As a result, 'lean' has become synonymous with 'process efficiency' and the opportunity for significant performance improvement - as exemplified by Toyota - has been missed.

Lean consumption.

PubMed

Womack, James P; Jones, Daniel T

2005-03-01

During the past 20 years, the real price of most consumer goods has fallen worldwide, the variety of goods and the range of sales channels offering them have continued to grow, and product quality has steadily improved. So why is consumption often so frustrating? It doesn't have to be--and shouldn't be--the authors say. They argue that it's time to apply lean thinking to the processes of consumption--to give consumers the full value they want from goods and services with the greatest efficiency and the least pain. Companies may think they save time and money by off-loading work to the consumer but, in fact, the opposite is true. By streamlining their systems for providing goods and services, and by making it easier for customers to buy and use those products and services, a growing number of companies are actually lowering costs while saving everyone time. In the process, these businesses are learning more about their customers, strengthening consumer loyalty, and attracting new customers who are defecting from less user-friendly competitors. The challenge lies with the retailers, service providers, manufacturers, and suppliers that are not used to looking at total cost from the standpoint of the consumer and even less accustomed to working with customers to optimize the consumption process. Lean consumption requires a fundamental shift in the way companies think about the relationship between provision and consumption, and the role their customers play in these processes. It also requires consumers to change the nature of their relationships with the companies they patronize. Lean production has clearly triumphed over similar obstacles in recent years to become the dominant global manufacturing model. Lean consumption, its logical companion, can't be far behind.

A casein diet added isoflavone-enriched soy protein favorably affects biomarkers of steatohepatitis in obese Zucker rats.

PubMed

Gudbrandsen, Oddrun Anita; Wergedahl, Hege; Berge, Rolf Kristian

2009-05-01

Dietary supplementation of a soy protein enriched with isoflavones (HDI) has been shown to improve fatty liver in obese rats. The main objective of this study was to investigate whether HDI would influence the inflammatory status in livers of obese rats with fatty liver. Male obese Zucker fa/fa rats were fed casein (controls) or casein supplemented with HDI (containing 4.00 g of genistein and 4.50 g of daidzein per kilogram of diet) for 6 wk. The HDI-fed rats had a markedly lower hepatic concentration of triacylglycerol when compared with controls. The decreased aspartate transaminase/alanine transaminase ratio in plasma, together with lower circulating levels of alkaline phosphatase and bile acids after HDI feeding, implied an improved hepatitis. This was supported by decreased plasma and hepatic mRNA levels of tumor necrosis factor-alpha, lower plasma levels of interleukin-1beta and monocyte chemoattractant protein-1, and an increased anti-inflammatory fatty acid index in plasma. HDI also seemed to protect the rats from oxidative damage, because the level of lipid peroxides in triacylglycerol-rich lipoproteins after in vitro copper oxidation was lower for HDI-fed rats when compared with controls. These results show that isoflavone-enriched soy protein favorably affects biomarkers of hepatic inflammation in obese Zucker fa/fa rats with fatty liver. Thus, dietary soy proteins enriched in isoflavones may be a promising agent to improve steatohepatitis in patients.

Opuntia ficus indica (nopal) attenuates hepatic steatosis and oxidative stress in obese Zucker (fa/fa) rats.

PubMed

Morán-Ramos, Sofía; Avila-Nava, Azalia; Tovar, Armando R; Pedraza-Chaverri, José; López-Romero, Patricia; Torres, Nimbe

2012-11-01

Nonalcoholic fatty liver disease (NAFLD) is associated with multiple factors such as obesity, insulin resistance, and oxidative stress. Nopal, a cactus plant widely consumed in the Mexican diet, is considered a functional food because of its antioxidant activity and ability to improve biomarkers of metabolic syndrome. The aim of this study was to assess the effect of nopal consumption on the development of hepatic steatosis and hepatic oxidative stress and on the regulation of genes involved in hepatic lipid metabolism. Obese Zucker (fa/fa) rats were fed a control diet or a diet containing 4% nopal for 7 wk. Rats fed the nopal-containing diet had ∼50% lower hepatic TG than the control group as well as a reduction in hepatomegaly and biomarkers of hepatocyte injury such as alanine and aspartate aminotransferases. Attenuation of hepatic steatosis by nopal consumption was accompanied by a higher serum concentration of adiponectin and a greater abundance of mRNA for genes involved in lipid oxidation and lipid export and production of carnitine palmitoyltransferase-1 and microsomal TG transfer proteins in liver. Hepatic reactive oxygen species and lipid peroxidation biomarkers were significantly lower in rats fed nopal compared with the control rats. Furthermore, rats fed the nopal diet had a lower postprandial serum insulin concentration and a greater liver phosphorylated protein kinase B (pAKT):AKT ratio in the postprandial state. This study suggests that nopal consumption attenuates hepatic steatosis by increasing fatty acid oxidation and VLDL synthesis, decreasing oxidative stress, and improving liver insulin signaling in obese Zucker (fa/fa) rats.

Has Lean improved organizational decision making?

PubMed

Simons, Pascale; Benders, Jos; Bergs, Jochen; Marneffe, Wim; Vandijck, Dominique

2016-06-13

Purpose - Sustainable improvement is likely to be hampered by ambiguous objectives and uncertain cause-effect relations in care processes (the organization's decision-making context). Lean management can improve implementation results because it decreases ambiguity and uncertainties. But does it succeed? Many quality improvement (QI) initiatives are appropriate improvement strategies in organizational contexts characterized by low ambiguity and uncertainty. However, most care settings do not fit this context. The purpose of this paper is to investigate whether a Lean-inspired change program changed the organization's decision-making context, making it more amenable for QI initiatives. Design/methodology/approach - In 2014, 12 professionals from a Dutch radiotherapy institute were interviewed regarding their perceptions of a Lean program in their organization and the perceived ambiguous objectives and uncertain cause-effect relations in their clinical processes. A survey (25 questions), addressing the same concepts, was conducted among the interviewees in 2011 and 2014. The structured interviews were analyzed using a deductive approach. Quantitative data were analyzed using appropriate statistics. Findings - Interviewees experienced improved shared visions and the number of uncertain cause-effect relations decreased. Overall, more positive (99) than negative Lean effects (18) were expressed. The surveys revealed enhanced process predictability and standardization, and improved shared visions. Practical implications - Lean implementation has shown to lead to greater transparency and increased shared visions. Originality/value - Lean management decreased ambiguous objectives and reduced uncertainties in clinical process cause-effect relations. Therefore, decision making benefitted from Lean increasing QI's sustainability.

Lean in healthcare: the unfilled promise?

PubMed

Radnor, Zoe J; Holweg, Matthias; Waring, Justin

2012-02-01

In an effort to improve operational efficiency, healthcare services around the world have adopted process improvement methodologies from the manufacturing sector, such as Lean Production. In this paper we report on four multi-level case studies of the implementation of Lean in the English NHS. Our results show that this generally involves the application of specific Lean 'tools', such as 'kaizen blitz' and 'rapid improvement events', which tend to produce small-scale and localised productivity gains. Although this suggests that Lean might not currently deliver the efficiency improvements desired in policy, the evolution of Lean in the manufacturing sector also reveals this initial focus on the 'tool level'. In moving to a more system-wide approach, however, we identify significant contextual differences between healthcare and manufacturing that result in two critical breaches of the assumptions behind Lean. First, the customer and commissioner in the private sector are the one and the same, which is essential in determining 'customer value' that drives process improvement activities. Second, healthcare is predominantly designed to be capacity-led, and hence there is limited ability to influence demand or make full use of freed-up resources. What is different about this research is that these breaches can be regarded as not being primarily 'professional' in origin but actually more 'organisational' and 'managerial' and, if not addressed could severely constrain Lean's impact on healthcare productivity at the systems level. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effects of proteasome inhibitors MG132, ZL3VS and AdaAhx3L3VS on protein metabolism in septic rats

PubMed Central

Kadlčíková, Jana; Holeček, Milan; Šafránek, Roman; Tilšer, Ivan; Kessler, Benedikt M

2004-01-01

Proteasome inhibitors are novel therapeutic agents for the treatment of cancer and other severe disorders. One of the possible side effects is influencing the metabolism of proteins. The aim of our study was to evaluate the influence of three proteasome inhibitors MG132, ZL3VS and AdaAhx3L3VS on protein metabolism and leucine oxidation in incubated skeletal muscle of control and septic rats. Total proteolysis was determined according to the rates of tyrosine release into the medium during incubation. The rates of protein synthesis and leucine oxidation were measured in a medium containing L-[1-14C]leucine. Protein synthesis was determined as the amount of L-[1-14C]leucine incorporated into proteins, and leucine oxidation was evaluated according to the release of 14CO2 during incubation. Sepsis was induced in rats by means of caecal ligation and puncture. MG132 reduced proteolysis by more than 50% and protein synthesis by 10–20% in the muscles of healthy rats. In septic rats, proteasome inhibitors, except ZL3VS, decreased proteolysis in both soleus and extensor digitorum longus (EDL) muscles, although none of the inhibitors had any effect on protein synthesis. Leucine oxidation was increased by AdaAhx3L3VS in the septic EDL muscle and decreased by MG132 in intact EDL muscle. We conclude that MG132 and AdaAhx3L3VS reversed protein catabolism in septic rat muscles. PMID:15566433

Lean in healthcare: A comprehensive review.

PubMed

D'Andreamatteo, Antonio; Ianni, Luca; Lega, Federico; Sargiacomo, Massimo

2015-09-01

Lean seems to be the next revolution for a better, improved, value-based healhcare. In the last 15 years Lean has been increasingly adapted and adopted in healthcare. Accordingly, Lean healthcare has been developing into a major strand of research since the early 2000s. The aim of this work is to present a comprehensive overview of the main issues highlighted by research on implementation of Lean in a complex contest such as the healthcare one. Comprehensive literature review was conducted in order to identify empirical and theoretical articles published up to September 2013. Thematic analysis was performed in order to extract and synthesis data. 243 articles were selected for analysis. Lean is best understood as a means to increase productivity. Hospital is the more explored setting, with emergency and surgery as the pioneer departments. USA appears to be the leading country for number of applications. The theoretical works have been focused mainly on barriers, challenges and success factors. Sustainability, framework for measurement and critical appraisal remain underestimated themes. Evaluations of "system wide approach" are still low in number. Even though Lean results appear to be promising, findings so far do not allow to draw a final word on its positive impacts or challenges when introduced in the healthcare sector. Scholars are called to explore further the potentiality and the weaknesses of Lean, above all as for the magnitude of investments required and for the engagement of the whole organization it represents increasingly strategic choice, whilst health professionals, managers and policy makers could and should learn from research how to play a pivotal role for a more effective implementation of lean in different health contexts. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Lean Management Systems in Radiology: Elements for Success.

PubMed

Schultz, Stacy R; Ruter, Royce L; Tibor, Laura C

2016-01-01

This article is a review of the literature on Lean and Lean Management Systems and how they have been implemented in healthcare organizations and particularly in radiology departments. The review focuses on the elements required for a successful implementation of Lean by applying the principles of a Lean Management System instead of a Lean tools-only approach. This review shares the successes and failures from healthcare organizations' efforts to improve the quality and safety of the services they provide. There are a limited number of healthcare organizations in the literature who have shared their experiences and additional research is necessary to determine whether a Lean Management System is a viable alternative to the current management structure in healthcare.

Lean practices for quality results: a case illustration.

PubMed

Hwang, Pauline; Hwang, David; Hong, Paul

2014-01-01

Increasingly, healthcare providers are implementing lean practices to achieve quality results. Implementing lean healthcare practices is unique compared to manufacturing and other service industries. The purpose of this paper is to present a model that identifies and defines the lean implementation key success factors in healthcare organisations. The model is based on an extant literature review and a case illustration that explores actual lean implementation in a major USA hospital located in a Midwestern city (approximately 300,000 people). An exploratory/descriptive study using observation and follow-up interviews was conducted to identify lean practices in the hospital. Lean practice key drivers include growing elderly populations, rising medical expenses, decreasing insurance coverage and decreasing management support. Effectively implementing lean practices to increase bottom-line results and improve organisational integrity requires sharing goals and processes among healthcare managers and professionals. An illustration explains the model and the study provides a sound foundation for empirical work. Practical implications are included. Lean practices minimise waste and unnecessary hospital stays while simultaneously enhancing customer values and deploying resources in supply systems. Leadership requires clear project targets based on sound front-end planning because initial implementation steps involve uncertainty and ambiguity (i.e. fuzzy front-end planning). Since top management support is crucial for implementing lean practices successfully, a heavyweight manager, who communicates well both with top managers and project team members, is an important success factor when implementing lean practices. Increasingly, green orientation and sustainability initiatives are phrases that replaced lean practices. Effective results; e.g. waste reduction, employee satisfaction and customer values are applicable to bigger competitive challenges arising both in specific

Lean premixed/prevaporized combustion

NASA Technical Reports Server (NTRS)

Lefebvre, A. H. (Editor)

1977-01-01

Recommendations were formulated on the status and application of lean premixed/prevaporized combustion to the aircraft gas turbine for the reduction of pollutant emissions. The approach taken by the NASA Stratospheric Cruise Emission Reduction Program (SCERP) in pursuing the lean premixed/prevaporized combustion technique was also discussed. The proceedings contains an overview of the SCERP program, the discussions and recommendations of the participants, and an overall summary.

Improving healthcare using Lean processes.

PubMed

Baker, G Ross

2014-01-01

For more than a decade, healthcare organizations across Canada have been using Lean management tools to improve care processes, reduce preventable adverse events, increase patient satisfaction and create better work environments. The largest system-wide effort in Canada, and perhaps anywhere, is currently under way in Saskatchewan. The jury is still out on whether Lean efforts in that province, or elsewhere in Canada, are robust enough to transform current delivery systems and sustain new levels of performance. This issue of Healthcare Quarterly features several articles that provide a perspective on Lean methods in healthcare. Copyright © 2014 Longwoods Publishing.

Using Dynamic Value Stream Mapping and Lean Accounting Box Scores to Support Lean Implementation

ERIC Educational Resources Information Center

Woehrle, Stephen L.; Abou-Shady, Louay

2010-01-01

Lean has proven to be an effective management philosophy for improving businesses in a competitive market by eliminating waste and improving operations. An impact of implementing lean projects is the rapid reduction in inventory levels, which gives management the false impression that profits are decreasing while workers on the shop floor observe…

Lean leadership attributes: a systematic review of the literature.

PubMed

Aij, Kjeld Harald; Teunissen, Maurits

2017-10-09

Purpose Emphasis on quality and reducing costs has led many health-care organizations to reconfigure their management, process, and quality control infrastructures. Many are lean, a management philosophy with roots in manufacturing industries that emphasizes elimination of waste. Successful lean implementation requires systemic change and strong leadership. Despite the importance of leadership to successful lean implementation, few researchers have probed the question of ideal leadership attributes to achieve lean thinking in health care. The purpose of this paper is to provide insight into applicable attributes for lean leaders in health care. Design/methodology/approach The authors systematically reviewed the literature on principles of leadership and, using Dombrowski and Mielke's (2013) conceptual model of lean leadership, developed a parallel theoretical model for lean leadership in health care. Findings This work contributes to the development of a new framework for describing leadership attributes within lean management of health care. Originality/value The summary of attributes can provide a model for health-care leaders to apply lean in their organizations.

Lean Six Sigma implementation and organizational culture.

PubMed

Knapp, Susan

2015-01-01

The purpose of this paper is to examine the relationship between four organizational cultural types defined by the Competing Values Framework and three Lean Six Sigma implementation components - management involvement, use of Lean Six Sigma methods and Lean Six Sigma infrastructure. The study involved surveying 446 human resource and quality managers from 223 hospitals located in Maine, New Hampshire, Vermont, Massachusetts and Rhode Island using the Organizational Culture Assessment Instrument. Findings - In total, 104 completed responses were received and analyzed using multivariate analysis of variance. Follow-up analysis of variances showed management support was significant, F(3, 100)=4.89, p < 0.01, η2=1.28; infrastructure was not significant, F(3, 100)=1.55, p=0.21, η2=0.05; and using Lean Six Sigma methods was also not significant, F(3, 100)=1.34, p=0.26, η2=0.04. Post hoc analysis identified group and development cultures having significant interactions with management support. The relationship between organizational culture and Lean Six Sigma in hospitals provides information on how specific cultural characteristics impact the Lean Six Sigma initiative key components. This information assists hospital staff who are considering implementing quality initiatives by providing an understanding of what cultural values correspond to effective Lean Six Sigma implementation. Managers understanding the quality initiative cultural underpinnings, are attentive to the culture-shared values and norm's influence can utilize strategies to better implement Lean Six Sigma.

Clinically lean; "cutting the crap".

PubMed

Caldwell, G

2012-01-01

Proponents of Lean Philosophy believe that successful businesses must reduce waste in working time and resources to a minimum, and maximise their use in productive work. The productive work of the Acute Medical Unit is to provide effective clinical management to a daily cohort of acutely ill patients. Many Clinicians are cynical about Lean. In this article, Dr Caldwell discusses how many clinicians complain of too much crap in the workplace, which gets in the way of swift, safe high quality clinical care. He argues that "Cutting the Crap" in the Acute Medical Unit is entirely consistent with Lean approaches to management of complex systems.

The promise of Lean in health care.

PubMed

Toussaint, John S; Berry, Leonard L

2013-01-01

An urgent need in American health care is improving quality and efficiency while controlling costs. One promising management approach implemented by some leading health care institutions is Lean, a quality improvement philosophy and set of principles originated by the Toyota Motor Company. Health care cases reveal that Lean is as applicable in complex knowledge work as it is in assembly-line manufacturing. When well executed, Lean transforms how an organization works and creates an insatiable quest for improvement. In this article, we define Lean and present 6 principles that constitute the essential dynamic of Lean management: attitude of continuous improvement, value creation, unity of purpose, respect for front-line workers, visual tracking, and flexible regimentation. Health care case studies illustrate each principle. The goal of this article is to provide a template for health care leaders to use in considering the implementation of the Lean management system or in assessing the current state of implementation in their organizations. Copyright © 2013 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

Lean sigma--will it work for healthcare?

PubMed

Bahensky, James A; Roe, Janet; Bolton, Romy

2005-01-01

The manufacturing industry has been using Lean Sigma for years in pursuit of continuous improvement to obtain a competitive advantage. The objectives of these efforts are to use the Lean techniques for reducing cycle times and the Six Sigma concepts for reducing product defects. The Iowa Business Council with several advocates worked with the University of Iowa Hospital and Clinics (UIHC) and two other Iowa hospitals to determine whether Lean Sigma is adaptable in healthcare. A team of 15 people at UIHC used the Kaizen Breakthrough Methodology over a five-day period in an aggressive identification and elimination of non-value added activities in Radiology CT scanning. The results exceeded the initial project objectives and indicated that Lean Sigma is applicable in healthcare. Overall, the Lean Sigma project increased revenue by approximately $750,000 per year. The Kaizen process proved to be successful and interesting. Within three days, the team installed new work flow processes. This implementation-oriented approach is what differentiates Lean Sigma from other quality improvement processes.

Can lean save lives?

PubMed

Fillingham, David

2007-01-01

The purpose of this paper is to show how over the last 18 months Bolton Hospitals NHS Trust have been exploring whether or not lean methodologies, often known as the Toyota Production System, can indeed be applied to healthcare. This paper is a viewpoint. One's early experience is that lean really can save lives. The Toyota Production System is an amazingly successful way of manufacturing cars. It cannot be simply translated unthinkingly into a hospital but lessons can be learned from it and the method can be adapted and developed so that it becomes owned by healthcare staff and focused towards the goal of improved patient care. Working in healthcare is a stressful and difficult thing. Everyone needs a touch of inspiration and encouragement. Applying lean to healthcare in Bolton seems to be achieving just that for those who work there.

Obesity-stimulated aldosterone release is not related to an S1P-dependent mechanism.

PubMed

Werth, Stephan; Müller-Fielitz, Helge; Raasch, Walter

2017-12-01

Aldosterone has been identified as an important factor in obesity-associated hypertension. Here, we investigated whether sphingosine-1-phosphate (S1P), which has previously been linked to obesity, increases aldosterone release. S1P-induced aldosterone release was determined in NCI H295R cells in the presence of S1P receptor (S1PR) antagonists. In vivo release of S1P (100-300 µg/kg bw ) was investigated in pithed, lean Sprague Dawley (SD) rats, diet-obese spontaneous hypertensive rats (SHRs), as well as in lean or obese Zucker rats. Aldosterone secretion was increased in NCI H295R cells by S1P, the selective S1PR1 agonist SEW2871 and the selective S1PR2 antagonist JTE013. Treatment with the S1PR1 antagonist W146 or fingolimod and the S1PR1/3 antagonist VPbib2319 decreased baseline and/or S1P-stimulated aldosterone release. Compared to saline-treated SD rats, plasma aldosterone increased by ~50 pg/mL after infusing S1P. Baseline levels of S1P and aldosterone were higher in obese than in lean SHRs. Adrenal S1PR expression did not differ between chow- or CD-fed rats that had the highest S1PR1 and lowest S1PR4 levels. S1P induced a short-lasting increase in plasma aldosterone in obese, but not in lean SHRs. However, 2-ANOVA did not demonstrate any difference between lean and obese rats. S1P-induced aldosterone release was also similar between obese and lean Zucker rats. We conclude that S1P is a local regulator of aldosterone production. S1PR1 agonism induces an increase in aldosterone secretion, while stimulating adrenal S1PR2 receptor suppresses aldosterone production. A significant role of S1P in influencing aldosterone secretion in states of obesity seems unlikely. © 2017 Society for Endocrinology.

[Four awareness of clinical lean management].

PubMed

Xiong, L Z; Zhang, C F

2017-01-20

Along with changes of medical model, hospitals need to provide best outcome with lowest cost and best patient's experience rather than merely medical treatments. It is the cultivation of lean awareness to the doctors that could acquire such outcome. The healthcare lean awareness can be summarized as responsibility awareness, digitalized awareness, detail awareness, and outstanding awareness. Through the cultivation of lean awareness, humanism can immerse into the doctors'practice, which is conducive to train for the great masters of the medicine.

Incorporation of lean methodology into pharmacy residency programs.

PubMed

John, Natalie; Snider, Holly; Edgerton, Lisa; Whalin, Laurie

2017-03-15

The implementation of lean methodology into pharmacy residency programs at a community teaching hospital is described. New Hanover Regional Medical Center, a community teaching hospital in southeastern North Carolina, fully adopted a lean culture in 2010. Given the success of lean strategies organizationally, this methodology was used to assist with the evaluation and development of its pharmacy residency programs in 2014. Lean tools and activities have also been incorporated into residency requirements and rotation learning activities. The majority of lean events correspond to the required competency areas evaluating leadership and management, teaching, and education. These events have included participation in and facilitation of various lean problem-solving and communication tools. The application of the 4 rules of lean has resulted in enhanced management of the programs and provides a set of tools by which continual quality improvement can be ensured. Regular communication and direct involvement of all invested parties have been critical in developing and sustaining new improvements. In addition to program enhancements, lean methodology offers novel methods by which residents may be incorporated into leadership activities. The incorporation of lean methodology into pharmacy residency programs has translated into a variety of realized and potential benefits for the programs, the preceptors and residents, and the health system. Specific areas of growth have included quality-improvement processes, the expansion of leadership opportunities for residents, and improved communication among program directors, preceptors, and residents. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Lean management in academic surgery.

PubMed

Collar, Ryan M; Shuman, Andrew G; Feiner, Sandra; McGonegal, Amy K; Heidel, Natalie; Duck, Mary; McLean, Scott A; Billi, John E; Healy, David W; Bradford, Carol R

2012-06-01

Lean is a management system designed to enhance productivity by eliminating waste. Surgical practice offers many opportunities for improving efficiency. Our objective was to determine whether systematic implementation of lean thinking in an academic otolaryngology operating room improves efficiency and profitability and preserves team morale and educational opportunities. In an 18-month prospective quasi-experimental study, a multidisciplinary task force systematically implemented lean thinking within an otolaryngology operating room of an academic health system. Operating room turnover time and turnaround time were measured during a baseline period; an observer-effect period in which workers were made aware that their efficiency was being measured but before implementing lean changes; and an intervention period after redesign principles had been used. The impact on teamwork, morale, and surgical resident education were measured during the baseline and intervention periods through validated surveys. A profit model was applied to estimate the financial implications of the study. There was no difference between the baseline and observer-effect periods of the study for turnover time (p = 0.98) or turnaround time (p = 0.20). During the intervention period, the mean turnover time and turnaround time were significantly shorter than during the baseline period (29 vs 38 minutes; p < 0.001 and 69 vs 89 minutes; p < 0.001, respectively). The composite morale score suggested improved morale after implementation (p = 0.011). Educational metrics were unchanged before and after implementation. The annual opportunity revenue for the involved operating room is $330,000; when extrapolated throughout the operating rooms, lean thinking could create 6,500 hours of capacity annually. Application of lean management techniques to a single operating room and surgical service improved operating room efficiency and morale, sustained resident education, and can provide considerable financial

Effects of antiglucocorticoid RU 486 on development of obesity in obese fa/fa Zucker rats.

PubMed

Langley, S C; York, D A

1990-09-01

The effects of RU 486 (mitepristone), an antagonist of type II glucocorticoid receptors (GR), on the development of obesity in young 5-wk-old obese fa/fa rats has been investigated. After 15 days of treatment, body composition of obese RU 486-treated rats was similar to that of lean-vehicle rats. Analysis of body composition changes showed that RU 486 effectively reversed the obesity. It stopped fat deposition in obese rats but increased protein deposition to the level of lean-vehicle rats. RU 486 prevented the development of hyperphagia and reduced gross energetic efficiency in the obese rats but had little effect on lean rats. Brown adipose tissue mitochondrial GDP binding was increased in obese rats but was reduced in lean rats by RU 486 treatment. RU 486 also reduced the elevated activity of hippocampal glycerophosphate dehydrogenase, a glucocorticoid-responsive enzyme, of obese rats to the level of lean rats. The evidence suggests that abnormal activity of glucocorticoid GR receptors or abnormal cellular responsiveness to corticosterone receptor complexes may be important in the development of obesity in the fa/fa rat.

Diets containing salmon fillet delay development of high blood pressure and hyperfusion damage in kidneys in obese Zucker fa/fa rats.

PubMed

Vikøren, Linn A; Drotningsvik, Aslaug; Mwakimonga, Angela; Leh, Sabine; Mellgren, Gunnar; Gudbrandsen, Oddrun A

2018-04-01

Hypertension is the leading risk factor for cardiovascular and chronic renal diseases, affecting more than 1 billion people. Fish intake is inversely correlated with the prevalence of hypertension in several, but not all, studies, and intake of fish oil and fish proteins has shown promising potential to delay development of high blood pressure in rats. The effects of baked and raw salmon fillet intake on blood pressure and renal function were investigated in obese Zucker fa/fa rats, which spontaneously develop hypertension with proteinuria and renal failure. Rats were fed diets containing baked or raw salmon fillet in an amount corresponding to 25% of total protein from salmon and 75% of protein from casein, or casein as the sole protein source (control group) for 4 weeks. Results show lower blood pressure and lower urine concentrations of albumin and cystatin C (relative to creatinine) in salmon diet groups when compared to control group. Morphological examinations revealed less prominent hyperfusion damage in podocytes from rats fed diets containing baked or raw salmon when compared to control rats. In conclusion, diets containing baked or raw salmon fillet delayed the development of hypertension and protected against podocyte damage in obese Zucker fa/fa rats. Copyright © 2018 American Heart Association. Published by Elsevier Inc. All rights reserved.

Why Lean doesn't work for everyone.

PubMed

Kaplan, Gary S; Patterson, Sarah H; Ching, Joan M; Blackmore, C Craig

2014-12-01

Popularisation of Lean in healthcare has led to emphasis on Lean quality improvement tools in isolation, with inconsistent results. We argue that delivery of safer, more efficient, and higher quality-patient focused care requires organisational transformation of which the Lean toolkit is only one component. To successfully facilitate system transformation toward higher quality care at lower cost, Lean tools must be part of a comprehensive management system, within a supportive institutional culture, and with committed leadership. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Postural Stability When Leaning from Perceived Upright

NASA Technical Reports Server (NTRS)

Vanya, Robert D.; Grounds, John F.; Wood, Scott J.

2011-01-01

The transition between quiet stance and gait requires the volitional movement of one?s center of mass (COM) toward a limit of stability (LOS). The goal of this study was to measure the effect of leaning from perceived upright on postural stability when voluntarily maintaining fixed stance positions and during perturbations of the support surface. The COM was derived from force plate data in 12 healthy subjects while standing with feet positioned so that lateral base of support was equal to foot length. For all conditions, arms were folded and subjects were instructed to lean without bending at the hips or lifting their feet. The LOS was determined during maximal voluntary leans with eyes open and closed. The COM was then displayed on a monitor located in front of the subject. Subjects were visually guided to lean toward a target position, maintain this position for 10s, return to upright, and then repeat the same targeted lean maneuver with eyes closed. Targets were randomly presented at 2? in 8 directions and between 2-6? in these same directions according to the asymmetric LOS. Subjects were then verbally guided to lean between 2? back and 4? forward prior to a perturbation of the support surface in either a forward or backward direction. The average LOS was 5.8? forward, 2.9? back, and 4.8? in left/right directions, with no significant difference between eyes open and closed. Center of pressure (COP) velocity increased as subjects maintained fixed stance positions farther from upright, with increased variability during eyes closed conditions. The time to stability and COP path length increased as subjects leaned opposite to the direction of the support surface perturbations. We conclude that postural stability is compromised as subjects lean away from perceived upright, except for perturbations that induce sway in the direction opposite the lean. The asymmetric LOS relative to perceived upright favors postural stability for COM movements in the forward direction.

Application of lean manufacturing techniques in the Emergency Department.

PubMed

Dickson, Eric W; Singh, Sabi; Cheung, Dickson S; Wyatt, Christopher C; Nugent, Andrew S

2009-08-01

"Lean" is a set of principles and techniques that drive organizations to continually add value to the product they deliver by enhancing process steps that are necessary, relevant, and valuable while eliminating those that fail to add value. Lean has been used in manufacturing for decades and has been associated with enhanced product quality and overall corporate success. To evaluate whether the adoption of Lean principles by an Emergency Department (ED) improves the value of emergency care delivered. Beginning in December 2005, we implemented a variety of Lean techniques in an effort to enhance patient and staff satisfaction. The implementation followed a six-step process of Lean education, ED observation, patient flow analysis, process redesign, new process testing, and full implementation. Process redesign focused on generating improvement ideas from frontline workers across all departmental units. Value-based and operational outcome measures, including patient satisfaction, expense per patient, ED length of stay (LOS), and patient volume were compared for calendar year 2005 (pre-Lean) and periodically after 2006 (post-Lean). Patient visits increased by 9.23% in 2006. Despite this increase, LOS decreased slightly and patient satisfaction increased significantly without raising the inflation adjusted cost per patient. Lean improved the value of the care we delivered to our patients. Generating and instituting ideas from our frontline providers have been the key to the success of our Lean program. Although Lean represents a fundamental change in the way we think of delivering care, the specific process changes we employed tended to be simple, small procedure modifications specific to our unique people, process, and place. We, therefore, believe that institutions or departments aspiring to adopt Lean should focus on the core principles of Lean rather than on emulating specific process changes made at other institutions.

Defective glycogenesis contributes toward the inability to suppress hepatic glucose production in response to hyperglycemia and hyperinsulinemia in zucker diabetic fatty rats.

PubMed

Torres, Tracy P; Fujimoto, Yuka; Donahue, E P; Printz, Richard L; Houseknecht, Karen L; Treadway, Judith L; Shiota, Masakazu

2011-09-01

Examine whether normalizing net hepatic glycogenesis restores endogenous glucose production and hepatic glucose phosphorylation in response to diabetic levels of plasma glucose and insulin in Zucker diabetic fatty rats (ZDF). Hepatic glucose and intermediate fluxes (µmol · kg(-1) · min(-1)) were measured with and without a glycogen phosphorylase inhibitor (GPI) using [2-(3)H]glucose, [3-(3)H]glucose, and [U-(14)C]alanine in 20 h-fasted conscious ZDF and their lean littermates (ZCL) under clamp conditions designed to maintain diabetic levels of plasma glucose and insulin. With infusion of GPI into ZDF (ZDF-GPI+G), compared with vehicle infused ZDF (ZDF-V), high glycogen phosphorylase a activity was decreased and low synthase I activity was increased to that of ZCL. Low net glycogenesis from plasma glucose rose to 75% of ZCL levels (4 ± 1 in ZDF-V, 18 ± 1 in ZDF-GPI+G, and 24 ± 2 in ZCL) and phosphoenolpyruvate 260% (4 ± 2 in ZDF-V, 16 ± 1 in ZDF+GPI-G, and 6 ± 2 in ZCL). High endogenous glucose production was suppressed with GPI infusion but not to that of ZCL (46 ± 4 in ZDF-V, 18 ± 4 in ZDF-GPI+G, and -8 ± 3 in ZCL). This was accompanied by reduction of the higher glucose-6-phosphatase flux (75 ± 4 in ZDF-V, 41 ± 4 in ZDF-GPI+G, and 86 ± 12 in ZCL) and no change in low glucose phosphorylation or total gluconeogenesis. In the presence of hyperglycemic-hyperinsulinemia in ZDF, reduced glycogenic flux partially contributes to a lack of suppression of hepatic glucose production by failing to redirect glucose-6-phosphate flux from production of glucose to glycogen but is not responsible for a lower rate of glucose phosphorylation.

Quality improvement in basic histotechnology: the lean approach.

PubMed

Clark, David

2016-01-01

Lean is a comprehensive system of management based on the Toyota production system (TPS), encompassing all the activities of an organization. It focuses management activity on creating value for the end-user by continuously improving operational effectiveness and removing waste. Lean management creates a culture of continuous quality improvement with a strong emphasis on developing the problem-solving capability of staff using the scientific method (Deming's Plan, Do, Check, Act cycle). Lean management systems have been adopted by a number of histopathology departments throughout the world to simultaneously improve quality (reducing errors and shortening turnround times) and lower costs (by increasing efficiency). This article describes the key concepts that make up a lean management system, and how these concepts have been adapted from manufacturing industry and applied to histopathology using a case study of lean implementation and evidence from the literature. It discusses the benefits, limitations, and pitfalls encountered when implementing lean management systems.

Lean in service industries: A literature review

NASA Astrophysics Data System (ADS)

V, Vignesh; Suresh, M.; Aramvalarthan, S.

2016-09-01

Lean service is an amalgamation of tools and practices which, if applied appropriately, would definitely improve the existing quality of operations and ensure the generation of a large amount of favourable financial and economic outcomes and improve the behaviour of the workforce. As a result, it assumes of great significance in the fiercely competitive modern world. This article presents a comprehensive bibliographic study about the various lean service practices through a variety of approaches like service improvement, manufacturing, supply chain, market and retailing approaches, etc. Thus it gives a clear view on how the lean services are implemented in various sectors and the contribution of lean service towards improving the quality in the services provided while reducing the costs.

Getting 'Lean': hardwiring process excellence into Northeast Health.

PubMed

Brown, Tricia; Duthe, Robert

2009-01-01

Many healthcare organizations are turning to the "Lean" Toyota Production System as a means to hardwire process excellence into their organizations. Northeast Health, an integrated delivery system in New York's capital region, introduced the Lean concept into its culture in 2004. After four years, the organization is beginning to see its staff hardwire Lean thinking into day-to-day behaviors. This paper focuses on the approach used by Northeast Health to introduce Lean concepts into its culture, challenges faced, lessons learned and the factors critical to success.

Serum Predictors of Percent Lean Mass in Young Adults.

PubMed

Lustgarten, Michael S; Price, Lori L; Phillips, Edward M; Kirn, Dylan R; Mills, John; Fielding, Roger A

2016-08-01

Lustgarten, MS, Price, LL, Phillips, EM, Kirn, DR, Mills, J, and Fielding, RA. Serum predictors of percent lean mass in young adults. J Strength Cond Res 30(8): 2194-2201, 2016-Elevated lean (skeletal muscle) mass is associated with increased muscle strength and anaerobic exercise performance, whereas low levels of lean mass are associated with insulin resistance and sarcopenia. Therefore, studies aimed at obtaining an improved understanding of mechanisms related to the quantity of lean mass are of interest. Percent lean mass (total lean mass/body weight × 100) in 77 young subjects (18-35 years) was measured with dual-energy x-ray absorptiometry. Twenty analytes and 296 metabolites were evaluated with the use of the standard chemistry screen and mass spectrometry-based metabolomic profiling, respectively. Sex-adjusted multivariable linear regression was used to determine serum analytes and metabolites significantly (p ≤ 0.05 and q ≤ 0.30) associated with the percent lean mass. Two enzymes (alkaline phosphatase and serum glutamate oxaloacetate aminotransferase) and 29 metabolites were found to be significantly associated with the percent lean mass, including metabolites related to microbial metabolism, uremia, inflammation, oxidative stress, branched-chain amino acid metabolism, insulin sensitivity, glycerolipid metabolism, and xenobiotics. Use of sex-adjusted stepwise regression to obtain a final covariate predictor model identified the combination of 5 analytes and metabolites as overall predictors of the percent lean mass (model R = 82.5%). Collectively, these data suggest that a complex interplay of various metabolic processes underlies the maintenance of lean mass in young healthy adults.

Teaching Special Decisions in a Lean Accounting Environment

ERIC Educational Resources Information Center

Haskin, Daniel

2010-01-01

Lean accounting has become increasingly important as more and more companies adopt the lean enterprise model or some variation of it. Cost and managerial accounting textbooks continue to use, almost exclusively, models based on standard overhead absorption, which if used in a lean environment will not accurately reflect the benefits from the…

Development of framework for sustainable Lean implementation: an ISM approach

NASA Astrophysics Data System (ADS)

Jadhav, Jagdish Rajaram; Mantha, S. S.; Rane, Santosh B.

2014-07-01

The survival of any organization depends upon its competitive edge. Even though Lean is one of the most powerful quality improvement methodologies, nearly two-thirds of the Lean implementations results in failures and less than one-fifth of those implemented have sustained results. One of the most significant tasks of top management is to identify, understand and deploy the significant Lean practices like quality circle, Kanban, Just-in-time purchasing, etc. The term `bundle' is used to make groups of inter-related and internally consistent Lean practices. Eight significant Lean practice bundles have been identified based on literature reviewed and opinion of the experts. The order of execution of Lean practice bundles is very important. Lean practitioners must be able to understand the interrelationship between these practice bundles. The objective of this paper is to develop framework for sustainable Lean implementation using interpretive structural modelling approach.

Effect of Roux-en-Y gastric bypass and diet-induced weight loss on diabetic kidney disease in the Zucker diabetic fatty rat.

PubMed

Neff, Karl J; Elliott, Jessie A; Corteville, Caroline; Abegg, Kathrin; Boza, Camilo; Lutz, Thomas A; Docherty, Neil G; le Roux, Carel W

2017-01-01

Reductions in urinary protein excretion after Roux-en-Y gastric bypass (RYGB) surgery in patients with diabetic kidney disease have been reported in multiple studies. To determine the weight loss dependence of the effect of RYGB on urinary protein excretion by comparing renal outcomes in Zucker diabetic fatty rats undergoing either gastric bypass surgery or a sham operation with or without weight matching. University laboratories. Zucker diabetic fatty rats underwent surgery at 18 weeks of age. A subgroup of sham operated rats were weight matched to RYGB operated rats by restricting food intake. Urinary protein excretion was assessed at baseline and at postoperative weeks 4 and 12. Renal histology and macrophage-associated inflammation were assessed at postoperative week 12. Progressive urinary protein excretion was attenuated by both RYGB and diet-induced weight loss, albeit to a lesser extent by the latter. Both weight loss interventions produced equivalent reductions in glomerulomegaly, glomerulosclerosis, and evidence of renal macrophage infiltration. Weight loss per se improves renal structure and attenuates renal inflammatory responses in an experimental animal model of diabetic kidney disease. Better glycemic control post-RYGB may in part explain the greater reductions in urinary protein excretion after gastric bypass surgery. Copyright © 2017 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Application of lean thinking to health care: issues and observations

PubMed Central

Joosten, Tom; Bongers, Inge; Janssen, Richard

2009-01-01

Background Incidents and quality problems are a prime cause why health care leaders are calling to redesign health care delivery. One of the concepts used is lean thinking. Yet, lean often leads to resistance. Also, there is a lack of high quality evidence supporting lean premises. In this paper, we present an overview of lean thinking and its application to health care. Development, theory and application of lean thinking to health care Lean thinking evolved from a tool designed to improve operational shop-floor performance at an automotive manufacturer to a management approach with both operational and sociotechnical aspects. Sociotechnical dynamics have until recently not received much attention. At the same time a balanced approach might lead to a situation where operational and sociotechnial improvements are mutually reinforcing. Application to health care has been limited and focussed mainly on operational aspects using original lean tools. A more integrative approach would be to pay more attention to sociotechnical dynamics of lean implementation efforts. Also, the need to use the original lean tools may be limited, because health care may have different instruments and tools already in use that are in line with lean thinking principles. Discussion We believe lean thinking has the potential to improve health care delivery. At the same time, there are methodological and practical considerations that need to be taken into account. Otherwise, lean implementation will be superficial and fail, adding to existing resistance and making it more difficult to improve health care in the long term. PMID:19696048

Lean limit phenomena

NASA Technical Reports Server (NTRS)

Law, C. K.

1984-01-01

The concept of flammability limits in the presence of flame interaction, and the existence of negative flame speeds are discussed. Downstream interaction between two counterflow premixed flames of different stoichiometries are experimentally studied. Various flame configurations are observed and quantified; these include the binary system of two lean or rich flames, the triplet system of a lean and a rich flame separated by a diffusion flame, and single diffusion flames with some degree of premixedness. Extinction limits are determined for methane/air and butane/air mixtures over the entire range of mixture concentrations. The results show that the extent of flame interaction depends on the separation distance between the flames which are functions of the mixtures' concentrations, the stretch rate, and the effective Lewis numbers (Le). In particular, in a positively-stretched flow field Le 1 ( 1) mixtures tend to interact strongly (weakly), while the converse holds for flames in a negatively-stretched flow. Also established was the existence of negative flames whose propagation velocity is in the same general direction as that of the bulk convective flow, being supported by diffusion alone. Their existence demonstrates the tendency of flames to resist extinction, and further emphasizes the possibility of very lean or rich mixtures to undergo combustion.

Using Simulation to Explore Lean Manufacturing Implementation Strategies

ERIC Educational Resources Information Center

Shannon, Patrick W.; Krumwiede, Kip R.; Street, Jeffrey N.

2010-01-01

Lean manufacturing, an outgrowth of the Toyota Production System, has spread far beyond the automobile industry and is seen by many leaders as a key management philosophy in the battle to compete on an international scale. Successful implementation of lean requires that managers and employees be educated in the proper application of lean tools and…

Learning Lean: A Survey of Industry Lean Needs

ERIC Educational Resources Information Center

Fliedner, Gene; Mathieson, Kieran

2009-01-01

The authors examined business practitioners' preferences for higher education curricula design in general and for what graduates should know about Lean, or waste-reduction efforts. The authors conducted a Web-based survey and found that practitioners are not as concerned about graduates' possessing specific technical skills as they are about them…

Mangiferin protects against adverse skeletal muscle changes and enhances muscle oxidative capacity in obese rats

PubMed Central

Acevedo, Luz M.; Raya, Ana I.; Martínez-Moreno, Julio M.

2017-01-01

Obesity-related skeletal muscle changes include muscle atrophy, slow-to-fast fiber-type transformation, and impaired mitochondrial oxidative capacity. These changes relate with increased risk of insulin resistance. Mangiferin, the major component of the plant Mangifera indica, is a well-known anti-inflammatory, anti-diabetic, and antihyperlipidemic agent. This study tested the hypothesis that mangiferin treatment counteracts obesity-induced fiber atrophy and slow-to-fast fiber transition, and favors an oxidative phenotype in skeletal muscle of obese rats. Obese Zucker rats were fed gelatin pellets with (15 mg/kg BW/day) or without (placebo group) mangiferin for 8 weeks. Lean Zucker rats received the same gelatin pellets without mangiferin and served as non-obese and non-diabetic controls. Lesser diameter, fiber composition, and histochemical succinic dehydrogenase activity (an oxidative marker) of myosin-based fiber-types were assessed in soleus and tibialis cranialis muscles. A multivariate discriminant analysis encompassing all fiber-type features indicated that obese rats treated with mangiferin displayed skeletal muscle phenotypes significantly different compared with both lean and obese control rats. Mangiferin significantly decreased inflammatory cytokines, preserved skeletal muscle mass, fiber cross-sectional size, and fiber-type composition, and enhanced muscle fiber oxidative capacity. These data demonstrate that mangiferin attenuated adverse skeletal muscle changes in obese rats. PMID:28253314

Mangiferin protects against adverse skeletal muscle changes and enhances muscle oxidative capacity in obese rats.

PubMed

Acevedo, Luz M; Raya, Ana I; Martínez-Moreno, Julio M; Aguilera-Tejero, Escolástico; Rivero, José-Luis L

2017-01-01

Obesity-related skeletal muscle changes include muscle atrophy, slow-to-fast fiber-type transformation, and impaired mitochondrial oxidative capacity. These changes relate with increased risk of insulin resistance. Mangiferin, the major component of the plant Mangifera indica, is a well-known anti-inflammatory, anti-diabetic, and antihyperlipidemic agent. This study tested the hypothesis that mangiferin treatment counteracts obesity-induced fiber atrophy and slow-to-fast fiber transition, and favors an oxidative phenotype in skeletal muscle of obese rats. Obese Zucker rats were fed gelatin pellets with (15 mg/kg BW/day) or without (placebo group) mangiferin for 8 weeks. Lean Zucker rats received the same gelatin pellets without mangiferin and served as non-obese and non-diabetic controls. Lesser diameter, fiber composition, and histochemical succinic dehydrogenase activity (an oxidative marker) of myosin-based fiber-types were assessed in soleus and tibialis cranialis muscles. A multivariate discriminant analysis encompassing all fiber-type features indicated that obese rats treated with mangiferin displayed skeletal muscle phenotypes significantly different compared with both lean and obese control rats. Mangiferin significantly decreased inflammatory cytokines, preserved skeletal muscle mass, fiber cross-sectional size, and fiber-type composition, and enhanced muscle fiber oxidative capacity. These data demonstrate that mangiferin attenuated adverse skeletal muscle changes in obese rats.

"The largest Lean transformation in the world": the implementation and evaluation of lean in Saskatchewan healthcare.

PubMed

Kinsman, Leigh; Rotter, Thomas; Stevenson, Katherine; Bath, Brenna; Goodridge, Donna; Harrison, Liz; Dobson, Roy; Sari, Nazmi; Jeffery, Cathy; Bourassa, Carrie; Westhorp, Gill

2014-01-01

The Saskatchewan Ministry of Health has committed to a multi-million dollar investment toward the implementation of Lean methodology across the province's healthcare system. Originating as a production line discipline (the Toyota Production System), Lean has evolved to encompass process improvements including inventory management, waste reduction and quality improvement techniques. With an initial focus on leadership, strategic alignment, training and the creation of a supportive infrastructure (Lean promotion offices), the goal in Saskatchewan is a whole health system transformation that produces "better health, better value, better care, and better teams." Given the scope and scale of the initiative and the commitment of resources, it is vital that a comprehensive, longitudinal evaluation plan be implemented to support ongoing decision-making and program design. The nature of the initiative also offers a unique opportunity to contribute to health quality improvement science by advancing our understanding of the implementation and evaluation of complex, large-scale healthcare interventions. The purpose of this article is to summarize the background to Lean in Saskatchewan and the proposed evaluation methods. Copyright © 2014 Longwoods Publishing.

Lean oncology: a new model for oncologists.

PubMed

Montesarchio, Vincenzo; Grimaldi, Antonio Maria; Fox, Bernard A; Rea, Antonio; Marincola, Francesco M; Ascierto, Paolo A

2012-04-25

The history of the term Lean is relatively recent and originates from the Toyota Production System (TPS). The term "Lean" means "thin", which refers to a mental process, operational, productive, no-frills, quick but not hasty, consequential to the previous event. The Lean process flows seamlessly into the result, eliminates unnecessary complications to the effect, prevents unnecessary equipment processes. The idea is to 'do more with less', like using the (few) available resources in the most productive way possible, through the elimination of all types of waste that inevitably accompanies every stage of a production process. Lean management is primarily a management philosophy, a system of values and behaviors that goes beyond the mere application of the instrument and that, once internalized, will form the nucleus of the corporate culture. "Lean Oncology" is a term coined to identify a methodology of care and treatment to cancer patients, consisting on process simplification, streamlining of the organizational and routes of drug treatment, detection and elimination of waste. Its main objective is the centrality of the patient.

Implementation of lean thinking: one health system's journey.

PubMed

Kim, Christopher S; Spahlinger, David A; Kin, Jeanne M; Coffey, Richard J; Billi, John E

2009-08-01

Lean Thinking is a management philosophy derived from the manufacturing industry, where Toyota has long been the gold standard. Health care organizations have started to apply this approach to patient care. After initial experimentation, the University of Michigan Health System (UMHS) has adopted Lean Thinking as its uniform approach to quality improvement and is striving to become a complete Lean organization. In 2005, the senior leadership selected an initial set of projects in areas that traced the patient's journey across different care settings within our health system. Four of the projects were as follows: orthopedic surgery clinic scheduling, radiation oncology therapy, peripherally inserted central catheter (PICC) services, and coordination of care to the outpatient setting. Lean Thinking encourages service providers to focus on value as defined by the customer and the relentless elimination of waste that impedes the flow of value. A series of learning projects were conducted to test whether Lean methods would work at UMHS. The following factors were found to be key to LEAN PROJECT SUCCESS: expert guidance for initial efforts, leadership in the form of clinical champions and senior management support of the improvement work, frontline worker engagement in mapping out "current state" processes, identifying waste and designing an improved "future state," using metrics to develop and track interventions, and defining realistic project scope. As UMHS's experience applying Lean Thinking to our patient care processes has grown, so have support, enthusiasm, and expertise within the organization. UMHS's Lean Thinking system, now known as the Michigan Quality System, has emerged as the core improvement strategy.

Mild and Short-Term Caloric Restriction Prevents Obesity-Induced Cardiomyopathy in Young Zucker Rats without Changing in Metabolites and Fatty Acids Cardiac Profile

PubMed Central

Ruiz-Hurtado, Gema; García-Prieto, Concha F.; Pulido-Olmo, Helena; Velasco-Martín, Juan P.; Villa-Valverde, Palmira; Fernández-Valle, María E.; Boscá, Lisardo; Fernández-Velasco, María; Regadera, Javier; Somoza, Beatriz; Fernández-Alfonso, María S.

2017-01-01

Caloric restriction (CR) ameliorates cardiac dysfunction associated with obesity. However, most of the studies have been performed under severe CR (30–65% caloric intake decrease) for several months or even years in aged animals. Here, we investigated whether mild (20% food intake reduction) and short-term (2-weeks) CR prevented the obese cardiomyopathy phenotype and improved the metabolic profile of young (14 weeks of age) genetically obese Zucker fa/fa rats. Heart weight (HW) and HW/tibia length ratio was significantly lower in fa/fa rats after 2 weeks of CR than in counterparts fed ad libitum. Invasive pressure measurements showed that systolic blood pressure, maximal rate of positive left ventricle (LV) pressure, LV systolic pressure and LV end-diastolic pressure were all significantly higher in obese fa/fa rats than in lean counterparts, which were prevented by CR. Magnetic resonance imaging revealed that the increase in LV end-systolic volume, stroke volume and LV wall thickness observed in fa/fa rats was significantly lower in animals on CR diet. Histological analysis also revealed that CR blocked the significant increase in cardiomyocyte diameter in obese fa/fa rats. High resolution magic angle spinning magnetic resonance spectroscopy analysis of the LV revealed a global decrease in metabolites such as taurine, creatine and phosphocreatine, glutamate, glutamine and glutathione, in obese fa/fa rats, whereas lactate concentration was increased. By contrast, fatty acid concentrations in LV tissue were significantly elevated in obese fa/fa rats. CR failed to restore the LV metabolomic profile of obese fa/fa rats. In conclusion, mild and short-term CR prevented an obesity-induced cardiomyopathy phenotype in young obese fa/fa rats independently of the cardiac metabolic profile. PMID:28203206

Lean healthcare from a change management perspective.

PubMed

van Rossum, Lisa; Aij, Kjeld Harald; Simons, Frederique Elisabeth; van der Eng, Niels; Ten Have, Wouter Dirk

2016-05-16

Purpose - Lean healthcare is used in a growing number of hospitals to increase efficiency and quality of care. However, healthcare organizations encounter problems with the implementation of change initiatives due to an implementation gap: the gap between strategy and execution. From a change management perspective, the purpose of this paper is to increase scientific knowledge regarding factors that diminish the implementation gap and make the transition from the "toolbox lean" toward an actual transformation to lean healthcare. Design/methodology/approach - A cross-sectional study was executed in an operating theatre of a Dutch University Medical Centre. Transformational leadership was expected to ensure the required top-down commitment, whereas team leadership creates the required active, bottom-up behavior of employees. Furthermore, professional and functional silos and a hierarchical structure were expected to impede the workforce flexibility in adapting organizational elements and optimize the entire process flow. Findings - The correlation and regression analyses showed positive relations between the transformational leadership and team leadership styles and lean healthcare implementation. The results also indicated a strong relation between workforce flexibility and the implementation of lean healthcare. Originality/value - With the use of a recently developed change management model, the Change Competence Model, the authors suggest leadership and workforce flexibility to be part of an organization's change capacity as crucial success factor for a sustainable transformation to lean healthcare.

Lean healthcare.

PubMed

Weinstock, Donna

2008-01-01

As healthcare organizations look for new and improved ways to reduce costs and still offer quality healthcare, many are turning to the Toyota Production System of doing business. Rather than focusing on cutting personnel and assets, "lean healthcare" looks to improve patient satisfaction through improved actions and processes.

How does lean work in emergency care? A case study of a lean-inspired intervention at the Astrid Lindgren Children's hospital, Stockholm, Sweden.

PubMed

Mazzocato, Pamela; Holden, Richard J; Brommels, Mats; Aronsson, Håkan; Bäckman, Ulrika; Elg, Mattias; Thor, Johan

2012-02-01

There is growing interest in applying lean thinking in healthcare, yet, there is still limited knowledge of how and why lean interventions succeed (or fail). To address this gap, this in-depth case study examines a lean-inspired intervention in a Swedish pediatric Accident and Emergency department. We used a mixed methods explanatory single case study design. Hospital performance data were analyzed using analysis of variance (ANOVA) and statistical process control techniques to assess changes in performance one year before and two years after the intervention. We collected qualitative data through non-participant observations, semi-structured interviews, and internal documents to describe the process and content of the lean intervention. We then analyzed empirical findings using four theoretical lean principles (Spear and Bowen 1999) to understand how and why the intervention worked in its local context as well as to identify its strengths and weaknesses. Improvements in waiting and lead times (19-24%) were achieved and sustained in the two years following lean-inspired changes to employee roles, staffing and scheduling, communication and coordination, expertise, workspace layout, and problem solving. These changes resulted in improvement because they: (a) standardized work and reduced ambiguity, (b) connected people who were dependent on one another, (c) enhanced seamless, uninterrupted flow through the process, and (d) empowered staff to investigate problems and to develop countermeasures using a "scientific method". Contextual factors that may explain why not even greater improvement was achieved included: a mismatch between job tasks, licensing constraints, and competence; a perception of being monitored, and discomfort with inter-professional collaboration. Drawing on Spear and Bowen's theoretical propositions, this study explains how a package of lean-like changes translated into better care process management. It adds new knowledge regarding how lean

What Do Organizational Leaders Need from Lean Graduate Programming

ERIC Educational Resources Information Center

Flumerfelt, Shannon; Alves, Anabela Carvalho; Leão, Celina Pinto; Wade, Dennis L.

2016-01-01

Purpose: This paper aims to assess the needs for a lean continuous improvement professional certificate and/or lean leadership cognate for a Doctorate of Education in leadership focused in three main research questions: "What do organizational leaders need from a Lean graduate programming?"; "What are the preferable methods of…

Lean Manufacturing Auto Cluster at Chennai

NASA Astrophysics Data System (ADS)

Bhaskaran, E.

2012-10-01

Due the presence of lot of automotive Industry, Chennai is known as Detroit of India, that producing over 40 % of the Indian vehicle and components. Lean manufacturing concepts have been widely recognized as an important tool in improving the competitiveness of industries. This is a continuous process involving everyone, starting from management to the shop floor. Automotive Component Industries (ACIs) in Ambattur Industrial Estate, Chennai has formed special purpose vehicle (SPV) society namely Ambattur Industrial Estate Manufacturers Association (AIEMA) Technology Centre (ATC) lean manufacturing cluster (ATC-LMC) during July 2010 under lean manufacturing competitiveness scheme, that comes under National Manufacturing Competitiveness Programme of Government of India. The Tripartite Agreement is taken place between National Productivity Council, consultants and cluster (ATC-LMC). The objective is to conduct diagnostic study, study on training and application of various lean manufacturing techniques and auditing in ten ACIs. The methodology adopted is collection of primary data/details from ten ACIs. In the first phase, diagnostic study is done and the areas for improvement in each of the cluster member companies are identified. In the second phase, training programs and implementation is done on 5S and other areas. In the third phase auditing is done and found that the lean manufacturing techniques implementation in ATC-LMC is sustainable and successful in every cluster companies, which will not only enhance competitiveness but also decrease cost, time and increase productivity. The technical efficiency of LMC companies also increases significantly.

Escape from rich-to-lean transitions: Stimulus change and timeout.

PubMed

Retzlaff, Billie J; Parthum, Elizabeth T P; Pitts, Raymond C; Hughes, Christine E

2017-01-01

Extended pausing during discriminable transitions from rich-to-lean conditions can be viewed as escape (i.e., rich-to-lean transitions function aversively). In the current experiments, pigeons' key pecking was maintained by a multiple fixed-ratio fixed-ratio schedule of rich or lean reinforcers. Pigeons then were provided with another, explicit, mechanism of escape by changing the stimulus from the transition-specific stimulus used in the multiple schedule to a mixed-schedule stimulus (Experiment 1) or by producing a period of timeout in which the stimulus was turned off and the schedule was suspended (Experiment 2). Overall, escape was under joint control of past and upcoming reinforcer magnitudes, such that responses on the escape key were most likely during rich-to-lean transitions, and second-most likely during lean-to-lean transitions. Even though pigeons pecked the escape key, they paused before doing so, and the latency to begin the fixed ratio (i.e., the pause) remained extended during rich-to-lean transitions. These findings suggest that although the stimulus associated with rich-to-lean transitions functioned aversively, pausing is more than simply escape responding from the stimulus. © 2017 Society for the Experimental Analysis of Behavior.

ED becomes 'lean' and cuts LBTC, LOS times.

PubMed

2008-04-01

Lean manufacturing techniques, first developed by Toyota, can be successfully adapted to help improve processes in your ED. St. Luke's Episcopal Hospital in Houston, has used Lean to reduce median length of stay, frequency of diversions, and the percentage of patients who left before treatment was complete (LBTC). Here's why "Lean" can help improve the performance of your ED: It enables you and your staff to see things from the patient's point of view. Lean tools enable you to view the status of your department in real-time and to compare that status with your performance goals. Exercises help identify areas where your processes break down and determine the most likely solutions.

Buildings Lean Maintenance Implementation Model

NASA Astrophysics Data System (ADS)

Abreu, Antonio; Calado, João; Requeijo, José

2016-11-01

Nowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive".Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.

The challenges of lean manufacturing implementation in kitting assembly

NASA Astrophysics Data System (ADS)

Fansuri, A. F. H.; Rose, A. N. M.; Nik Mohamed, N. M. Z.; Ahmad, H.

2017-10-01

Literature studies shows that lean manufacturing goes way back with the original founder Eli Whitney in year 1799. The main purpose of lean manufacturing is to identify and eliminate waste in production. The application of lean manufacturing can be carried out in any industrial processes with regards to the understanding of lean principles, theories and practices. Kitting is one of the important aspects in a successful production. The continuous supply of materials from store to production has to be systematic and able to achieve lean standard for it to be successful. The objective of this paper is to review the implementation of lean manufacturing in kitting assembly. Previous papers show that, the implementation of lean manufacturing in kitting assembly may be beneficial to the organization such as reduce in space occupancy, part shortages, lead time and manpower. Based on previous research, some industries may tend to change between kitting and line stocking which are due to lack of understanding when implementing kitting and causes longer lead time and materials overflow in store. With a proper understanding on what to kit, where to kit, how to kit, why to kit and who kits the material with a standardised process flow may ensure the success of kitting.

How does lean work in emergency care? A case study of a lean-inspired intervention at the Astrid Lindgren Children's hospital, Stockholm, Sweden

PubMed Central

2012-01-01

Background There is growing interest in applying lean thinking in healthcare, yet, there is still limited knowledge of how and why lean interventions succeed (or fail). To address this gap, this in-depth case study examines a lean-inspired intervention in a Swedish pediatric Accident and Emergency department. Methods We used a mixed methods explanatory single case study design. Hospital performance data were analyzed using analysis of variance (ANOVA) and statistical process control techniques to assess changes in performance one year before and two years after the intervention. We collected qualitative data through non-participant observations, semi-structured interviews, and internal documents to describe the process and content of the lean intervention. We then analyzed empirical findings using four theoretical lean principles (Spear and Bowen 1999) to understand how and why the intervention worked in its local context as well as to identify its strengths and weaknesses. Results Improvements in waiting and lead times (19-24%) were achieved and sustained in the two years following lean-inspired changes to employee roles, staffing and scheduling, communication and coordination, expertise, workspace layout, and problem solving. These changes resulted in improvement because they: (a) standardized work and reduced ambiguity, (b) connected people who were dependent on one another, (c) enhanced seamless, uninterrupted flow through the process, and (d) empowered staff to investigate problems and to develop countermeasures using a "scientific method". Contextual factors that may explain why not even greater improvement was achieved included: a mismatch between job tasks, licensing constraints, and competence; a perception of being monitored, and discomfort with inter-professional collaboration. Conclusions Drawing on Spear and Bowen's theoretical propositions, this study explains how a package of lean-like changes translated into better care process management. It adds

System-wide lean implementation in health care: A multiple case study.

PubMed

Centauri, Federica; Mazzocato, Pamela; Villa, Stefano; Marsilio, Marta

2018-05-01

Background Lean practices have been widely used by health care organizations to meet efficiency, performance and quality improvement needs. The lean health care literature shows that the effective implementation of lean requires a holistic system-wide approach. However, there is still limited evidence on what drives effective system-wide lean implementation in health care. The existing literature suggests that a deeper understanding of how lean interventions interact with the organizational context is necessary to identify the critical variables to successfully sustain system-wide lean strategies. Purpose and methodology: A multiple case study of three Italian hospitals is conducted with the aim to explore the organizational conditions that are relevant for an effective system-wide lean implementation. A conceptual framework, built on socio-technical system schemas, is used to guide data collection and analysis. The analysis points out the importance to support lean implementation with an integrated and coordinated strategy involving the social, technical, and external components of the overall hospital system.

Mechanisms of lower maintenance dose of tacrolimus in obese patients.

PubMed

Sawamoto, Kazuki; Huong, Tran T; Sugimoto, Natsumi; Mizutani, Yuka; Sai, Yoshimichi; Miyamoto, Ken-ichi

2014-01-01

A retrospective analysis suggested that blood tacrolimus concentrations were consistent among patients with a body mass index (BMI) that was lean (<18.5), normal (≥ 18.5 and <25) or overweight/obese (≥ 25). The average maintenance dose of tacrolimus in patients with BMI ≥ 25 was significantly lower compared with that in patients with a BMI of less than 25. Lean and obese Zucker rats fed a normal diet were given tacrolimus intravenously or orally. The blood concentrations of tacrolimus in obese rats were significantly higher than those in lean rats after administration via both routes. The moment analysis has suggested that CLtot and Vdss of tacrolimus were not significantly different between lean and obese rats. The bioavailability was higher in obese rats, compared with that in lean rats. The protein expression of Cyp3a2 in the liver was significantly decreased in obese rats, compared with lean rats, while P-gp in the small intestine was also significantly decreased in obese rats. These results suggested that the steady-state trough concentration of tacrolimus in obese patients was well maintained by a relatively low dose compared with that in normal and lean patients, presumably due to increased bioavailability.

Anti-Obesity Effects of Onion Extract in Zucker Diabetic Fatty Rats

PubMed Central

Yoshinari, Orie; Shiojima, Yoshiaki; Igarashi, Kiharu

2012-01-01

Anti-obesity effects of onion extract were determined in obesity and diabetes-prone Zucker diabetic fatty rats by measuring the efficacy of markers concerned with diabetes and obesity. Body and adipose tissue weights in 5% of onion extract-fed group were found to be significantly lower than the control group without onion extract. Fasting blood glucose and HOMA-IR levels were also improved, although the serum insulin and leptin levels did not show any remarkable difference. Serum triglyceride and free fatty acid levels in both the 3% and 5%-fed group were found to be reduced compared to the control group. Additionally the feeding of the onion extract increased the glucose tolerance. These results suggest that dietary onion extract is beneficial for improving diabetes by decreasing lipid levels. We also examined differentiation ability of rat white preadipocyte cells using the onion extract and its sulfur-containing components. Cycloalliin, S-methyl-L-cysteine, S-propyl-L-cysteine sulfoxide, dimethyl trisulfide, especially S-methyl-L-cysteine sulfoxide were reported to be effective in inhibiting formation of oil drop in the cells, suggesting that these compounds may be involved in the anti-obesity effect of the onion extract. PMID:23201769

Lean thinking in emergency departments: concepts and tools for quality improvement.

PubMed

Bruno, Frances

2017-10-12

The lean approach is a viable framework for reducing costs and enhancing the quality of patient care in emergency departments (EDs). Reports on lean-inspired quality improvement initiatives are rapidly growing but there is little emphasis on the philosophy behind the processes, which is the essential ingredient in sustaining transformation. This article describes lean philosophy, also referred to as lean, lean thinking and lean healthcare, and its main concepts, to enrich the knowledge and vocabulary of nurses involved or interested in quality improvement in EDs. The article includes examples of lean strategies to illustrate their practical application in EDs. ©2012 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

The prevalence of chest compression leaning during in-hospital cardiopulmonary resuscitation

PubMed Central

Fried, David A.; Leary, Marion; Smith, Douglas A.; Sutton, Robert M.; Niles, Dana; Herzberg, Daniel L.; Becker, Lance B.; Abella, Benjamin S.

2011-01-01

Objective Successful resuscitation from cardiac arrest requires the delivery of high-quality chest compressions, encompassing parameters such as adequate rate, depth, and full recoil between compressions. The lack of compression recoil (“leaning” or “incomplete recoil”) has been shown to adversely affect hemodynamics in experimental arrest models, but the prevalence of leaning during actual resuscitation is poorly understood. We hypothesized that leaning varies across resuscitation events, possibly due to rescuer and/or patient characteristics and may worsen over time from rescuer fatigue during continuous chest compressions. Methods This was an observational clinical cohort study at one academic medical center. Data were collected from adult in-hospital and Emergency Department arrest events using monitor/defibrillators that record chest compression characteristics and provide real-time feedback. Results We analyzed 112,569 chest compressions from 108 arrest episodes from 5/2007 to 2/2009. Leaning was present in 98/108 (91%) cases; 12% of all compressions exhibited leaning. Leaning varied widely across cases: 41/108 (38%) of arrest episodes exhibited <5% leaning yet 20/108 (19%) demonstrated >20% compression leaning. When evaluating blocks of continuous compressions (>120 sec), only 4/33 (12%) had an increase in leaning over time and 29/33 (88%) showed a decrease (p<0.001). Conclusions Chest compression leaning was common during resuscitation care and exhibited a wide distribution, with most leaning within a subset of resuscitations. Leaning decreased over time during continuous chest compression blocks, suggesting that either leaning may not be a function of rescuer fatiguing, or that it may have been mitigated by automated feedback provided during resuscitation episodes. PMID:21482010

Improvement of laboratory turnaround time using lean methodology.

PubMed

Gupta, Shradha; Kapil, Sahil; Sharma, Monica

2018-05-14

Purpose The purpose of this paper is to discuss the implementation of lean methodology to reduce the turnaround time (TAT) of a clinical laboratory in a super speciality hospital. Delays in report delivery lead to delayed diagnosis increased waiting time and decreased customer satisfaction. The reduction in TAT will lead to increased patient satisfaction, quality of care, employee satisfaction and ultimately the hospital's revenue. Design/methodology/approach The generic causes resulting in increasing TAT of clinical laboratories were identified using lean tools and techniques such as value stream mapping (VSM), Gemba, Pareto Analysis and Root Cause Analysis. VSM was used as a tool to analyze the current state of the process and further VSM was used to design the future state with suggestions for process improvements. Findings This study identified 12 major non-value added factors for the hematology laboratory and 5 major non-value added factors for the biochemistry lab which were acting as bottlenecks resulting in limiting throughput. A four-month research study by the authors together with hospital quality department and laboratory staff members led to reduction of the average TAT from 180 to 95minutes in the hematology lab and from 268 to 208 minutes in the biochemistry lab. Practical implications Very few improvement initiatives in Indian healthcare are based on industrial engineering tools and techniques, which might be due to a lack of interaction between healthcare and engineering. The study provides a positive outcome in terms of improving the efficiency of services in hospitals and identifies a scope for lean in the Indian healthcare sector. Social implications Applying lean in the Indian healthcare sector gives its own potential solution to the problem caused, due to a wide gap between lean accessibility and lean implementation. Lean helped in changing the mindset of an organization toward providing the highest quality of services with faster delivery at

Disturbing Practices: Training Workers to Be Lean

ERIC Educational Resources Information Center

Yasukawa, Keiko; Brown, Tony; Black, Stephen

2014-01-01

Purpose: The purpose of this paper is to explore the possibilities for expansive learning during organisational change. It considers the introduction of "lean production" as a disturbance to the existing work practices. Design/methodology/approach: The paper considers two case studies of "lean production" training with…

Lean healthcare in developing countries: evidence from Brazilian hospitals.

PubMed

Costa, Luana Bonome Message; Filho, Moacir Godinho; Rentes, Antonio Freitas; Bertani, Thiago Moreno; Mardegan, Ronaldo

2017-01-01

The present study evaluates how five sectors of two Brazilian hospitals have implemented lean healthcare concepts in their operations. The main characteristics of the implementation process are analyzed in the present study: the motivational factor for implementation, implementation time, form (consultancy or internal), team (hospital and consultants), lean implementation continuity/sustainability, lean healthcare tools and methods implemented, problems/improvement opportunities, lean healthcare barriers faced during the implementation process, and critical factors that affected the implementation and the results obtained in each case. The case studies indicate that reducing patient lead times and costs and making financial improvements were the primary factors that motivated lean healthcare implementation in the hospitals studied. Several tools and methods were used in the cases studied, especially value stream mapping and DMAIC. The barriers found in both hospitals are primarily associated with the human factor. Additionally, the results obtained after implementation were analyzed and improvements in financial aspects, productivity and capacity, and lead time reduction of the analyzed sectors were observed. Further, this study also exhibited four propositions elaborated from the results obtained from the cases that highlighted barriers and challenges to lean healthcare implementation in developing countries. Two of these barriers are hospital organizational structure (and, consequently, how the senior management works with medical staff), and outsourcing hospital activities. This study also concluded that the initialization and maintenance of lean healthcare implementation rely heavily on external support because lean healthcare subject knowledge is not yet available in the healthcare organization, which represents a challenge. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Non-alcoholic Fatty Liver Disease in Lean Subjects: Characteristics and Implications.

PubMed

Kumar, Ramesh; Mohan, Shantam

2017-09-28

Non-alcoholic fatty liver disease (NAFLD) is commonly diagnosed in obese subjects; however, it is not rare among lean individuals. Given the absence of traditional risk factors, it tends to remain under-recognised. The metabolic profiles of lean NAFLD patients are frequently comparable to those of obese NAFLD patients. Though results from several studies have been mixed, it has been generally revealed that lean subjects with NAFLD have minor insulin resistance compared to that in obese NAFLD. Several genetic variants are associated with NAFLD without insulin resistance. Some data suggest that the prevalence of steatohepatitis and advanced fibrosis do not differ significantly between lean and obese NAFLD; however, the former tend to have less severe disease at presentation. The underlying pathophysiology of lean NAFLD may be quite different. Genetic predispositions, fructose- and cholesterol-rich diet, visceral adiposity and dyslipidaemia have potential roles in the pathogenic underpinnings. Lean NAFLD may pose a risk for metabolic disturbances, cardiovascular morbidity or overall mortality. Secondary causes of hepatic steatosis are also needed to be ruled out in lean subjects with NAFLD. The effectiveness of various treatment modalities, such as exercise and pharmacotherapy, on lean NAFLD is not known. Weight loss is expected to help lean NAFLD patients who have visceral obesity. Further investigation is needed for many aspects of lean NAFLD, including mechanistic pathogenesis, risk assessment, natural history and therapeutic approach.

Non-alcoholic Fatty Liver Disease in Lean Subjects: Characteristics and Implications

PubMed Central

Kumar, Ramesh; Mohan, Shantam

2017-01-01

Abstract Non-alcoholic fatty liver disease (NAFLD) is commonly diagnosed in obese subjects; however, it is not rare among lean individuals. Given the absence of traditional risk factors, it tends to remain under-recognised. The metabolic profiles of lean NAFLD patients are frequently comparable to those of obese NAFLD patients. Though results from several studies have been mixed, it has been generally revealed that lean subjects with NAFLD have minor insulin resistance compared to that in obese NAFLD. Several genetic variants are associated with NAFLD without insulin resistance. Some data suggest that the prevalence of steatohepatitis and advanced fibrosis do not differ significantly between lean and obese NAFLD; however, the former tend to have less severe disease at presentation. The underlying pathophysiology of lean NAFLD may be quite different. Genetic predispositions, fructose- and cholesterol-rich diet, visceral adiposity and dyslipidaemia have potential roles in the pathogenic underpinnings. Lean NAFLD may pose a risk for metabolic disturbances, cardiovascular morbidity or overall mortality. Secondary causes of hepatic steatosis are also needed to be ruled out in lean subjects with NAFLD. The effectiveness of various treatment modalities, such as exercise and pharmacotherapy, on lean NAFLD is not known. Weight loss is expected to help lean NAFLD patients who have visceral obesity. Further investigation is needed for many aspects of lean NAFLD, including mechanistic pathogenesis, risk assessment, natural history and therapeutic approach. PMID:28936403

Lean management-the journey from toyota to healthcare.

PubMed

Teich, Sorin T; Faddoul, Fady F

2013-04-01

The evolution of production systems is tightly linked to the story of Toyota Motor Company (TMC) that has its roots around 1918. The term "lean" was coined in 1990 following the exploration of the Toyota model that led to the "transference" thesis sustaining the concept that manufacturing problems and technologies are universal problems faced by management and that these concepts can be emulated in non-Japanese enterprises. Lean is a multi-faceted concept and requires organizations to exert effort along several dimensions simultaneously; some consider a successful implementation either achieving major strategic components of lean, implementing practices to support operational aspects, or providing evidence that the improvements are sustainable in the long term. The article explores challenges and opportunities faced by organizations that intend incorporating lean management principles and presents the specific context of the healthcare industry. Finally, the concepts of "essential few" and customer value are illustrated through a simple example of process change following lean principles, which was implemented in a dental school in the United States.

Investigating emergency room service quality using lean manufacturing.

PubMed

Abdelhadi, Abdelhakim

2015-01-01

The purpose of this paper is to investigate a lean manufacturing metric called Takt time as a benchmark evaluation measure to evaluate a public hospital's service quality. Lean manufacturing is an established managerial philosophy with a proven track record in industry. A lean metric called Takt time is applied as a measure to compare the relative efficiency between two emergency departments (EDs) belonging to the same public hospital. Outcomes guide managers to improve patient services and increase hospital performances. The patient treatment lead time within the hospital's two EDs (one department serves male and the other female patients) are the study's focus. A lean metric called Takt time is used to find the service's relative efficiency. Findings show that the lean manufacturing metric called Takt time can be used as an effective way to measure service efficiency by analyzing relative efficiency and identifies bottlenecks in different departments providing the same services. The paper presents a new procedure to compare relative efficiency between two EDs. It can be applied to any healthcare facility.

Lean manufacturing: A better way for enhancement in productivity

NASA Astrophysics Data System (ADS)

Kumar Ahir, Pankaj; Kumar Yadav, Lalit; Singh Chandrawat, Saurabh

2012-03-01

Productivity is the impact of peoples working together. Machines are merely an extended way of collective imagination and energy. Lean Manufacturing is the most used method for continues improvement of business. Organization management philosophy focusing on the reduction of wastage to improve overall customer value. "Lean" operating principles began in manufacturing environments and are known by a variety of synonyms; Lean Manufacturing, Lean Production, Toyota Production System, etc. It is commonly believed that Lean started in Japan "The notable activities in keeping the price of Ford products low is the steady restriction of the production cycle. The longer an article is in the process of manufacture and the more it is moved about, the greater is its ultimate cost." "A systematic approach to identifying and eliminating waste through continuous improvement, flowing the product at the pull of the customer in pursuit of perfection."

Influence of exercise on NA- and Hsp72-induced release of IFNγ by the peritoneal suspension of macrophages and lymphocytes from genetically obese Zucker rats.

PubMed

Martín-Cordero, L; García, J J; Hinchado, M D; Bote, E; Ortega, E

2013-03-01

Regular physical exercise is recognized as a nonpharmacological therapeutic strategy in the treatment of metabolic syndrome, and has been proposed for improving obesity, diabetic status, insulin resistance, and immune response. The aim of the present study was to evaluate the effect of a regular exercise program (treadmill running, 5 days/week for 14 weeks at 35 cm/s for 35 min in the last month) on the release of the pro-inflammatory cytokine interferon gamma (IFNγ) by peritoneal cells (macrophages and lymphocytes) from obese Zucker rats (fa/fa) in response to noradrenaline (NA) and heat shock proteins of 72 kDa (Hsp72), and the possible adaptation due to training for a bout acute exercise (a single session of 25-35 min at 35 cm/s). In healthy (lean Fa/fa) and obese animals, peritoneal cells released greater concentrations of IFNγ in response to Hsp72 and lower concentrations in response to NA. The regular exercise training protocol, evaluated in the obese animals, produced a clear change in the regulation of the release of IFNγ. Peritoneal immune cells from trained animals released more IFNγ in response to NA, but there was a reduction in the release of IFNγ in response to Hsp72. In the obese animals, regular exercise caused a change in the inhibitory effect of NA (which now becomes stimulatory) and the stimulatory effect of Hsp72e (which now becomes inhibitory) in relation to the release of IFNγ. This reflects that Hsp72, induced by the prior release of NA following exercise-induced stress, plays a role in the homeostatic balance of release of IFNγ by peritoneal immune cells in obese animals during exercise.

Effects of organizational context on Lean implementation in five hospital systems.

PubMed

Harrison, Michael I; Paez, Kathryn; Carman, Kristin L; Stephens, Jennifer; Smeeding, Lauren; Devers, Kelly J; Garfinkel, Steven

2016-01-01

Despite broad agreement among researchers about the value of examining how context shapes implementation of improvement programs and projects, limited attention has been paid to contextual effects on implementation of Lean. To help reduce gaps in knowledge of effects of intraorganizational context, we researched Lean implementation initiatives in five organizations and examined 12 of their Lean rapid improvement projects. All projects aimed at improving clinical care delivery. On the basis of the literature on Lean, innovation, and quality improvement, we developed a framework of factors likely to affect Lean implementation and outcomes. Drawing on the framework, we conducted semistructured interviews and applied qualitative codes to the transcribed interviews. Available documents, data, and observations supplemented the interviews. We constructed case studies of Lean implementation in each organization, compared implementation across organizations, and compared the 12 projects. Intraorganizational characteristics affecting organization-wide Lean initiatives and often also shaping project outcomes included CEO commitment to Lean and active support for it, prior organizational capacity for quality improvement-based performance improvement, alignment of the Lean initiative with the organizational mission, dedication of resources and experts to Lean, staff training before and during projects, establishment of measurable and relevant project targets, planning of project sequences that enhance staff capabilities and commitment without overburdening them, and ensuring communication between project members and other affected staff. Dependence of projects on inputs of new information technology was a barrier to project success. Incremental implementation of Lean produced reported improvements in operational efficiency and occasionally in care quality. However, even under the relatively favorable circumstances prevailing in our study sites, incremental implementation did

Debates Regarding Lean Patients with Polycystic Ovary Syndrome: A Narrative Review.

PubMed

Goyal, Manu; Dawood, Ayman S

2017-01-01

Polycystic ovary syndrome (PCOS) is a complex syndrome showing the clinical features of an endocrine/metabolic disorder, including hyperinsulinemia and hyperandrogenism. Two phenotypes are present, either lean or obese, with different biochemical, hormonal, and metabolic profiles. Evidence suggests many treatment modalities that can be applied. However, many of these modalities were found to be not suitable for the lean phenotype of PCOS. Much contradictory research was found regarding lean patients with PCOS. The aim of this narrative review is to shed light on the debate prevailing regarding characteristics, as well as metabolic, hematological, and potential management modalities. Literature review was performed from January 1, 2000 to March 31, 2017 with specific word search such as lean PCOS, hormonal abnormalities in lean PCOS, and the management of lean PCOS. All retrieved articles were carefully assessed, and data were obtained. We could conclude that the debate is still prevailing regarding this specific lean population with PCOS, especially with regard to their characteristics and management modalities. Further studies are still required to resolve this debate on the presence of PCOS in lean women.

Debates Regarding Lean Patients with Polycystic Ovary Syndrome: A Narrative Review

PubMed Central

Goyal, Manu; Dawood, Ayman S.

2017-01-01

Polycystic ovary syndrome (PCOS) is a complex syndrome showing the clinical features of an endocrine/metabolic disorder, including hyperinsulinemia and hyperandrogenism. Two phenotypes are present, either lean or obese, with different biochemical, hormonal, and metabolic profiles. Evidence suggests many treatment modalities that can be applied. However, many of these modalities were found to be not suitable for the lean phenotype of PCOS. Much contradictory research was found regarding lean patients with PCOS. The aim of this narrative review is to shed light on the debate prevailing regarding characteristics, as well as metabolic, hematological, and potential management modalities. Literature review was performed from January 1, 2000 to March 31, 2017 with specific word search such as lean PCOS, hormonal abnormalities in lean PCOS, and the management of lean PCOS. All retrieved articles were carefully assessed, and data were obtained. We could conclude that the debate is still prevailing regarding this specific lean population with PCOS, especially with regard to their characteristics and management modalities. Further studies are still required to resolve this debate on the presence of PCOS in lean women. PMID:29142442

Leading Lean: a Canadian healthcare leader's guide.

PubMed

Fine, Benjamin A; Golden, Brian; Hannam, Rosemary; Morra, Dante

2009-01-01

Canadian healthcare organizations are increasingly asked to do more with less, and too often this has resulted in demands on staff to simply work harder and longer. Lean methodologies, originating from Japanese industrial organizations and most notably Toyota, offer an alternative - tried and tested approaches to working smarter. Lean, with its systematic approaches to reducing waste, has found its way to Canadian healthcare organizations with promising results. This article reports on a study of five Canadian healthcare providers that have recently implemented Lean. We offer stories of success but also identify potential obstacles and ways by which they may be surmounted to provide better value for our healthcare investments.

Lean Stability augmentation study

NASA Technical Reports Server (NTRS)

Mcvey, J. B.; Kennedy, J. B.

1979-01-01

An analytical and experimental program was conducted to investigate techniques and develop technology for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. Three concepts for improving lean stability limits were selected for experimental evaluation among twelve approaches considered. Concepts were selected on the basis of the potential for improving stability limits and achieving emission goals, the technological risks associated with development of practical burners employing the concepts, and the penalties to airline direct operating costs resulting from decreased combustor performance, increased engine cost, increased maintenance cost and increased engine weight associated with implementation of the concepts. Tests of flameholders embodying the selected concepts were conducted.

'Lean' approach gives greater efficiency.

PubMed

Call, Roger

2014-02-01

Adapting the 'Lean' methodologies used for many years by many manufacturers on the production line - such as in the automotive industry - and deploying them in healthcare 'spaces' can, Roger Call, an architect at Herman Miller Healthcare in the US, argues, 'easily remedy many of the inefficiencies' found within a healthcare facility. In an article that first appeared in the September 2013 issue of The Australian Hospital Engineer, he explains how 'Lean' approaches such as the 'Toyota production system', and 'Six Sigma', can be harnessed to good effect in the healthcare sphere.

Does lean muddy the quality improvement waters? A qualitative study of how a hospital management team understands lean in the context of quality improvement.

PubMed

Savage, Carl; Parke, Louise; von Knorring, Mia; Mazzocato, Pamela

2016-10-19

Health care has experimented with many different quality improvement (QI) approaches with greater variation in name than content. This has been dubbed pseudoinnovation. However, it could also be that the subtleties and differences are not clearly understood. To explore this further, the purpose of this study was to explore how hospital managers perceive lean in the context of QI. We used a qualitative study design with semi-structured interviews to explore twelve top managers' perceptions of the relationship between lean and quality improvement (QI) at a university-affiliated hospital. Managers described that QI and lean shared the same overall purpose: focus on patient needs and improve efficiency and effectiveness. Employee involvement was emphasized in both strategies, as well as the support offered by managers of staff initiatives. QI was perceived as a strategy that could support structural changes at the organizational level whereas lean was seen as applicable at the operational level. Moreover, lean carried a negative connotation, lacked the credibility of QI, and was perceived as a management fad. Aspects of QI and lean were misunderstood. In a context where lean remains an abstract term, and staff associate lean with automotive applications and cost reduction, it may be fruitful for managers to invest time and resources to develop a strategy for continual improvement and utilize vocabulary that resonates with health care staff. This could reduce the risk that improvement efforts are rejected out of hand.

Relationship Between Lean Production and Operational Performance in the Manufacturing Industry

NASA Astrophysics Data System (ADS)

Rasi, Raja Zuraidah R. M.; Syamsyul Rakiman, Umol; Ahmad, Md Fauzi Bin

2015-05-01

Nowadays, more and more manufacturing firms have started to implement lean production system in their operations. Lean production viewed as one of the mechanism to maintain the organisation's position and to compete globally. However, many fail to apply the lean concepts successfully in their operations. Based on previous studies, implementation of lean production in the manufacturing industry is more focused on the relationship between Lean and Operational Performance of one dimension only. Therefore, this study attempted to examine the relationship between Lean Production (LP) and Operational Performance in 4 dimensions which are quality, delivery, cost and flexibility. This study employed quantitative study using questionnaires. Data was collected from 50 manufacturing industries. The data was analysed using Statistical Package for Social Science (SPSS) 22.0. This study is hoped to shed new understanding on the concept of Lean Production (LP) in regards of Operational Performance covering the 4 dimensions.

Tissue-specific selection of stable reference genes for real-time PCR normalization in an obese rat model.

PubMed

Cabiati, Manuela; Raucci, Serena; Caselli, Chiara; Guzzardi, Maria Angela; D'Amico, Andrea; Prescimone, Tommaso; Giannessi, Daniela; Del Ry, Silvia

2012-06-01

Obesity is a complex pathology with interacting and confounding causes due to the environment, hormonal signaling patterns, and genetic predisposition. At present, the Zucker rat is an eligible genetic model for research on obesity and metabolic syndrome, allowing scrutiny of gene expression profiles. Real-time PCR is the benchmark method for measuring mRNA expressions, but the accuracy and reproducibility of its data greatly depend on appropriate normalization strategies. In the Zucker rat model, no specific reference genes have been identified in myocardium, kidney, and lung, the main organs involved in this syndrome. The aim of this study was to select among ten candidates (Actb, Gapdh, Polr2a, Ywhag, Rpl13a, Sdha, Ppia, Tbp, Hprt1 and Tfrc) a set of reference genes that can be used for the normalization of mRNA expression data obtained by real-time PCR in obese and lean Zucker rats both at fasting and during acute hyperglycemia. The most stable genes in the heart were Sdha, Tbp, and Hprt1; in kidney, Tbp, Actb, and Gapdh were chosen, while Actb, Ywhag, and Sdha were selected as the most stably expressed set for pulmonary tissue. The normalization strategy was used to analyze mRNA expression of tumor necrosis factor α, the main inflammatory mediator in obesity, whose variations were more significant when normalized with the appropriately selected reference genes. The findings obtained in this study underline the importance of having three stably expressed reference gene sets for use in the cardiac, renal, and pulmonary tissues of an experimental model of obese and hyperglycemic Zucker rats.

Application of a mathematical model for ergonomics in lean manufacturing.

PubMed

Botti, Lucia; Mora, Cristina; Regattieri, Alberto

2017-10-01

The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

Succesful Lean Manufacturing Implementation: Internal Key Influencing Factors

NASA Astrophysics Data System (ADS)

Virginia, Iuga; Claudiu, Kifor

2015-09-01

Manufacturing sectors and companies all over the world are successfully implementing lean principles within their processes. Nowadays, lean has become an indispensable part of global players. Companies worldwide need to be aware of multiple factors which weigh heavily on the success or failure of lean implementation. This paper focuses on giving a brief and structured overview over the fundamental organizational factors which play a substantial role for the lean manufacturing (LM) implementation process. The study below focuses on internal factors which are indispensable for a successful LM implementation within organizations. It is imperative that these internal factors are known, recognized and taken into consideration during the whole LM implementation process. Ignoring their influence on the process's implementation may lead to endangering the expected results or to making the process more difficult which could result in much higher human resource consumption.

Ares Launch Vehicles Lean Practices Case Study

NASA Technical Reports Server (NTRS)

Doreswamy, Rajiv; Self, Timothy A.

2007-01-01

The Ares launch vehicles team, managed by the Ares Projects Office (APO) at NASA Marshall Space Flight Center, has completed the Ares I Crew Launch Vehicle System Requirements Review and System Definition Review and early design work for the Ares V Cargo Launch Vehicle. This paper provides examples of how Lean Manufacturing, Kaizen events, and Six Sigma practices are helping APO deliver a new space transportation capability on time and within budget, while still meeting stringent technical requirements. For example, Lean philosophies have been applied to numerous process definition efforts and existing process improvement activities, including the Ares I-X test flight Certificate of Flight Readiness (CoFR) process, risk management process, and review board organization and processes. Ares executives learned Lean practices firsthand, making the team "smart buyers" during proposal reviews and instilling the team with a sense of what is meant by "value-added" activities. Since the goal of the APO is to field launch vehicles at a reasonable cost and on an ambitious schedule, adopting Lean philosophies and practices will be crucial to the Ares Project's long-term SUCCESS.

The current state of Lean implementation in health care: literature review.

PubMed

Poksinska, Bozena

2010-01-01

The purpose of this article is to discuss the current state of implementation of Lean production in health care. The study focuses on the definition of Lean in health care and implementation process, barriers, challenges, enablers, and outcomes of implementing Lean production methods in health care. A comprehensive search of the literature concerning the implementation of Lean production in health care was used to generate a synthesis of the literature around the chosen research questions. Lean production in health care is mostly used as a process improvement approach and focuses on 3 main areas: (1) defining value from the patient point of view, (2) mapping value streams, and (3) eliminating waste in an attempt to create continuous flow. Value stream mapping is the most frequently applied Lean tool in health care. The usual implementation steps include conducting Lean training, initiating pilot projects, and implementing improvements using interdisciplinary teams. One of the barriers is lack of educators and consultants who have their roots in the health care sector and can provide support by sharing experience and giving examples from real-life applications of Lean in health care. The enablers of Lean in health care seem not to be different from the enablers of any other change initiative. The outcomes can be divided into 2 broad areas: the performance of the health care system and the development of employees and work environment.

Joint feedback analysis modeling of nonesterified fatty acids in obese Zucker rats and normal Sprague-Dawley rats after different routes of administration of nicotinic acid.

PubMed

Tapani, Sofia; Almquist, Joachim; Leander, Jacob; Ahlström, Christine; Peletier, Lambertus A; Jirstrand, Mats; Gabrielsson, Johan

2014-08-01

Data were pooled from several studies on nicotinic acid (NiAc) intervention of fatty acid turnover in normal Sprague-Dawley and obese Zucker rats in order to perform a joint PKPD of data from more than 100 normal Sprague-Dawley and obese Zucker rats, exposed to several administration routes and rates. To describe the difference in pharmacodynamic parameters between obese and normal rats, we modified a previously published nonlinear mixed effects model describing tolerance and oscillatory rebound effects of NiAc on nonesterified fatty acids plasma concentrations. An important conclusion is that planning of experiments and dose scheduling cannot rely on pilot studies on normal animals alone. The obese rats have a less-pronounced concentration-response relationship and need higher doses to exhibit desired response. The relative level of fatty acid rebound after cessation of NiAc administration was also quantified in the two rat populations. Building joint normal-disease models with scaling parameter(s) to characterize the "degree of disease" can be a useful tool when designing informative experiments on diseased animals, particularly in the preclinical screen. Data were analyzed using nonlinear mixed effects modeling, for the optimization, we used an improved method for calculating the gradient than the usually adopted finite difference approximation. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Use of Blade Lean in Turbomachinery Redesign

NASA Technical Reports Server (NTRS)

Moore, John; Moore, Joan G.; Lupi, Alex

1993-01-01

Blade lean is used to improve the uniformity of exit flow distributions from turbomachinery blading. In turbines, it has been used to control secondary flows by tailoring blade turning to reduce flow overturning and underturning and to create more uniform loss distributions from hub to shroud. In the present study, the Pump Consortium centrifugal impeller has been redesigned using blade lean. The flow at the exit of the baseline impeller had large blade-to-blade variations, creating a highly unsteady flow for the downstream diffuser. Blade lean is used to redesign the flow to move the high loss fluid from the suction side to the hub, significantly reducing blade-toblade variations at the exit.

Implementing Lean Manufacturing in Malaysian Small and Medium Startup Pharmaceutical Company

NASA Astrophysics Data System (ADS)

Ibrahim, Wan Mohd Khairi bin Wan; Rahman, Mohamed Abdul; Abu Bakar, Mohd Rushdi bin

2017-03-01

Domestic pharmaceutical industry has been identified by the Malaysian government as an industry to be developed under its 11th economic development plan. Most homegrown pharmaceutical companies fall under the category of small and medium enterprises (SME) and therefore need to be highly efficient in their operations to compete with the multinationals. Though lean manufacturing is a well-known methodology to achieve an efficient operation, only a small percentage of the local SMEs implement it. The study aims to determine the real success factors in lean implementation through systematic review of relevant literature on lean manufacturing implementation in local companies, onsite observation of a selected SME company, Global Factor Sdn. Bhd. (GFSB), that successfully implemented lean manufacturing followed by actual implementation of lean project at IKOP Sdn. Bhd., a small startup pharmaceutical company. Lean tools like Gemba, value stream map (VSM) and spaghetti diagram were used to analyze and improve a process at IKOP Sdn. Bhd. The literature review showed that the implementation of lean manufacturing at Malaysian SMEs involved in pharmaceutical industry is at its infancy. Study at GFSB indicated that successful implementation of lean manufacturing stems from management support, employee’s commitment, government support and knowledge on lean among employees. Application of lean tools in IKOP Sdn. Bhd. to improve the process cycle efficiency of hand sanitizer, i-Hand 4.0, has shown that the GMP guidelines are not jeopardized. The Kaizen improvement project resulted in 46.3% reduction in lead time. It may be concluded that implementing lean manufacturing in any small local startup pharmaceutical company is beneficial in reducing operational costs and increasing the efficiency and effectiveness and does not conflict with the existing GMP guidelines.

Lean Government Methods Guide

EPA Pesticide Factsheets

This Guide focuses primarily on Lean production, which is an organizational improvement philosophy and set of methods that originated in manufacturing but has been expanded to government and service sectors.

Genetic profiling of two phenotypically distinct outbred rats derived from a colony of the Zucker fatty rats maintained at Tokyo Medical University

PubMed Central

Nakanishi, Satoshi; Kuramoto, Takashi; Kashiwazaki, Naomi; Yokoi, Norihide

2016-01-01

The Zucker fatty (ZF) rat is an outbred rat and a well-known model of obesity without diabetes, harboring a missense mutation (fatty, abbreviated as fa) in the leptin receptor gene (Lepr). Slc:Zucker (Slc:ZF) outbred rats exhibit obesity while Hos:ZFDM-Leprfa (Hos:ZFDM) outbred rats exhibit obesity and type 2 diabetes. Both outbred rats have been derived from an outbred ZF rat colony maintained at Tokyo Medical University. So far, genetic profiles of these outbred rats remain unknown. Here, we applied a simple genotyping method using Ampdirect reagents and FTA cards (Amp-FTA) in combination with simple sequence length polymorphisms (SSLP) markers to determine genetic profiles of Slc:ZF and Hos:ZFDM rats. Among 27 SSLP marker loci, 24 loci (89%) were fixed for specific allele at each locus in Slc:ZF rats and 26 loci (96%) were fixed in Hos:ZFDM rats, respectively. This indicates the low genetic heterogeneity in both colonies of outbred rats. Nine loci (33%) showed different alleles between the two outbred rats, suggesting considerably different genetic profiles between the two outbred rats in spite of the same origin. Additional analysis using 72 SSLP markers further supported these results and clarified the profiles in detail. This study revealed that genetic profiles of the Slc:ZF and Hos:ZFDM outbred rats are different for about 30% of the SSLP marker loci, which is the underlying basis for the phenotypic difference between the two outbred rats. PMID:27795491

Stability of leaning column at Devils Tower National Monument, Wyoming

USGS Publications Warehouse

Harp, Edwin L.; Lindsay, Charles R.

2006-01-01

In response to reports from climbers that an 8-meter section (referred to as the leaning column) of the most popular climbing route on Devils Tower in northeastern Wyoming is now moving when being climbed, scientists from the U.S. Geological Survey inspected the site to determine the stability of the column and the underlying column that serves as a support pedestal. Evidence of a recent tensile spalling failure was observed on the pedestal surface immediately beneath the contact with the overlying leaning column. The spalling of a flake-shaped piece of the pedestal, probably due to the high stress concentration exerted by the weight of the leaning column along a linear contact with the pedestal, is likely causing the present movement of the leaning column. Although it is unlikely that climbers will dislodge the leaning column by their weight alone, the possibility exists that additional spalling failures may occur from the pedestal surface and further reduce the stability of the leaning column and result in its toppling. To facilitate detection of further spalling failures from the pedestal, its surface has been coated with a layer of paint. Any new failures from the pedestal could result in the leaning column toppling onto the climbing route or onto the section of the Tower trail below.

A Simulation of Lean Manufacturing: The Lean Lemonade Tycoon 2

ERIC Educational Resources Information Center

Ncube, Lisa B.

2010-01-01

This article discusses the functions and effectiveness of games and simulations in the learning processes, in particular as an experiential learning methodology. The application of the game Lemonade Tycoon in the development of lean manufacturing concepts is described. This article addresses the use of the game to teach the principles of lean…

Acceptance of lean redesigns in primary care: A contextual analysis.

PubMed

Hung, Dorothy; Gray, Caroline; Martinez, Meghan; Schmittdiel, Julie; Harrison, Michael I

Lean is a leading change strategy used in health care to achieve short-term efficiency and quality improvement while promising longer-term system transformation. Most research examines Lean intervention to address isolated problems, rather than to achieve broader systemic changes to care delivery. Moreover, no studies examine contextual influences on system-wide Lean implementation efforts in primary care. The aim of this study was to identify contextual factors most critical to implementing and scaling Lean redesigns across all primary care clinics in a large, ambulatory care delivery system. Over 100 interviews and focus groups were conducted with frontline physicians, clinical staff, and operational leaders. Data analysis was guided by a modified Consolidated Framework for Implementation Research (CFIR), a popular implementation science framework. On the basis of expert recommendations, the modified framework targets factors influencing the implementation of process redesigns. This modified framework, the CFIR-PR, informed our identification of contextual factors that most impacted Lean acceptance among frontline physicians and staff. Several domains identified by the CFIR-PR were critical to acceptance of Lean redesigns. Regarding the implementation process acceptance was influenced by time and intensity of exposure to changes, "top-down" versus "bottom-up" implementation styles, and degrees of employee engagement in developing new workflows. Important factors in the inner setting were the clinic's culture and style of leadership, along with availability of information about Lean's effectiveness. Last, implementation efforts were impacted by individual and team characteristics regarding changed work roles and related issues of professional identity, authority, and autonomy. This study underscores the need for change leaders to consider the contextual factors that surround efforts to implement Lean in primary care. As Lean redesigns are scaled across a system

Improvement of emergency department patient flow using lean thinking.

PubMed

Sánchez, Miquel; Suárez, Montse; Asenjo, María; Bragulat, Ernest

2018-05-01

To apply lean thinking in triage acuity level-3 patients in order to improve emergency department (ED) throughtput and waiting time. A prospective interventional study. An ED of a tertiary care hospital. Triage acuity level-3 patients. To apply lean techniques such as value stream mapping, workplace organization, reduction of wastes and standardization by the frontline staff. Two periods were compared: (i) pre-lean: April-September, 2015; and (ii) post-lean: April-September, 2016. Variables included: median process time (time from beginning of nurse preparation to the end of nurse finalization after doctor disposition) of both discharged and transferred to observation patients; median length of stay; median waiting time; left without being seen, 72-h revisit and mortality rates, and daily number of visits. There was no additional staff or bed after lean implementation. Despite an increment in the daily number of visits (+8.3%, P < 0.001), significant reductions in process time of discharged (182 vs 160 min, P < 0.001) and transferred to observation (186 vs 176 min, P < 0.001) patients, in length of stay (389 vs 329 min, P < 0.001), and in waiting time (71 vs 48 min, P < 0.001) were achieved after lean implementation. No significant differences were registered in left without being seen rate (5.23% vs 4.95%), 72-h revisit rate (3.41% vs 3.93%), and mortality rate (0.23% vs 0.15%). Lean thinking is a methodology that can improve triage acuity level-3 patient flow in the ED, resulting in better throughput along with reduced waiting time.

Readiness factors for lean implementation in healthcare settings--a literature review.

PubMed

Al-Balushi, S; Sohal, A S; Singh, P J; Al Hajri, A; Al Farsi, Y M; Al Abri, R

2014-01-01

The purpose of this paper is to determine the readiness factors that are critical to the application and success of lean operating principles in healthcare organizations through a review of relevant literature. A comprehensive review of literature focussing on lean and lean healthcare was conducted. Leadership, organizational culture, communication, training, measurement, and reward systems are all commonly attributed readiness factors throughout general change management and lean literature. However, directly related to the successful implementation of lean in healthcare is that a setting is able to authorize a decentralized management style and undertake an end-to-end process view. These can be particularly difficult initiatives for complex organizations such as healthcare settings. The readiness factors identified are based on a review of the published literature. The external validity of the findings could be enhanced if tested using an empirical study. The readiness factors identified will enable healthcare practitioners to be better prepared as they begin their lean journeys. Sustainability of the lean initiative will be at stake if these readiness factors are not addressed. To the best of the knowledge, this is the first paper that provides a consolidated list of key lean readiness factors that can guide practice, as well as future theory and empirical research.

Lean and the Learning Organization in Higher Education

ERIC Educational Resources Information Center

Francis, David E.

2014-01-01

Canadian post-secondary institutions are seeking enhanced efficiencies due to ongoing funding shortfalls and expanding teaching, research, and service mandates. These institutions have considered or enacted Lean methodology based on results reported by public service and healthcare organizations worldwide. Lean requires a high level of…

Theories of lean management: an empirical evaluation.

PubMed

Handel, Michael J

2014-03-01

Debates within organization theory traditionally argued the relative merits of bureaucracy but today there is broad agreement across different perspectives that bureaucratic organization is inefficient and outmoded. Despite their differences, post-bureaucratic and neo-liberal theories argue that organizations with relatively flat hierarchies and low management overhead are better adapted to current market requirements. Post-bureaucratic theory also argues that employees, as well as firms, benefit from leaner management structures. This paper investigates trends in managerial leanness, proposed explanations for such trends, and the consequences of leanness for firms and employees. Although there is a trend toward flatter management hierarchies, there is only weak support for current claims regarding both the causes and consequences of lean management. Copyright © 2013 Elsevier Inc. All rights reserved.

Supplemental fructose attenuates postprandial glycemia in Zucker fatty fa/fa rats.

PubMed

Wolf, Bryan W; Humphrey, Phillip M; Hadley, Craig W; Maharry, Kati S; Garleb, Keith A; Firkins, Jeffrey L

2002-06-01

Experiments were conducted to evaluate the effects of supplemental fructose on postprandial glycemia. After overnight food deprivation, Zucker fatty fa/fa rats were given a meal glucose tolerance test. Plasma glucose response was determined for 180 min postprandially. At a dose of 0.16 g/kg body, fructose reduced (P < 0.05) the incremental area under the curve (AUC) by 34% when supplemented to a glucose challenge and by 32% when supplemented to a maltodextrin (a rapidly digested starch) challenge. Similarly, sucrose reduced (P = 0.0575) the incremental AUC for plasma glucose when rats were challenged with maltodextrin. Second-meal glycemic response was not affected by fructose supplementation to the first meal, and fructose supplementation to the second meal reduced (P < 0.05) postprandial glycemia when fructose had been supplemented to the first meal. In a dose-response study (0.1, 0.2, and 0.5 g/kg body), supplemental fructose reduced (P < 0.01) the peak rise in plasma glucose (linear and quadratic effects). In the final experiment, a low dose of fructose (0.075 g/kg body) reduced (P < 0.05) the incremental AUC by 18%. These data support the hypothesis that small amounts of oral fructose or sucrose may be useful in lowering the postprandial blood glucose response.

Development of an interprofessional lean facilitator assessment scale.

PubMed

Bravo-Sanchez, Cindy; Dorazio, Vincent; Denmark, Robert; Heuer, Albert J; Parrott, J Scott

2018-05-01

High reliability is important for optimising quality and safety in healthcare organisations. Reliability efforts include interprofessional collaborative practice (IPCP) and Lean quality/process improvement strategies, which require skilful facilitation. Currently, no validated Lean facilitator assessment tool for interprofessional collaboration exists. This article describes the development and pilot evaluation of such a tool; the Interprofessional Lean Facilitator Assessment Scale (ILFAS), which measures both technical and 'soft' skills, which have not been measured in other instruments. The ILFAS was developed using methodologies and principles from Lean/Shingo, IPCP, metacognition research and Bloom's Taxonomy of Learning Domains. A panel of experts confirmed the initial face validity of the instrument. Researchers independently assessed five facilitators, during six Lean sessions. Analysis included quantitative evaluation of rater agreement. Overall inter-rater agreement of the assessment of facilitator performance was high (92%), and discrepancies in the agreement statistics were analysed. Face and content validity were further established, and usability was evaluated, through primary stakeholder post-pilot feedback, uncovering minor concerns, leading to tool revision. The ILFAS appears comprehensive in the assessment of facilitator knowledge, skills, abilities, and may be useful in the discrimination between facilitators of different skill levels. Further study is needed to explore instrument performance and validity.

Hormonal and metabolic responses to a resistance exercise protocol in lean children, obese children and lean adults.

PubMed

Rubin, Daniela A; Castner, Diobel M; Pham, Hoang; Ng, Jason; Adams, Eric; Judelson, Daniel A

2014-11-01

During childhood, varying exercise modalities are recommended to stimulate normal growth, development, and health. This project investigated hormonal and metabolic responses triggered by a resistance exercise protocol in lean children (age: 9.3 ± 1.4 y, body fat: 18.3 ± 4.9%), obese children (age: 9.6 ± 1.3 y, body fat: 40.3 ± 5.2%) and lean adults (age: 23.3 ± 2.4 y, body fat: 12.7 ± 2.9%). The protocol consisted of stepping onto a raised platform (height = 20% of stature) while wearing a weighted vest (resistance = 50% of lean body mass). Participants completed 6 sets of 10 repetitions per leg with a 1-min rest period between sets. Blood samples were obtained at rest preexercise, immediately postexercise and 2 times throughout the 1-hr recovery to analyze possible changes in hormones and metabolites. Children-adult differences included a larger exercise-induced norepinephrine increase in adults vs. children and a decrease in glucagon in children but not adults. Similarities between adults and children were observed for GH-IGF-1 axis responses. Metabolically, children presented with lower glycolytic and increased fat metabolism after exercise than adults did. Obesity in childhood negatively influenced GH, insulin, and glucose concentrations. While adults occasionally differed from children, amount of activated lean mass, not maturation, likely drove these dissimilarities.

Alcohol produces distinct hepatic lipidome and eicosanoid signature in lean and obese.

PubMed

Puri, Puneet; Xu, Jun; Vihervaara, Terhi; Katainen, Riikka; Ekroos, Kim; Daita, Kalyani; Min, Hae-Ki; Joyce, Andrew; Mirshahi, Faridoddin; Tsukamoto, Hidekazu; Sanyal, Arun J

2016-06-01

Alcohol- and obesity-related liver diseases often coexist. The hepatic lipidomics due to alcohol and obesity interaction is unknown. We characterized the hepatic lipidome due to 1) alcohol consumption in lean and obese mice and 2) obesity and alcohol interactions. In the French-Tsukamoto mouse model, intragastric alcohol or isocaloric dextrose were fed with either chow (lean) or high-fat, high-cholesterol diet (obese). Four groups (lean, lean alcohol, obese, and obese alcohol) were studied. MS was performed for hepatic lipidomics, and data were analyzed. Alcohol significantly increased hepatic cholesteryl esters and diacyl-glycerol in lean and obese but was more pronounced in obese. Alcohol produced contrasting changes in hepatic phospholipids with significant enrichment in lean mice versus significant decrease in obese mice, except phosphatidylglycerol, which was increased in both lean and obese alcohol groups. Most lysophospholipids were increased in lean alcohol and obese mice without alcohol use only. Prostaglandin E2; 5-, 8-, and 11-hydroxyeicosatetraenoic acids; and 9- and 13-hydroxyoctadecadienoic acids were considerably increased in obese mice with alcohol use. Alcohol consumption produced distinct changes in lean and obese with profound effects of obesity and alcohol interaction on proinflammatory and oxidative stress-related eicosanoids. Copyright © 2016 by the American Society for Biochemistry and Molecular Biology, Inc.

Improving first case start times using Lean in an academic medical center.

PubMed

Deldar, Romina; Soleimani, Tahereh; Harmon, Carol; Stevens, Larry H; Sood, Rajiv; Tholpady, Sunil S; Chu, Michael W

2017-06-01

Lean is a process improvement strategy that can improve efficiency of the perioperative process. The purpose of this study was to identify etiologies of late surgery start times, implement Lean interventions, and analyze their effects. A retrospective review of all first-start surgery cases was performed. Lean was implemented in May 2015, and cases 7 months before and after implementation were analyzed. A total of 4,492 first-start cases were included; 2,181 were pre-Lean and 2,311 were post-Lean. The post-Lean group had significantly higher on-time starts than the pre-Lean group (69.0% vs 57.0%, P < .01). The most common delay etiology was surgeon-related for both groups. Delayed post-Lean cases were significantly less likely to be due to preoperative assessment (14.9% vs 9.9%, P < .01) and more likely due to patient-related (16.5% vs 22.3%, P < .01) or chaplain (1.8% vs 4.0%, P < .01) factors. Delayed starts occurred more often on snowy and cold days, and less often on didactic days (P < .01). Modifying preoperative tasks using Lean methods can improve operating room efficiency and increase on-time starts. Copyright © 2016 Elsevier Inc. All rights reserved.

Antecedents and characteristics of lean thinking implementation in a Swedish hospital: a case study.

PubMed

Ulhassan, Waqar; Sandahl, Christer; Westerlund, Hugo; Henriksson, Peter; Bennermo, Marie; von Thiele Schwarz, Ulrica; Thor, Johan

2013-01-01

Despite the reported success of Lean in health care settings, it is unclear why and how organizations adopt Lean and how Lean transforms work design and, in turn, affects employees' work. This study investigated a cardiology department's journey to adopt and adapt Lean. The investigation was focused on the rationale and evolution of the Lean adoption to illuminate how a department with a long quality improvement history arrived at the decision to introduce Lean, and how Lean influenced employees' daily work. This is an explanatory single case study based on semistructured interviews, nonparticipant observations, and document studies. Guided by a Lean model, we undertook manifest content analysis of the data. We found that previous improvement efforts may facilitate the introduction of Lean but may be less important when forecasting whether Lean will be sustained over time. Contextual factors seemed to influence both what Lean tools were implemented and how well the changes were sustained. For example, adoption of Lean varied with the degree to which staff saw a need for change. Work redesign and teamwork were found helpful to improve patient care whereas problem solving was found helpful in keeping the staff engaged and sustaining the results over time.

Illusion or delusion--Lean management in the health sector.

PubMed

McIntosh, Bryan; Sheppy, Bruce; Cohen, Ivan

2014-01-01

There has been considerable interest in the implementation of practices imported from manufacturing into healthcare as a solution to rising healthcare spending and disappointing patient safety indicators. One approach that has attracted particular interest is Lean management and the purpose of this paper is to engage with this topic. Secondary research. Despite widespread enthusiasm about the potential of Lean management processes, evidence about its contribution to higher organisational performance remains inconsistent. This paper engages with the major Lean concepts of operations management and human resource management, including just-in-time, total quality management, total productive maintenance and does not engage in-depth with concepts related to employee empowerment, and training This paper contributes to the organisational management literature in healthcare by showing that although Lean management seems to have the potential to improve organisational performance it is far from a panacea against under performing hospitals. It informs policy making by suggesting that a progressive managerial philosophy has a stronger impact on healthcare performance than the adoption of practices from any particular managerial approach. This paper provides a critical evaluation of the impact of Lean practices in informing healthcare policy. The paper contributes to the organisational management literature in healthcare by showing that even though Lean management in healthcare appears to have the potential to improve organisational performance; there remain problems with its application.

Lean Manufacturing Principles Improving the Targeting Process

DTIC Science & Technology

2012-06-08

author has familiarity with Lean manufacturing principles. Third, Lean methods have been used in different industries and have proven adaptable to the...92 The case study also demonstrates the multi organizational application of VSM, JIT and the 5S method ...new members not knowing the process, this will serve as a start point for the developing of understanding. Within the Food industry we observed “the

Effect of combination treatment of S–amlodipine with peroxisome proliferator-activated receptor agonists on metabolic and cardiovascular parameters in Zucker fa/fa rats

PubMed Central

2014-01-01

Background Type 2 diabetes is a complex metabolic disorder characterized by hyperglycemia, impaired glucose tolerance and insulin resistance associated with dyslipidemia and hypertension. The available drugs are not sufficiently efficacious in reducing cardiovascular risk and restoring normal glucose metabolism associated with type 2 diabetes as a mono- or a combination therapy. The present study examined the combined effects of an antihypertensive (S-Amlodipine) and an insulin-sensitizing agent, peroxisome proliferator-activated receptor (PPAR) agonists (Pioglitazone and Ragaglitazar), on cardiovascular risk factors in aged diabetic and insulin-resistant Zucker fa/fa rats. Methods Following combination treatment for 14 days, blood pressure (BP), serum glucose, total cholesterol and triglycerides were measured. Aortic ring study was conducted to determine the effect of combination treatments on phenylephrine-induced vasoconstriction and acetylcholine (Ach)-induced vasorelaxation. Results In combination, S-Amlodipine and Pioglitazone significantly reduced blood glucose (115.1 ± 6.6 vs. 81.7 ± 4.2), BP (184.4 ± 5.0 vs. 155.1 ± 5.0), serum triglycerides (362.5 ± 47.5 vs. 211.1 ± 23.7) and glucose intolerance when compared with vehicle treated Zucker fa/fa rats. Similar results were observed with the combination of S-Amlodipine and Ragaglitazar (Triglycerides, 362.5 ± 47.5 vs. 252.34 ± 27.86; BP, 184.4 ± 5.0 vs. 159.0 ± 8.0) except for serum glucose. ACh-induced vasorelaxation in aortic rings was also superior with both of the combinations compared to individual treatment. Furthermore, there was less body weight gain and food intake with S-Amlodipine and Pioglitazone combination in Zucker fa/fa rats. S-Amlodipine itself caused significant reduction in glucose (115.1 ± 6.6 vs. 89.7 ± 2.7) and BP (184.4 ± 5.0 vs. 156.1 ± 4.0) with improvement in insulin sensitivity observed through oral glucose

NO{sub x}-abatement potential of lean-premixed GT combustors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sattelmayer, T.; Polifke, W.; Winkler, D.

1998-01-01

The influence of the structure of perfectly premixed flames on NO{sub x} formation is investigated theoretically. Since a network of reaction kinetics modules and model flames is used for this purpose, the results obtained are independent of specific burner geometries. Calculations are presented for a mixture temperature of 630 K, an adiabatic flame temperature of 1840 K, and 1 and 15 bars combustor pressure. In particular, the following effects are studied separately from each other: molecular diffusion of temperature and species, flame strain, local quench in highly strained flames and subsequent reignition, turbulent diffusion (no preferential diffusion), and small scalemore » mixing (stirring) in the flame front. Either no relevant influence or an increase in NO{sub x} burners is to avoid excessive turbulent stirring in the flame front. Turbulent flames that exhibit locally and instantaneously near laminar structures (flamelets) appear to be optimal. Using the same methodology, the scope of the investigation is extended to lean-lean staging, since a higher NO{sub x}-abatement potential can be expected in principle. As long as the chemical reactions of the second stage take place in the boundary between the fresh mixture of the second stage and the combustion products from upstream, no advantage can be expected from lean-lean staging. Only if the preliminary burner exhibits much poorer mixing than the second stage can lean-lean staging be beneficial. In contrast, if full mixing between the two stages prior to afterburning can be achieved (lean-mix-lean technique), the combustor outlet temperature can in principle be increased somewhat without NO penalty.« less

Case study of lean manufacturing application in a die casting manufacturing company

NASA Astrophysics Data System (ADS)

Ching, Ng Tan; Hoe, Clarence Chan Kok; Hong, Tang Sai; Ghobakhloo, Morteza; Pin, Chen Kah

2015-05-01

The case study of lean manufacturing aims to study the application of lean manufacturing in a die casting manufacturing company located in Pulau Penang, Malaysia. This case study describes mainly about the important concepts and applications of lean manufacturing which could gradually help the company in increasing the profit by studying and analyzing their current manufacturing process and company culture. Many approaches of lean manufacturing are studied in this project which includes: 5S housekeeping, Kaizen, and Takt Time. Besides, the lean tools mentioned, quality tool such as the House of Quality is being used as an analysis tool to continuously improve the product quality. In short, the existing lean culture in the company is studied and analyzed, with recommendations written at the end of this paper.

Lean for Government: Eliminating the Seven Wastes

NASA Technical Reports Server (NTRS)

Shepherd, Christena C.

2012-01-01

With shrinking budgets and a slow economy, it is becoming increasingly important for all government agencies to become more efficient. Citizens expect and deserve efficient and effective services from federal, state and local government agencies. One of the best methods to improve efficiency and eliminate waste is to institute the business process improvement methodologies known collectively as Lean; however, with reduced budgets, it may not be possible to train everyone in Lean or to engage the services of a trained consultant. It is possible, however, to raise awareness of the "Seven Wastes" of Lean in each employee, and encourage them to identify areas for improvement. Management commitment is vital to the success of these initiatives, and it is also important to develop the right metrics that will track the success of these changes.

Lean for Education

ERIC Educational Resources Information Center

LeMahieu, Paul G.; Nordstrum, Lee E.; Greco, Patricia

2017-01-01

Purpose: This paper is one of seven in this volume that aims to elaborate different approaches to quality improvement in education. It delineates a methodology called Lean for Education. Design/methodology/approach: The paper presents the origins, theoretical foundations, core concepts and a case study demonstrating an application in US education,…

Use of leaning vanes in a two stage fan

NASA Technical Reports Server (NTRS)

Rao, G. V. R.; Digumarthi, R. V.

1975-01-01

The use of leaning vanes for tone noise reduction was examined in terms of their application in a typical two-stage high pressure ratio fan. In particular for stages designed with outlet guide vanes and zero swirl between stages, leaning the vanes of the first stage stator was studied, since increasing the number of vanes and the gap between stages do not provide the desired advantage. It was shown that noise reduction at higher harmonics of blade passing frequency can be obtained by leaning the vanes.

Medical and scientific writing: Time to go lean and mean.

PubMed

Bhardwaj, Payal; Sinha, Sudip; Yadav, Raj Kumar

2017-01-01

The Lean Six Sigma methodology for process improvements and driving efficiency is old, but lean writing was adopted late by the pharmaceutical world in terms of size of the documents. The documents were lean earlier, and then became voluminous, and now we are about to complete a full circle in this regard, i.e., coming back to the lean documents again using e-formats and hyperlinking. Furthermore, writing has become more and more precise over time. The need for this lean and mean medical and scientific writing arose from voluminous research globally, both industry and academia which are abuzz with skyrocketing regulatory and scientific submission volumes. The quantum of literature is so much that reviewers or information seekers firmly believe that going through even selected and relevant literature has become highly challenging. Considering this, there has been much insistence on downsizing the medical writing documents, which could be tempting enough to be leveraged for scientific publications as well. Here, we present the need for lean and mean medical writing, discuss this concept in relation to the pharmaceutical industry, and how to apply this to key documents. Furthermore, presented is the proposed algorithm for lean and mean clinical study reports and manuscripts. These thoughts are aligned to the recently established concept of data transparency, and can be easily achieved by web links between the protocols and clinical trial results disclosed publicly, and the corresponding manuscripts.

Medical and scientific writing: Time to go lean and mean

PubMed Central

Bhardwaj, Payal; Sinha, Sudip; Yadav, Raj Kumar

2017-01-01

The Lean Six Sigma methodology for process improvements and driving efficiency is old, but lean writing was adopted late by the pharmaceutical world in terms of size of the documents. The documents were lean earlier, and then became voluminous, and now we are about to complete a full circle in this regard, i.e., coming back to the lean documents again using e-formats and hyperlinking. Furthermore, writing has become more and more precise over time. The need for this lean and mean medical and scientific writing arose from voluminous research globally, both industry and academia which are abuzz with skyrocketing regulatory and scientific submission volumes. The quantum of literature is so much that reviewers or information seekers firmly believe that going through even selected and relevant literature has become highly challenging. Considering this, there has been much insistence on downsizing the medical writing documents, which could be tempting enough to be leveraged for scientific publications as well. Here, we present the need for lean and mean medical writing, discuss this concept in relation to the pharmaceutical industry, and how to apply this to key documents. Furthermore, presented is the proposed algorithm for lean and mean clinical study reports and manuscripts. These thoughts are aligned to the recently established concept of data transparency, and can be easily achieved by web links between the protocols and clinical trial results disclosed publicly, and the corresponding manuscripts. PMID:28828305

Correlates of increased lean muscle mass in women with polycystic ovary syndrome.

PubMed

Carmina, E; Guastella, E; Longo, R A; Rini, G B; Lobo, R A

2009-10-01

Muscle mass plays an important role in determining cardiovascular and metabolic risks in polycystic ovary syndrome (PCOS). In addition, whether lean mass influences carotid intima-media thickness (IMT) in PCOS has not been assessed. Prospective investigation. Ninety-five women with PCOS were age- and weight-matched to 90 ovulatory controls. All women had dual X-ray absorptiometry for lean, fat and bone mass, and bone mass density (BMD). Serum testosterone, sex hormone-binding globulin, insulin, and glucose and carotid IMT were determined. Free androgen index (FAI) and insulin resistance (by QUICKI) were calculated. In PCOS, waist circumference and insulin were higher and QUICKI lower than in controls (P<0.01). Trunk fat mass, % trunk fat, and lean mass were higher in PCOS compared to controls (P<0.01), while total bone mass and BMD were similar. IMT was increased in PCOS (P<0.01) but only 15% of PCOS patients had abnormal (> or = 0.9 mm) values. Lean mass correlated with fat parameters, insulin, QUICKI, and FAI, but not with total testosterone; and after adjustments for insulin and QUICKI, lean mass still correlated with fat mass (P<0.01) but not FAI. Lean mass correlated with IMT (P<0.01), but this was dependent on insulin. However, excluding those patients with abnormal IMT values, IMT correlated with lean mass independently of insulin. Bone mass correlated with lean and fat mass, but not with insulin or androgen. PCOS patients with 'pathological' IMT values had higher % trunk fat, lean mass, and insulin, lower QUICKI, and higher testosterone and FAI compared with those with normal IMT. Lean mass is increased in PCOS, while bone mass is similar to that of matched controls. The major correlates of lean mass are fat mass and insulin but not androgen. Lean mass also correlated with IMT, and although influenced by insulin, small changes in IMT may partially reflect changes in muscle mass, while clearly abnormal values relate to more severe abnormalities of PCOS.

The productive operating theatre and lean thinking systems.

PubMed

Kasivisvanathan, R; Chekairi, A

2014-11-01

The concept of 'lean thinking' first originated in the manufacturing industry as a means of improving productivity whilst maintaining quality through eliminating wasteful processes. The purpose of this article is to demonstrate how the principles of 'lean thinking' are relevant to healthcare and the operating theatre, with reference to our own institutional experience.

Scaling Lean in primary care: impacts on system performance.

PubMed

Hung, Dorothy Y; Harrison, Michael I; Martinez, Meghan C; Luft, Harold S

2017-03-01

We examined a wide range of performance outcomes after Lean methodology-a leading strategy to enhance efficiency and patient value-was implemented and scaled across all primary care clinics in a nonprofit, ambulatory care delivery system. Using a stepped wedge approach, we assessed changes associated with the phased introduction of Lean-based redesigns across 46 primary care departments in 17 different clinic locations. Longitudinal analysis of operational metrics included: workflow efficiency, physician productivity, operating expenses, clinical quality, and satisfaction among patients, physicians, and staff. We used interrupted time series analysis with generalized linear mixed models to estimate Lean impacts over time. Projected outcomes in the absence of changes (ie, counterfactuals) were compared with observed outcomes after Lean redesigns were implemented, and mean differences were assessed using 95% bias-corrected bootstrap confidence intervals (CIs). We observed systemwide improvements in workflow efficiencies (eg, 95% CI, 5.8-10.4) and physician productivity (95% CI, 3.9-27.2), with no adverse effects on clinical quality. Patient satisfaction increased with respect to access to care (95% CI, 15.2-20.7), handling of personal issues (95% CI, 2.1-6.9), and overall experience of care (95% CI, 11.0-17.0), but decreased with respect to interactions with care providers (95% CI, -13.4 to -5.7). Departmental operating costs decreased, and annual staff and physician satisfaction scores increased particularly among early adopters, with key improvements in employee engagement, connection to purpose, relationships with staff, and physician time spent working. Lean redesigns can benefit primary care patients, physicians, and staff without negatively impacting the quality of clinical care. Study results may lead other delivery system leaders to innovate using Lean techniques and may further enhance support for Lean learning among public and private payers.

Improving the medical records department processes by lean management

PubMed Central

Ajami, Sima; Ketabi, Saeedeh; Sadeghian, Akram; Saghaeinnejad-Isfahani, Sakine

2015-01-01

Background: Lean management is a process improvement technique to identify waste actions and processes to eliminate them. The benefits of Lean for healthcare organizations are that first, the quality of the outcomes in terms of mistakes and errors improves. The second is that the amount of time taken through the whole process significantly improves. Aims: The purpose of this paper is to improve the Medical Records Department (MRD) processes at Ayatolah-Kashani Hospital in Isfahan, Iran by utilizing Lean management. Materials and Methods: This research was applied and an interventional study. The data have been collected by brainstorming, observation, interview, and workflow review. The study population included MRD staff and other expert staff within the hospital who were stakeholders and users of the MRD. Statistical Analysis Used: The MRD were initially taught the concepts of Lean management and then formed into the MRD Lean team. The team then identified and reviewed the current processes subsequently; they identified wastes and values, and proposed solutions. Results: The findings showed that the MRD units (Archive, Coding, Statistics, and Admission) had 17 current processes, 28 wastes, and 11 values were identified. In addition, they offered 27 comments for eliminating the wastes. Conclusion: The MRD is the critical department for the hospital information system and, therefore, the continuous improvement of its services and processes, through scientific methods such as Lean management, are essential. Originality/Value: The study represents one of the few attempts trying to eliminate wastes in the MRD. PMID:26097862

Improving the medical records department processes by lean management.

PubMed

Ajami, Sima; Ketabi, Saeedeh; Sadeghian, Akram; Saghaeinnejad-Isfahani, Sakine

2015-01-01

Lean management is a process improvement technique to identify waste actions and processes to eliminate them. The benefits of Lean for healthcare organizations are that first, the quality of the outcomes in terms of mistakes and errors improves. The second is that the amount of time taken through the whole process significantly improves. The purpose of this paper is to improve the Medical Records Department (MRD) processes at Ayatolah-Kashani Hospital in Isfahan, Iran by utilizing Lean management. This research was applied and an interventional study. The data have been collected by brainstorming, observation, interview, and workflow review. The study population included MRD staff and other expert staff within the hospital who were stakeholders and users of the MRD. The MRD were initially taught the concepts of Lean management and then formed into the MRD Lean team. The team then identified and reviewed the current processes subsequently; they identified wastes and values, and proposed solutions. The findings showed that the MRD units (Archive, Coding, Statistics, and Admission) had 17 current processes, 28 wastes, and 11 values were identified. In addition, they offered 27 comments for eliminating the wastes. The MRD is the critical department for the hospital information system and, therefore, the continuous improvement of its services and processes, through scientific methods such as Lean management, are essential. The study represents one of the few attempts trying to eliminate wastes in the MRD.

Joint Feedback Analysis Modeling of Nonesterified Fatty Acids in Obese Zucker Rats and Normal Sprague–Dawley Rats after Different Routes of Administration of Nicotinic Acid

PubMed Central

Tapani, Sofia; Almquist, Joachim; Leander, Jacob; Ahlström, Christine; Peletier, Lambertus A; Jirstrand, Mats; Gabrielsson, Johan

2014-01-01

Data were pooled from several studies on nicotinic acid (NiAc) intervention of fatty acid turnover in normal Sprague–Dawley and obese Zucker rats in order to perform a joint PKPD of data from more than 100 normal Sprague–Dawley and obese Zucker rats, exposed to several administration routes and rates. To describe the difference in pharmacodynamic parameters between obese and normal rats, we modified a previously published nonlinear mixed effects model describing tolerance and oscillatory rebound effects of NiAc on nonesterified fatty acids plasma concentrations. An important conclusion is that planning of experiments and dose scheduling cannot rely on pilot studies on normal animals alone. The obese rats have a less-pronounced concentration–response relationship and need higher doses to exhibit desired response. The relative level of fatty acid rebound after cessation of NiAc administration was also quantified in the two rat populations. Building joint normal-disease models with scaling parameter(s) to characterize the “degree of disease” can be a useful tool when designing informative experiments on diseased animals, particularly in the preclinical screen. Data were analyzed using nonlinear mixed effects modeling, for the optimization, we used an improved method for calculating the gradient than the usually adopted finite difference approximation. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:2571–2584, 2014 PMID:24986056

Individualisation of Lean Concept in Companies Dealing with Mass Production

NASA Astrophysics Data System (ADS)

Bednár, Roman

2012-12-01

The methods of lean manufacturing primarily designed for businesses dealing with serial production, are also used in other types of production. However the concept of lean production was not designed for these types of businesses, they are utilized only partially. Paper focuses on applying methods of lean concept in companies which are dealing with mass production and their options of exchange for other methods in the event of disagreement. Basis of the article is a list of lean methods with its description and its utilization in practice. The questionnaire was utilized to identify information from the practice. Based on this survey were identified the critical methods that are no longer appropriate for companies dealing with mass production. However, there are alternative methods of describing the problem. It is possible to say that companies are trying to get closer to their goal by modification of the basic concepts. And the concept of Lean Enterprise serves as a standard.

Lean and leadership practices: development of an initial realist program theory.

PubMed

Goodridge, Donna; Westhorp, Gill; Rotter, Thomas; Dobson, Roy; Bath, Brenna

2015-09-07

Lean as a management system has been increasingly adopted in health care settings in an effort to enhance quality, capacity and safety, while simultaneously containing or reducing costs. The Ministry of Health in the province of Saskatchewan, Canada has made a multi-million dollar investment in Lean initiatives to create "better health, better value, better care, and better teams", affording a unique opportunity to advance our understanding of the way in which Lean philosophy, principles and tools work in health care. In order to address the questions, "What changes in leadership practices are associated with the implementation of Lean?" and "When leadership practices change, how do the changed practices contribute to subsequent outcomes?", we used a qualitative, multi-stage approach to work towards developing an initial realist program theory. We describe the implications of realist assumptions for evaluation of this Lean initiative. Formal theories including Normalization Process Theory, Theories of Double Loop and Organization Leaning and the Theory of Cognitive Dissonance help understand this initial rough program theory. Data collection included: key informant consultation; a stakeholder workshop; documentary review; 26 audiotaped and transcribed interviews with health region personnel; and team discussions. A set of seven initial hypotheses regarding the manner in which Lean changes leadership practices were developed from our data. We hypothesized that Lean, as implemented in this particular setting, changes leadership practices in the following ways. Lean: a) aligns the aims and objectives of health regions; b) authorizes attention and resources to quality improvement and change management c) provides an integrated set of tools for particular tasks; d) changes leaders' attitudes or beliefs about appropriate leadership and management styles and behaviors; e) demands increased levels of expertise, accountability and commitment from leaders; f) measures and

Intermittent hypoxia induces hyperlipidemia in lean mice.

PubMed

Li, Jianguo; Thorne, Laura N; Punjabi, Naresh M; Sun, Cheuk-Kwan; Schwartz, Alan R; Smith, Philip L; Marino, Rafael L; Rodriguez, Annabelle; Hubbard, Walter C; O'Donnell, Christopher P; Polotsky, Vsevolod Y

2005-09-30

Obstructive sleep apnea, a syndrome leading to recurrent intermittent hypoxia (IH), has been associated previously with hypercholesterolemia, independent of underlying obesity. We examined the effects of experimentally induced IH on serum lipid levels and pathways of lipid metabolism in the absence and presence of obesity. Lean C57BL/6J mice and leptin-deficient obese C57BL/6J-Lep(ob) mice were exposed to IH for five days to determine changes in serum lipid profile, liver lipid content, and expression of key hepatic genes of lipid metabolism. In lean mice, exposure to IH increased fasting serum levels of total cholesterol, high-density lipoprotein (HDL) cholesterol, phospholipids (PLs), and triglycerides (TGs), as well as liver TG content. These changes were not observed in obese mice, which had hyperlipidemia and fatty liver at baseline. In lean mice, IH increased sterol regulatory element binding protein 1 (SREBP-1) levels in the liver, increased mRNA and protein levels of stearoyl-coenzyme A desaturase 1 (SCD-1), an important gene of TG and PL biosynthesis controlled by SREBP-1, and increased monounsaturated fatty acid content in serum, which indicated augmented SCD-1 activity. In addition, in lean mice, IH decreased protein levels of scavenger receptor B1, regulating uptake of cholesterol esters and HDL by the liver. We conclude that exposure to IH for five days increases serum cholesterol and PL levels, upregulates pathways of TG and PL biosynthesis, and inhibits pathways of cholesterol uptake in the liver in the lean state but does not exacerbate the pre-existing hyperlipidemia and metabolic disturbances in leptin-deficient obesity.

Trunk lean gait decreases multi-segmental coordination in the vertical direction.

PubMed

Tokuda, Kazuki; Anan, Masaya; Sawada, Tomonori; Tanimoto, Kenji; Takeda, Takuya; Ogata, Yuta; Takahashi, Makoto; Kito, Nobuhiro; Shinkoda, Koichi

2017-11-01

[Purpose] The strategy of trunk lean gait to reduce external knee adduction moment (KAM) may affect multi-segmental synergy control of center of mass (COM) displacement. Uncontrolled manifold (UCM) analysis is an evaluation index to understand motor variability. The purpose of this study was to investigate how motor variability is affected by using UCM analysis on adjustment of the trunk lean angle. [Subjects and Methods] Fifteen healthy young adults walked at their preferred speed under two conditions: normal and trunk lean gait. UCM analysis was performed with respect to the COM displacement during the stance phase. The KAM data were analyzed at the points of the first KAM peak during the stance phase. [Results] The KAM during trunk lean gait was smaller than during normal gait. Despite a greater segmental configuration variance with respect to mediolateral COM displacement during trunk lean gait, the synergy index was not significantly different between the two conditions. The synergy index with respect to vertical COM displacement during trunk lean gait was smaller than that during normal gait. [Conclusion] These results suggest that trunk lean gait is effective in reducing KAM; however, it may decrease multi-segmental movement coordination of COM control in the vertical direction.

Lean Management—The Journey from Toyota to Healthcare

PubMed Central

Teich, Sorin T.; Faddoul, Fady F.

2013-01-01

The evolution of production systems is tightly linked to the story of Toyota Motor Company (TMC) that has its roots around 1918. The term “lean” was coined in 1990 following the exploration of the Toyota model that led to the “transference” thesis sustaining the concept that manufacturing problems and technologies are universal problems faced by management and that these concepts can be emulated in non-Japanese enterprises. Lean is a multi-faceted concept and requires organizations to exert effort along several dimensions simultaneously; some consider a successful implementation either achieving major strategic components of lean, implementing practices to support operational aspects, or providing evidence that the improvements are sustainable in the long term. The article explores challenges and opportunities faced by organizations that intend incorporating lean management principles and presents the specific context of the healthcare industry. Finally, the concepts of “essential few” and customer value are illustrated through a simple example of process change following lean principles, which was implemented in a dental school in the United States. PMID:23908857

[Lean logistics management in healthcare: a case study].

PubMed

Aguilar-Escobar, V G; Garrido-Vega, P

2013-01-01

To study the applicability of the principles of Lean Production to manage the supply chain of a hospital. In particular, to determine which Lean practices and principles are applicable, the benefits obtained and the main barriers for its implementation. Managing the hospital supply chain is an important issue, both for its effect on the quality of care and its impact on costs. This study is based on a case study. 2005-10. Hospital Virgen Macarena in Seville. Process of implementing a comprehensive logistics management plan based on Lean principles and technological investments. The implementation of the comprehensive plan has reduced inventory, decreased lead times and improved service quality. Also, there have been other important improvements: enhanced employee satisfaction and increased staff productivity, both dedicated to health and the logistics. The experience analysed has shown the applicability and appropriateness of Lean principles and some of its techniques in managing the logistics of hospitals. It also identifies some of the main difficulties that may arise. Copyright © 2011 SECA. Published by Elsevier Espana. All rights reserved.

Lean Production as an Innovative Approach to Construction

NASA Astrophysics Data System (ADS)

Spišáková, Marcela; Kozlovská, Mária

2013-06-01

Lean production presents a new approach to the construction management which has enabled enterprises to attain very high levels of efficiency, competitiveness and flexibility in production systems. Nowadays, a number of industrial processes are managed in accordance with these advanced management principles [1]. The principles of lean production are applied within the integrated design and delivery solutions (IDDS) and prefabricated construction. IDDS uses collaborative work processes and enhanced skills, with integrated data, information, and knowledge management to minimize structural and process inefficiencies and to enhance the value delivered during design, build, and operation, and across projects. Prefabrication presents a one of opportunities for construction methods, which allows the compliance with principles of sustainable design, provides the potential benefits such as faster construction, fewer housing defects, reduction in energy use and waste and elimination of environmental and safety risks. This paper presents the lean production within the IDDS and its potential in the modern prefabrication. There is created a field providing of benefits of lean production in construction industry.

Lean direct wall fuel injection method and devices

NASA Technical Reports Server (NTRS)

Choi, Kyung J. (Inventor); Tacina, Robert (Inventor)

2000-01-01

A fuel combustion chamber, and a method of and a nozzle for mixing liquid fuel and air in the fuel combustion chamber in lean direct injection combustion for advanced gas turbine engines, including aircraft engines. Liquid fuel in a form of jet is injected directly into a cylindrical combustion chamber from the combustion chamber wall surface in a direction opposite to the direction of the swirling air at an angle of from about 50.degree. to about 60.degree. with respect to a tangential line of the cylindrical combustion chamber and at a fuel-lean condition, with a liquid droplet momentum to air momentum ratio in the range of from about 0.05 to about 0.12. Advanced gas turbines benefit from lean direct wall injection combustion. The lean direct wall injection technique of the present invention provides fast, uniform, well-stirred mixing of fuel and air. In addition, in order to further improve combustion, the fuel can be injected at a venturi located in the combustion chamber at a point adjacent the air swirler.

Guiding inpatient quality improvement: a systematic review of Lean and Six Sigma.

PubMed

Glasgow, Justin M; Scott-Caziewell, Jill R; Kaboli, Peter J

2010-12-01

Two popular quality improvement (QI) approaches in health care are Lean and Six Sigma. Hospitals continue to adopt these QI approaches-or the hybrid Lean Sigma approach-with little knowledge on how well they produce sustainable improvements. A systematic literature review was conducted to determine whether Lean, Six Sigma, or Lean Sigma have been effectively used to create and sustain improvements in the acute care setting. Databases were searched for articles published in the health care, business, and engineering literatures. Study inclusion criteria required identification of a Six Sigma, Lean, or Lean Sigma project; QI efforts focused on hospitalized patients; descriptions of project improvements; and reported results. Depending on the quality of data reported, articles were classified as summary reports, pre-post observational studies, or time-series reports. Database searches identified 539 potential articles. After review of titles, abstracts, and full text, 47 articles met inclusion criteria--10 articles summarized multiple projects, 12 reported Lean projects, 20 reported Six Sigma projects, and 5 reported Lean Sigma projects. Generally, the studies provided limited data, with only 15 articles providing any sort of follow-up data; of the 15, only 3 report a follow-up period greater than two years. Lean, Six Sigma, and Lean Sigma as QI approaches can aid institutions in tackling a wide variety of problems encountered in acute care. However, the true impact of these approaches is difficult to judge, given that the lack of rigorous evaluation or clearly sustained improvements provides little evidence supporting broad adoption. There is still a need for future work that will improve the evidence base for understanding more about QI approaches and how to achieve sustainable improvement.

Differences in fairness and trust between lean and corpulent men.

PubMed

Kubera, B; Klement, J; Wagner, C; Rädel, C; Eggeling, J; Füllbrunn, S; Kaczmarek, M C; Levinsky, R; Peters, A

2016-11-01

Employment disparities are known to exist between lean and corpulent people, for example, corpulent people are less likely to be hired and get lower wages. The reasons for these disparities between weight groups are not completely understood. We hypothesize (i) that economic decision making differs between lean and corpulent subjects, (ii) that these differences are influenced by peoples' blood glucose concentrations and (iii) by the body weight of their opponents. A total of 20 lean and 20 corpulent men were examined, who performed a large set of economic games (ultimatum game, trust game and risk game) under euglycemic and hypoglycemic conditions induced by the glucose clamp technique. In the ultimatum game, lean men made less fair decisions and offered 16% less money than corpulent men during euglycemia (P=0.042). During hypoglycemia, study participants of both weight groups accepted smaller amounts of money than during euglycemia (P=0.031), indicating that a lack of energy makes subjects to behave more like a Homo Economicus. In the trust game, lean men allocated twice as much money to lean than to corpulent trustees during hypoglycemia (P<0.001). Risk-seeking behavior did not differ between lean and corpulent men. Our data show that economic decision making is affected by both, the body weight of the participants and the body weight of their opponents, and that blood glucose concentrations should be taken into consideration when analyzing economic decision making. When relating these results to the working environment, the weight bias in economic decision making may be also relevant for employment disparities.

Relationship-centered health care as a Lean intervention.

PubMed

Dunsford, Jennifer; Reimer, Laura E

2017-12-01

Continuous improvement efforts, recognized in much literature as Lean management techniques have been used in efforts to improve efficiency in democratic health care contexts for some time to varying degrees of success. The complexity of the health care system is magnified by the sheer number of processes and sub processes required to deliver value within a bureaucratic environment, while maintaining some level of compassionate and personalized care. There is inherent tension between what is required to be efficient and what is required to be caring and this conflict presses against Lean practice at the level of delivery.Administration and care intersect at the point of the patient's experience. In order to achieve the dual goals of improved value and lower costs, the application of Lean thinking for meaningful health care reform must acknowledge the fundamental dichotomy between the impersonal tasks required to provide health services, and human interactions. Meaningful health care reform requires an acknowledgement of this distinction, currently not recognized in literature. While administrative process improvements are necessary, they are insufficient to achieve a sustainable and caring health care system. Lean thinking must be applied differently for administrative processes and patient care encounters, because these are fundamentally different processes. In this way, Lean principles will effectively contribute to sustainable health system improvements. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Alcohol produces distinct hepatic lipidome and eicosanoid signature in lean and obese[S

PubMed Central

Puri, Puneet; Xu, Jun; Vihervaara, Terhi; Katainen, Riikka; Ekroos, Kim; Daita, Kalyani; Min, Hae-Ki; Joyce, Andrew; Mirshahi, Faridoddin; Tsukamoto, Hidekazu; Sanyal, Arun J.

2016-01-01

Alcohol- and obesity-related liver diseases often coexist. The hepatic lipidomics due to alcohol and obesity interaction is unknown. We characterized the hepatic lipidome due to 1) alcohol consumption in lean and obese mice and 2) obesity and alcohol interactions. In the French-Tsukamoto mouse model, intragastric alcohol or isocaloric dextrose were fed with either chow (lean) or high-fat, high-cholesterol diet (obese). Four groups (lean, lean alcohol, obese, and obese alcohol) were studied. MS was performed for hepatic lipidomics, and data were analyzed. Alcohol significantly increased hepatic cholesteryl esters and diacyl­glycerol in lean and obese but was more pronounced in obese. Alcohol produced contrasting changes in hepatic phospholipids with significant enrichment in lean mice versus significant decrease in obese mice, except phosphatidylglycerol, which was increased in both lean and obese alcohol groups. Most lysophospholipids were increased in lean alcohol and obese mice without alcohol use only. Prostaglandin E2; 5-, 8-, and 11-hydroxyeicosatetraenoic acids; and 9- and 13-hydroxyoctadecadienoic acids were considerably increased in obese mice with alcohol use. Alcohol consumption produced distinct changes in lean and obese with profound effects of obesity and alcohol interaction on proinflammatory and oxidative stress-related eicosanoids. PMID:27020313

Lean methodology: supporting battlefield medical fitness by cutting process waste.

PubMed

Huggins, Elaine J

2010-01-01

Healthcare has long looked at decreasing risk in communication and patient care processes. Increasing the simplicity in communication and patient care process is a newer concept contained in Lean methodology. Lean is a strategy for achieving improvement in performance through the elimination of steps that use resources without contributing to customer value. This is known as cutting waste or nonvalue added steps. This article outlines how the use of Lean improved a key process that supports battlefield medical fitness.

Lean, premixed, prevaporized combustion for aircraft gas turbine engines

NASA Technical Reports Server (NTRS)

Mularz, E. J.

1979-01-01

The application of lean, premixed, prevaporized combustion to aircraft turbine engine systems can result in benefits in terms of superior combustion performance, improved combustor and turbine durability, and environmentally acceptable pollutant emissions. Lean, premixed prevaporized combustion is particularly attractive for reducing the oxides of nitrogen emissions during high altitude cruise. The NASA stratospheric cruise emission reduction program will evolve and demonstrate lean, premixed, prevaporized combustion technology for aircraft engines. This multiphased program is described. In addition, the various elements of the fundamental studies phase of the program are reviewed, and results to date of many of these studies are summarized.

Effects of interval aerobic training combined with strength exercise on body composition, glycaemic and lipid profile and aerobic capacity of obese rats.

PubMed

Coll-Risco, Irene; Aparicio, Virginia A; Nebot, Elena; Camiletti-Moirón, Daniel; Martínez, Rosario; Kapravelou, Garyfallia; López-Jurado, María; Porres, Jesús M; Aranda, Pilar

2016-08-01

The purpose of this study was to investigate the effects of interval aerobic training combined with strength exercise in the same training session on body composition, and glycaemic and lipid profile in obese rats. Sixteen lean Zucker rats and sixteen obese Zucker rats were randomly divided into exercise and sedentary subgroups (4 groups, n = 8). Exercise consisted of interval aerobic training combined with strength exercise in the same training session. The animals trained 60 min/day, 5 days/week for 8 weeks. Body composition, lipid and glycaemic profiles and inflammatory markers were assessed. Results showed that fat mass was reduced in both lean and obese rats following the exercise training (effect size (95% confidence interval (CI)) = 1.8 (0.5-3.0)). Plasma low-density lipoprotein-cholesterol and fasting glucose were lower in the exercise compared to the sedentary groups (d = 2.0 (0.7-3.2) and 1.8 (0.5-3.0), respectively). Plasma insulin was reduced in exercise compared to sedentary groups (d = 2.1 (0.8-3.4)). Some exercise × phenotype interactions showed that the highest decreases in insulin, homeostatic model assessment-insulin resistance, fasting and postprandial glucose were observed in the obese + exercise group (all, P < 0.01). The findings of this study suggest that interval aerobic training combined with strength exercise would improve body composition, and lipid and glycaemic profiles, especially in obese rats.

Laboratory studies of lean combustion

NASA Technical Reports Server (NTRS)

Sawyer, R. F.; Schefer, R. W.; Ganji, A. R.; Daily, J. W.; Pitz, R. W.; Oppenheim, A. K.; Angeli, J. W.

1977-01-01

The fundamental processes controlling lean combustion were observed for better understanding, with particular emphasis on the formation and measurement of gas-phase pollutants, the stability of the combustion process (blowout limits), methods of improving stability, and the application of probe and optical diagnostics for flow field characterization, temperature mapping, and composition measurements. The following areas of investigation are described in detail: (1) axisymmetric, opposed-reacting-jet-stabilized combustor studies; (2) stabilization through heat recirculation; (3) two dimensional combustor studies; and (4) spectroscopic methods. A departure from conventional combustor design to a premixed/prevaporized, lean combustion configuration is attractive for the control of oxides of nitrogen and smoke emissions, the promotion of uniform turbine inlet temperatures, and, possibly, the reduction of carbon monoxide and hydrocarbons at idle.

Risk Factors for the Loss of Lean Body Mass After Gastrectomy for Gastric Cancer.

PubMed

Aoyama, Toru; Sato, Tsutomu; Segami, Kenki; Maezawa, Yukio; Kano, Kazuki; Kawabe, Taiichi; Fujikawa, Hirohito; Hayashi, Tsutomu; Yamada, Takanobu; Tsuchida, Kazuhito; Yukawa, Norio; Oshima, Takashi; Rino, Yasushi; Masuda, Munetaka; Ogata, Takashi; Cho, Haruhiko; Yoshikawa, Takaki

2016-06-01

Lean body mass loss after surgery, which decreases the compliance of adjuvant chemotherapy, is frequently observed in gastric cancer patients who undergo gastrectomy for gastric cancer. However, the risk factors for loss of lean body mass remain unclear. The current study retrospectively examined the patients who underwent curative gastrectomy for gastric cancer between June 2010 and March 2014 at Kanagawa Cancer Center. All the patients received perioperative care for enhanced recovery after surgery. The percentage of lean body mass loss was calculated by the percentile of lean body mass 1 month after surgery to preoperative lean body mass. Severe lean body mass loss was defined as a lean body mass loss greater than 5 %. Risk factors for severe lean body mass loss were determined by both uni- and multivariate logistic regression analyses. This study examined 485 patients. The median loss of lean body mass was 4.7 %. A lean body mass loss of 5 % or more occurred for 225 patients (46.4 %). Both uni- and multivariate logistic analyses demonstrated that the significant independent risk factors for severe lean body mass loss were surgical complications with infection or fasting (odds ratio [OR] 3.576; p = 0.001), total gastrectomy (OR 2.522; p = 0.0001), and gender (OR 1.928; p = 0.001). Nutritional intervention or control of surgical invasion should be tested in future clinical trials for gastric cancer patients with these risk factors to maintain lean body mass after gastrectomy.

Lean management systems: creating a culture of continuous quality improvement.

PubMed

Clark, David M; Silvester, Kate; Knowles, Simon

2013-08-01

This is the first in a series of articles describing the application of Lean management systems to Laboratory Medicine. Lean is the term used to describe a principle-based continuous quality improvement (CQI) management system based on the Toyota production system (TPS) that has been evolving for over 70 years. Its origins go back much further and are heavily influenced by the work of W Edwards Deming and the scientific method that forms the basis of most quality management systems. Lean has two fundamental elements--a systematic approach to process improvement by removing waste in order to maximise value for the end-user of the service and a commitment to respect, challenge and develop the people who work within the service to create a culture of continuous improvement. Lean principles have been applied to a growing number of Healthcare systems throughout the world to improve the quality and cost-effectiveness of services for patients and a number of laboratories from all the pathology disciplines have used Lean to shorten turnaround times, improve quality (reduce errors) and improve productivity. Increasingly, models used to plan and implement large scale change in healthcare systems, including the National Health Service (NHS) change model, have evidence-based improvement methodologies (such as Lean CQI) as a core component. Consequently, a working knowledge of improvement methodology will be a core skill for Pathologists involved in leadership and management.

Role of protein and amino acids in promoting lean mass accretion with resistance exercise and attenuating lean mass loss during energy deficit in humans.

PubMed

Churchward-Venne, Tyler A; Murphy, Caoileann H; Longland, Thomas M; Phillips, Stuart M

2013-08-01

Amino acids are major nutrient regulators of muscle protein turnover. After protein ingestion, hyperaminoacidemia stimulates increased rates of skeletal muscle protein synthesis, suppresses muscle protein breakdown, and promotes net muscle protein accretion for several hours. These acute observations form the basis for strategized protein intake to promote lean mass accretion, or prevent lean mass loss over the long term. However, factors such as protein dose, protein source, and timing of intake are important in mediating the anabolic effects of amino acids on skeletal muscle and must be considered within the context of evaluating the reported efficacy of long-term studies investigating protein supplementation as part of a dietary strategy to promote lean mass accretion and/or prevent lean mass loss. Current research suggests that dietary protein supplementation can augment resistance exercise-mediated gains in skeletal muscle mass and strength and can preserve skeletal muscle mass during periods of diet-induced energy restriction. Perhaps less appreciated, protein supplementation can augment resistance training-mediated gains in skeletal muscle mass even in individuals habitually consuming 'adequate' (i.e., >0.8 g kg⁻¹ day⁻¹) protein. Additionally, overfeeding energy with moderate to high-protein intake (15-25 % protein or 1.8-3.0 g kg⁻¹ day⁻¹) is associated with lean, but not fat mass accretion, when compared to overfeeding energy with low protein intake (5 % protein or ~0.68 g kg⁻¹ day⁻¹). Amino acids represent primary nutrient regulators of skeletal muscle anabolism, capable of enhancing lean mass accretion with resistance exercise and attenuating the loss of lean mass during periods of energy deficit, although factors such as protein dose, protein source, and timing of intake are likely important in mediating these effects.

An economic analysis of a system wide Lean approach: cost estimations for the implementation of Lean in the Saskatchewan healthcare system for 2012-2014.

PubMed

Sari, Nazmi; Rotter, Thomas; Goodridge, Donna; Harrison, Liz; Kinsman, Leigh

2017-08-03

The costs of investing in health care reform initiatives to improve quality and safety have been underreported and are often underestimated. This paper reports direct and indirect cost estimates for the initial phase of the province-wide implementation of Lean activities in Saskatchewan, Canada. In order to obtain detailed information about each type of Lean event, as well as the total number of corresponding Lean events, we used the Provincial Kaizen Promotion Office (PKPO) Kaizen database. While the indirect cost of Lean implementation has been estimated using the corresponding wage rate for the event participants, the direct cost has been estimated using the fees paid to the consultant and other relevant expenses. The total cost for implementation of Lean over two years (2012-2014), including consultants and new hires, ranged from $44 million CAD to $49.6 million CAD, depending upon the assumptions used. Consultant costs accounted for close to 50% of the total. The estimated cost of Lean events alone ranged from $16 million CAD to $19.5 million CAD, with Rapid Process Improvement Workshops requiring the highest input of resources. Recognizing the substantial financial and human investments required to undertake reforms designed to improve quality and contain cost, policy makers must carefully consider whether and how these efforts result in the desired transformations. Evaluation of the outcomes of these investments must be part of the accountability framework, even prior to implementation.

Activity Behaviours in Lean and Morbidly Obese Pregnant Women.

PubMed

Fazzi, Caterina; Mohd-Shukri, Nor; Denison, Fiona C; Saunders, David H; Norman, Jane E; Reynolds, Rebecca M

2018-05-17

Interventions to increase physical activity in pregnancy are challenging for morbidly obese women. Targeting sedentary behaviours may be a suitable alternative to increase energy expenditure. We aimed to determine total energy expenditure, and energy expended in sedentary activities in morbidly obese and lean pregnant women. We administered the Pregnancy Physical Activity Questionnaire PPAQ (non-objective) and the Actical accelerometer (objective) to morbidly obese (BMI≥40kg/m²) and lean (BMI≤25Kg/M²) pregnant women recruited in early (<24 weeks), and late (≥24 weeks) gestation. Data are mean (SD). Morbidly obese pregnant women reported expending significantly more energy per day in early (n=140 vs 109; 3198.4 (1847.1) vs 1972.3 (10284.8) Kcal/day, p<0.0001) and late (n=104 vs 64; 3078.2 (1356.5) vs 1947.5 (652.0) Kcal/day, p<0.0001) pregnancy, and expended significantly more energy in sedentary activities, in early (816.1 (423.5) vs 540.1 (244.9) Kcal/day, p<0.0001) and late (881.6 (455.4) vs 581.1 (248.5) Kcal/day, p<0.0001) pregnancy, than lean pregnant women. No differences were observed in the proportion of energy expended sedentary between lean and morbidly obese pregnant women. The greater total energy expenditure in morbidly obese pregnant women was corroborated by Actical accelerometer in early (n=14 per group, obese 1167.7 (313.6) Kcal; lean 781.1 (210.1) Kcal, p<0.05), and in late (n=14 per group, obese 1223.6 (351.5) Kcal; lean 893.7 (175.9) Kcal, p<0.05) pregnancy. In conclusion, non-objective and objective measures showed morbidly obese pregnant women expended more energy per day than lean pregnant. Further studies are needed to determine whether sedentary behaviours are a suitable target for intervention in morbidly obese pregnancy. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Packages of participation: Swedish employees' experience of Lean depends on how they are involved.

PubMed

Brännmark, Mikael; Holden, Richard J

2013-01-01

Lean Production is a dominant approach in Swedish and global manufacturing and service industries. Studies of Lean's employee effects are few and contradictory. Employee effects from Lean are likely not uniform. This paper investigates the effect of employees' participation on their experiences of Lean. This study investigated how different packages of employee participation in Lean affected manufacturing workers' experiences of Lean. During 2008-2011, qualitative and quantitative data were collected from Swedish manufacturing companies participating in the national Swedish Lean Production program Produktionslyftet. Data from 129 surveys (28 companies), 39 semi-structured interviews, and 30 reports were analyzed. In the main analysis, comparisons were made of the survey-reported Lean experiences of employees in three groups: temporary group employees (N = 36), who participated in Lean mostly through intermittent projects; continuous group employees (N = 69), who participated through standing improvement groups; and combined group employees (N = 24), who participated in both ways. Continuous group employees had the most positive experience of Lean, followed by the combined group. Temporary group employees had the least positive experiences, being less likely than their counterparts to report that Lean improved teamwork, occupational safety, and change-related learning, decision making, and authority. These findings support the importance of continuous, structured opportunities for participation but raise the possibility that more participation may result in greater workload and role overload, mitigating some benefits of employee involvement. Consequently, companies should consider involving employees in change efforts but should attend to the specific design of participation activities.

Does Lean healthcare improve patient satisfaction? A mixed-method investigation into primary care.

PubMed

Poksinska, Bozena Bonnie; Fialkowska-Filipek, Malgorzata; Engström, Jon

2017-02-01

Lean healthcare is claimed to contribute to improved patient satisfaction, but there is limited evidence to support this notion. This study investigates how primary-care centres working with Lean define and improve value from the patient's perspective, and how the application of Lean healthcare influences patient satisfaction. This paper contains two qualitative case studies and a quantitative study based on results from the Swedish National Patient Survey. Through the case studies, we investigated how primary-care organisations realised the principle of defining and improving value from the patient's perspective. In the quantitative study, we compared results from the patient satisfaction survey for 23 primary-care centres working with Lean with a control group of 23 care centres not working with Lean. We also analysed changes in patient satisfaction over time. Our case studies reveal that Lean healthcare implementations primarily target efficiency and little attention is paid to the patient's perspective. The quantitative study shows no significantly better results in patient satisfaction for primary-care centres working with Lean healthcare compared with those not working with Lean. Further, care centres working with Lean show no significant improvements in patient satisfaction over time. Lean healthcare implementations seem to have a limited impact on improving patient satisfaction. Care providers need to pay more attention to integrating the patient's perspective in the application of Lean healthcare. Value needs to be defined and value streams need to be improved based on both the knowledge and clinical expertise of care providers, and the preferences and needs of patients. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

TQM and lean strategy deployment in Italian hospitals.

PubMed

Chiarini, Andrea; Baccarani, Claudio

2016-10-03

Purpose This paper aims to contribute to the debate concerning total quality management (TQM)-Lean strategy in public healthcare by analyzing the deployment path for implementation, the possible benefits that can be achieved and the encountered pitfalls. Design/methodology/approach Three case studies are drawn from three large Italian hospitals with more than 500 beds each and structured with many departments. The hospitals are located in Tuscany, Italy. These three hospitals have embraced TQM and Lean, starting from strategic objectives and their deployment. At the same time, they have also implemented many TQM-Lean tools. The case studies are based on interviews held with four managers in each of these three public hospitals. Findings Results from the interviews show that there is a specific deployment path for TQM-Lean implementation. The hospitals have also achieved benefits linked to patient satisfaction and improved organizational performances. Problems related to organizational and cultural issues, such as senior managers' commitment, staff management, manufacturing culture and tools adaptation, could affect the benefits. Research limitations/implications The research has been carried out in just three Italian public hospitals. Hence, similar investigations could be managed in other countries. Researchers could also use a larger sample and investigate these issues by means of quantitative inquiry. Practical implications Practitioners could try to apply the deployment path revealed by these case studies in other public and private hospitals. Originality/value The results of this research show that there is a specific, new deployment path for implementing TQM-Lean strategy in some public hospitals.

Estimation of lipids and lean mass of migrating sandpipers

USGS Publications Warehouse

Skagen, Susan K.; Knopf, Fritz L.; Cade, Brian S.

1993-01-01

Estimation of lean mass and lipid levels in birds involves the derivation of predictive equations that relate morphological measurements and, more recently, total body electrical conductivity (TOBEC) indices to known lean and lipid masses. Using cross-validation techniques, we evaluated the ability of several published and new predictive equations to estimate lean and lipid mass of Semipalmated Sandpipers (Calidris pusilla) and White-rumped Sandpipers (C. fuscicollis). We also tested ideas of Morton et al. (1991), who stated that current statistical approaches to TOBEC methodology misrepresent precision in estimating body fat. Three published interspecific equations using TOBEC indices predicted lean and lipid masses of our sample of birds with average errors of 8-28% and 53-155%, respectively. A new two-species equation relating lean mass and TOBEC indices revealed average errors of 4.6% and 23.2% in predicting lean and lipid mass, respectively. New intraspecific equations that estimate lipid mass directly from body mass, morphological measurements, and TOBEC indices yielded about a 13% error in lipid estimates. Body mass and morphological measurements explained a substantial portion of the variance (about 90%) in fat mass of both species. Addition of TOBEC indices improved the predictive model more for the smaller than for the larger sandpiper. TOBEC indices explained an additional 7.8% and 2.6% of the variance in fat mass and reduced the minimum breadth of prediction intervals by 0.95 g (32%) and 0.39 g (13%) for Semipalmated and White-rumped Sandpipers, respectively. The breadth of prediction intervals for models used to predict fat levels of individual birds must be considered when interpreting the resultant lipid estimates.

Lean health care: what can hospitals learn from a world-class automaker?

PubMed

Kim, Christopher S; Spahlinger, David A; Kin, Jeanne M; Billi, John E

2006-05-01

With health care costs continuing to rise, a variety of process improvement methodologies have been proposed to address the reported inefficiencies in health care delivery. Lean production is one such method. The management philosophy and tools of lean production come from the manufacturing industry, where they were pioneered by Toyota Motor Corporation, which is viewed as the leader in utilizing these performance improvement methods. Lean has already enjoyed tremendous success in improving quality and efficiency in both the manufacturing and the service sector industries. Health care systems have just begun to utilize lean methods, with reports of improvements just beginning to appear in the literature. We describe some of the basic philosophy and principles of lean production methods and how these concepts can be applied in the health care environment. We describe some of the early success stories and ongoing endeavors of lean production in various health care organizations. We believe the hospital is an ideal setting for use of the lean production method, which could significantly affect how health care is delivered to patients. We conclude by discussing some of the potential challenges in introducing and implementing lean production methods in the health care environment. Lean production is a novel approach to delivering high-quality and efficient care to patients, and we believe that the health care sector can anticipate the same high level of success that the manufacturing and service industries have achieved using this approach. Hospitalists are primed to take action in delivering care of greater quality with more efficiency by applying these new principles in the hospital setting. (c) 2006 Society of Hospital Medicine.

Prevalence of Suspected Nonalcoholic Fatty Liver Disease In Lean Adolescents In The United States.

PubMed

Selvakumar, Praveen Kumar Conjeevaram; Kabbany, Mohammad Nasser; Lopez, Rocio; Rayas, Maria S; Lynch, Jane L; Alkhouri, Naim

2018-03-21

Nonalcoholic fatty liver disease (NAFLD) can develop in lean subjects referred to as lean NAFLD. We aim to evaluate the prevalence and risk factors of NAFLD in lean adolescents in the United States (US). Cross sectional data from 1482 lean subjects (body mass index < 85 percentile) aged between 12 and 18 years, who were enrolled in the National Health and Examination Survey during the 2005-2014 cycles were included. We defined suspected NAFLD as alanine aminotransferase > 25.8 U/L for boys and > 22.1 U/L for girls; hypertriglyceridemia as triglycerides ≥ 150 mg/dL; low HDL as HDL < 40 mg/dL and insulin resistance (IR) as homeostatic model assessment of IR ≥ 3. The mean weighted prevalence of suspected NAFLD among lean adolescents during 2005-2014 cycles was 8% (95% CI: 6.2, 9.9). Lean subjects with suspected NAFLD were significantly older compared to lean non-NAFLD subjects (15.5 vs. 15 years, p-value < 0.05). Low HDL (15.5% vs. 6.8%; p-value 0.016) and hypertriglyceridemia (10% vs. 3.9%; p-value 0.028) were also found to be more common among lean NAFLD subjects compared to their non-NAFLD counterparts. Presence of IR increased the risk of having suspected NAFLD by 4-fold among lean adolescents. Non-Hispanic black lean adolescents were less likely to have suspected NAFLD compared to non-Hispanic white lean adolescents. The estimated prevalence of suspected NAFLD among lean adolescents in the US was found to be 8% with evidence of metabolic derangements such as low HDL, hypertriglyceridemia and IR.

A Review and Perspective on Lean in Higher Education

ERIC Educational Resources Information Center

Balzer, William K.; Francis, David E.; Krehbiel, Timothy C.; Shea, Nicholas

2016-01-01

Purpose: The purpose of this paper is to synthesize the accumulated body of research on Lean in higher education, draw conclusions to help guide successful Lean implementations and propose future research directions to establish a rich base of knowledge that informs both practice and research. Design/methodology/approach This literature review…

Lean Mixture Engines Testing and Evaluation Program : Volume 3. Appendices.

DOT National Transportation Integrated Search

1975-01-01

This report is aimed at defining analytically and demonstrating experimentally the potential of the 'lean-burn concept.' Fuel consumption and emissions data are obtained on the engine dynamometer for the baseline engine, and two lean-burn configurati...

Lost in translation: a case-study of the travel of lean thinking in a hospital.

PubMed

Andersen, Hege; Røvik, Kjell Arne

2015-09-21

Lean thinking as a quality improvement approach is introduced in hospitals worldwide, although evidence for its impact is scarce. Lean initiatives are social, complex and context-dependent. This calls for a shift from cause-effect to conditional attributions to understand how lean works. In this study, we bring attention to the transformative power of local translation, which creates different versions of lean in different contexts, and thereby affect the evidence for lean as well as the success of lean initiatives within and among hospitals. We explored the travel of lean within a hospital in Norway by identifying local actors' perceptions of lean through their images of enablers for successful interventions. These attributions describe the characteristics of lean in use, i.e. the prevailing version of lean. Local actors' perceptions of enablers for lean interventions were collected through focus group interviews with three groups of stakeholders: managers, internal consultants and staff. A questionnaire was used to reveal the enablers relative importance. The enablers known from the literature were retrieved at the case hospital. The only exception was that external expert change agents were not believed to promote lean. In addition, the stakeholders added a number of new and supplementary enablers. Two-thirds of the most important enablers for success were novel, local ones. Among these were a problem, not method focus, a bottom-up approach, the need of internal consultants, credibility, realism and patience. The local actors told different stories about local enablers and had different images of lean depending on their hierarchical level. By comparing and analyzing the findings from the literature review, the focus groups and the survey, we deduced that the travel of lean within the hospital was affected by three principles of translation: the practical, the pragmatic, and the sceptical. Further, three logics of translation were in play: translation as a funnel

Lean methodology for performance improvement in the trauma discharge process.

PubMed

O'Mara, Michael Shaymus; Ramaniuk, Aliaksandr; Graymire, Vickie; Rozzell, Monica; Martin, Stacey

2014-07-01

High-volume, complex services such as trauma and acute care surgery are at risk for inefficiency. Lean process improvement can reduce health care waste. Lean allows a structured look at processes not easily amenable to analysis. We applied lean methodology to the current state of communication and discharge planning on an urban trauma service, citing areas for improvement. A lean process mapping event was held. The process map was used to identify areas for immediate analysis and intervention-defining metrics for the stakeholders. After intervention, new performance was assessed by direct data evaluation. The process was completed with an analysis of effect and plans made for addressing future focus areas. The primary area of concern identified was interservice communication. Changes centering on a standardized morning report structure reduced the number of consult questions unanswered from 67% to 34% (p = 0.0021). Physical therapy rework was reduced from 35% to 19% (p = 0.016). Patients admitted to units not designated to the trauma service had 1.6 times longer stays (p < 0.0001). The lean process lasted 8 months, and three areas for new improvement were identified: (1) the off-unit patients; (2) patients with length of stay more than 15 days contribute disproportionately to length of stay; and (3) miscommunication exists around patient education at discharge. Lean process improvement is a viable means of health care analysis. When applied to a trauma service with 4,000 admissions annually, lean identifies areas ripe for improvement. Our inefficiencies surrounded communication and patient localization. Strategies arising from the input of all stakeholders led to real solutions for communication through a face-to-face morning report and identified areas for ongoing improvement. This focuses resource use and identifies areas for improvement of throughput in care delivery.

Leptin production during early starvation in lean and obese women.

PubMed

Klein, S; Horowitz, J F; Landt, M; Goodrick, S J; Mohamed-Ali, V; Coppack, S W

2000-02-01

We evaluated abdominal adipose tissue leptin production during short-term fasting in nine lean [body mass index (BMI) 21 +/- 1 kg/m(2)] and nine upper body obese (BMI 36 +/- 1 kg/m(2)) women. Leptin kinetics were determined by arteriovenous balance across abdominal subcutaneous adipose tissue at 14 and 22 h of fasting. At 14 h of fasting, net leptin release from abdominal adipose tissue in obese subjects (10.9 +/- 1.9 ng x 100 g tissue x (-1) x min(-1)) was not significantly greater than the values observed in the lean group (7.6 +/- 2.1 ng x 100 g(-1) x min(-1)). Estimated whole body leptin production was approximately fivefold greater in obese (6.97 +/- 1.18 microg/min) than lean subjects (1.25 +/- 0.28 microg/min) (P < 0.005). At 22 h of fasting, leptin production rates decreased in both lean and obese groups (to 3.10 +/- 1.31 and 10.5 +/- 2.3 ng x 100 g adipose tissue(-1) x min(-1), respectively). However, the relative declines in both arterial leptin concentration and local leptin production in obese women (arterial concentration 13.8 +/- 4.4%, local production 10.0 +/- 12.3%) were less (P < 0.05 for both) than the relative decline in lean women (arterial concentration 39.0 +/- 5.5%, local production 56.9 +/- 13.0%). This study demonstrates that decreased leptin production accounts for the decline in plasma leptin concentration observed after fasting. However, compared with lean women, the fasting-induced decline in leptin production is blunted in women with upper body obesity. Differences in leptin production during fasting may be responsible for differences in the neuroendocrine response to fasting previously observed in lean and obese women.

Validation of a skinfold based index for tracking proportional changes in lean mass

PubMed Central

Slater, G J; Duthie, G M; Pyne, D B; Hopkins, W G

2006-01-01

Background The lean mass index (LMI) is a new empirical measure that tracks within‐subject proportional changes in body mass adjusted for changes in skinfold thickness. Objective To compare the ability of the LMI and other skinfold derived measures of lean mass to monitor changes in lean mass. Methods 20 elite rugby union players undertook full anthropometric profiles on two occasions 10 weeks apart to calculate the LMI and five skinfold based measures of lean mass. Hydrodensitometry, deuterium dilution, and dual energy x ray absorptiometry provided a criterion choice, four compartment (4C) measure of lean mass for validation purposes. Regression based measures of validity, derived for within‐subject proportional changes through log transformation, included correlation coefficients and standard errors of the estimate. Results The correlation between change scores for the LMI and 4C lean mass was moderate (0.37, 90% confidence interval −0.01 to 0.66) and similar to the correlations for the other practical measures of lean mass (range 0.26 to 0.42). Standard errors of the estimate for the practical measures were in the range of 2.8–2.9%. The LMI correctly identified the direction of change in 4C lean mass for 14 of the 20 athletes, compared with 11 to 13 for the other practical measures of lean mass. Conclusions The LMI is probably as good as other skinfold based measures for tracking lean mass and is theoretically more appropriate. Given the impracticality of the 4C criterion measure for routine field use, the LMI may offer a convenient alternative for monitoring physique changes, provided its utility is established under various conditions. PMID:16505075

Applying lean management principles to the creation of a postpartum hemorrhage care bundle.

PubMed

Faulkner, Beth

2013-10-01

A lean management process is a set of interventions, each of which creates value for the customer. Lean management is not a new concept, but is relatively new to health care. Postpartum hemorrhage (PPH) is the most common cause of maternal death worldwide in both developing and developed countries. We applied lean management principles as an innovative approach to improving outcomes in patients with PPH. Initial results using principles of lean management indicated significant improvements in response time and family-centered care. When applied rigorously and throughout the organization, lean principles can have a dramatic effect on productivity, cost and quality. © 2013 AWHONN.

Ambulatory Blood Pressure Monitoring in Lean, Obese and Diabetic Children and Adolescents

PubMed Central

Shikha, Deep; Singla, Montish; Walia, Rachna; Potter, Natia; Umpaichitra, Vatcharapan; Mercado, Arlene; Winer, Nathaniel

2015-01-01

Aim To determine if children and adolescents who have obesity (Ob) or type 2 diabetes (T2DM) of relatively short duration have impaired cardiovascular function compared with lean subjects using 24-hour ambulatory blood pressure as a surrogate measure of evaluation. Methods We enrolled 100 African-Caribbean subjects (45 males/55 females), mean ages 14.4-15.2 years (range 11.8-18.5 years) and Tanner stage 4.2-4.8. Mean BMI for the Ob (n = 40), T2DM (n = 39) and lean (n = 21) groups were 40.3, 34.2 and 20.8, respectively (p < 0.01, Ob and T2DM vs. lean). Mean hemoglobin A1c in lean and Ob was 5.4 and 5.5% compared to 8.8% in T2DM (p < 0.001, T2DM vs. lean and Ob). Ambulatory blood pressure was recorded every 20 min over 24 h using Spacelabs 70207. Results Mean 24-hour, daytime and nighttime systolic blood pressure was significantly higher in Ob and T2DM compared with lean subjects (mean 24-hour 117 and 120 vs. 109 mm Hg; daytime 121 and 123 vs. 113 mm Hg; and nighttime 109 and 115 vs. 101 mm Hg; p < 0.01 for all time periods). The nocturnal systolic dip in Ob and T2DM did not differ from that of lean, whereas nocturnal diastolic dip decreased significantly in Ob and T2DM compared to lean (11.5 and 10.4 vs. 20.6 mm Hg; p < 0.01). Mean pulse pressure was significantly increased in the Ob and T2DM groups compared to lean subjects (51 and 54 vs. 45 mm Hg; p < 0.01). Conclusion Adolescent Ob and T2DM groups share adverse risk factors, which may be harbingers of adult cardiovascular events. PMID:26195970

Building Lean Supply Chain and Manufacturing Skills through an Interactive Case Study

ERIC Educational Resources Information Center

Ozelkan, Ertunga C.; Teng, S. Gary; Johnson, Thomas; Benson, Tom; Nestvogel, Dean

2007-01-01

With the ongoing global pressure to cut costs and focus on quality, many companies have been implementing "lean manufacturing" concepts to survive in the competitive marketplace. Thus it is imperative that engineering and business graduates are equipped with the lean principles, and are ready to take ownership of lean initiatives as they enter the…

The impact of Lean bundles on hospital performance: does size matter?

PubMed

Al-Hyari, Khalil; Abu Hammour, Sewar; Abu Zaid, Mohammad Khair Saleem; Haffar, Mohamed

2016-10-10

Purpose The purpose of this paper is to study the effect of the implementation of Lean bundles on hospital performance in private hospitals in Jordan and evaluate how much the size of organization can affect the relationship between Lean bundles implementation and hospital performance. Design/methodology/approach The research is considered as quantitative method (descriptive and hypothesis testing). Three statistical techniques were adopted to analyse the data. Structural equation modeling techniques and multi-group analysis were used to examine the research's hypothesis, and to perform the required statistical analysis of the data from the survey. Reliability analysis and confirmatory factor analysis were used to test the construct validity, reliability and measurement loadings that were performed. Findings Lean bundles have been identified as an effective approach that can dramatically improve the organizational performance of private hospitals in Jordan. Main Lean bundles - just in time, human resource management, and total quality management are applicable to large, small and medium hospitals without significant differences in advantages that depend on size. Originality/value According to the researchers' best knowledge, this is the first research that studies the impact of Lean bundles implementation in healthcare sector in Jordan. This research also makes a significant contribution for decision makers in healthcare to increase their awareness of Lean bundles.

Dudrick Research Symposium 2015-Lean Tissue and Protein in Health and Disease.

PubMed

Earthman, Carrie P; Wolfe, Robert R; Heymsfield, Steven B

2017-02-01

The 2015 Dudrick Research Symposium "Lean Tissue and Protein in Health and Disease: Key Targets and Assessment Strategies" was held on February 16, 2015, at Clinical Nutrition Week in Long Beach, California. The Dudrick Symposium honors the many pivotal and innovative contributions to the development and advancement of parenteral nutrition made by Dr Stanley J. Dudrick, physician scientist, academic leader, and a founding member of the American Society for Parenteral and Enteral Nutrition. As the 2014 recipient of the Dudrick award, Dr Carrie Earthman chaired the symposium and was the first of 3 speakers, followed by Dr Robert Wolfe and Dr Steven Heymsfield. The symposium addressed the importance of lean tissue to health and response to disease and injury, as well as the many opportunities and challenges in its assessment at the bedside. Lean tissue assessment is beneficial to clinical care in chronic and acute care clinical settings, given the strong relationship between lean tissue and outcomes, including functional status. Currently available bioimpedance techniques, including the use of bioimpedance parameters, for lean tissue and nutrition status assessment were presented. The connection between protein requirements and lean tissue was discussed, highlighting the maintenance of lean tissue as one of the most important primary end points by which protein requirements can be estimated. The various tracer techniques to establish protein requirements were presented, emphasizing the importance of practical considerations in research protocols aimed to establish protein requirements. Ultrasound and other new and emerging technologies that may be used for lean tissue assessment were discussed, and areas for future research were highlighted.

Biomechanical mechanism of lateral trunk lean gait for knee osteoarthritis patients.

PubMed

Tokuda, Kazuki; Anan, Masaya; Takahashi, Makoto; Sawada, Tomonori; Tanimoto, Kenji; Kito, Nobuhiro; Shinkoda, Koichi

2018-01-03

The biomechanical mechanism of lateral trunk lean gait employed to reduce external knee adduction moment (KAM) for knee osteoarthritis (OA) patients is not well known. This mechanism may relate to the center of mass (COM) motion. Moreover, lateral trunk lean gait may affect motor control of the COM displacement. Uncontrolled manifold (UCM) analysis is an evaluation index used to understand motor control and variability of the motor task. Here we aimed to clarify the biomechanical mechanism to reduce KAM during lateral trunk lean gait and how motor variability controls the COM displacement. Twenty knee OA patients walked under two conditions: normal and lateral trunk lean gait conditions. UCM analysis was performed with respect to the COM displacement in the frontal plane. We also determined how the variability is structured with regards to the COM displacement as a performance variable. The peak KAM under lateral trunk lean gait was lower than that under normal gait. The reduced peak KAM observed was accompanied by medially shifted knee joint center, shortened distance of the center of pressure to knee joint center, and shortened distance of the knee-ground reaction force lever arm during the stance phase. Knee OA patients with lateral trunk lean gait could maintain kinematic synergy by utilizing greater segmental configuration variance to the performance variable. However, the COM displacement variability of lateral trunk lean gait was larger than that of normal gait. Our findings may provide clinical insights to effectively evaluate and prescribe gait modification training for knee OA patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Lean Six Sigma journey in radiology.

PubMed

Bucci, Ronald V; Musitano, Anne

2011-01-01

The department of radiology at Akron Children's Hospital embarked on a Lean Six Sigma mission as part of a hospital wide initiative to show increased customer satisfaction, reduce employee dissatisfaction and frustration, and decrease costs. Three processes that were addressed were reducing the MRI scheduling back-log, reconciling discrepancies in billing radiology procedures, and implementing a daily management system. Keys to success is that managers provide opportunities to openly communicate between department sections to break down barriers. Executive leaders must be engaged in Lean Six Sigma for the company to be successful.

Filter-based control of particulate matter from a lean gasoline direct injection engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parks, II, James E; Lewis Sr, Samuel Arthur; DeBusk, Melanie Moses

New regulations requiring increases in vehicle fuel economy are challenging automotive manufacturers to identify fuel-efficient engines for future vehicles. Lean gasoline direct injection (GDI) engines offer significant increases in fuel efficiency over the more common stoichiometric GDI engines already in the marketplace. However, particulate matter (PM) emissions from lean GDI engines, particularly during stratified combustion modes, are problematic for lean GDI technology to meet U.S. Environmental Protection Agency Tier 3 and other future emission regulations. As such, the control of lean GDI PM with wall-flow filters, referred to as gasoline particulate filter (GPF) technology, is of interest. Since lean GDImore » PM chemistry and morphology differ from diesel PM (where more filtration experience exists), the functionality of GPFs needs to be studied to determine the operating conditions suitable for efficient PM removal. In addition, lean GDI engine exhaust temperatures are generally higher than diesel engines which results in more continuous regeneration of the GPF and less presence of the soot cake layer common to diesel particulate filters. Since the soot layer improves filtration efficiency, this distinction is important to consider. Research on the emission control of PM from a lean GDI engine with a GPF was conducted on an engine dynamometer. PM, after dilution, was characterized with membrane filters, organic vs. elemental carbon characterization, and size distribution techniques at various steady state engine speed and load points. The engine was operated in three primary combustion modes: stoichiometric, lean homogeneous, and lean stratified. In addition, rich combustion was utilized to simulate PM from engine operation during active regeneration of lean NOx control technologies. High (>95%) PM filtration efficiencies were observed over a wide range of conditions; however, some PM was observed to slip through the GPF at high speed and load

Drive for leanness and health-related behavior within a social/cultural perspective.

PubMed

Tod, David; Edwards, Christian; Hall, Gareth

2013-09-01

We examined relationships between drive for leanness and perceived media pressure to change appearance, internalization of an ideal physique, exercise frequency, and dieting. Men and women (N=353) completed the Drive for Leanness Scale, the Sociocultural Attitudes Toward Appearance Questionnaire-3, the Eating Attitudes Test-26, and a demographic inventory. Drive for leanness was significantly correlated with athletic internalization (.52), pressure to attain an ideal physique (.25), exercise frequency (.36), and dieting (.25). Structural equation modeling revealed a good fitting model (χ(2)=2.85, p<.241; CFI=.99; NNFI=.98; RMSEA=.04; SRMR=.02) with internalization predicting drive for leanness, which in turn predicted dieting and exercise. Results reveal social/cultural theory helps enhance the understanding of the drive for leanness and its relationship with health-related behavior. Copyright © 2013 Elsevier Ltd. All rights reserved.

Serum adipokine profile and fatty acid composition of adipose tissues are affected by conjugated linoleic acid and saturated fat diets in obese Zucker rats.

PubMed

Martins, Susana V; Lopes, Paula A; Alfaia, Cristina M; Rodrigues, Pedro O; Alves, Susana P; Pinto, Rui M A; Castro, Matilde F; Bessa, Rui J B; Prates, José A M

2010-03-01

Conjugated linoleic acid (CLA) has been reported as having body fat lowering properties and the ability to modulate the inflammatory system in several models. In the present study, the effects of CLA added to saturated fat diets, from vegetable and animal origins, on the serum adipokine profile of obese Zucker rats were assessed. In addition, the fatty acid composition of epididymal and retroperitoneal adipose tissues was determined and a principal component analysis (PCA) was used to assess possible relationships between fatty acids and serum metabolites. Atherogenic diets (2 % cholesterol) were formulated with palm oil and ovine fat and supplemented or not with 1 % of a mixture (1:1) of cis-9, trans-11 and trans-10, cis-12-CLA isomers. CLA-fed animals exhibited lower daily feed intake, final body and liver weights, and hepatic lipids content. Total and LDL-cholesterol levels were increased in CLA-supplemented groups. CLA also promoted higher adiponectin and lower plasminogen activator inhibitor-1 (PAI-1) serum concentrations. In contrast to palm oil diets, ovine fat increased insulin resistance and serum levels of leptin, TNF-alpha and IL-1beta. Epididymal and retroperitoneal adipose tissues had similar deposition of individual fatty acids. The PCA analysis showed that the trans-10, cis-12-CLA isomer was highly associated with adiponectin and PAI-1 levels. Summing up, CLA added to vegetable saturated enriched diets, relative to those from animal origin, seems to improve the serum profile of adipokines and inflammatory markers in obese Zucker rats due to a more favourable fatty acid composition.

Estimation of lean and fat composition of pork ham using image processing measurements

NASA Astrophysics Data System (ADS)

Jia, Jiancheng; Schinckel, Allan P.; Forrest, John C.

1995-01-01

This paper presents a method of estimating the lean and fat composition in pork ham from cross-sectional area measurements using image processing technology. The relationship between the quantity of ham lean and fat mass with the ham lean and fat areas was studied. The prediction equations for pork ham composition based on the ham cross-sectional area measurements were developed. The results show that ham lean weight was related to the ham lean area (r equals .75, P < .0001) while ham fat weight was related tot the ham fat area (r equals .79, P equals .0001). Ham lean weight was highly related to the product of ham total weight times percentage ham lean area (r equals .96, P < .0001). Ham fat weight was highly related to the product of ham total weight times percentage ham fat area (r equals .88, P < .0001). The best combination of independent variables for estimating ham lean weight was trimmed wholesale ham weight and percentage ham fat area with a coefficient of determination of 92%. The best combination of independent variables for estimating ham fat weight was trimmed wholesale ham weight and percentage ham fat area with a coefficient of determination of 78%. Prediction equations with either two or three independent variables did not significantly increase the accuracy of prediction. The results of this study indicate that the weight of ham lean and fat could be predicted from ham cross-sectional area measurements using image analysis in combination with wholesale ham weight.

Giddings Austin chalk enters deep lean-gas phase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moritis, G.

1995-12-25

Deep lean gas is the latest phase in the growth of the Giddings field Austin chalk play. The first phase involved drilling vertical oil and gas wells. Next came the horizontal well boom in the shallower Austin chalk area, which is still continuing. And now this third phase places horizontal laterals in the Austen chalk at about 14,000--15,000 ft to produce lean gas. The article describes the producing wells and gas gathering.

Comparative study: TQ and Lean Production ownership models in health services

PubMed Central

Eiro, Natalia Yuri; Torres-Junior, Alvair Silveira

2015-01-01

Objective: compare the application of Total Quality (TQ) models used in processes of a health service, cases of lean healthcare and literature from another institution that has also applied this model. Method: this is a qualitative research that was conducted through a descriptive case study. Results: through critical analysis of the institutions studied it was possible to make a comparison between the traditional quality approach checked in one case and the theoretical and practice lean production approach used in another case and the specifications are described below. Conclusion: the research identified that the lean model was better suited for people that work systemically and generate the flow. It also pointed towards some potential challenges in the introduction and implementation of lean methods in health. PMID:26487134

Comparative study of lean practices between Japanese and Malaysia automotive service centres

NASA Astrophysics Data System (ADS)

Ahmad, Md Fauzi; Ting, Neo Yeong; Nor, Nik Hisyamudin Muhd; Wei, Chan Shiau; Hassan, Mohd Fahrul; Hamid, Nor Aziati Abdul

2017-10-01

Nowadays, lean practices are implemented in many manufacturing and services companies. Lean practices are implemented in order to minimize wastes while maximise the overall performances in an organisation. In service sector, lean practices are importance to ensure value added services can be delivered to customers. However, Malaysia automotive companies cannot compete with Japanese automotive companies in terms of their customer satisfaction. The purpose of this study is to compare the lean practice between Japanese and Malaysia automotive service centres. A total of 80 questionnaires out of 100 distributed questionnaires were responded and this represented as 80% of response rate. The Mann-Whitney test result shows that there were four out of five factors of lean practices have significant differences between Japanese and Malaysia automotive service centres, which are TPM, JIT, Kanban, and 5S. VSM has not significant difference between ownerships. In addition, TPM, JIT, Kanban, VSM and 5S were higher practices in Japanese companies against Malaysia companies. Many Malaysia companies are still in the journey of lean practices and they need recommendation guidance to compete with other long-term established companies. Based on the survey result, the significant differences are identified as weak points of Malaysia companies as an opportunity to improve. Moreover, the significance of this study can help researchers and industry players to improve lean practices in automotive service industry.

Lean Management as an Instrument of Sustainable Development of Enterprises

NASA Astrophysics Data System (ADS)

Sikora, Marcin; Kwiatkowski, Maciej; Prosół, Hanna; Nowicka, Daria; Lorenc, Karolina; Pham, Laurena

2016-03-01

The aim of the paper is to present the philosophy of Lean Management as an instrument of improving sustainable management of enterprises. The article presents the origins, characteristics of the broadly understood concept of Lean Management and describes the idea of Sustainable Development (SD). At the same time implications for the application and development of the instruments which operationalize the assumptions of SD at the level of enterprises are discussed. The paper specifies those areas of functioning of contemporary companies in which Lean Management can be implemented and compares them with the features of traditional management in particular subjects.

Packages of participation: Swedish employees’ experience of Lean depends on how they are involved

PubMed Central

Brännmark, Mikael; Holden, Richard J.

2013-01-01

Background Lean Production is a dominant approach in Swedish and global manufacturing and service industries. Studies of Lean’s employee effects are few and contradictory. Purpose Employee effects from Lean are likely not uniform. This paper investigates the effect of employees' participation on their experiences of Lean. Method This study investigated how different packages of employee participation in Lean affected manufacturing workers’ experiences of Lean. During 2008–2011, qualitative and quantitative data were collected from Swedish manufacturing companies participating in the national Swedish Lean Production program Produktionslyftet. Data from 129 surveys (28 companies), 39 semi-structured interviews, and 30 reports were analyzed. In the main analysis, comparisons were made of the survey-reported Lean experiences of employees in three groups: temporary group employees (N = 36), who participated in Lean mostly through intermittent projects; continuous group employees (N = 69), who participated through standing improvement groups; and combined group employees (N = 24), who participated in both ways. Results Continuous group employees had the most positive experience of Lean, followed by the combined group. Temporary group employees had the least positive experiences, being less likely than their counterparts to report that Lean improved teamwork, occupational safety, and change-related learning, decision making, and authority. Conclusions These findings support the importance of continuous, structured opportunities for participation but raise the possibility that more participation may result in greater workload and role overload, mitigating some benefits of employee involvement. Consequently, companies should consider involving employees in change efforts but should attend to the specific design of participation activities. PMID:24665370

Exploring the Development of Competence in Lean Management through Action Learning Groups: A Study of the Introduction of Lean to a Facilities Management Function

ERIC Educational Resources Information Center

Wyton, Paul; Payne, Robin

2014-01-01

The introduction of a Lean approach to management requires the development of understanding and capability. This in turn requires a structured training intervention and other supporting activities. This paper explores, through a case study, the way in which action learning groups (ALGs) supported the development of Lean capabilities in the…

What Is Lean Management in Health Care? Development of an Operational Definition for a Cochrane Systematic Review.

PubMed

Rotter, Thomas; Plishka, Christopher; Lawal, Adegboyega; Harrison, Liz; Sari, Nazmi; Goodridge, Donna; Flynn, Rachel; Chan, James; Fiander, Michelle; Poksinska, Bonnie; Willoughby, Keith; Kinsman, Leigh

2018-01-01

Industrial improvement approaches such as Lean management are increasingly being adopted in health care. Synthesis is necessary to ensure these approaches are evidence based and requires operationalization of concepts to ensure all relevant studies are included. This article outlines the process utilized to develop an operational definition of Lean in health care. The literature search, screening, data extraction, and data synthesis processes followed the recommendations outlined by the Cochrane Collaboration. Development of the operational definition utilized the methods prescribed by Kinsman et al. and Wieland et al. This involved extracting characteristics of Lean, synthesizing similar components to establish an operational definition, applying this definition, and updating the definition to address shortcomings. We identified two defining characteristics of Lean health-care management: (1) Lean philosophy, consisting of Lean principles and continuous improvement, and (2) Lean activities, which include Lean assessment activities and Lean improvement activities. The resulting operational definition requires that an organization or subunit of an organization had integrated Lean philosophy into the organization's mandate, guidelines, or policies and utilized at least one Lean assessment activity or Lean improvement activity. This operational definition of Lean management in health care will act as an objective screening criterion for our systematic review. To our knowledge, this is the first evidence-based operational definition of Lean management in health care.

A healthcare Lean Six Sigma System for postanesthesia care unit workflow improvement.

PubMed

Kuo, Alex Mu-Hsing; Borycki, Elizabeth; Kushniruk, Andre; Lee, Te-Shu

2011-01-01

The aim of this article is to propose a new model called Healthcare Lean Six Sigma System that integrates Lean and Six Sigma methodologies to improve workflow in a postanesthesia care unit. The methodology of the proposed model is fully described. A postanesthesia care unit case study is also used to demonstrate the benefits of using the Healthcare Lean Six Sigma System model by combining Lean and Six Sigma methodologies together. The new model bridges the service gaps between health care providers and patients, balances the requirements of health care managers, and delivers health care services to patients by taking the benefits of the Lean speed and Six Sigma high-quality principles. The full benefits of the new model will be realized when applied at both strategic and operational levels. For further research, we will examine how the proposed model is used in different real-world case studies.

Effect of lean red meat from lamb v. lean white meat from chicken on the serum lipid profile: a randomised, cross-over study in women.

PubMed

Mateo-Gallego, Rocio; Perez-Calahorra, Sofia; Cenarro, Ana; Bea, Ana M; Andres, Eva; Horno, Jaime; Ros, Emilio; Civeira, Fernando

2012-05-01

The main dietary guidelines recommend restricting total and saturated fat intake in the management of high blood cholesterol levels for cardiovascular risk. These recommendations are usually oversimplified by considering that all red meats should be limited and replaced by white meats. However, lean red meat can be as low in fat as white meat. We examined the effects of red meat (lean breed lamb) and lean white meat (chicken) intake on the lipid profile of a group of women with stable life conditions (nuns living in convents). An open-label, randomised, cross-over study was carried out in thirty-six nuns who consumed either lamb or chicken three times per week for 5-week periods with their usual diet. Clinical, dietary and biochemical variables were evaluated at baseline and the end of each diet period. A validated FFQ was used to assess nutrient intake and monitor compliance. The results showed neither between-diet differences in lipid responses nor differences from baseline in total cholesterol, LDL-cholesterol or TAG for any diet period. In conclusion, consumption of lean red meat (lamb) or lean white meat (chicken) as part of the usual diet is associated with a similar lipid response. These two foods can be exchanged in a healthy diet to increase palatability.

Clinical and Metabolic Characterization of Lean Caucasian Subjects With Non-alcoholic Fatty Liver.

PubMed

Feldman, Alexandra; Eder, Sebastian K; Felder, Thomas K; Kedenko, Lyudmyla; Paulweber, Bernhard; Stadlmayr, Andreas; Huber-Schönauer, Ursula; Niederseer, David; Stickel, Felix; Auer, Simon; Haschke-Becher, Elisabeth; Patsch, Wolfgang; Datz, Christian; Aigner, Elmar

2017-01-01

Non-alcoholic fatty liver disease (NAFLD) is closely linked to obesity; however, 5-8% of lean subjects also have evidence of NAFLD. We aimed to investigate clinical, genetic, metabolic and lifestyle characteristics in lean Caucasian subjects with NAFLD. Data from 187 subjects allocated to one of the three groups according to body mass index (BMI) and hepatic steatosis on ultrasound were obtained: lean healthy (BMI≤25 kg/m 2 , no steatosis, N=71), lean NAFLD (BMI≤25 kg/m 2 , steatosis, N=55), obese NAFLD (BMI≥30 kg/m 2 , steatosis; N=61). All subjects received a detailed clinical and laboratory examination including oral glucose tolerance test. The serum metabolome was assessed using the Metabolomics AbsoluteIDQ p180 kit (BIOCRATES Life Sciences). Genotyping for single-nucleotide polymorphisms (SNPs) associated with NAFLD was performed. Lean NAFLD subjects had fasting insulin concentrations similar to lean healthy subjects but had markedly impaired glucose tolerance. Lean NAFLD subjects had a higher rate of the mutant PNPLA3 CG/GG variant compared to lean controls (P=0.007). Serum adiponectin concentrations were decreased in both NAFLD groups compared to controls (P<0.001 for both groups) The metabolomics study revealed a potential role for various lysophosphatidylcholines (lyso-PC C18:0, lyso-PC C17:0) and phosphatidylcholines (PCaa C36:3; false discovery rate (FDR)-corrected P-value<0.001) as well as lysine, tyrosine, and valine (FDR<0.001). Lean subjects with evidence of NAFLD have clinically relevant impaired glucose tolerance, low adiponectin concentrations and a distinct metabolite profile with an increased rate of PNPLA3 risk allele carriage.

Behavior of the lean methane-air flame at zero-gravity

NASA Technical Reports Server (NTRS)

Noe, K. A.; Strehlow, R. A.

1985-01-01

A special rig was designed and constructed to be compatible with the NASA Lewis Research Center Airborne Research Laboratory to allow the study of the effect of gravity on the behavior of lean limit in a standard 50.4 mm (2 in.) internal diameter tube when the mixtures are ignited at the open end and propagate towards the closed end of the tube. The lean limit at zero gravity was found to be 5.10% methane and the flame was found to extenguish in a manner previously observed for downward propagating flames at one g. It was observed that g-jitter could be maintained at less than + or 0.04 g on most zero g trajectories. All of propagating lean limit flames were found to be sporadically cellularly unstable at zero g. There was no observable correlation between the occurrence of g-jitter and the lean limit, average propagation speed of the flame through the tube or the occurrence of cellular instability.

Model Development and Process Analysis for Lean Cellular Design Planning in Aerospace Assembly and Manufacturing

NASA Astrophysics Data System (ADS)

Hilburn, Monty D.

Successful lean manufacturing and cellular manufacturing execution relies upon a foundation of leadership commitment and strategic planning built upon solid data and robust analysis. The problem for this study was to create and employ a simple lean transformation planning model and review process that could be used to identify functional support staff resources required to plan and execute lean manufacturing cells within aerospace assembly and manufacturing sites. The lean planning model was developed using available literature for lean manufacturing kaizen best practices and validated through a Delphi panel of lean experts. The resulting model and a standardized review process were used to assess the state of lean transformation planning at five sites of an international aerospace manufacturing and assembly company. The results of the three day, on-site review were compared with baseline plans collected from each of the five sites to determine if there analyzed, with focus on three critical areas of lean planning: the number and type of manufacturing cells identified, the number, type, and duration of planned lean and continuous kaizen events, and the quantity and type of functional staffing resources planned to support the kaizen schedule. Summarized data of the baseline and on-site reviews was analyzed with descriptive statistics. ANOVAs and paired-t tests at 95% significance level were conducted on the means of data sets to determine if null hypotheses related to cell, kaizen event, and support resources could be rejected. The results of the research found significant differences between lean transformation plans developed by site leadership and plans developed utilizing the structured, on-site review process and lean transformation planning model. The null hypothesis that there was no difference between the means of pre-review and on-site cell counts was rejected, as was the null hypothesis that there was no significant difference in kaizen event plans. These

[Improving a hospital's supply chain through lean management].

PubMed

Aguilar-Escobar, V G; Garrido-Vega, P; Godino-Gallego, N

2013-01-01

Supply management is an area where hospitals have significant opportunities for improvement. The main objective of this paper has been to analyze how the application of Lean principles can improve logistics costs and user satisfaction. In connection with satisfaction, it also aimed to examine which aspects of the service define it and check for differences between different groups of users. The results of an experience to reorganize the hospital logistic system based on some Lean principles have been studied. This is therefore a case study, which combine different methods of data collection. The logistics cost calculation was carried out using the full costing method. To measure satisfaction of healthcare personnel, the internal logistics service users, an anonymous survey was conducted. Processing of the data obtained from the survey have included exploratory analysis, factor analysis and ANOVAs. The data have showed an improvement in logistics management after the implementation of Lean principles. Logistics costs were reduced and the satisfaction level of the internal users with the new logistics system was increased. Some differences in the degree of satisfaction by different groups of users were also detected, although they did not seem to distinguish between different aspects of logistic service. The analyzed experience shows the applicability and suitability of Lean principles to improve logistics operational costs and increase user satisfaction. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Lean NOx catalysis for gasoline fueled European cars

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-02-01

There is increasing interest in operating gasoline fueled passenger cars lean of the stoichiometric air/fuel (A/F) ratio to improve fuel economy. These types of engines will operate at lean A/F ratios while cruising at partial load, and return to stoichiometric or even rich conditions when more power is required. The challenge for the engine and catalyst manufacturer is to develop a system which will combine the high activity rates of a state-of-the-art three-way catalyst (TWC) with the ability to reduce nitrogen oxides (NOx) in the presence of excess oxygen. The objective is to achieve the future legislative limits (EURO III/IV)more » in the European Union. Recent developments in automotive pollution control catalysis show that the use of NOx adsorption materials is a suitable way to reduce NOx emissions of gasoline-fueled lean-burn engines. However, the primary task for the implementation of this technology in the European market will be to improve the catalyst`s high-temperature stability and to decrease its susceptibility to sulfur poisoning. Outlined here are results of a recent R and D program to achieve NOx reduction under lean-burn gasoline engine conditions. Model gas test results as well as engine bench data are used for discussion of the parameters which control NOx adsorption efficiency under various conditions.« less

Lean Gasoline System Development for Fuel Efficient Small Cars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Stuart R.

2013-11-25

The General Motors and DOE cooperative agreement program DE-EE0003379 is completed. The program has integrated and demonstrated a lean-stratified gasoline engine, a lean aftertreatment system, a 12V Stop/Start system and an Active Thermal Management system along with the necessary controls that significantly improves fuel efficiency for small cars. The fuel economy objective of an increase of 25% over a 2010 Chevrolet Malibu and the emission objective of EPA T2B2 compliance have been accomplished. A brief review of the program, summarized from the narrative is: The program accelerates development and synergistic integration of four cost competitive technologies to improve fuel economymore » of a light-duty vehicle by at least 25% while meeting Tier 2 Bin 2 emissions standards. These technologies can be broadly implemented across the U.S. light-duty vehicle product line between 2015 and 2025 and are compatible with future and renewable biofuels. The technologies in this program are: lean combustion, innovative passive selective catalyst reduction lean aftertreatment, 12V stop/start and active thermal management. The technologies will be calibrated in a 2010 Chevrolet Malibu mid-size sedan for final fuel economy demonstration.« less

Lean stability augmentation study. [on gas turbine combustion chambers

NASA Technical Reports Server (NTRS)

Mcvey, J. B.; Kennedy, J. B.

1979-01-01

An analytical conceptual design study and an experimental test program were conducted to investigate techniques and develop technology for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. The use of hot gas pilots, catalyzed flameholder elements, and heat recirculation to augment lean stability limits was considered in the conceptual design study. Tests of flameholders embodying selected concepts were conducted at a pressure of 10 arm and over a range of entrance temperatures simulating conditions to be encountered during stratospheric cruise. The tests were performed using an axisymmetric flametube test rig having a nominal diameter of 10.2 cm. A total of sixteen test configurations were examined in which lean blowout limits, pollutant emission characteristics, and combustor performance were evaluated. The use of a piloted perforated plate flameholder employing a pilot fuel flow rate equivalent to 4 percent of the total fuel flow at a simulated cruise condition resulted in a lean blowout equivalence ratio of less than 0.25 with a design point (T sub zero = 600k, Phi = 0.6) NOx emission index of less than 1.0 g/kg.

Improving Autopsy Report Turnaround Times by Implementing Lean Management Principles.

PubMed

Cromwell, Susan; Chiasson, David A; Cassidy, Debra; Somers, Gino R

2018-01-01

The autopsy is an integral part of the service of a large academic pathology department. Timely reporting is central to providing good service and is beneficial for many stakeholders, including the families, the clinical team, the hospital, and the wider community. The current study aimed to improve hospital-consented autopsy reporting times (turnaround time, TAT) by using lean principles modified for a healthcare setting, with an aim of signing out 90% of autopsies in 90 days. An audit of current and historical TATs was performed, and a working group incorporating administrative, technical, and professional staff constructed a value stream map documenting the steps involved in constructing an autopsy report. Two areas of delay were noted: examination of the microscopy and time taken to sign-out the report after the weekly autopsy conference. Several measures were implemented to address these delays, including visual tracking using a whiteboard and individualized tracking sheets, weekly whiteboard huddles, and timelier scheduling of clinicopathologic conference rounds. All measures resulted in an improvement of TATs. In the 30 months prior to the institution of lean, 37% of autopsies (53/144) were signed out in 90 days, with a wide variation in reporting times. In the 30 months following the institution of lean, this improved to 74% (136/185) ( P < .0001, Fisher exact test), with a marked reduction in variability. Further, the time from autopsy to presentation at weekly clinicopathological rounds was also reduced (median: 73 days prior to lean; 63 days post-lean). The application of lean principles to autopsy sign-out workflow can significantly improve TATs and reduce variability, without changing staffing levels or significantly altering scheduling structure.

Odel of Dynamic Integration of Lean Shop Floor Management Within the Organizational Management System

NASA Astrophysics Data System (ADS)

Iuga, Virginia; Kifor, Claudiu

2014-12-01

The key to achieve a sustainable development lies in the customer satisfaction through improved quality, reduced cost, reduced delivery lead times and proper communication. The objective of the lean manufacturing system (LMS) is to identify and eliminate the processes and resources which do not add value to a product. The following paper aims to present a proposal of further development of integrated management systems in organizations through the implementation of lean shop floor management. In the first part of the paper, a dynamic model of the implementation steps will be presented. Furthermore, the paper underlines the importance of implementing a lean culture parallel with each step of integrating the lean methods and tools. The paper also describes the Toyota philosophy, tools, and the supporting lean culture necessary to implementing an efficient lean system in productive organizations

Applying lean principles to continuous renal replacement therapy processes.

PubMed

Benfield, C Brett; Brummond, Philip; Lucarotti, Andrew; Villarreal, Maria; Goodwin, Adam; Wonnacott, Rob; Talley, Cheryl; Heung, Michael

2015-02-01

The application of lean principles to continuous renal replacement therapy (CRRT) processes in an academic medical center is described. A manual audit over six consecutive weeks revealed that 133 5-L bags of CRRT solution were discarded after being dispensed from pharmacy but before clinical use. Lean principles were used to examine the workflow for CRRT preparation and develop and implement an intervention. An educational program was developed to encourage and enhance direct communication between nursing and pharmacy about changes in a patient's condition or CRRT order. It was through this education program that the reordering workflow shifted from nurses to pharmacy technicians. The primary outcome was the number of CRRT solution bags delivered in the preintervention and postintervention periods. Nurses and pharmacy technicians were surveyed to determine their satisfaction with the workflow change. After implementation of lean principles, the mean number of CRRT solution bags dispensed per day of CRRT decreased substantially. Respondents' overall satisfaction with the CRRT solution preparation process increased during the postintervention period, and the satisfaction scores for each individual component of the workflow after implementation of lean principles. The decreased solution waste resulted in projected annual cost savings exceeding $70,000 in product alone. The use of lean principles to identify medication waste in the CRRT workflow and implementation of an intervention to shift the workload from intensive care unit nurses to pharmacy technicians led to reduced CRRT solution waste, improved efficiency of CRRT workflow, and increased satisfaction among staff. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Caloric Restriction in Lean and Obese Strains of Laboratory ...

EPA Pesticide Factsheets

NEW FINDINGS: What is the central question of this study? How do lean and obese rats respond physiologically to caloric restriction? What is the main finding and its importance? Obese rats show marked benefits compared with lean animals. Reduced body fat is associated with improved longevity with caloric restriction (CR) in rodents. Little is known regarding effects of CR in genetically lean versus obese strains. Long-Evans (LE) and Brown Norway (BN) rats make an ideal comparison for a CR study because the percentage body fat of young adult LE rats is double that of BN rats. Male LE and BN rats were either fed ad libitum (AL) or were caloricallyrestricted to 80 or 90% of their AL weight. The percentages of fat, lean and fluid mass were measured non-invasively at 2- to 4-week intervals. Metabolic rate and respiratory quotient were measured after 3, 6, 9 and 12 months of CR. Overall health was scored monthly. The percentage of fat of the LE strain decreased with CR, whereas the percentage of fat of the BN strain remained above the AL group for several months. The percentage of lean mass increased above the AL for both strains subjected to CR. The percentage offluid was unaffected by CR. The average metabolic rate over 22 h of the BN rats subjected to CR was reduced, whereas that of LE rats was increased slightly above the AL group. The respiratory quotient of BN rats wasdecreased with CR. Overall health of the CR LE group was significantly improved compared with t

Lean Mixture Engines Testing and Evaluation Program : Volume 2. Comprehensive Discussion.

DOT National Transportation Integrated Search

1975-11-01

This report is aimed at defining analytically and demonstrating experimentally the potential of the 'lean-burn concept.' Fuel consumption and emissions data are obtained on the engine dynamometer for the baseline engine, and two lean-burn configurati...

Lean Mixture Engines Testing and Evaluation Program : Volume 1. Executive Summary.

DOT National Transportation Integrated Search

1975-01-01

This report is aimed at defining analytically and demonstrating experimentally the potential of the 'lean-burn concept'. Fuel consumption and emissions data are obtained on the engine dynamometer for the baseline engine, and two lean-burn configurati...

Environmental Professional’s Guide to Lean and Six Sigma: Executive Summary

EPA Pesticide Factsheets

Introduction to the guide that describes how Lean and Six Sigma relate to the environment and provides guidance on how environmental professionals can connect with Lean and Six Sigma activities to generate better environmental and operational results.

The Role of the Clinical Laboratory in the Future of Health Care: Lean Microbiology

PubMed Central

Samuel, Linoj

2014-01-01

This commentary will introduce lean concepts into the clinical microbiology laboratory. The practice of lean in the clinical microbiology laboratory can remove waste, increase efficiency, and reduce costs. Lean, Six Sigma, and other such management initiatives are useful tools and can provide dividends but must be accompanied by organizational leadership commitment to sustaining the lean culture in the laboratory setting and providing resources and time to work through the process. PMID:24574289

Leaning to the left makes the Eiffel Tower seem smaller: posture-modulated estimation.

PubMed

Eerland, Anita; Guadalupe, Tulio M; Zwaan, Rolf A

2011-12-01

In two experiments, we investigated whether body posture influences people's estimation of quantities. According to the mental-number-line theory, people mentally represent numbers along a line with smaller numbers on the left and larger numbers on the right. We hypothesized that surreptitiously making people lean to the right or to the left would affect their quantitative estimates. Participants answered estimation questions while standing on a Wii Balance Board. Posture was manipulated within subjects so that participants answered some questions while they leaned slightly to the left, some questions while they leaned slightly to the right, and some questions while they stood upright. Crucially, participants were not aware of this manipulation. Estimates were significantly smaller when participants leaned to the left than when they leaned to the right.

Assessment of insulin resistance in lean women with polycystic ovary syndrome.

PubMed

Morciano, Andrea; Romani, Federica; Sagnella, Francesca; Scarinci, Elisa; Palla, Carola; Moro, Francesca; Tropea, Anna; Policola, Caterina; Della Casa, Silvia; Guido, Maurizio; Lanzone, Antonio; Apa, Rosanna

2014-07-01

To develop and validate a specific simple measure of insulin sensitivity using oral glucose tolerance test (OGTT) values for lean polycystic ovary syndrome (PCOS) women. Retrospective study. Gynecologic Outpatient Clinic of University Hospital, affiliated with Unit of Gynecologic Endocrinology. Totals of 201 lean and 198 overweight/obese (ov-ob) nondiabetic PCOS patients were retrospectively selected. None. All patients underwent OGTT, euglycemic-hyperinsulinemic clamp, and androgenic and biochemical assays. The predictive performance of each insulin resistance (IR) index was analyzed with the use of receiver operating characteristic (ROC) curves. Higher correlation coefficients with clamp studies were obtained with the Belfiore Area (RS=0.579) and the homeostasis-model assessment (HOMA)-M120 (RS=-0.576) in lean PCOS patients and with the Sib (RS=0.697) in ov-ob PCOS patients. The best predictive index of IR in lean PCOS was a HOMA-M120 value of ≥12.8 or more (area under the ROC curve [AUC] 92.4%). In the ov-ob PCOS population, the best predictive performance was obtained by a Sib of ≤10.2 or less (AUC 85.7%). IR should be assessed in all PCOS women, both lean and ov-ob subjects. The HOMA-M120 resulted as a very simple tool, validated specifically for the lean PCOS woman whose cardiometabolic impairment is more frequently misunderstood. Copyright © 2014 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Large meta-analysis of genome-wide association studies identifies five loci for lean body mass.

PubMed

Zillikens, M Carola; Demissie, Serkalem; Hsu, Yi-Hsiang; Yerges-Armstrong, Laura M; Chou, Wen-Chi; Stolk, Lisette; Livshits, Gregory; Broer, Linda; Johnson, Toby; Koller, Daniel L; Kutalik, Zoltán; Luan, Jian'an; Malkin, Ida; Ried, Janina S; Smith, Albert V; Thorleifsson, Gudmar; Vandenput, Liesbeth; Hua Zhao, Jing; Zhang, Weihua; Aghdassi, Ali; Åkesson, Kristina; Amin, Najaf; Baier, Leslie J; Barroso, Inês; Bennett, David A; Bertram, Lars; Biffar, Rainer; Bochud, Murielle; Boehnke, Michael; Borecki, Ingrid B; Buchman, Aron S; Byberg, Liisa; Campbell, Harry; Campos Obanda, Natalia; Cauley, Jane A; Cawthon, Peggy M; Cederberg, Henna; Chen, Zhao; Cho, Nam H; Jin Choi, Hyung; Claussnitzer, Melina; Collins, Francis; Cummings, Steven R; De Jager, Philip L; Demuth, Ilja; Dhonukshe-Rutten, Rosalie A M; Diatchenko, Luda; Eiriksdottir, Gudny; Enneman, Anke W; Erdos, Mike; Eriksson, Johan G; Eriksson, Joel; Estrada, Karol; Evans, Daniel S; Feitosa, Mary F; Fu, Mao; Garcia, Melissa; Gieger, Christian; Girke, Thomas; Glazer, Nicole L; Grallert, Harald; Grewal, Jagvir; Han, Bok-Ghee; Hanson, Robert L; Hayward, Caroline; Hofman, Albert; Hoffman, Eric P; Homuth, Georg; Hsueh, Wen-Chi; Hubal, Monica J; Hubbard, Alan; Huffman, Kim M; Husted, Lise B; Illig, Thomas; Ingelsson, Erik; Ittermann, Till; Jansson, John-Olov; Jordan, Joanne M; Jula, Antti; Karlsson, Magnus; Khaw, Kay-Tee; Kilpeläinen, Tuomas O; Klopp, Norman; Kloth, Jacqueline S L; Koistinen, Heikki A; Kraus, William E; Kritchevsky, Stephen; Kuulasmaa, Teemu; Kuusisto, Johanna; Laakso, Markku; Lahti, Jari; Lang, Thomas; Langdahl, Bente L; Launer, Lenore J; Lee, Jong-Young; Lerch, Markus M; Lewis, Joshua R; Lind, Lars; Lindgren, Cecilia; Liu, Yongmei; Liu, Tian; Liu, Youfang; Ljunggren, Östen; Lorentzon, Mattias; Luben, Robert N; Maixner, William; McGuigan, Fiona E; Medina-Gomez, Carolina; Meitinger, Thomas; Melhus, Håkan; Mellström, Dan; Melov, Simon; Michaëlsson, Karl; Mitchell, Braxton D; Morris, Andrew P; Mosekilde, Leif; Newman, Anne; Nielson, Carrie M; O'Connell, Jeffrey R; Oostra, Ben A; Orwoll, Eric S; Palotie, Aarno; Parker, Stephen C J; Peacock, Munro; Perola, Markus; Peters, Annette; Polasek, Ozren; Prince, Richard L; Räikkönen, Katri; Ralston, Stuart H; Ripatti, Samuli; Robbins, John A; Rotter, Jerome I; Rudan, Igor; Salomaa, Veikko; Satterfield, Suzanne; Schadt, Eric E; Schipf, Sabine; Scott, Laura; Sehmi, Joban; Shen, Jian; Soo Shin, Chan; Sigurdsson, Gunnar; Smith, Shad; Soranzo, Nicole; Stančáková, Alena; Steinhagen-Thiessen, Elisabeth; Streeten, Elizabeth A; Styrkarsdottir, Unnur; Swart, Karin M A; Tan, Sian-Tsung; Tarnopolsky, Mark A; Thompson, Patricia; Thomson, Cynthia A; Thorsteinsdottir, Unnur; Tikkanen, Emmi; Tranah, Gregory J; Tuomilehto, Jaakko; van Schoor, Natasja M; Verma, Arjun; Vollenweider, Peter; Völzke, Henry; Wactawski-Wende, Jean; Walker, Mark; Weedon, Michael N; Welch, Ryan; Wichmann, H-Erich; Widen, Elisabeth; Williams, Frances M K; Wilson, James F; Wright, Nicole C; Xie, Weijia; Yu, Lei; Zhou, Yanhua; Chambers, John C; Döring, Angela; van Duijn, Cornelia M; Econs, Michael J; Gudnason, Vilmundur; Kooner, Jaspal S; Psaty, Bruce M; Spector, Timothy D; Stefansson, Kari; Rivadeneira, Fernando; Uitterlinden, André G; Wareham, Nicholas J; Ossowski, Vicky; Waterworth, Dawn; Loos, Ruth J F; Karasik, David; Harris, Tamara B; Ohlsson, Claes; Kiel, Douglas P

2017-07-19

Lean body mass, consisting mostly of skeletal muscle, is important for healthy aging. We performed a genome-wide association study for whole body (20 cohorts of European ancestry with n = 38,292) and appendicular (arms and legs) lean body mass (n = 28,330) measured using dual energy X-ray absorptiometry or bioelectrical impedance analysis, adjusted for sex, age, height, and fat mass. Twenty-one single-nucleotide polymorphisms were significantly associated with lean body mass either genome wide (p < 5 × 10 -8 ) or suggestively genome wide (p < 2.3 × 10 -6 ). Replication in 63,475 (47,227 of European ancestry) individuals from 33 cohorts for whole body lean body mass and in 45,090 (42,360 of European ancestry) subjects from 25 cohorts for appendicular lean body mass was successful for five single-nucleotide polymorphisms in/near HSD17B11, VCAN, ADAMTSL3, IRS1, and FTO for total lean body mass and for three single-nucleotide polymorphisms in/near VCAN, ADAMTSL3, and IRS1 for appendicular lean body mass. Our findings provide new insight into the genetics of lean body mass.Lean body mass is a highly heritable trait and is associated with various health conditions. Here, Kiel and colleagues perform a meta-analysis of genome-wide association studies for whole body lean body mass and find five novel genetic loci to be significantly associated.

Physical activity modifies the association between dietary protein and lean mass of postmenopausal women

PubMed Central

Martinez, Jessica A.; Wertheim, Betsy C.; Thomson, Cynthia A.; Bea, Jennifer W.; Wallace, Robert; Allison, Matthew; Snetselaa, Linda; Chen, Zhao; Nassir, Rami; Thompson, Patricia A.

2016-01-01

Background Maintenance of lean muscle mass and related strength is associated with lower risk for numerous chronic diseases of aging in women. Objective To evaluate whether the association between dietary protein and lean mass differs by physical activity level, amino acid composition, and body mass index categories. Design Cross-sectional analysis of a prospective cohort. Participants/setting Postmenopausal women from the Women’s Health Initiative with body composition measurements by dual-energy X-ray absorptiometry (n=8,298). Main outcome measures Percent lean mass, percent fat mass and lean body mass index. Statistical analyses performed Linear regression models adjusted for scanner serial number, age, calibrated energy intake, race/ethnicity, neighborhood socioeconomic status, and recreational physical activity were used to determine the relationship between protein intake and body composition measures. Likelihood ratio tests and stratified analysis were used to investigate physical activity and body mass index as potential effect modifiers. Results Biomarker-calibrated protein intake was positively associated with percent lean mass; women in the highest protein quintile had 6.3 percentage points higher lean mass than the lowest quintile (P < 0.001). This difference rose to 8.5 percentage points for physically active women in the highest protein quintile (Pinteraction = 0.023). Percent fat mass and lean body mass index were both inversely related to protein intake (both P < 0.001). Physical activity further reduced percent fat mass (Pinteraction = 0.022) and lean body mass index (Pinteraction = 0.011). Leucine intake was associated with lean mass, as were branched chain amino acids combined (both P < 0.001), but not independent of total protein. All associations were observed for normal-weight, overweight, and obese women. Conclusions Protein consumption up to 2.02 g/kg body weight daily is positively associated with lean mass in postmenopausal women

Physical Activity Modifies the Association between Dietary Protein and Lean Mass of Postmenopausal Women.

PubMed

Martinez, Jessica A; Wertheim, Betsy C; Thomson, Cynthia A; Bea, Jennifer W; Wallace, Robert; Allison, Matthew; Snetselaar, Linda; Chen, Zhao; Nassir, Rami; Thompson, Patricia A

2017-02-01

Maintenance of lean muscle mass and related strength is associated with lower risk for numerous chronic diseases of aging in women. Our aim was to evaluate whether the association between dietary protein and lean mass differs by physical activity level, amino acid composition, and body mass index categories. We performed a cross-sectional analysis of a prospective cohort. Participants were postmenopausal women from the Women's Health Initiative with body composition measurements by dual-energy x-ray absorptiometry (n=8,298). Our study measured percent lean mass, percent fat mass, and lean body mass index. Linear regression models adjusted for scanner serial number, age, calibrated energy intake, race/ethnicity, neighborhood socioeconomic status, and recreational physical activity were used to determine the relationship between protein intake and body composition measures. Likelihood ratio tests and stratified analysis were used to investigate physical activity and body mass index as potential effect modifiers. Biomarker-calibrated protein intake was positively associated with percent lean mass; women in the highest protein quintile had 6.3 percentage points higher lean mass than the lowest quintile (P<0.001). This difference rose to 8.5 percentage points for physically active women in the highest protein quintile (P interaction =0.023). Percent fat mass and lean body mass index were both inversely related to protein intake (both P<0.001). Physical activity further reduced percent fat mass (P interaction =0.022) and lean body mass index (P interaction =0.011). Leucine intake was associated with lean mass, as were branched chain amino acids combined (both P<0.001), but not independent of total protein. All associations were observed for normal-weight, overweight, and obese women. Protein consumption up to 2.02 g/kg body weight daily is positively associated with lean mass in postmenopausal women. Importantly, those that also engage in physical activity have the

Benchmarking performance measurement and lean manufacturing in the rough mill

Treesearch

Dan Cumbo; D. Earl Kline; Matthew S. Bumgardner

2006-01-01

Lean manufacturing represents a set of tools and a stepwise strategy for achieving smooth, predictable product flow, maximum product flexibility, and minimum system waste. While lean manufacturing principles have been successfully applied to some components of the secondary wood products value stream (e.g., moulding, turning, assembly, and finishing), the rough mill is...

Metabolic responses with endothelin antagonism in a model of insulin resistance.

PubMed

Berthiaume, Nathalie; Wessale, Jerry L; Opgenorth, Terry J; Zinker, Bradley A

2005-06-01

Atrasentan, an endothelin antagonist, would have beneficial effects on metabolic responses in a model of insulin resistance. Zucker lean or fatty rats were maintained either on regular (lean and fatty control, n = 12) or atrasentan-treated water (5 mg/kg/d, fatty atrasentan, n = 13) for 6 weeks. There was no significant difference in water intake and body weight with the atrasentan-treated group compared with fatty controls. Although atrasentan had no effect on 3-hour fasting glucose levels, it reduced fasting insulin levels between weeks 2 and 4 of treatment by 53% (fatty control vs fatty atrasentan, P < .01). Atrasentan decreased the incremental area under the plasma glucose response curve ( Delta AUC) after a nutritionally complete meal tolerance test (MTT), by 28% in the atrasentan-treated group compared with fatty controls ( P < .05), and decreased the MTT-induced insulin Delta AUC by 63% in treated animals compared with the fatty control group ( P < .01). In addition, atrasentan significantly decreased the MTT-induced glucose-insulin index Delta AUC by 58% in treated rats compared with fatty controls ( P < .01). In summary, in the Zucker fatty rat, atrasentan significantly reduces (1) 3-hour fasting insulin levels at 4 weeks, (2) glucose and insulin MTT-induced Delta AUCs, and (3) the MTT-induced glucose-insulin index Delta AUC. These results demonstrate an improvement in hyperinsulinemia as well as in glucose tolerance and insulin sensitivity with chronic endothelin antagonism in a model of insulin resistance and suggest that chronic endothelin antagonism may have benefits in the treatment of insulin resistance and/or diabetes.

Improving ED specimen TAT using Lean Six Sigma.

PubMed

Sanders, Janet H; Karr, Tedd

2015-01-01

Lean and Six Sigma are continuous improvement methodologies that have garnered international fame for improving manufacturing and service processes. Increasingly these methodologies are demonstrating their power to also improve healthcare processes. The purpose of this paper is to discuss a case study for the application of Lean and Six Sigma tools in the reduction of turnaround time (TAT) for Emergency Department (ED) specimens. This application of the scientific methodologies uncovered opportunities to improve the entire ED to lab system for the specimens. This case study provides details on the completion of a Lean Six Sigma project in a 1,000 bed tertiary care teaching hospital. Six Sigma's Define, Measure, Analyze, Improve, and Control methodology is very similar to good medical practice: first, relevant information is obtained and assembled; second, a careful and thorough diagnosis is completed; third, a treatment is proposed and implemented; and fourth, checks are made to determine if the treatment was effective. Lean's primary goal is to do more with less work and waste. The Lean methodology was used to identify and eliminate waste through rapid implementation of change. The initial focus of this project was the reduction of turn-around-times for ED specimens. However, the results led to better processes for both the internal and external customers of this and other processes. The project results included: a 50 percent decrease in vials used for testing, a 50 percent decrease in unused or extra specimens, a 90 percent decrease in ED specimens without orders, a 30 percent decrease in complete blood count analysis (CBCA) Median TAT, a 50 percent decrease in CBCA TAT Variation, a 10 percent decrease in Troponin TAT Variation, a 18.2 percent decrease in URPN TAT Variation, and a 2-5 minute decrease in ED registered nurses rainbow draw time. This case study demonstrated how the quantitative power of Six Sigma and the speed of Lean worked in harmony to improve

Lean Manufacturing Improves Emergency Department Throughput and Patient Satisfaction.

PubMed

Kane, Marlena; Chui, Kristen; Rimicci, Janet; Callagy, Patrice; Hereford, James; Shen, Sam; Norris, Robert; Pickham, David

2015-09-01

A multidisciplinary team led by nursing leadership and physicians developed a plan to meet increasing demand and improve the patient experience in the ED without expanding the department's current resources. The approach included Lean tools and engaged frontline staff and physicians. Applying Lean management principles resulted in quicker service, improved patient satisfaction, increased capacity, and reduced resource utilization. Incorporating continuous daily management is necessary for sustainment of continuous improvement activities.

Apparatus and method for burning a lean, premixed fuel/air mixture with low NOx emission

DOEpatents

Kostiuk, Larry W.; Cheng, Robert K.

1996-01-01

An apparatus for enabling a burner to stably burn a lean fuel/air mixture. The burner directs the lean fuel/air mixture in a stream. The apparatus comprises an annular flame stabilizer; and a device for mounting the flame stabilizer in the fuel/air mixture stream. The burner may include a body having an internal bore, in which case, the annular flame stabilizer is shaped to conform to the cross-sectional shape of the bore, is spaced from the bore by a distance greater than about 0.5 mm, and the mounting device mounts the flame stabilizer in the bore. An apparatus for burning a gaseous fuel with low NOx emissions comprises a device for premixing air with the fuel to provide a lean fuel/air mixture; a nozzle having an internal bore through which the lean fuel/air mixture passes in a stream; and a flame stabilizer mounted in the stream of the lean fuel/air mixture. The flame stabilizer may be mounted in the internal bore, in which case, it is shaped and is spaced from the bore as just described. In a method of burning a lean fuel/air mixture, a lean fuel/air mixture is provided, and is directed in a stream; an annular eddy is created in the stream of the lean fuel/air mixture; and the lean fuel/air mixture is ignited at the eddy.

Lean methodology in health care.

PubMed

Kimsey, Diane B

2010-07-01

Lean production is a process management philosophy that examines organizational processes from a customer perspective with the goal of limiting the use of resources to those processes that create value for the end customer. Lean manufacturing emphasizes increasing efficiency, decreasing waste, and using methods to decide what matters rather than accepting preexisting practices. A rapid improvement team at Lehigh Valley Health Network, Allentown, Pennsylvania, implemented a plan, do, check, act cycle to determine problems in the central sterile processing department, test solutions, and document improved processes. By using A3 thinking, a consensus building process that graphically depicts the current state, the target state, and the gaps between the two, the team worked to improve efficiency and safety, and to decrease costs. Use of this methodology has increased teamwork, created user-friendly work areas and processes, changed management styles and expectations, increased staff empowerment and involvement, and streamlined the supply chain within the perioperative area. Copyright (c) 2010 AORN, Inc. Published by Elsevier Inc. All rights reserved.

The Statistical point of view of Quality: the Lean Six Sigma methodology

PubMed Central

Viti, Andrea; Terzi, Alberto

2015-01-01

Six Sigma and Lean are two quality improvement methodologies. The Lean Six Sigma methodology is applicable to repetitive procedures. Therefore, the use of this methodology in the health-care arena has focused mainly on areas of business operations, throughput, and case management and has focused on efficiency outcomes. After the revision of methodology, the paper presents a brief clinical example of the use of Lean Six Sigma as a quality improvement method in the reduction of the complications during and after lobectomies. Using Lean Six Sigma methodology, the multidisciplinary teams could identify multiple modifiable points across the surgical process. These process improvements could be applied to different surgical specialties and could result in a measurement, from statistical point of view, of the surgical quality. PMID:25973253

The Statistical point of view of Quality: the Lean Six Sigma methodology.

PubMed

Bertolaccini, Luca; Viti, Andrea; Terzi, Alberto

2015-04-01

Six Sigma and Lean are two quality improvement methodologies. The Lean Six Sigma methodology is applicable to repetitive procedures. Therefore, the use of this methodology in the health-care arena has focused mainly on areas of business operations, throughput, and case management and has focused on efficiency outcomes. After the revision of methodology, the paper presents a brief clinical example of the use of Lean Six Sigma as a quality improvement method in the reduction of the complications during and after lobectomies. Using Lean Six Sigma methodology, the multidisciplinary teams could identify multiple modifiable points across the surgical process. These process improvements could be applied to different surgical specialties and could result in a measurement, from statistical point of view, of the surgical quality.

Gene expression microarray profiles of cumulus cells in lean and overweight-obese polycystic ovary syndrome patients.

PubMed

Kenigsberg, Shlomit; Bentov, Yaakov; Chalifa-Caspi, Vered; Potashnik, Gad; Ofir, Rivka; Birk, Ohad S

2009-02-01

The aim of this work was to study gene expression patterns of cultured cumulus cells from lean and overweight-obese polycystic ovary syndrome (PCOS) patients using genome-wide oligonucleotide microarray. The study included 25 patients undergoing in vitro fertilization and intra-cytoplasmic sperm injection: 12 diagnosed with PCOS and 13 matching controls. Each of the groups was subdivided into lean (body mass index (BMI) < 24) and overweight (BMI > 27) subgroups. The following comparisons of gene expression data were made: lean PCOS versus lean controls, lean PCOS versus overweight PCOS, all PCOS versus all controls, overweight PCOS versus overweight controls, overweight controls versus lean controls and all overweight versus all lean. The largest number of differentially expressed genes (DEGs), with fold change (FC) |FC| >or= 1.5 and P-value < 0.01, was found in the lean PCOS versus lean controls comparison (487) with most of these genes being down-regulated in PCOS. The second largest group of DEGs originated from the comparison of lean PCOS versus overweight PCOS (305). The other comparisons resulted in a much smaller number of DEGs (174, 109, 125 and 12, respectively). In the comparison of lean PCOS with lean controls, most DEGs were transcription factors and components of the extracellular matrix and two pathways, Wnt/beta-catenin and mitogen-activated protein kinase. When comparing overweight PCOS with overweight controls, most DEGs were of pathways related to insulin signaling, metabolism and energy production. The finding of unique gene expression patterns in cumulus cells from the two PCOS subtypes is in agreement with other studies that have found the two to be separate entities with potentially different pathophysiologies.

Integrating Lean Exploration Loops Into Healthcare Facility Design.

PubMed

Mazur, Lukasz M; Johnson, Kendra; Pooya, Pegah; Chadwick, Janet; McCreery, John

2017-04-01

To explore what, when, and how Lean methods and tools can add value during the programming phase of design through providing additional resources and support to project leadership and the architectural design team. This case study-based research took place at one large academic hospital during design efforts of a surgical tower to house 19 operating rooms (ORs) and support spaces including pre- and postop, central processing and distribution, and materials management. Surgical services project leadership asked for support from Lean practitioners during the design process. Lean exploration loops (LELs) were conducted to generate evidence to support stakeholders, as they made important decisions about the new building design. The analyses conducted during LELs were primarily focused on the relative advantages of a large footprint with few floors or a smaller footprint with more floors and support spaces not collocated adjacent to ORs on the same floor. LELs resulted in quantifications of key operational and design features (e.g., design preferences of employees and patients, horizontal distance travel, and elevator utilization studies), which in turn complemented the architectural design process and created an opportunities to gain buy-in and consensus from stakeholders through their active participation in many of the analyses. We found Lean tools and methods to be of most value during programming phase when focused on the high-level operational and design issues to help establish buy-in and consensus among stakeholders, while acknowledging that there is often not enough design detail to perform accurate analysis.

Integrating Lean Exploration Loops Into Healthcare Facility Design.

PubMed

Johnson, Kendra; M Mazur, Lukasz; Chadwick, Janet; Pooya, Pegah; Amos, Alison; McCreery, John

2017-04-01

To explore how Lean can add value during the schematic phase of design through providing additional resources and support to project leadership and the architectural design team. This case study-based research took place at one large academic hospital during design efforts of surgical tower to house 19 operating rooms (ORs) and support spaces including pre- and post-op, central processing and distribution, and materials management. Surgical services project leadership asked for Lean practitioners' support during the design process. Lean Exploration Loops (LELs) were conducted to generate evidence to support stakeholders, as they made important decisions about the new building design. The analyses conducted during LELs during the schematic phase were primarily conducted using express workouts (EWOs) and were focused on the flow of patients, staff, and family throughout the pavilion. LELs resulted in recommendations for key design features (e.g., number of pre- and post-op bays per OR floor, location of doors, scrub sinks, stretcher alcoves, equipment storage, and sterile core areas). Two-sided pre- and post-op bays with an inner clinical workspace and an outer patient transport corridor were recommended. Communicating elevator and a centrally located stairwell for staff to alleviate stress on the main bank of elevators at peak usage times were also suggested. We found Lean tools and methods to be of most value during schematic phase when focused on detailed process and layout analysis, while acknowledging the usefulness of focused EWOs to generate the evidence needed for the decision-making.

Low NOx, Lean Direct Wall Injection Combustor Concept Developed

NASA Technical Reports Server (NTRS)

Tacina, Robert R.; Wey, Changlie; Choi, Kyung J.

2003-01-01

The low-emissions combustor development at the NASA Glenn Research Center is directed toward advanced high-pressure aircraft gas turbine applications. The emphasis of this research is to reduce nitrogen oxides (NOx) at high-power conditions and to maintain carbon monoxide and unburned hydrocarbons at their current low levels at low-power conditions. Low-NOx combustors can be classified into rich burn and lean burn concepts. Lean burn combustors can be further classified into lean-premixed-prevaporized (LPP) and lean direct injection (LDI) combustors. In both concepts, all the combustor air, except for liner cooling flow, enters through the combustor dome so that the combustion occurs at the lowest possible flame temperature. The LPP concept has been shown to have the lowest NOx emissions, but for advanced high-pressure-ratio engines, the possibly of autoignition or flashback precludes its use. LDI differs from LPP in that the fuel is injected directly into the flame zone and, thus, does not have the potential for autoignition or flashback and should have greater stability. However, since it is not premixed and prevaporized, the key is good atomization and mixing of the fuel quickly and uniformly so that flame temperatures are low and NOx formation levels are comparable to those of LPP.

Facilitating Teamwork with Lean Six Sigma and Web-Based Technology

ERIC Educational Resources Information Center

Krause, Tim

2009-01-01

In this article, the author outlines a variety of ways of defining, making explicit, and supporting effective team-based projects through the basic tenets of Lean Six Sigma and the use of Web-based technologies. A combination of Lean Six Sigma and a handful of project management technologies not only help in fostering the communication central to…

A case study on Measurement of Degree of Performance of an Industry by using Lean Score Technique

NASA Astrophysics Data System (ADS)

Srinivasa Rao, P.; Niraj, Malay

2016-09-01

Lean manufacturing concept is becoming a very important strategy for both academicians and practitioners in the recent times, and Japanese are using this practice for more than a decade. In this present scenario, this paper describes an innovative approach for lean performance evaluation by using fuzzy membership functions before and after implementing lean manufacturing techniques and formulating a model to establish the lean score through the lean attributes by eliminating major losses. It shows a systematic lean performance measurement by producing a final integrated unit less-score.

β cell function and insulin resistance in lean cases with polycystic ovary syndrome.

PubMed

Pande, Arunkumar R; Guleria, Ashwani Kumar; Singh, Sudhanshu Dev; Shukla, Manoj; Dabadghao, Preeti

2017-11-01

Obesity is a major factor in development of insulin resistance (IR) and metabolic features in polycystic ovary syndrome (PCOS) patients. Nearly two-thirds patients with PCOS (30 of 37 confirmed cases of PCOS) in our previous community based study were lean, in contrast to Caucasians. Metabolic parameters including IR and β cell function have not been characterized well in this group of lean PCOS. To study the metabolic features including IR and β cell function in lean PCOS patients, 53 patients with BMI, <23 kg/m 2 were compared with 71 obese PCOS and 45 age and body mass index matched controls. Lean patients had similar β cell function and IR as compared to controls and obese patients, though the latter group had more metabolic abnormality. Fasting c-peptide and its ratio to glucose were significantly higher in lean patients compared to controls. In subset of subjects with five point OGTT, disposition index and Matsuda index (MI) showed significant negative correlation with BMI and blood pressure. MI also negatively correlated with waist, WHR, and HOMAB. High fasting C-peptide is probably a class effect as is seen in both lean and obese PCOS.

Lean interventions in healthcare: do they actually work? A systematic literature review.

PubMed

Moraros, John; Lemstra, Mark; Nwankwo, Chijioke

2016-04-01

Lean is a widely used quality improvement methodology initially developed and used in the automotive and manufacturing industries but recently expanded to the healthcare sector. This systematic literature review seeks to independently assess the effect of Lean or Lean interventions on worker and patient satisfaction, health and process outcomes, and financial costs. We conducted a systematic literature review of Medline, PubMed, Cochrane Library, CINAHL, Web of Science, ABI/Inform, ERIC, EMBASE and SCOPUS. Peer reviewed articles were included if they examined a Lean intervention and included quantitative data. Methodological quality was assessed using validated critical appraisal checklists. Publically available data collected by the Saskatchewan Health Quality Council and the Saskatchewan Union of Nurses were also analysed and reported separately. Data on design, methods, interventions and key outcomes were extracted and collated. Our electronic search identified 22 articles that passed methodological quality review. Among the accepted studies, 4 were exclusively concerned with health outcomes, 3 included both health and process outcomes and 15 included process outcomes. Our study found that Lean interventions have: (i) no statistically significant association with patient satisfaction and health outcomes; (ii) a negative association with financial costs and worker satisfaction and (iii) potential, yet inconsistent, benefits on process outcomes like patient flow and safety. While some may strongly believe that Lean interventions lead to quality improvements in healthcare, the evidence to date simply does not support this claim. More rigorous, higher quality and better conducted scientific research is required to definitively ascertain the impact and effectiveness of Lean in healthcare settings. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care.

Lean interventions in healthcare: do they actually work? A systematic literature review

PubMed Central

Moraros, John; Lemstra, Mark; Nwankwo, Chijioke

2016-01-01

Purpose Lean is a widely used quality improvement methodology initially developed and used in the automotive and manufacturing industries but recently expanded to the healthcare sector. This systematic literature review seeks to independently assess the effect of Lean or Lean interventions on worker and patient satisfaction, health and process outcomes, and financial costs. Data sources We conducted a systematic literature review of Medline, PubMed, Cochrane Library, CINAHL, Web of Science, ABI/Inform, ERIC, EMBASE and SCOPUS. Study selection Peer reviewed articles were included if they examined a Lean intervention and included quantitative data. Methodological quality was assessed using validated critical appraisal checklists. Publically available data collected by the Saskatchewan Health Quality Council and the Saskatchewan Union of Nurses were also analysed and reported separately. Data extraction Data on design, methods, interventions and key outcomes were extracted and collated. Results of data synthesis Our electronic search identified 22 articles that passed methodological quality review. Among the accepted studies, 4 were exclusively concerned with health outcomes, 3 included both health and process outcomes and 15 included process outcomes. Our study found that Lean interventions have: (i) no statistically significant association with patient satisfaction and health outcomes; (ii) a negative association with financial costs and worker satisfaction and (iii) potential, yet inconsistent, benefits on process outcomes like patient flow and safety. Conclusion While some may strongly believe that Lean interventions lead to quality improvements in healthcare, the evidence to date simply does not support this claim. More rigorous, higher quality and better conducted scientific research is required to definitively ascertain the impact and effectiveness of Lean in healthcare settings. PMID:26811118

An exploratory analysis for Lean and Six Sigma implementation in hospitals: Together is better?

PubMed

Lee, Jung Young; McFadden, Kathleen L; Gowen, Charles R

Despite the increasing interest for Lean and Six Sigma implementations in hospitals, there has been little empirical evidence that goes beyond descriptive case studies to address the current status and the effectiveness of the implementations. The aim of this study was to explore existing patterns of Lean and Six Sigma implementation in U.S. hospitals and compare the performance of the different patterns. We collected data from 215 U.S. hospitals via a survey that includes measurement items developed from related literature. Using the cross-sectional data, we conducted a cluster analysis, followed by t tests, chi-square tests, and regression analyses for cluster verification. The cluster analysis identifies two clusters, a Moderate Six Sigma group and a Lean Six Sigma group. Results show that the Lean Six Sigma group outperforms the Moderate Six Sigma group across many performance dimensions: responsiveness capability, patient safety, and possibly cost saving. In addition, the Lean Six Sigma group tends to be composed of larger, private teaching hospitals located in more urban areas, and they employ more resources for quality improvement. Our research contributes to the quality management literature by supporting the possible complementary relationship between Lean and Six Sigma in hospitals. Our study encourages practitioners and managers to pay more attention to Lean implementation. Although Lean seems to be conducted in a limited fashion in many hospitals, it should be expanded and combined with Six Sigma for better results.

Kit para aplicar la metodología de Lean en el gobierno

EPA Pesticide Factsheets

Este Kit para comenzar a aplicar la metodología Lean (Gobierno optimizado) ofrece información para ayudar a las agencias de protección ambiental a planificar e implementar iniciativas Lean exitosas.

Healthcare workers' perceptions of lean: a context-sensitive, mixed methods study in three Swedish hospitals.

PubMed

Holden, Richard J; Eriksson, Andrea; Andreasson, Jörgen; Williamsson, Anna; Dellve, Lotta

2015-03-01

As the application of lean in healthcare expands, further research is needed in at least two areas: first, on the role of context in shaping lean and its consequences and second, on how healthcare workers perceive lean. Accordingly, this context-sensitive, mixed methods study addressed how hospital workers' perceptions of lean varied across contexts in three Swedish hospitals. Registered nurses and physicians at the hospitals and across units differing in acuity completed standardized surveys (N = 236, 57% response rate) about their perceptions of hospital-wide lean implementation. Perceptions varied by: hospital context, with one hospital's employees reporting the least favorable perceptions; unit acuity, with higher-acuity units reporting more favorable perceptions; and professional role, with nurses reporting more favorable perceptions than physicians. Individual interviews, group interviews, and observations provided insight about these dissimilar contexts and possible explanations for context-specific variability. Findings are discussed with respect to strategies for implementing lean in healthcare; the importance of attending to levels, context, and worker consequences of lean; and directions for future research. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Healthcare workers' perceptions of lean: A context-sensitive, mixed methods study in three Swedish hospitals

PubMed Central

Holden, Richard J.; Eriksson, Andrea; Andreasson, Jörgen; Williamsson, Anna; Dellve, Lotta

2014-01-01

As the application of lean in healthcare expands, further research is needed in at least two areas: first, on the role of context in shaping lean and its consequences and second, on how healthcare workers perceive lean. Accordingly, this context-sensitive, mixed methods study addressed how hospital workers' perceptions of lean varied across contexts in three Swedish hospitals. Registered nurses and physicians at the hospitals and across units differing in acuity completed standardized surveys (N=236, 57% response rate) about their perceptions of hospital-wide lean implementation. Perceptions varied by: hospital context, with one hospital's employees reporting the least favorable perceptions; unit acuity, with higher-acuity units reporting more favorable perceptions; and professional role, with nurses reporting more favorable perceptions than physicians. Individual interviews, group interviews, and observations provided insight about these dissimilar contexts and possible explanations for context-specific variability. Findings are discussed with respect to strategies for implementing lean in healthcare; the importance of attending to levels, context, and worker consequences of lean; and directions for future research. PMID:25479987

Critical Success Factors for Lean Thinking in the Application of Industrialised Building System (IBS)

NASA Astrophysics Data System (ADS)

Yunus, Riduan; Noor, Siti Rahimah Mohd; Halid Abdullah, Abd; Nagapan, Sasitharan; Hamid, Abdul Rahim Abdul; Tajudin, Saiful Azhar Ahmad; Rohani Mat Jusof, Siti

2017-08-01

Productivity in the manufacturing process of building components can be increased by optimising each advantage that is available in each activity. Identification of critical success factors (CSFs) for lean thinking in the Industrialised Building System (IBS) will be able to minimise cost and reduce time needed to complete a project. The focus of lean thinking in construction is on the production process and the client’s requirement. In developing countries such as Malaysia, the integration of lean thinking in IBS applications is still low and there is a shortage of comprehensive strategies to integrate lean thinking. As key stakeholders, feedback from contractors, manufacturers, developers and the local authority will be able to help the identification of CSFs in integrating lean thinking in IBS applications. The data was collected through a questionnaire survey and analysed quantitatively. There are 31 CSFs for lean thinking in IBS which have been identified in this study. A conceptual model was developed to assist researchers in investigating the influences of CSFs for lean thinking in IBS applications. This study will assist construction players to improvise their manufacturing process in the implementation of IBS to eliminate unnecessary activities and focus instead on significant processes without generating physical and non-physical waste.

A questionnaire measuring staff perceptions of Lean adoption in healthcare: development and psychometric testing.

PubMed

Kaltenbrunner, Monica; Bengtsson, Lars; Mathiassen, Svend Erik; Engström, Maria

2017-03-24

During the past decade, the concept of Lean has spread rapidly within the healthcare sector, but there is a lack of instruments that can measure staff's perceptions of Lean adoption. Thus, the aim of the present study was to develop a questionnaire measuring Lean in healthcare, based on Liker's description of Lean, by adapting an existing instrument developed for the service sector. A mixed-method design was used. Initially, items from the service sector instrument were categorized according to Liker's 14 principles describing Lean within four domains: philosophy, processes, people and partners and problem-solving. Items were lacking for three of Liker's principles and were therefore developed de novo. Think-aloud interviews were conducted with 12 healthcare staff from different professions to contextualize and examine the face validity of the questionnaire prototype. Thereafter, the adjusted questionnaire's psychometric properties were assessed on the basis of a cross-sectional survey among 386 staff working in primary care. The think-aloud interviews led to adjustments in the questionnaire to better suit a healthcare context, and the number of items was reduced. Confirmatory factor analysis of the adjusted questionnaire showed a generally acceptable correspondence with Liker's description of Lean. Internal consistency, measured using Cronbach's alpha, for the factors in Liker's description of Lean was 0.60 for the factor people and partners, and over 0.70 for the three other factors. Test-retest reliability measured by the intra-class correlation coefficient ranged from 0.77 to 0.88 for the four factors. We designed a questionnaire capturing staff's perceptions of Lean adoption in healthcare on the basis of Liker's description. This Lean in Healthcare Questionnaire (LiHcQ) showed generally acceptable psychometric properties, which supports its usability for measuring Lean adoption in healthcare. We suggest that further research focus on verifying the usability of

Using Lean Process Improvement to Enhance Safety and Value in Orthopaedic Surgery: The Case of Spine Surgery.

PubMed

Sethi, Rajiv; Yanamadala, Vijay; Burton, Douglas C; Bess, Robert Shay

2017-11-01

Lean methodology was developed in the manufacturing industry to increase output and decrease costs. These labor organization methods have become the mainstay of major manufacturing companies worldwide. Lean methods involve continuous process improvement through the systematic elimination of waste, prevention of mistakes, and empowerment of workers to make changes. Because of the profit and productivity gains made in the manufacturing arena using lean methods, several healthcare organizations have adopted lean methodologies for patient care. Lean methods have now been implemented in many areas of health care. In orthopaedic surgery, lean methods have been applied to reduce complication rates and create a culture of continuous improvement. A step-by-step guide based on our experience can help surgeons use lean methods in practice. Surgeons and hospital centers well versed in lean methodology will be poised to reduce complications, improve patient outcomes, and optimize cost/benefit ratios for patient care.

Lean Mass Asymmetry Influences Force and Power Asymmetry During Jumping in Collegiate Athletes

PubMed Central

Bell, David R.; Sanfilippo, Jennifer L.; Binkley, Neil; Heiderscheit, Bryan C.

2015-01-01

The purpose of this investigation was to: (1) examine how asymmetry in lower extremity lean mass influenced force and power asymmetry during jumping, (2) determine how power and force asymmetry affected jump height, and (3) report normative values in collegiate athletes. Force and power were assessed from each limb using bilateral force plates during a countermovement jump in 167 Division 1 athletes (mass=85.7±20.3kg, age=20.0±1.2years, 103M/64F). Lean mass of the pelvis, thigh, and shank was assessed via dual-energy X-ray absorptiometry. Percent asymmetry was calculated for lean mass at each region (pelvis, thigh, and shank) as well as force and power. Forward stepwise regressions were performed to determine the influence of lean mass asymmetry on force and power asymmetry. Thigh and shank lean mass asymmetry explained 20% of the variance in force asymmetry (R2=0.20, P<0.001), while lean mass asymmetry of the pelvis, thigh and shank explained 25% of the variance in power asymmetry (R2=0.25, P<0.001). Jump height was compared across level of force and power asymmetry (P>0.05) and greater than 10% asymmetry in power tended to decrease performance (effect size>1.0). Ninety-five percent of this population (2.5th to 97.5th percentile) displayed force asymmetry between −11.8 to 16.8% and a power asymmetry between −9.9 to 11.5%. A small percentage (<4%) of these athletes displayed more than 15% asymmetry between limbs. These results demonstrate that lean mass asymmetry in the lower extremity is at least partially responsible for asymmetries in force and power. However, a large percentage remains unexplained by lean mass asymmetry. PMID:24402449

Lean mass asymmetry influences force and power asymmetry during jumping in collegiate athletes.

PubMed

Bell, David R; Sanfilippo, Jennifer L; Binkley, Neil; Heiderscheit, Bryan C

2014-04-01

The purpose of this investigation was to (a) examine how asymmetry in lower extremity lean mass influenced force and power asymmetry during jumping, (b) determine how power and force asymmetry affected jump height, and (c) report normative values in collegiate athletes. Force and power were assessed from each limb using bilateral force plates during a countermovement jump in 167 division 1 athletes (mass = 85.7 ± 20.3 kg, age = 20.0 ± 1.2 years; 103 men and 64 women). Lean mass of the pelvis, thigh, and shank was assessed using dual-energy x-ray absorptiometry. Percent asymmetry was calculated for lean mass at each region (pelvis, thigh, and shank) as well as force and power. Forward stepwise regressions were performed to determine the influence of lean mass asymmetry on force and power asymmetry. Thigh and shank lean mass asymmetry explained 20% of the variance in force asymmetry (R = 0.20, p < 0.001), whereas lean mass asymmetry of the pelvis, thigh, and shank explained 25% of the variance in power asymmetry (R = 0.25, p < 0.001). Jump height was compared across level of force and power asymmetry (p > 0.05) and greater than 10% asymmetry in power tended to decrease the performance (effect size >1.0). Ninety-five percent of this population (2.5th to 97.5th percentile) displayed force asymmetry between -11.8 and 16.8% and a power asymmetry between -9.9 and 11.5%. A small percentage (<4%) of these athletes displayed more than 15% asymmetry between limbs. These results demonstrate that lean mass asymmetry in the lower extremity is at least partially responsible for asymmetries in force and power. However, a large percentage remains unexplained by lean mass asymmetry.

Engineering brown fat into skeletal muscle using ultrasound-targeted microbubble destruction gene delivery in obese Zucker rats: Proof of concept design.

PubMed

Bastarrachea, Raul A; Chen, Jiaxi; Kent, Jack W; Nava-Gonzalez, Edna J; Rodriguez-Ayala, Ernesto; Daadi, Marcel M; Jorge, Barbara; Laviada-Molina, Hugo; Comuzzie, Anthony G; Chen, Shuyuan; Grayburn, Paul A

2017-09-01

Ultrasound-targeted microbubble destruction (UTMD) is a novel means of tissue-specific gene delivery. This approach systemically infuses transgenes precoupled to gas-filled lipid microbubbles that are burst within the microvasculature of target tissues via an ultrasound signal resulting in release of DNA and transfection of neighboring cells within the tissue. Previous work has shown that adenovirus containing cDNA of UCP-1, injected into the epididymal fat pads in mice, induced localized fat depletion, improving glucose tolerance, and decreasing food intake in obese diabetic mice. Our group recently demonstrated that gene therapy by UTMD achieved beta cell regeneration in streptozotocin (STZ)-treated mice and baboons. We hypothesized that gene therapy with BMP7/PRDM16/PPARGC1A in skeletal muscle (SKM) of obese Zucker diabetic fatty (fa/fa) rats using UTMD technology would produce a brown adipose tissue (BAT) phenotype with UCP-1 overexpression. This study was designed as a proof of concept (POC) project. Obese Zucker rats were administered plasmid cDNA contructs encoding a gene cocktail with BMP7/PRDM16/PPARGC1A incorporated within microbubbles and intravenously delivered into their left thigh. Controls received UTMD with plasmids driving a DsRed reporter gene. An ultrasound transducer was directed to the thigh to disrupt the microbubbles within the microcirculation. Blood samples were drawn at baseline, and after treatment to measure glucose, insulin, and free fatty acids levels. SKM was harvested for immunohistochemistry (IHC). Our IHC results showed a reliable pattern of effective UTMD-based gene delivery in enhancing SKM overexpression of the UCP-1 gene. This clearly indicates that our plasmid DNA construct encoding the gene combination of PRDM16, PPARGC1A, and BMP7 reprogrammed adult SKM tissue into brown adipose cells in vivo. Our pilot established POC showing that the administration of the gene cocktail to SKM in this rat model of genetic obesity using UTMD

Management simulations for Lean healthcare: exploiting the potentials of role-playing.

PubMed

Barnabè, Federico; Giorgino, Maria Cleofe; Guercini, Jacopo; Bianciardi, Caterina; Mezzatesta, Vincenzo

2018-04-09

Purpose The purpose of this paper is to investigate the potentials of role-playing (RP) both in training healthcare (HC) professionals to implement tools and improvement actions based on Lean principles, and in supporting group discussion and the sharing of different competencies for the development of Lean HC. Design/methodology/approach The paper presents the case study of an RP simulation called LEAN HEALTHCARE LAB, which is used to train HC professionals at Siena University Hospital. The paper reports and discusses the results of a specific two-day simulation session and of a questionnaire that was distributed to gather feedback from the participants. Findings The paper verifies the potentials of RP to be a powerful educational and training tool that is able to stimulate the HC participants to apply Lean thinking principles and share their competencies in collaborative decision-making processes. Research limitations/implications The study provides data in reference to one single simulation session, although the game has already been applied several times in different HC organizations with very similar outcomes. Moreover, a more in-depth analysis of players' perceptions and decisions could be performed using different tools in addition to the adopted questionnaire. Practical implications RP games (RPGs) are effective training and educational tools for HC professionals. They offer benefits and learning conditions which are definitely different if compared with more conventional education programs for HC professionals. Originality/value While previous studies have extensively discussed the potentialities of RPG and simulations in training programs, only a few articles have discussed the RP adoption for Lean thinking and even less to educate HC professionals on Lean principles and tools.

Lean burn natural gas fueled S.I. engine and exhaust emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Varde, K.S.; Patro, N.; Drouillard, K.

1995-12-31

An experimental study was undertaken to study exhaust emission from a lean-burn natural gas spark ignition engine. The possibility that such an engine may help to reduce exhaust emissions substantially by taking advantage of natural gas fuel properties, such as its antiknock properties and extended lean flammability limit compared to gasoline, was the main motivation behind the investigation. A four cylinder, automotive type spark ignition engine was used in the investigation. The engine was converted to operate on natural gas by replacing its fuel system with a gaseous carburetion system. A 3-way metal metrix catalytic converter was used in themore » engine exhaust system to reduce emission levels. The engine operated satisfactorily at an equivalence ratio as lean as 0.6, at all speeds and loads. As a result NOx emissions were significantly reduced. However, hydrocarbon emissions were high, particularly at very lean conditions and light loads. Most of these hydrocarbons were made up of methane with small concentrations of ethane and propane. Coefficient of variations in hydrocarbons were generally high at very lean operating conditions and light loads, but decreased with increasing equivalence ratio and engine speed. Methane concentrations in the engine exhaust decreased with increasing load and equivalence ratio. At lean air-to-fuel ratios and light loads oxidation of methane in the catalyst was substantially limited and no NOx reduction was achieved. In addition, the proportion of nitric oxide in oxides of nitrogen increased with increasing amount of NOx in the engine exhaust. A major problem encountered in the study was the inability of the fuel system to maintain near constant air-to-fuel ratios at steady operating conditions.« less

Redesigning assembly stations using ergonomic methods as a lean tool.

PubMed

Eswaramoorthi, M; John, Mervyn; Rajagopal, C Arjun; Prasad, P S S; Mohanram, P V

2010-01-01

With the current state of the global economy, demand for various products plummeting. To sustain in the market, companies have to reduce cost and improve quality. Today, companies have started implementing new philosophies like TQM, TPM, six sigma and lean manufacturing techniques to remain competitive in the market. Lean manufacturing is an emerging philosophy which continuously strives to reduce waste. The main objective of analyzing the assembly line with a lean perspective is to identify the areas related to human interface with other systems that could lead to the generation of waste. Improper workplace design leads to unreasonable mental or physical burden and results in waste generation like slow work (delay and inventory), and defects, which is named as muri waste. An attempt has been made in this paper to locate muri waste and create a "Lean assembly line". The proposed method, based on the use of Rapid Upper Limb Assessment (RULA) with CATIA V5 platform, has allowed the measurement of a large set of operator posture parameters and assessment of ergonomic stresses. Based on the results, the process stations in the assembly line were redesigned to prevent the generation of waste.

Lean Construction Applications for Bridge Inspection

DOT National Transportation Integrated Search

2017-10-01

Lean philosophy was used to analyze the efficiency of bridge inspection. Emphasis was put on identifying activities that add value to the final output, an owner approved bridge inspection report. 26 bridge inspections were shadowed. Time spent on bri...

Developing weighted criteria to evaluate lean reverse logistics through analytical network process

NASA Astrophysics Data System (ADS)

Zagloel, Teuku Yuri M.; Hakim, Inaki Maulida; Krisnawardhani, Rike Adyartie

2017-11-01

Reverse logistics is a part of supply chain that bring materials from consumers back to manufacturer in order to gain added value or do a proper disposal. Nowadays, most companies are still facing several problems on reverse logistics implementation which leads to high waste along reverse logistics processes. In order to overcome this problem, Madsen [Framework for Reverse Lean Logistics to Enable Green Manufacturing, Eco Design 2009: 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Sapporo, 2009] has developed a lean reverse logistics framework as a step to eliminate waste by implementing lean on reverse logistics. However, the resulted framework sets aside criteria used to evaluate its performance. This research aims to determine weighted criteria that can be used as a base on reverse logistics evaluation by considering lean principles. The resulted criteria will ensure reverse logistics are kept off from waste, thus implemented efficiently. Analytical Network Process (ANP) is used in this research to determine the weighted criteria. The result shows that criteria used for evaluation lean reverse logistics are Innovation and Learning (35%), Economic (30%), Process Flow Management (14%), Customer Relationship Management (13%), Environment (6%), and Social (2%).

Prioritizing lean management practices in public and private hospitals.

PubMed

Hussain, Matloub; Malik, Mohsin

2016-05-16

Purpose - The purpose of this paper is to prioritize 21 healthcare wastes in public and private hospitals of United Arab Emirates (UAE). Design/methodology/approach - Seven healthcare wastes linked with lean management are further decomposed in to sub-criteria and to deal with this complexity of multi criteria decision-making process, analytical hierarchical process (AHP) method is used in this research. Findings - AHP framework for this study resulted in a ranking of 21 healthcare wastes in public and private hospitals of UAE. It has been found that management in private healthcare systems of UAE is putting more emphasis on the inventory waste. On the other hand, over processing waste has got highest weight in public hospitals of UAE. Research limitations/implications - The future directions of this research would be to apply a lean set of tools for the value stream optimization of the prioritized key improvement areas. Practical implications - This is a contribution to the continuing research into lean management, giving practitioners and designers a practical way for measuring and implementing lean practices across health organizations. Originality/value - The contribution of this research, through successive stages of data collection, measurement analysis and refinement, is a set of reliable and valid framework that can be subsequently used in conceptualization, prioritization of the waste reduction strategies in healthcare management.

The effect of lean manufacturing (LM) on environmental performance: A review study

NASA Astrophysics Data System (ADS)

Alaa, A. S.; Shaiful, A. I. M.; Zuraidah, M. Z.; Khalaf, A. M.

2017-09-01

Nowadays, lean manufacturing strategy is very much used to eliminate waste on the manufacturing shop floor. Lean manufacturing has been formulated in response to the fluctuating and competitive business environment. Although it first started in the automotive industry, many organizations in different sectors are enthusiastic to adopt it in order to improve their performance in this competitive globalized market. The aim of this paper is to review the current level of implementation of lean manufacturing practices and the affects of these practices on organizational performances in a multitude of sectors in Malaysian industries. The study is carried out through a thorough review of the literature. It is observed that lean manufacturing is increasingly getting the appropriate attention in Malaysian industries. There are also many challenges in the way, of which numerous attempts are undertaken to overcome them.

[FACTORS WHICH INFLUENCE THE LEAN MASS LOSS IN CANCER PATIENTS].

PubMed

Sánchez Sánchez, Eduardo; Muñoz Alferez, Maria José

2015-10-01

cancer is an important illness in the sanitary field due to phisic and functional consequences involved in it. Among these consequences there is the malnutrition which can cause a loss of lean mass and with it a decrease in the Quality of Life, an increase in hospital stays, social and health costs and so on. The aim of this research is to know which factors can influence in the loss of the lean mass. it is a cross-sectional study in a sample of 72 patients who receive a radiotherapy with curative intent during a period from February 07th and May 14th, 2014. from this pattern Of the total 64 patients were studied, of which 43.7% of the patients presented loss of lean mass, with 21.8% the percentage of patients losing < 2%, 4.7% those with a loss between 2-5% and > 5%, 17.2% of patients. Among the factors studied that can influence the loss of lean mass, only the presence of digestive symptoms have statistical significance (OR = 3.3 or 6.6, as we take as a reference the percentage loss). the aim of the health staff who are working with these patients is to avoid the consequences that accompanies the loss of lean mass. For all this, it is very important to act before the digestive symptoms, by anticipating to them, or early implementation of an individualized nutritional intervention. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Brown-McLean Syndrome in a Pediatric Patient

PubMed Central

Tourkmani, Abdo Karim; Martinez, Jaime D.; Berrones, David; Juárez-Domínguez, Brenda Y.; Beltrán, Francisco; Galor, Anat

2015-01-01

The purpose of this manuscript is to report the case of a 12-year-old patient who presented for routine ophthalmic examination after congenital cataract surgery performed at 2 months of age. The patient was diagnosed with bilateral Brown-McLean syndrome by slit lamp examination. No treatment was required because the patient was asymptomatic and had a clear central cornea. This is the first described case of Brown-McLean syndrome in a pediatric patient, representing the importance of clinical examination in the pediatric age group after cataract surgery because of the risk for patients of developing peripheral edema. PMID:26034485

Brown-McLean Syndrome in a Pediatric Patient.

PubMed

Tourkmani, Abdo Karim; Martinez, Jaime D; Berrones, David; Juárez-Domínguez, Brenda Y; Beltrán, Francisco; Galor, Anat

2015-01-01

The purpose of this manuscript is to report the case of a 12-year-old patient who presented for routine ophthalmic examination after congenital cataract surgery performed at 2 months of age. The patient was diagnosed with bilateral Brown-McLean syndrome by slit lamp examination. No treatment was required because the patient was asymptomatic and had a clear central cornea. This is the first described case of Brown-McLean syndrome in a pediatric patient, representing the importance of clinical examination in the pediatric age group after cataract surgery because of the risk for patients of developing peripheral edema.

[Physical exercise is a help for lean women with polycystic ovary syndrome].

PubMed

Bisgaard, Helene; Dela, Flemming

2017-06-05

Polycystic ovary syndrome (PCOS) affects 12-21% of women in the childbearing age and is the most common cause of hyperandrogenaemia and anovulatory infertility. There is an increase in insulin resistance in both overweight and lean women with PCOS. Exercise treatment is mandatory among the overweight women due to sufficient evidence that it can improve the signs and symptoms of PCOS. This has not been fully investigated among the lean. However, new randomized controlled trials show that structured physical exercise can also improve insulin sensitivity, hyperandrogenaemia and menstrual frequency in lean women with PCOS.

Effect of obesity and exercise on the expression of the novel myokines, Myonectin and Fibronectin type III domain containing 5

PubMed Central

Mart, Ryan; Bond, Cherie E.

2014-01-01

Metabolic dysfunction in skeletal muscle is a major contributor to the development of type 2 diabetes. Endurance exercise training has long been established as an effective means to directly restore skeletal muscle glucose and lipid uptake and metabolism. However, in addition to the direct effects of skeletal muscle on glucose and lipids, there is renewed interest in the ability of skeletal muscle to coordinate metabolic activity of other tissues, such as adipose tissue and liver. The purpose of this study was to examine the effects of endurance exercise on the expression level of two novel muscle-derived secreted factors, or myokines, Myonectin and Fibronectin type III domain containing 5 (FNDC5), the precursor for Irisin. Methods. We performed immunoblot analysis and quantitative real-time PCR analysis of Myonectin and FNDC5 in the diaphragm muscles of obese Zucker rat (OZR) and lean Zucker rat (LZR) with 9 weeks of aerobic training on a motorized treadmill. Results. We show that myonectin gene expression is increased in the OZR model of obesity and decreases with exercise in both lean and obese Zucker rats. Conversely, myonectin protein concentration was elevated with exercise. Similarly, FNDC5 mRNA levels are significantly higher in the OZR, however exercise training had no effect on the expression level of FNDC5 in either the LZR or OZR. We did not observe any difference in muscle protein content of Irisin with obesity or exercise. Conclusion. Our data shows that exercise training does not increase either FNDC5 or myonectin gene expression, indicating that increased transcriptional regulation of these myokines is not induced by exercise. However, our data also indicates a yet to be explored disconnect between myonectin gene expression and protein content. Further, this report highlights the importance of verifying reference genes when completing gene expression analysis. We found that many commonly used reference genes varied significantly by obesity and

Lean and Green Hand Surgery.

PubMed

Van Demark, Robert E; Smith, Vanessa J S; Fiegen, Anthony

2018-02-01

Health care in the United States is both expensive and wasteful. The cost of health care in the United States continues to increase every year. Health care spending for 2016 is estimated at $3.35 trillion. Per capita spending ($10,345 per person) is more than twice the average of other developed countries. The United States also leads the world in solid waste production (624,700 metric tons of waste in 2011). The health care industry is second only to the food industry in annual waste production. Each year, health care facilities in the United States produce 4 billion pounds of waste (660 tons per day), with as much as 70%, or around 2.8 billion pounds, produced directly by operating rooms. Waste disposal also accounts for up to 20% of a hospital's annual environmental services budget. Since 1992, waste production by hospitals has increased annually by a rate of at least 15%, due in part to the increased usage of disposables. Reduction in operating room waste would decrease both health care costs and potential environmental hazards. In 2015, the American Association for Hand Surgery along with the American Society for Surgery of the Hand, American Society for Peripheral Nerve Surgery, and the American Society of Reconstructive Microsurgery began the "Lean and Green" surgery project to reduce the amount of waste generated by hand surgery. We recently began our own "Lean and Green" project in our institution. Using "minor field sterility" surgical principles and Wide Awake Local Anesthesia No Tourniquet (WALANT), both surgical costs and surgical waste were decreased while maintaining patient safety and satisfaction. As the current reimbursement model changes from quantity to quality, "Lean and Green" surgery will play a role in the future health care system. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Calculation of Glucose Dose for Intraperitoneal Glucose Tolerance Tests in Lean and Obese Mice.

PubMed

Jørgensen, Mikkel S; Tornqvist, Kristina S; Hvid, Henning

2017-01-01

Glucose tolerance tests are used frequently in nonclinical research with laboratory animals, for example during characterization of obese phenotypes. Despite published standard operating procedures for glucose tolerance tests in rodents, how glucose doses should be calculated when obese and lean animals are compared is not well documented. Typically the glucose dose is calculated as 2 g/kg body weight, regardless of body composition. With this approach, obese mice receive larger glucose doses than do lean animals, potentially leading to overestimation of glucose intolerance in obese animals. In this study, we performed intraperitoneal glucose tolerance tests in mice with diet-induced obesity and their lean controls, with glucose doses based on either the total body weight or the lean body mass of the animals. To determine glucose tolerance, we determined the blood glucose AUC during the glucose tolerance test. We found that the blood glucose AUC was increased significantly in obese mice compared with lean mice by 75% on average when glucose was dosed according to the lean body mass and by 87% when the glucose dose was calculated according to total body weight. Therefore, mice with diet-induced obesity were approximately equally glucose intolerant between the 2 dose-calculation protocols. However, we recommend calculating the glucose dose according to the lean body mass of the mice, because doing so eliminates the concern regarding overdosing of obese animals.

Comparison of muscle/lean mass measurement methods: correlation with functional and biochemical testing.

PubMed

Buehring, B; Siglinsky, E; Krueger, D; Evans, W; Hellerstein, M; Yamada, Y; Binkley, N

2018-03-01

DXA-measured lean mass is often used to assess muscle mass but has limitations. Thus, we compared DXA lean mass with two novel methods-bioelectric impedance spectroscopy and creatine (methyl-d3) dilution. The examined methodologies did not measure lean mass similarly and the correlation with muscle biomarkers/function varied. Muscle function tests predict adverse health outcomes better than lean mass measurement. This may reflect limitations of current mass measurement methods. Newer approaches, e.g., bioelectric impedance spectroscopy (BIS) and creatine (methyl-d3) dilution (D3-C), may more accurately assess muscle mass. We hypothesized that BIS and D3-C measured muscle mass would better correlate with function and bone/muscle biomarkers than DXA measured lean mass. Evaluations of muscle/lean mass, function, and serum biomarkers were obtained in older community-dwelling adults. Mass was assessed by DXA, BIS, and orally administered D3-C. Grip strength, timed up and go, and jump power were examined. Potential muscle/bone serum biomarkers were measured. Mass measurements were compared with functional and serum data using regression analyses; differences between techniques were determined by paired t tests. Mean (SD) age of the 112 (89F/23M) participants was 80.6 (6.0) years. The lean/muscle mass assessments were correlated (.57-.88) but differed (p < 0.0001) from one another with DXA total body less head being highest at 37.8 (7.3) kg, D3-C muscle mass at 21.1 (4.6) kg, and BIS total body intracellular water at 17.4 (3.5) kg. All mass assessment methods correlated with grip strength and jump power (R = 0.35-0.63, p < 0.0002), but not with gait speed or repeat chair rise. Lean mass measures were unrelated to the serum biomarkers measured. These three methodologies do not similarly measure muscle/lean mass and should not be viewed as being equivalent. Functional tests assessing maximal muscle strength/power (grip strength and jump power) correlated with

Analysis of Load Stress for Asphalt Pavement of Lean Concrete Base

NASA Astrophysics Data System (ADS)

Lijun, Suo; Xinwu, Wang

The study revealed that whether it is early distresses in asphalt pavement or not depends largely on working performance of base. In the field of asphalt pavement, it is widely accepted that lean concrete base, compared with the general semi-rigid base, has better working performance, such as high strength and good eroding resistance. Problem of early distresses in asphalt pavement, which caused by more traffic loadings, can be settled effectively when lean concrete is used in asphalt pavement. Traffic loading is important parameter used in the analysis of the new pavement design. However, few studies have done extensive and intensive research on the load stress for asphalt pavement of lean concrete base. Because of that, it is necessary to study the load stress for the asphalt pavement. In the paper, first of all, three-dimension finite element model of the asphalt pavement is created for the aim of doing mechanical analysis for the asphalt pavement. And then, the two main objectives of this study are investigated. One is analysis for load stress of lean concrete base, and the other is analysis for load stress of asphalt surface. The results show that load stress of lean concrete base decreases, decrease and increase with increase of base's thickness, surface's thickness and ratio of base's modulus to foundation's modulus respectively. So far as the asphalt surface is concerned, maximum shearing stress, which is caused by load, is evident in asphalt surface which is located in transverse contraction joint of lean concrete base of asphalt pavement. Maximum shearing stress decrease, decrease, decrease and increase respectively with increase of the surface's modulus, the surface's thickness, base's thickness and ratio of base's modulus to foundation's modulus.

Lean muscle mass in classic or ovulatory PCOS: association with central obesity and insulin resistance.

PubMed

Mario, F M; do Amarante, F; Toscani, M K; Spritzer, P M

2012-10-01

This age-matched case-control study assessed total and segmental lean muscle mass in classic or ovulatory polycystic ovary syndrome (PCOS) patients and investigated whether lean mass is associated with hormone and metabolic features. Participants underwent anthropometric and clinical evaluation. Habitual physical activity was assessed with a digital pedometer, and body composition by dual-energy X-ray absorptiometry. Laboratory measurements included total cholesterol, cholesterol fractions, triglycerides, glucose, total serum testosterone, serum insulin, estradiol, luteinizing hormone, and SHBG. Energy intake was calculated using a food frequency questionnaire. Classic PCOS patients had higher body mass index (BMI), waist circumference, testosterone and lipid accumulation product values than ovulatory PCOS and controls. Energy consumption, homeostasis model assessment index, SHBG, free androgen index and triglycerides, total and trunk lean mass were higher only in classic PCOS women vs. controls. Arm, leg, trunk, total or limb lean masses were not correlated with hormone levels in any of the groups. However, in PCOS women lipid accumulation product was positively correlated with total (r=0.56, p=0.001), trunk (r=0.59, p=0.001), arm (r=0.54, p=0.001), leg (r=0.44, p=0.03) and limb (r=0.48, p=0.001) lean masses. BMI was positively correlated with all lean mass segments and independently associated with total lean mass. Lipid accumulation product and BMI were independently associated with trunk lean mass variation. The increase in lean mass in classic PCOS appears to be associated with insulin resistance and central obesity rather than with energy intake, physical activity or androgens. © J. A. Barth Verlag in Georg Thieme Verlag KG Stuttgart · New York.

Lean thinking across a hospital: redesigning care at the Flinders Medical Centre.

PubMed

Ben-Tovim, David I; Bassham, Jane E; Bolch, Denise; Martin, Margaret A; Dougherty, Melissa; Szwarcbord, Michael

2007-02-01

Lean thinking is a method for organising complex production processes so as to encourage flow and reduce waste. While the principles of lean thinking were developed in the manufacturing sector, there is increasing interest in its application in health care. This case history documents the introduction and development of Redesigning Care, a lean thinking-based program to redesign care processes across a teaching general hospital. Redesigning Care has produced substantial benefits over the first two-and-a-half years of its implementation, making care both safer and more accessible. Redesigning Care has not been aimed at changing the specifics of clinical practice. Rather, it has been concerned with improving the flow of patients through clinical and other systems. Concepts that emerged in the manufacturing sector have been readily translatable into health care. Lean thinking may play an important role in the reform of health care in Australia and elsewhere.

ZiBuPiYin recipe improves cognitive decline by regulating gut microbiota in Zucker diabetic fatty rats

PubMed Central

Wang, Wang; Xiang, Hong; Xu, Huiying; Liang, Lina; Sui, Hua; Zhan, Libin; Lu, Xiaoguang

2017-01-01

Numerous researches supported that microbiota can influence behavior and modulate cognitive function through “microbiota-gut-brain” axis. Our previous study has demonstrated that ZiBuPiYin recipe (ZBPYR) possesses excellent pharmacological effects against diabetes-associated cognitive decline. To elucidate the role of ZBPYR in regulating the balance of gut microbiota to improve psychological-stress-induced diabetes-associated cognitive decline (PSDACD), we compared blood glucose, behavioral and cognitive functions and diversity of the bacterial community among experimental groups. The Zucker diabetic fatty (ZDF) rats with PSDACD exhibited behavioral and cognitive anomalies showing as increased anxiety- and depression-like behaviors and decreased learning and memory abilities. High-throughput sequencing of the bacterial 16S rRNA gene revealed that Roseburia and Coprococcus were decreased in ZDF rats with PSDACD compared with control group. Notably, these changes were reversed by ZBPYR treatment. Our findings indicate that ZBPYR might prevent PSDACD by maintaining the compositions of gut microbiota, which could be developed as a new therapy for T2D with PSDACD. PMID:28099913

ZiBuPiYin recipe improves cognitive decline by regulating gut microbiota in Zucker diabetic fatty rats.

PubMed

Gu, Chunyan; Zhou, Wen; Wang, Wang; Xiang, Hong; Xu, Huiying; Liang, Lina; Sui, Hua; Zhan, Libin; Lu, Xiaoguang

2017-04-25

Numerous researches supported that microbiota can influence behavior and modulate cognitive function through "microbiota-gut-brain" axis. Our previous study has demonstrated that ZiBuPiYin recipe (ZBPYR) possesses excellent pharmacological effects against diabetes-associated cognitive decline. To elucidate the role of ZBPYR in regulating the balance of gut microbiota to improve psychological-stress-induced diabetes-associated cognitive decline (PSDACD), we compared blood glucose, behavioral and cognitive functions and diversity of the bacterial community among experimental groups. The Zucker diabetic fatty (ZDF) rats with PSDACD exhibited behavioral and cognitive anomalies showing as increased anxiety- and depression-like behaviors and decreased learning and memory abilities. High-throughput sequencing of the bacterial 16S rRNA gene revealed that Roseburia and Coprococcus were decreased in ZDF rats with PSDACD compared with control group. Notably, these changes were reversed by ZBPYR treatment. Our findings indicate that ZBPYR might prevent PSDACD by maintaining the compositions of gut microbiota, which could be developed as a new therapy for T2D with PSDACD.

Fetuin-A levels in lean and obese women with polycystic ovary syndrome.

PubMed

Kozakowski, Jarosław; Jeske, Wojciech; Zgliczyński, Wojciech

2014-01-01

The aim of this study was to estimate serum fetuin-A levels in lean and obese women with polycystic ovary syndrome (PCOS) and to find possible relationships between fetuin-A, metabolic factors and androgens in these patients. In 25 lean (18-38 years, BMI 17.5-25.0 kg/m2) and 15 obese women (20-41 years, BMI 28.1-53.2 kg/m2) with PCOS, anthropometric indices and body composition were measured. Fasting serum fetuin-A, adiponectin, leptin, glucose, lipids, hsCRP, insulin, androgens and SHGB levels were estimated. There was no significant difference in serum fetuin-A levels between lean and obese patients: 0.54 ± 0.13 g/L and 0.60 ± 0.14 g/L, respectively. We noted a correlation between BMI and leptin levels (r = 0.88; p < 0.0001) and a nearly significant negative correlation between BMI and adiponectin levels (r = -0.53; p = 0.11) in all subjects. In lean patients, we found a correlation between fetuin-A levels and ALT activity (r = 0.44; p < 0.05). In all participants, fetuin-A correlated directly with DHEA-S levels (r = 0.44; p < 0.03). Serum fetuin-A levels were similar in lean and obese women with PCOS. We found an association between fetuin-A levels and ALT activity in lean patients and between fetuin-A levels and DHEA-S in all women. The role of fetuin-A in the mechanisms of insulin resistance, and its potential impact on androgenic hormones production in women with PCOS, need to be tested in further studies.

Multiorgan insulin sensitivity in lean and obese subjects.

PubMed

Conte, Caterina; Fabbrini, Elisa; Kars, Marleen; Mittendorfer, Bettina; Patterson, Bruce W; Klein, Samuel

2012-06-01

To provide a comprehensive assessment of multiorgan insulin sensitivity in lean and obese subjects with normal glucose tolerance. The hyperinsulinemic-euglycemic clamp procedure with stable isotopically labeled tracer infusions was performed in 40 obese (BMI 36.2 ± 0.6 kg/m(2), mean ± SEM) and 26 lean (22.5 ± 0.3 kg/m(2)) subjects with normal glucose tolerance. Insulin was infused at different rates to achieve low, medium, and high physiological plasma concentrations. In obese subjects, palmitate and glucose R(a) in plasma decreased with increasing plasma insulin concentrations. The decrease in endogenous glucose R(a) was greater during low-, medium-, and high-dose insulin infusions (69 ± 2, 74 ± 2, and 90 ± 2%) than the suppression of palmitate R(a) (52 ± 4, 68 ± 1, and 79 ± 1%). Insulin-mediated increase in glucose disposal ranged from 24 ± 5% at low to 253 ± 19% at high physiological insulin concentrations. The suppression of palmitate R(a) and glucose R(a) were greater in lean than obese subjects during low-dose insulin infusion but were the same in both groups during high-dose insulin infusion, whereas stimulation of glucose R(d) was greater in lean than obese subjects across the entire physiological range of plasma insulin. Endogenous glucose production and adipose tissue lipolytic rate are both very sensitive to small increases in circulating insulin, whereas stimulation of muscle glucose uptake is minimal until high physiological plasma insulin concentrations are reached. Hyperinsulinemia within the normal physiological range can compensate for both liver and adipose tissue insulin resistance, but not skeletal muscle insulin resistance, in obese people who have normal glucose tolerance.

Fat and Lean Masses in Youths with Down Syndrome: Gender Differences

ERIC Educational Resources Information Center

Gonzalez-Aguero, Alejandro; Ara, Ignacio; Moreno, Luis A.; Vicente-Rodriguez, German; Casajus, Jose A.

2011-01-01

The present study aimed at comparing fat and lean masses between children and adolescents with and without Down syndrome (DS) and evaluating the presence of sexual dimorphism. Total and regional fat and lean masses were assessed by dual energy X-ray absorptiometry (DXA) and the percentage of body fat (%BF) by air-displacement plethysmography (ADP)…

Virtual modelling of components of a production system as the tool of lean engineering

NASA Astrophysics Data System (ADS)

Monica, Z.

2015-11-01

Between the most effective techniques of manufacturing management is considered the Lean Engineering. The term “lean engineering” was created by Japanese manufacturers. The high efficiency of this method resulted in a meaningful growth in concern in the philosophy of Lean among European companies, and consequently the use of its European markets. Lean philosophy is an approach to manufacturing to minimize the use of all resources, including time. These are resources that are used in the company for a variety of activities. This implies, first identify and then eliminate activities which does not generate added value in the field of design, manufacturing, supply chain management, and customer relations. The producers of these principles not only employ teams multi-professional employees at all levels of the organization, but also use a more automated machines to produce large quantities of products with a high degree of diversity. Lean Engineering is to use a number of principles and practical guidelines that allow you to reduce costs by eliminating absolute extravagance, and also simplification of all manufacturing processes and maintenance. Nowadays it could be applied the powerful engineering programs to realize the concept of Lean Engineering. They could be described using the term CAD/CAM/CAE. They consist of completely different packages for both the design of elements, as well process design. Their common feature is generally considered with their application area. They are used for computer programs assisting the design, development and manufacturing phases of a manufacturing process. The idea of the presented work is to use the Siemens NX software for aiding the process of Lean Engineering system creating. The investigated system is a robotized workcell. In the NX system are created the components of the designed workcell such as machine tools, as industrial robot, as conveyors and buffers. The system let to functionally link these components to

Insulin-induced capillary recruitment is impaired in both lean and obese women with PCOS.

PubMed

Ketel, I J G; Serné, E H; Ijzerman, R G; Korsen, T J M; Twisk, J W; Hompes, P G A; Smulders, Y M; Homburg, R; Vorstermans, L; Stehouwer, C D A; Lambalk, C B

2011-11-01

Insulin resistance, i.e. impaired insulin-mediated glucose uptake (IMGU), is a major risk factor for type 2 diabetes in women with polycystic ovary syndrome (PCOS). Insulin-induced capillary recruitment (IICR) is considered a significant determinant of IMGU. We investigated whether IICR is a determinant IMGU in obese and lean women with and without PCOS. The study included 36 women with PCOS (20 lean, BMI 21.9 ± 2.3 kg/m(2) and 16 obese, BMI 35.9 ± 6.0 kg/m(2)) and 27 age-matched healthy controls (14 lean, BMI 22.2 ± 1.8 kg/m(2) and 13 obese, BMI 40.5 ± 7.0 kg/m(2)). IICR was evaluated by capillary microscopy during an isoglycemic-hyperinsulinemic clamp. IMGU was expressed as M/I value. The M/I value was significantly lower in obese PCOS women compared with obese controls [0.5 (0.2-1.1) versus 0.8 (0.3-1.4) (mg kg(-1) min(-1) pmol l(-1)) × 100, P < 0.01], whereas the small difference between lean PCOS and lean control women was non-significant [1.5 (0.5-2.6) versus 1.7 (1.0-3.7) (mg kg(-1) min(-1) pmol l(-1)) × 100, P = 0.17]. Hyperinsulinemia increased capillary recruitment in lean controls (53.5 ± 20.3 versus 64.9 ± 27.4 n/mm(2), P < 0.05), but not in either PCOS group nor in obese controls. IICR and androgens were a determinant of M/I value only in lean women with or without PCOS. PCOS per se is associated with impaired IICR. Obese women with PCOS, in part independent of obesity, demonstrated a profound insulin resistance, whereas the difference between lean PCOS women and healthy controls was small and statistically non-significant. IICR was a determinant of IMGU in lean, but not in obese, women regardless of the presence of PCOS.

Lean methodology improves efficiency in outpatient academic uro-oncology clinics.

PubMed

Skeldon, Sean C; Simmons, Andrea; Hersey, Karen; Finelli, Antonio; Jewett, Michael A; Zlotta, Alexandre R; Fleshner, Neil E

2014-05-01

To determine if lean methodology, an industrial engineering tool developed to optimize manufacturing efficiency, can successfully be applied to improve efficiencies and quality of care in a hospital-based high-volume uro-oncology clinic. Before the lean initiative, baseline data were collected on patient volumes, wait times, cycle times (patient arrival to discharge), nursing assessment time, patient teaching, and physician ergonomics (via spaghetti diagram). Value stream analysis and a rapid improvement event were carried out, and significant changes were made to patient check-in, work areas, and nursing face time. Follow-up data were obtained at 30, 60, and 90 days. The Student t test was used for analysis to compare performance metrics with baseline. The median cycle time before the lean initiative was 46 minutes. This remained stable at 46 minutes at 30 days but improved to 35 minutes at 60 days and 41 minutes at 90 days. Shorter wait times allowed for increased nursing and physician face time. The average length of the physician assessment increased from 7.5 minutes at baseline to 10.6 minutes at 90 days. The average proportion of value-added time compared with the entire clinic visit increased from 30.6% at baseline to 66.3% at 90 days. Using lean methodology, we were able to shorten the patient cycle time and the time to initial assessment as well as integrate both an initial registered nurse assessment and registered nurse teaching to each visit. Lean methodology can effectively be applied to improve efficiency and patient care in an academic outpatient uro-oncology clinic setting. Copyright © 2014 Elsevier Inc. All rights reserved.

Improving a Dental School's Clinic Operations Using Lean Process Improvement.

PubMed

Robinson, Fonda G; Cunningham, Larry L; Turner, Sharon P; Lindroth, John; Ray, Deborah; Khan, Talib; Yates, Audrey

2016-10-01

The term "lean production," also known as "Lean," describes a process of operations management pioneered at the Toyota Motor Company that contributed significantly to the success of the company. Although developed by Toyota, the Lean process has been implemented at many other organizations, including those in health care, and should be considered by dental schools in evaluating their clinical operations. Lean combines engineering principles with operations management and improvement tools to optimize business and operating processes. One of the core concepts is relentless elimination of waste (non-value-added components of a process). Another key concept is utilization of individuals closest to the actual work to analyze and improve the process. When the medical center of the University of Kentucky adopted the Lean process for improving clinical operations, members of the College of Dentistry trained in the process applied the techniques to improve inefficient operations at the Walk-In Dental Clinic. The purpose of this project was to reduce patients' average in-the-door-to-out-the-door time from over four hours to three hours within 90 days. Achievement of this goal was realized by streamlining patient flow and strategically relocating key phases of the process. This initiative resulted in patient benefits such as shortening average in-the-door-to-out-the-door time by over an hour, improving satisfaction by 21%, and reducing negative comments by 24%, as well as providing opportunity to implement the electronic health record, improving teamwork, and enhancing educational experiences for students. These benefits were achieved while maintaining high-quality patient care with zero adverse outcomes during and two years following the process improvement project.

A Hybrid Fuzzy Model for Lean Product Development Performance Measurement

NASA Astrophysics Data System (ADS)

Osezua Aikhuele, Daniel; Mohd Turan, Faiz

2016-02-01

In the effort for manufacturing companies to meet up with the emerging consumer demands for mass customized products, many are turning to the application of lean in their product development process, and this is gradually moving from being a competitive advantage to a necessity. However, due to lack of clear understanding of the lean performance measurements, many of these companies are unable to implement and fully integrated the lean principle into their product development process. Extensive literature shows that only few studies have focus systematically on the lean product development performance (LPDP) evaluation. In order to fill this gap, the study therefore proposed a novel hybrid model based on Fuzzy Reasoning Approach (FRA), and the extension of Fuzzy-AHP and Fuzzy-TOPSIS methods for the assessment of the LPDP. Unlike the existing methods, the model considers the importance weight of each of the decision makers (Experts) since the performance criteria/attributes are required to be rated, and these experts have different level of expertise. The rating is done using a new fuzzy Likert rating scale (membership-scale) which is designed such that it can address problems resulting from information lost/distortion due to closed-form scaling and the ordinal nature of the existing Likert scale.

Overweight adult cats have significantly lower voluntary physical activity than adult lean cats.

PubMed

de Godoy, Maria Rc; Shoveller, Anna K

2017-12-01

Objectives The objectives of the current pilot study were to evaluate whether body condition score (BCS) and body weight are significantly related to physical activity counts, and to evaluate potential interaction between BCS and voluntary physical activity measured over a 14 day period. Methods Ten (five lean, five overweight), neutered, adult American Shorthair cats were selected for this study (median age 4 ± 0.5 years). Cats with a BCS of ⩽3.0 were considered lean, whereas cats with a BCS >3.0 were considered overweight, using a 5-point scale. Cats were housed in a free-living environment with indoor/outdoor access and were individually fed once daily a commercially available dry extruded diet and allowed 1 h to eat. Voluntary physical activity was measured consecutively for 14 days using the Actical Activity Monitors that were worn parallel to the ribs and attached via a harness. Results Lean cats had a greater mean total daily voluntary physical activity ( P = 0.0059), and a greater voluntary physical activity during light ( P = 0.0023) and dark ( P = 0.0446) periods, with overweight cats having 60% of the physical activity of lean cats. Lean cats were more active before feeding and during animal care procedures. These data suggest that lean cats have a greater anticipatory physical activity prior to feeding and are more eager to have social interaction with humans than overweight cats. A significant interaction was observed between day of physical activity measurement and BCS for total daily voluntary physical activity ( P = 0.0133) and activity during the light period ( P = 0.0016) where lean cats were consistently more active than overweight cats. In general, cats were more active during weekdays vs weekends. Conclusions and relevance The results of this study suggest that overweight cats are less active than lean cats and that voluntary physical activity level appears to be influenced by social interaction with humans.

Development of a bedside viable ultrasound protocol to quantify appendicular lean tissue mass

PubMed Central

Paris, Michael T.; Lafleur, Benoit; Dubin, Joel A.

2017-01-01

Abstract Background Ultrasound is a non‐invasive and readily available tool that can be prospectively applied at the bedside to assess muscle mass in clinical settings. The four‐site protocol, which images two anatomical sites on each quadriceps, may be a viable bedside method, but its ability to predict musculature has not been compared against whole‐body reference methods. Our primary objectives were to (i) compare the four‐site protocol's ability to predict appendicular lean tissue mass from dual‐energy X‐ray absorptiometry; (ii) optimize the predictability of the four‐site protocol with additional anatomical muscle thicknesses and easily obtained covariates; and (iii) assess the ability of the optimized protocol to identify individuals with low lean tissue mass. Methods This observational cross‐sectional study recruited 96 university and community dwelling adults. Participants underwent ultrasound scans for assessment of muscle thickness and whole‐body dual‐energy X‐ray absorptiometry scans for assessment of appendicular lean tissue. Ultrasound protocols included (i) the nine‐site protocol, which images nine anterior and posterior muscle groups in supine and prone positions, and (ii) the four‐site protocol, which images two anterior sites on each quadriceps muscle group in a supine position. Results The four‐site protocol was strongly associated (R 2 = 0.72) with appendicular lean tissue mass, but Bland–Altman analysis displayed wide limits of agreement (−5.67, 5.67 kg). Incorporating the anterior upper arm muscle thickness, and covariates age and sex, alongside the four‐site protocol, improved the association (R 2 = 0.91) with appendicular lean tissue and displayed narrower limits of agreement (−3.18, 3.18 kg). The optimized protocol demonstrated a strong ability to identify low lean tissue mass (area under the curve = 0.89). Conclusions The four‐site protocol can be improved with the addition of the anterior upper

Antihypertensive effect of alpha- and beta-adrenergic blockade in obese and lean hypertensive subjects.

PubMed

Wofford, M R; Anderson, D C; Brown, C A; Jones, D W; Miller, M E; Hall, J E

2001-07-01

The purpose of this study was to determine the contribution of the adrenergic system in mediating hypertension in obese and lean patients. Thirteen obese, hypertensive patients with a body mass index (BMI) > or =28 kg/m2 (obese) and nine lean patients with a BMI < or =25 kg/m2 (lean) were recruited. After a 1-week washout period, participants underwent daytime ambulatory blood pressure monitoring (ABPM). Participants were then treated with the alpha-adrenergic antagonist doxazosin, titrating to 4 mg QHS in 1 week. In the next week, the beta-adrenergic antagonist atenolol was added at an initial dose of 25 mg/day and titrated to 50 mg/day within 1 week. One month after the addition of atenolol, all patients underwent a second ABPM session. There were no differences between the obese and lean subjects in baseline systolic (SBP), diastolic (DBP), or mean arterial pressures (MAP) measured by office recording or ABPM. However, obese subjects had higher heart rates than lean subjects (87.5+/-2.4 v 76.8+/-4.9 beats/min). After 1 month of treatment with the adrenergic blockers, obese patients had a significantly lower SBP (130.0+/-2.5 v 138.9+/-2.1 mm Hg, P = .02) and MAP (99.6+/-2.3 v 107.0+/-1.5 mm Hg, P = .02) than lean patients. Obese patients also tended to have a lower DBP than lean patients (84.3+/-2.5 v 90.9+/-1.6 mm Hg, P = .057), but there was no significant difference in heart rate after 1 month of adrenergic blockade. These results indicate that blood pressure is more sensitive to adrenergic blockade in obese than in lean hypertensive patients and suggest that increased sympathetic activity may be an important factor in the maintenance of hypertension in obesity.

Cutpoints for Low Appendicular Lean Mass That Identify Older Adults With Clinically Significant Weakness

PubMed Central

Peters, Katherine W.; Shardell, Michelle D.; McLean, Robert R.; Dam, Thuy-Tien L.; Kenny, Anne M.; Fragala, Maren S.; Harris, Tamara B.; Kiel, Douglas P.; Guralnik, Jack M.; Ferrucci, Luigi; Kritchevsky, Stephen B.; Vassileva, Maria T.; Studenski, Stephanie A.; Alley, Dawn E.

2014-01-01

Background. Low lean mass is potentially clinically important in older persons, but criteria have not been empirically validated. As part of the FNIH (Foundation for the National Institutes of Health) Sarcopenia Project, this analysis sought to identify cutpoints in lean mass by dual-energy x-ray absorptiometry that discriminate the presence or absence of weakness (defined in a previous report in the series as grip strength <26kg in men and <16kg in women). Methods. In pooled cross-sectional data stratified by sex (7,582 men and 3,688 women), classification and regression tree (CART) analysis was used to derive cutpoints for appendicular lean body mass (ALM) that best discriminated the presence or absence of weakness. Mixed-effects logistic regression was used to quantify the strength of the association between lean mass category and weakness. Results. In primary analyses, CART models identified cutpoints for low lean mass (ALM <19.75kg in men and <15.02kg in women). Sensitivity analyses using ALM divided by body mass index (BMI: ALMBMI) identified a secondary definition (ALMBMI <0.789 in men and ALMBMI <0.512 in women). As expected, after accounting for study and age, low lean mass (compared with higher lean mass) was associated with weakness by both the primary (men, odds ratio [OR]: 6.9 [95% CI: 5.4, 8.9]; women, OR: 3.6 [95% CI: 2.9, 4.3]) and secondary definitions (men, OR: 4.3 [95% CI: 3.4, 5.5]; women, OR: 2.2 [95% CI: 1.8, 2.8]). Conclusions. ALM cutpoints derived from a large, diverse sample of older adults identified lean mass thresholds below which older adults had a higher likelihood of weakness. PMID:24737559

Leadership requirements for Lean versus servant leadership in health care: a systematic review of the literature.

PubMed

Aij, Kjeld Harald; Rapsaniotis, Sofia

2017-01-01

As health care organizations face pressures to improve quality and efficiency while reducing costs, leaders are adopting management techniques and tools used in manufacturing and other industries, especially Lean. Successful Lean leaders appear to use a coaching leadership style that shares underlying principles with servant leadership. There is little information about specific similarities and differences between Lean and servant leaderships. We systematically reviewed the literature on Lean leadership, servant leadership, and health care and performed a comparative analysis of attributes using Russell and Stone's leadership framework. We found significant overlap between the two leadership styles, although there were notable differences in origins, philosophy, characteristics and behaviors, and tools. We conclude that both Lean and servant leaderships are promising models that can contribute to the delivery of patient-centered, high-value care. Servant leadership may provide the means to engage and develop employees to become successful Lean leaders in health care organizations.

Lean thinking in health and nursing: an integrative literature review.

PubMed

Magalhães, Aline Lima Pestana; Erdmann, Alacoque Lorenzini; Silva, Elza Lima da; Santos, José Luís Guedes Dos

2016-08-08

to demonstrate the scientific knowledge developed on lean thinking in health, highlighting the impact and contributions in health care and nursing. an integrative literature review in the PubMed, CINAHL, Scopus, Web of Science, Emerald, LILACS and SciELO electronic library databases, from 2006 to 2014, with syntax keywords for each data base, in which 47 articles were selected for analysis. the categories were developed from the quality triad proposed by Donabedian: structure, process and outcome. Lean thinking is on the rise in health surveys, particularly internationally, especially in the USA and UK, improving the structure, process and outcome of care and management actions. However, it is an emerging theme in nursing. this study showed that the use of lean thinking in the context of health has a transforming effect on care and organizational aspects, promoting advantages in terms of quality, safety and efficiency of health care and nursing focused on the patient. evidenciar o conhecimento científico desenvolvido sobre pensamento Lean na área da saúde, destacando o impacto e as contribuições no cuidado em saúde e enfermagem. revisão integrativa da literatura a partir das bases de dados PubMed, CINAHL, Scopus, Web of Science, Emerald, LILACS e na biblioteca eletrônica SciELO, de 2006 a 2014, com sintaxe de palavras-chaves para cada base, selecionados 47 artigos para análise. as categorias foram elaboradas a partir da tríade de qualidade proposta por Donabedian: estrutura, processo e resultado. O pensamento Lean está em ascensão nas pesquisas sobre saúde, principalmente no âmbito internacional, com destaque para os Estados Unidos e Reino Unido, melhorando a estrutura, o processo e o resultado a partir das ações assistenciais e gerenciais. Porém, é uma temática incipiente na enfermagem. por meio desse estudo observou-se que a utilização do pensamento Lean, no contexto da saúde, tem um efeito transformador nos aspectos assistenciais e

A Systematic Approach to Applying Lean Techniques to Optimize an Office Process at the Y-12 National Security Complex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Credille, Jennifer; Owens, Elizabeth

This capstone offers the introduction of Lean concepts to an office activity to demonstrate the versatility of Lean. Traditionally Lean has been associated with process improvements as applied to an industrial atmosphere. However, this paper will demonstrate that implementing Lean concepts within an office activity can result in significant process improvements. Lean first emerged with the conception of the Toyota Production System. This innovative concept was designed to improve productivity in the automotive industry by eliminating waste and variation. Lean has also been applied to office environments, however the limited literature reveals most Lean techniques within an office are restrictedmore » to one or two techniques. Our capstone confronts these restrictions by introducing a systematic approach that utilizes multiple Lean concepts. The approach incorporates: system analysis, system reliability, system requirements, and system feasibility. The methodical Lean outline provides tools for a successful outcome, which ensures the process is thoroughly dissected and can be achieved for any process in any work environment.« less

Obesity And Laboratory Diets Affects Tissue Malondialdehyde (MDA) Levels In Obese Rats

NASA Astrophysics Data System (ADS)

Chowdhury, Parimal; Scott, Joseph; Holley, Andy; Hakkak, Reza

2010-04-01

This study was conducted to investigate the interaction of obesity and laboratory diets on tissue malondialdehyde levels in rats. Female Zucker obese and lean rats were maintained on either regular grain-based diet or purified casein diet for two weeks, orally gavaged at day 50 with 65 mg/kg DMBA and sacrificed 24 hrs later. Malondialdehyde (MDA) levels were measured in blood and harvested tissues. Data were recorded as mean ± SEM and analyzed statistically. Results show that the obese group on purified casein diet had reduction of MDA levels in the brain, duodenum, liver, lung and kidney tissues as compared to lean group, p <0.05. Obese group on grain-based diet showed significant increase in MDA levels only in the duodenum, p <0.05. We conclude that dietary intervention differentially affects the oxidative markers in obese rats. It appears that purified casein diets were more effective than grain-based diet in reduction of oxidative stress in obese rats.

Dietary fish protein hydrolysates containing bioactive motifs affect serum and adipose tissue fatty acid compositions, serum lipids, postprandial glucose regulation and growth in obese Zucker fa/fa rats.

PubMed

Drotningsvik, Aslaug; Mjøs, Svein A; Pampanin, Daniela M; Slizyte, Rasa; Carvajal, Ana; Remman, Tore; Høgøy, Ingmar; Gudbrandsen, Oddrun A

2016-10-01

The world's fisheries and aquaculture industries produce vast amounts of protein-containing by-products that can be enzymatically hydrolysed to smaller peptides and possibly be used as additives to functional foods and nutraceuticals targeted for patients with obesity-related metabolic disorders. To investigate the effects of fish protein hydrolysates on markers of metabolic disorders, obese Zucker fa/fa rats consumed diets with 75 % of protein from casein/whey (CAS) and 25 % from herring (HER) or salmon (SAL) protein hydrolysate from rest raw material, or 100 % protein from CAS for 4 weeks. The fatty acid compositions were similar in the experimental diets, and none of them contained any long-chain n-3 PUFA. Ratios of lysine:arginine and methionine:glycine were lower in HER and SAL diets when compared with CAS, and taurine was detected only in fish protein hydrolysate diets. Motifs with reported hypocholesterolemic or antidiabetic activities were identified in both fish protein hydrolysates. Rats fed HER diet had lower serum HDL-cholesterol and LDL-cholesterol, and higher serum TAG, MUFA and n-3:n-6 PUFA ratio compared with CAS-fed rats. SAL rats gained more weight and had better postprandial glucose regulation compared with CAS rats. Serum lipids and fatty acids were only marginally affected by SAL, but adipose tissue contained less total SFA and more total n-3 PUFA when compared with CAS. To conclude, diets containing hydrolysed rest raw material from herring or salmon proteins may affect growth, lipid metabolism, postprandial glucose regulation and fatty acid composition in serum and adipose tissue in obese Zucker rats.

Network model of project "Lean Production"

NASA Astrophysics Data System (ADS)

Khisamova, E. D.

2018-05-01

Economical production implies primarily new approaches to culture of management and organization of production and offers a set of tools and techniques that allows reducing losses significantly and making the process cheaper and faster. Economical production tools are simple solutions that allow one to see opportunities for improvement of all aspects of the business, to reduce losses significantly, to constantly improve the whole spectrum of business processes, to increase significantly the transparency and manageability of the organization, to take advantage of the potential of each employee of the company, to increase competitiveness, and to obtain significant economic benefits without making large financial expenditures. Each of economical production tools solves a specific part of the problems, and only application of their combination will allow one to solve the problem or minimize it to acceptable values. The research of the governance process project "Lean Production" permitted studying the methods and tools of lean production and developing measures for their improvement.

Comparison of the intervertebral disc spaces between axial and anterior lean cervical traction.

PubMed

Chung, Chin-Teng; Tsai, Sen-Wei; Chen, Chun-Jung; Wu, Ting-Chung; Wang, David; Lan, Haw-Chang H; Wu, Shyi-Kuen

2009-11-01

The insufficient investigations on the changes of spinal structures during traction prevent further exploring the possible therapeutic mechanism of cervical traction. A blind randomized crossover-design study was conducted to quantitatively compare the intervertebral disc spaces between axial and anterior lean cervical traction in sitting position. A total of 96 radiographic images from the baseline measurements, axial and anterior lean tractions in 32 asymptomatic subjects were digitized for further analysis. The intra- and inter-examiner reliabilities for measuring the intervertebral disc spaces were in good ranges (ICCs = 0.928-0.942). With the application of anterior lean traction, the statistical increases were detected both in anterior and in posterior disc spaces compared to the baseline (0.29 mm and 0.24 mm; both P < 0.01) and axial traction (0.16 mm and 0.35 mm; both P < 0.01). The greater intervertebral disc spaces obtained during anterior lean traction might be associated with the more even distribution of traction forces over the anterior and posterior neck structures. The neck extension moment through mandible that generally occurred in the axial traction could be counteracted by the downward force of head weight during anterior lean traction. This study quantitatively demonstrated that anterior lean traction in sitting position provided more intervertebral disc space enlargements in both anterior and posterior aspects than axial traction did. These findings may serve as a therapeutic reference when cervical traction is suggested.

The Applicability of Lean and Six Sigma Techniques to Clinical and Translational Research

PubMed Central

Schweikhart, Sharon A.; Dembe, Allard E

2010-01-01

Background Lean and Six Sigma are business management strategies commonly used in production industries to improve process efficiency and quality. During the past decade, these process improvement techniques increasingly have been applied outside of the manufacturing sector, for example, in health care and in software development. This article concerns the potential use of Lean and Six Sigma to improve the processes involved in clinical and translational research. Improving quality, avoiding delays and errors, and speeding up the time to implementation of biomedical discoveries are prime objectives of the NIH Roadmap for Biomedical Research and the NIH Clinical and Translational Science Award (CTSA) program. Methods This article presents a description of the main principles, practices, and methodologies used in Lean and Six Sigma. Available literature involving applications of Lean and Six Sigma to health care, laboratory science, and clinical and translational research is reviewed. Specific issues concerning the use of these techniques in different phases of translational research are identified. Results Examples are provided of Lean and Six Sigma applications that are being planned at a current CTSA site, which could potentially be replicated elsewhere. We describe how different process improvement approaches are best adapted for particularly translational research phases. Conclusions Lean and Six Sigma process improvement methodologies are well suited to help achieve NIH’s goal of making clinical and translational research more efficient and cost-effective, enhancing the quality of the research, and facilitating the successful adoption of biomedical research findings into practice. PMID:19730130

The applicability of Lean and Six Sigma techniques to clinical and translational research.

PubMed

Schweikhart, Sharon A; Dembe, Allard E

2009-10-01

Lean and Six Sigma are business management strategies commonly used in production industries to improve process efficiency and quality. During the past decade, these process improvement techniques increasingly have been applied outside the manufacturing sector, for example, in health care and in software development. This article concerns the potential use of Lean and Six Sigma in improving the processes involved in clinical and translational research. Improving quality, avoiding delays and errors, and speeding up the time to implementation of biomedical discoveries are prime objectives of the National Institutes of Health (NIH) Roadmap for Medical Research and the NIH's Clinical and Translational Science Award program. This article presents a description of the main principles, practices, and methods used in Lean and Six Sigma. Available literature involving applications of Lean and Six Sigma to health care, laboratory science, and clinical and translational research is reviewed. Specific issues concerning the use of these techniques in different phases of translational research are identified. Examples of Lean and Six Sigma applications that are being planned at a current Clinical and Translational Science Award site are provided, which could potentially be replicated elsewhere. We describe how different process improvement approaches are best adapted for particular translational research phases. Lean and Six Sigma process improvement methods are well suited to help achieve NIH's goal of making clinical and translational research more efficient and cost-effective, enhancing the quality of the research, and facilitating the successful adoption of biomedical research findings into practice.

Interactions between lean management and the psychosocial work environment in a hospital setting - a multi-method study.

PubMed

Ulhassan, Waqar; von Thiele Schwarz, Ulrica; Thor, Johan; Westerlund, Hugo

2014-10-22

As health care struggles to meet increasing demands with limited resources, Lean has become a popular management approach. It has mainly been studied in relation to health care performance. The empirical evidence as to how Lean affects the psychosocial work environment has been contradictory. This study aims to study the interaction between Lean and the psychosocial work environment using a comprehensive model that takes Lean implementation information, as well as Lean theory and the particular context into consideration. The psychosocial work environment was measured twice with the Copenhagen Psychosocial Questionnaire (COPSOQ) employee survey during Lean implementations on May-June 2010 (T1) (n = 129) and November-December 2011 (T2) (n = 131) at three units (an Emergency Department (ED), Ward-I and Ward-II). Information based on qualitative data analysis of the Lean implementations and context from a previous paper was used to predict expected change patterns in the psychosocial work environment from T1 to T2 and subsequently compared with COPSOQ-data through linear regression analysis. Between T1 and T2, qualitative information showed a well-organized and steady Lean implementation on Ward-I with active employee participation, a partial Lean implementation on Ward-II with employees not seeing a clear need for such an intervention, and deterioration in already implemented Lean activities at ED, due to the declining interest of top management. Quantitative data analysis showed a significant relation between the expected and actual results regarding changes in the psychosocial work environment. Ward-I showed major improvements especially related to job control and social support, ED showed a major decline with some exceptions while Ward-II also showed improvements similar to Ward-I. The results suggest that Lean may have a positive impact on the psychosocial work environment given that it is properly implemented. Also, the psychosocial work environment may even

Heat production and body temperature during cooling and rewarming in overweight and lean men.

PubMed

Claessens-van Ooijen, Anne M J; Westerterp, Klaas R; Wouters, Loek; Schoffelen, Paul F M; van Steenhoven, Anton A; van Marken Lichtenbelt, Wouter D

2006-11-01

To compare overweight and lean subjects with respect to thermogenesis and physiological insulation in response to mild cold and rewarming. Ten overweight men (mean BMI, 29.2 +/- 2.8 kg/m(2)) and 10 lean men (mean BMI, 21.1 +/- 2.0 kg/m(2)) were exposed to cold air for 1 hour, followed by 1 hour of rewarming. Body composition was determined by hydrodensitometry and deuterium dilution. Heat production and body temperatures were measured continuously by indirect calorimetry and thermistors, respectively. Muscle activity was recorded using electromyography. In both groups, heat production increased significantly during cooling (lean, p = 0.004; overweight, p = 0.006). The increase was larger in the lean group compared with the overweight group (p = 0.04). During rewarming, heat production returned to baseline in the overweight group and stayed higher compared with baseline in the lean group (p = 0.003). The difference in heat production between rewarming and baseline was larger in the lean (p = 0.01) than in the overweight subjects. Weighted body temperature of both groups decreased during cold exposure (lean, p = 0.002; overweight, p < 0.001) and did not return to baseline during rewarming. Overweight subjects showed a blunted mild cold-induced thermogenesis. The insulative cold response was not different among the groups. The energy-efficient response of the overweight subjects can have consequences for energy balance in the long term. The results support the concept of a dynamic heat regulation model instead of temperature regulation around a fixed set point.

Leadership requirements for Lean versus servant leadership in health care: a systematic review of the literature

PubMed Central

Aij, Kjeld Harald; Rapsaniotis, Sofia

2017-01-01

As health care organizations face pressures to improve quality and efficiency while reducing costs, leaders are adopting management techniques and tools used in manufacturing and other industries, especially Lean. Successful Lean leaders appear to use a coaching leadership style that shares underlying principles with servant leadership. There is little information about specific similarities and differences between Lean and servant leaderships. We systematically reviewed the literature on Lean leadership, servant leadership, and health care and performed a comparative analysis of attributes using Russell and Stone’s leadership framework. We found significant overlap between the two leadership styles, although there were notable differences in origins, philosophy, characteristics and behaviors, and tools. We conclude that both Lean and servant leaderships are promising models that can contribute to the delivery of patient-centered, high-value care. Servant leadership may provide the means to engage and develop employees to become successful Lean leaders in health care organizations. PMID:29355240

Method for automatically evaluating a transition from a batch manufacturing technique to a lean manufacturing technique

DOEpatents

Ivezic, Nenad; Potok, Thomas E.

2003-09-30

A method for automatically evaluating a manufacturing technique comprises the steps of: receiving from a user manufacturing process step parameters characterizing a manufacturing process; accepting from the user a selection for an analysis of a particular lean manufacturing technique; automatically compiling process step data for each process step in the manufacturing process; automatically calculating process metrics from a summation of the compiled process step data for each process step; and, presenting the automatically calculated process metrics to the user. A method for evaluating a transition from a batch manufacturing technique to a lean manufacturing technique can comprise the steps of: collecting manufacturing process step characterization parameters; selecting a lean manufacturing technique for analysis; communicating the selected lean manufacturing technique and the manufacturing process step characterization parameters to an automatic manufacturing technique evaluation engine having a mathematical model for generating manufacturing technique evaluation data; and, using the lean manufacturing technique evaluation data to determine whether to transition from an existing manufacturing technique to the selected lean manufacturing technique.

The Influence of Lean on K-12 District Management: A Case Study

ERIC Educational Resources Information Center

Brown, Beverly

2011-01-01

For decades, policymakers and educators have focused on public school equity and adequacy, while paying little attention to efficiency. This qualitative single case study was designed to capture explicit information about Lean management, operations, and culture in a K-12 Michigan school district engaged in Lean training and implementation for a…

Interlacing Mission, Strategic Planning, and Vision to Lean: Powerful DNA for Change

ERIC Educational Resources Information Center

Arnold, Alison; Flumerfelt, Shannon

2012-01-01

The authors' purpose for this article is to describe a K-12 public school district's journey to internalize and actualize its mission, strategic planning and vision as one coherent engagement using Lean principles and tools. Lean jointly comprises an organizational philosophy and management toolkit prominent in private, government, and nonprofit…

Lean red meat consumption and lipid profiles in adolescent girls

PubMed Central

Bradlee, M. Loring; Singer, Martha R.; Moore, Lynn L.

2014-01-01

Background Epidemiologic studies of red meat consumption often fail to distinguish between leaner and fattier or processed cuts of meat. Red meat has also been frequently linked with less healthy diet patterns. Data exploring health effects of lean red meat in younger individuals, particularly in the context of a healthy diet, are sparse. This study examined the effects of lean red meat in combination with higher intakes of fruit/non-starchy vegetables on lipid profiles in older adolescent girls. Methods Data from 1,461 girls followed for 10 years starting at 9-10 years of age in the NHLBI Growth and Health Study were used. Diet was assessed using multiple sets of 3-day records collected over eight exam cycles. Outcome measures included fasting levels of low-density lipoprotein cholesterol (LDL-C), high-density lipoprotein cholesterol (HDL-C), non-high-density lipoprotein cholesterol and triglycerides at ages 18-20 years. Results After adjusting for age, race, SES, height, activity level, hours of television/day, and intakes of whole grains and dairy foods using multivariable modeling, girls consuming ≥6 oz lean red meat/wk combined with ≥2 servings of fruit/non-starchy vegetables/day had LDL levels about 6-7 mg/dL lower (p<0.05) than girls with lower intakes of lean red meat and fruit/non-starchy vegetables. In addition, girls with higher intakes of both were 33% less likely (OR=0.67, 95% CI: 0.48-0.94) to have an LDL-C ≥110 mg/dL and 41% less likely (OR=0.59, 95% CI: 0.42, 0.83) to have an elevated LDL:HDL ratio (≥2.2) at the end of adolescence. Conclusion These analyses suggest that lean red meat may be included in a healthy adolescent diet without unfavorable effects on lipid values. PMID:23663235

Efficient Project Delivery Using Lean Principles - An Indian Case Study

NASA Astrophysics Data System (ADS)

Kovvuri, P. Ramachandra Reddy; Sawhney, Anil; Ahuja, Ritu; Sreekumar, Aiswarya

2016-03-01

Construction industry in India is growing at a rapid pace. Along with this growth, the industry is facing numerous challenges that are making delivery of projects inefficient. Experts believe that capacity constraints in the industry need to be addressed immediately. Government has recommended `introduction of efficient technologies and modern management techniques' to increase the productivity of the industry. In this context, lean principles can act as a lever to make project delivery more efficient and provide the much needed impetus to the Indian construction sector. Around the globe lean principles are showing positive results on the projects. Project teams are reporting improvements in construction time, cost and quality along with softer benefits of enhanced collaboration, coordination and trust in project teams. Can adoption of lean principles provide similar benefits in the Indian construction sector? This research was conducted to answer this question. Using an action research approach a key lean construction tool called Last Planner System (LPS) was tested on a large Indian construction project. The work described in this work investigates the improvements achieved in project delivery by adopting LPS in Indian construction sector. Comparison in pre- and post-implementation data demonstrates increase in the certainty of work-flow and improves schedule compliance. This is measured through a simple LPS metric called percent plan complete. Explicit improvements in schedule performance are seen during 8 week LPS implementation along with implicit improvements in coordination, collaboration and trust in the project team. This work reports the findings of LPS implementation on the case study project outlining the barriers and drivers to adoption, strategies needed to ensure successful implementation and roadmap for implementation. Based on the findings the authors envision that lean construction can make project delivery more efficient in India.

Lean spacecraft avionics trade study

NASA Technical Reports Server (NTRS)

Main, John A.

1994-01-01

Spacecraft design is generally an exercise in design trade-offs: fuel vs. weight, power vs. solar cell area, radiation exposure vs. shield weight, etc. Proper analysis of these trades is critical in the development of lightweight, efficient, 'lean' satellites. The modification of the launch plans for the Magnetosphere Imager (MI) to a Taurus launcher from the much more powerful Delta has forced a reduction in spacecraft weight availability into the mission orbit from 1300 kg to less than 500 kg. With weight now a driving factor it is imperative that the satellite design be extremely efficient and lean. The accuracy of engineering trades now takes on an added importance. An understanding of spacecraft subsystem interactions is critical in the development of a good spacecraft design, yet it is a challenge to define these interactions while the design is immature. This is currently an issue in the development of the preliminary design of the MI. The interaction and interfaces between this spacecraft and the instruments it carries are currently unclear since the mission instruments are still under development. It is imperative, however, to define these interfaces so that avionics requirements ideally suited to the mission's needs can be determined.

The LEAN Payload Integration Process

NASA Technical Reports Server (NTRS)

Jordan, Lee P.; Young, Yancy; Rice, Amanda

2011-01-01

It is recognized that payload development and integration with the International Space Station (ISS) can be complex. This streamlined integration approach is a first step toward simplifying payload integration; making it easier to fly payloads on ISS, thereby increasing feasibility and interest for more research and commercial organizations to sponsor ISS payloads and take advantage of the ISS as a National Laboratory asset. The streamlined integration approach was addressed from the perspective of highly likely initial payload types to evolve from the National Lab Pathfinder program. Payloads to be accommodated by the Expedite the Processing of Experiments for Space Station (EXPRESS) Racks and Microgravity Sciences Glovebox (MSG) pressurized facilities have been addressed. It is hoped that the streamlined principles applied to these types of payloads will be analyzed and implemented in the future for other host facilities as well as unpressurized payloads to be accommodated by the EXPRESS Logistics Carrier (ELC). Further, a payload does not have to be classified as a National Lab payload in order to be processed according to the lean payload integration process; any payload that meets certain criteria can follow the lean payload integration process.

Fat content in individual muscle fibers of lean and obese subjects.

PubMed

Malenfant, P; Joanisse, D R; Thériault, R; Goodpaster, B H; Kelley, D E; Simoneau, J A

2001-09-01

To examine skeletal muscle intracellular triglyceride concentration in different fiber types in relation to obesity. Skeletal muscle fiber type distribution and intracellular lipid content were measured in vastus lateralis samples obtained by needle biopsy from lean and obese individuals. Seven lean controls (body mass index (BMI) 23.0+/-3.3 kg/m(2); mean+/-s.d.) and 14 obese (BMI 33.7+/-2.7 kg/m(2)) individuals; both groups included comparable proportions of men and women. Samples were histochemically stained for the identification of muscle fiber types (myosin ATPase) and intracellular lipid aggregates (oil red O dye). The number and size of fat aggregates as well as their concentration within type I, IIA and IIB muscle fiber types were measured. The cellular distribution of the lipid aggregates was also examined. The size of fat aggregates was not affected by obesity but the number of lipid droplets within muscle fibers was twice as abundant in obese compared to lean individuals. This was seen in type I (298+/-135 vs 129+/-75; obese vs lean, P<0.05), IIA (132+/-67 vs 79+/-29; P<0.05), and IIB (103+/-63 vs 51+/-13; P<0.05) muscle fibers. A more central distribution of lipid droplets was observed in muscle fibers of obese compared to lean subjects (27.2+/-5.7 vs 19.7+/-6.4%; P<0.05). The higher number of lipid aggregates and the disposition to a greater central distribution in all fiber types in obesity indicate important changes in lipid metabolism and/or storage that are fiber type-independent.

Lean methodology in i.v. medication processes in a children's hospital.

PubMed

L'Hommedieu, Timothy; Kappeler, Karl

2010-12-15

The impact of lean methodology in i.v. medication processes in a children's hospital was studied. Medication orders at a children's hospital were analyzed for 30 days to identify the specific times when most medications were changed or discontinued. Value-stream mapping was used to define the current state of preparation and identify non-value-added tasks in the i.v. medication preparation and dispensing processes. An optimization model was created using specific measurements to establish the optimal number of batches and batch preparation times of batches. Returned i.v. medications were collected for 7 days before and after implementation of the lean process to determine the impact of the lean process changes. Patient-days increased from 1,836 during the first collection period to 2,017 during the second, and the total number of i.v. doses dispensed increased from 8,054 to 9,907. Wasted i.v. doses decreased from 1,339 (16.6% of the total doses dispensed) to 853 (8.6%). With the new process, Nationwide Children's Hospital was projected to realize a weekly savings of $8,197 ($426,244 annually), resulting in a 2.6% reduction in annual drug expenditure. The annual savings is a conservative estimate, due to the 10% increase in patient-days after the lean collection period compared with baseline. The differences in wasted doses and their costs were significant (p < 0.05). Implementing lean concepts in the i.v. medication preparation process had a positive effect on efficiency and drug cost.

Lean mass and insulin resistance in women with polycystic ovary syndrome.

PubMed

Comerford, Kevin B; Almario, Rogelio U; Kim, Kyoungmi; Karakas, Sidika E

2012-09-01

Insulin resistance is common in women with polycystic ovary syndrome (PCOS). Muscle is the major tissue utilizing glucose while excess adipose tissue relates to insulin resistance. Thus, body composition is likely to be an important regulator of insulin sensitivity. Thirty-nine PCOS patients (age: 29.9±1.0 years; BMI: 33.8±1.2 kg/m(2)) participated in a cross sectional study. Body composition was measured by dual energy x-ray absorptiometry (DEXA). Insulin resistance and secretion were assessed using oral glucose tolerance test (OGTT) and frequently sampled intravenous glucose tolerance test (FS-IVGTT). In contrast with the conventional expectations, lean mass correlated directly (P<.05) with the insulin resistance measure HOMA (r=0.440); and inversely with the insulin sensitivity index QUICKI (r=-0.522) independent of fat mass. In 11 pairs of subjects matched for fat mass (35.6±2.2 and 35.6±2.4 kg) but with discordant lean mass (52.8±1.8 vs 44.4±1.6 kg), those with higher lean mass had a higher glucose response during OGTT (AUC(Glucose); P=.034). In contrast, 17 pairs matched for lean mass (48.7±1.7 and 48.9±1.6 kg) but discordant for fat mass (43.3±2.6 vs 30.3±8.9 kg) showed no differences in insulin resistance parameters. These novel findings indicate that lean mass relates directly to insulin resistance in PCOS. Published by Elsevier Inc.

Qualitative Examination of Strategies to Overcome Resistance to Change in Lean Manufacturing

ERIC Educational Resources Information Center

Burmester, Elizabeth

2017-01-01

Approximately 80% of lean manufacturing program initiatives are abandoned in the first year of implementation. Only 2% of organizations that embark on the lean journey complete it with the results and the sustainability they expected. There is a gap in past research regarding, the leadership strategies organizations can use to overcome resistance…

Elimination of waste: creation of a successful Lean colonoscopy program at an academic medical center.

PubMed

Damle, Aneel; Andrew, Nathan; Kaur, Shubjeet; Orquiola, Alan; Alavi, Karim; Steele, Scott R; Maykel, Justin

2016-07-01

Lean processes involve streamlining methods and maximizing efficiency. Well established in the manufacturing industry, they are increasingly being applied to health care. The objective of this study was to determine feasibility and effectiveness of applying Lean principles to an academic medical center colonoscopy unit. Lean process improvement involved training endoscopy personnel, observing patients, mapping the value stream, analyzing patient flow, designing and implementing new processes, and finally re-observing the process. Our primary endpoint was total colonoscopy time (minutes from check-in to discharge) with secondary endpoints of individual segment times and unit colonoscopy capacity. A total of 217 patients were included (November 2013-May 2014), with 107 pre-Lean and 110 post-Lean intervention. Pre-Lean total colonoscopy time was 134 min. After implementation of the Lean process, mean colonoscopy time decreased by 10 % to 121 min (p = 0.01). The three steps of the process affected by the Lean intervention (time to achieve adequate sedation, time to recovery, and time to discharge) decreased from 3.7 to 2.4 min (p < 0.01), 4.0 to 3.4 min (p = 0.09), and 41.2 to 35.4 min (p = 0.05), respectively. Overall, unit capacity of colonoscopies increased from 39.6 per day to 43.6. Post-Lean patient satisfaction surveys demonstrated an average score of 4.5/5.0 (n = 73) regarding waiting time, 4.9/5.0 (n = 60) regarding how favorably this experienced compared to prior colonoscopy experiences, and 4.9/5.0 (n = 74) regarding professionalism of staff. One hundred percentage of respondents (n = 69) stated they would recommend our institution to a friend for colonoscopy. With no additional utilization of resources, a single Lean process improvement cycle increased productivity and capacity of our colonoscopy unit. We expect this to result in increased patient access and revenue while maintaining patient satisfaction. We believe these results are

A fuzzy model for achieving lean attributes for competitive advantages development using AHP-QFD-PROMETHEE

NASA Astrophysics Data System (ADS)

Roghanian, E.; Alipour, Mohammad

2014-06-01

Lean production has become an integral part of the manufacturing landscape as its link with superior performance and its ability to provide competitive advantage is well accepted among academics and practitioners. Lean production helps producers in overcoming the challenges organizations face through using powerful tools and enablers. However, most companies are faced with restricted resources such as financial and human resources, time, etc., in using these enablers, and are not capable of implementing all these techniques. Therefore, identifying and selecting the most appropriate and efficient tool can be a significant challenge for many companies. Hence, this literature seeks to combine competitive advantages, lean attributes, and lean enablers to determine the most appropriate enablers for improvement of lean attributes. Quality function deployment in fuzzy environment and house of quality matrix are implemented. Throughout the methodology, fuzzy logic is the basis for translating linguistic judgments required for the relationships and correlation matrix to numerical values. Moreover, for final ranking of lean enablers, a multi-criteria decision-making method (PROMETHEE) is adopted. Finally, a case study in automotive industry is presented to illustrate the implementation of the proposed methodology.

Development of a bedside viable ultrasound protocol to quantify appendicular lean tissue mass.

PubMed

Paris, Michael T; Lafleur, Benoit; Dubin, Joel A; Mourtzakis, Marina

2017-10-01

Ultrasound is a non-invasive and readily available tool that can be prospectively applied at the bedside to assess muscle mass in clinical settings. The four-site protocol, which images two anatomical sites on each quadriceps, may be a viable bedside method, but its ability to predict musculature has not been compared against whole-body reference methods. Our primary objectives were to (i) compare the four-site protocol's ability to predict appendicular lean tissue mass from dual-energy X-ray absorptiometry; (ii) optimize the predictability of the four-site protocol with additional anatomical muscle thicknesses and easily obtained covariates; and (iii) assess the ability of the optimized protocol to identify individuals with low lean tissue mass. This observational cross-sectional study recruited 96 university and community dwelling adults. Participants underwent ultrasound scans for assessment of muscle thickness and whole-body dual-energy X-ray absorptiometry scans for assessment of appendicular lean tissue. Ultrasound protocols included (i) the nine-site protocol, which images nine anterior and posterior muscle groups in supine and prone positions, and (ii) the four-site protocol, which images two anterior sites on each quadriceps muscle group in a supine position. The four-site protocol was strongly associated (R 2  = 0.72) with appendicular lean tissue mass, but Bland-Altman analysis displayed wide limits of agreement (-5.67, 5.67 kg). Incorporating the anterior upper arm muscle thickness, and covariates age and sex, alongside the four-site protocol, improved the association (R 2  = 0.91) with appendicular lean tissue and displayed narrower limits of agreement (-3.18, 3.18 kg). The optimized protocol demonstrated a strong ability to identify low lean tissue mass (area under the curve = 0.89). The four-site protocol can be improved with the addition of the anterior upper arm muscle thickness, sex, and age when predicting appendicular lean tissue mass

"Leaning" the process of venous thromboembolism prophylaxis.

PubMed

Biffl, Walter L; Beno, Matthew; Goodman, Philip; Bahia, Amit; Sabel, Allison; Snow, Karen; Steele, Andrew W; Swartwood, Claire; Thienelt, Christiane; MacKenzie, Thomas D; Mehler, Philip S

2011-03-01

Lean principles have been used at Denver Health Medical Center since 2005 to streamline nonclinical processes. Despite allocation of significant resources, particularly the expense of low molecular weight heparin (LMWH), to prophylaxis of venous thromboembolism (VTE), the incidence of postoperative VTE was significantly worse than national benchmarks. VTE risk factors were not consistently assessed, and the prescribing of prophylaxis varied widely. Lean was employed to standardize and implement risk assessment and evidence-based VTE prophylaxis for the institution. In a rapid improvement event, a multidisciplinary group formulated an evidence-based risk assessment tool and clinical practice guideline for VTE prophylaxis, with plans for hospitalwide implementation and monitoring. The effects were immediate and improved steadily with feedback to clinicians. Within six months, compliance with the standard approached 100%. One year after implementation, the use of LMWH decreased more than 60% below baseline, and the use of sequential compression devices decreased by nearly 30%. With increased use of unfractionated heparin, the cost savings on VTE prophylaxis exceeded $15,000 per month, for a total of $425,000 since implementation. Moreover, the incidence of VTE decreased markedly during the same period. By reducing VTE rates, a total cost savings of $6.2 million was estimated for the past 28 months. Applying Lean to the clinical management of VTE prophylaxis improved compliance with standards and saved the hospital a significant amount of money. This was achieved without compromising clinical outcomes. This experience could be replicated at other institutions.

An integrated lean-methods approach to hospital facilities redesign.

PubMed

Nicholas, John

2012-01-01

Lean production methods for eliminating waste and improving processes in manufacturing are now being applied in healthcare. As the author shows, the methods are appropriate for redesigning hospital facilities. When used in an integrated manner and employing teams of mostly clinicians, the methods produce facility designs that are custom-fit to patient needs and caregiver work processes, and reduce operational costs. The author reviews lean methods and an approach for integrating them in the redesign of hospital facilities. A case example of the redesign of an emergency department shows the feasibility and benefits of the approach.

Platelets derived from the bone marrow of diabetic animals show dysregulated endoplasmic reticulum stress proteins that contribute to increased thrombosis.

PubMed

Hernández Vera, Rodrigo; Vilahur, Gemma; Ferrer-Lorente, Raquel; Peña, Esther; Badimon, Lina

2012-09-01

Patients with diabetes mellitus have an increased risk of suffering atherothrombotic syndromes and are prone to clustering cardiovascular risk factors. However, despite their dysregulated glucose metabolism, intensive glycemic control has proven insufficient to reduce thrombotic complications. Therefore, we aimed to elucidate the determinants of thrombosis in a model of type 2 diabetes mellitus with cardiovascular risk factors clustering. Intravital microscopy was used to analyze thrombosis in vivo in Zucker diabetic fatty rats (ZD) and lean normoglycemic controls. Bone marrow (BM) transplants were performed to test the contribution of each compartment (blood or vessel wall) to thrombogenicity. ZD showed significantly increased thrombosis compared with lean normoglycemic controls. BM transplants demonstrated the key contribution of the hematopoietic compartment to increased thrombogenicity. Indeed, lean normoglycemic controls transplanted with ZD-BM showed increased thrombosis with normal glucose levels, whereas ZD transplanted with lean normoglycemic controls-BM showed reduced thrombosis despite presenting hyperglycemia. Significant alterations in megakaryopoiesis and platelet-endoplasmic reticulum stress proteins, protein disulfide isomerase and 78-kDa glucose-regulated protein, were detected in ZD, and increased tissue factor procoagulant activity was detected in plasma and whole blood of ZD. Our results indicate that diabetes mellitus with cardiovascular risk factor clustering favors BM production of hyperreactive platelets with altered protein disulfide isomerase and 78-kDa glucose-regulated protein expression that can contribute to increase thrombotic risk independently of blood glucose levels.

Multifuel evaluation of rich/quench/lean combustor

NASA Technical Reports Server (NTRS)

Novick, A. S.; Troth, D. L.; Notardonato, J.

1982-01-01

Test results on the RQL low NO(x) industrial gas turbine engine are reported. The air-staged combustor comprises an initial rich burning zone, followed by a quench zone, and a lean reaction and dilution zone. The combustor was tested as part of the DoE/NASA program to define the technology for developing a durable, low-emission gas turbine combustor capable of operation with minimally processed petroleum residual, synthetic, or low/mid-heating value gaseous fuels. The properties of three liquid and two gaseous fuels burned in the combustor trials are detailed. The combustor featured air staging, variable geometry, and generative/convective cooling. The lean/rich mixtures could be varied in zones simultaneously or separately while maintaining a specified pressure drop. Low NO(x) and smoke emissions were produced with each fuel burned, while high combustor efficiencies were obtained.

Novel lean type 2 diabetic rat model using gestational low-protein programming

USDA-ARS?s Scientific Manuscript database

Type 2 diabetes (T2D) in lean individuals is not well studied and up to 26% of diabetes occurs in these individuals. Although the cause is not well understood, it has been primarily attributed to nutritional issues during early development. Our objective was to develop a lean T2D model using gestati...

Effect of acute ozone exposure on the lung metabolomes of obese and lean mice.

PubMed

Mathews, Joel Andrew; Kasahara, David Itiro; Cho, Youngji; Bell, Lauren Nicole; Gunst, Philip Ross; Karoly, Edward D; Shore, Stephanie Ann

2017-01-01

Pulmonary responses to the air pollutant, ozone, are increased in obesity. Both obesity and ozone cause changes in systemic metabolism. Consequently, we examined the impact of ozone on the lung metabolomes of obese and lean mice. Lean wildtype and obese db/db mice were exposed to acute ozone (2 ppm for 3 h) or air. 24 hours later, the lungs were excised, flushed with PBS to remove blood and analyzed via liquid-chromatography or gas-chromatography coupled to mass spectrometry for metabolites. Both obesity and ozone caused changes in the lung metabolome. Of 321 compounds identified, 101 were significantly impacted by obesity in air-exposed mice. These included biochemicals related to carbohydrate and lipid metabolism, which were each increased in lungs of obese versus lean mice. These metabolite changes may be of functional importance given the signaling capacity of these moieties. Ozone differentially affected the lung metabolome in obese versus lean mice. For example, almost all phosphocholine-containing lysolipids were significantly reduced in lean mice, but this effect was attenuated in obese mice. Glutathione metabolism was also differentially affected by ozone in obese and lean mice. Finally, the lung metabolome indicated a role for the microbiome in the effects of both obesity and ozone: all measured bacterial/mammalian co-metabolites were significantly affected by obesity and/or ozone. Thus, metabolic derangements in obesity appear to impact the response to ozone.

Accuracy of Body Mass Index Versus Lean Mass Index for Prediction of Sarcopenia in Older Women.

PubMed

Benton, M J; Silva-Smith, A L

2018-01-01

We compared accuracy of body mass index (BMI) versus lean mass index (LMI) to predict sarcopenia in 58 community-dwelling women (74.1±0.9 years). Lean mass was measured with multi-frequency bioelectrical impedance analysis, and strength was measured with Arm Curl test, Chair Stand test, and handgrip dynamometry. Sarcopenia was defined as low LMI. When categorized by BMI, normal women had less absolute lean mass (37.6±1.0 vs. 42.6±0.9 kg; P<0.001) and less relative lean mass (14.1±0.2 vs. 16.1±0.2 kg/m2; P<0.001) compared to overweight/obese women, but no differences in strength. When categorized by LMI, normal women had more absolute lean mass (44.0±0.7 vs. 35.7±0.7 kg; P<0.001), more relative lean mass (16.2±0.2 vs. 13.8±0.2 kg/m2; P<0.001), and greater upper body strength (16.7±0.9 vs. 14.2±0.6 arm curls; P<0.05) compared to women with low LMI. BMI failed to accurately predict low values of lean mass and strength. For clinical assessment, calculation of LMI rather than BMI is appropriate.

Barriers of lean construction implementation in the Moroccan construction industry

NASA Astrophysics Data System (ADS)

Bajjou, Mohamed Saad; Chafi, Anas

2018-04-01

Improving the production system performance has become a fundamental pillar that must be taken into consideration in the construction industry. Recent developments in the construction sector have led to renewed interest in new techniques of management. Lean Construction is a very effective approach that has gained a high popularity by its ability to eliminate waste and maximize the value for the customer. Although both developed and developing countries have gained large benefits by implementing Lean Construction approach, several experiences showed many barriers that are hindering its implementation especially in developing countries. This paper aims to assess the critical barriers to the successful implementation in the Moroccan construction industry. Based on a literature review, followed by an analysis of data collected from a questionnaire survey which targeted 330 practitioners in the Moroccan construction field, several barriers were identified as key barriers. The findings of this investigation revealed that there are significant barriers such as Lack of knowledge about Lean Construction concepts, Unskilled Human Resources, and insufficient financial resources.

Using data to make decisions and drive results: a LEAN implementation strategy.

PubMed

Panning, Rick

2005-03-28

During the process of facility planning, Fairview Laboratory Services utilized LEAN manufacturing to maximize efficiency, simplify processes, and improve laboratory support of patient care services. By incorporating the LEAN program's concepts in our pilot program, we were able to reduce turnaround time by 50%, improve productivity by greater than 40%, reduce costs by 31%, save more than 440 square feet of space, standardize work practices, reduce errors and error potential, continuously measure performance, eliminate excess unused inventory and visual noise, and cross-train 100% of staff in the core laboratory. In addition, we trained a core team of people that is available to coordinate future LEAN projects in the laboratory and other areas of the organization.

Characterization of complexities in combustion instability in a lean premixed gas-turbine model combustor.

PubMed

Gotoda, Hiroshi; Amano, Masahito; Miyano, Takaya; Ikawa, Takuya; Maki, Koshiro; Tachibana, Shigeru

2012-12-01

We characterize complexities in combustion instability in a lean premixed gas-turbine model combustor by nonlinear time series analysis to evaluate permutation entropy, fractal dimensions, and short-term predictability. The dynamic behavior in combustion instability near lean blowout exhibits a self-affine structure and is ascribed to fractional Brownian motion. It undergoes chaos by the onset of combustion oscillations with slow amplitude modulation. Our results indicate that nonlinear time series analysis is capable of characterizing complexities in combustion instability close to lean blowout.

Lean and Agile: An Epistemological Reflection

ERIC Educational Resources Information Center

Browaeys, Marie-Joelle; Fisser, Sandra

2012-01-01

Purpose: The aim of the paper is to contribute to the discussion of treating the concepts of lean and agile in isolation or combination by presenting an alternative view from complexity thinking on these concepts, considering an epistemological approach to this topic. Design/methodology/approach: The paper adopts an epistemological approach, using…

STS-52 MS Veach and Payload Specialist MacLean during JSC bailout exercises

NASA Technical Reports Server (NTRS)

1992-01-01

STS-52 Columbia, Orbiter Vehicle (OV) 102, Mission Specialist (MS) Charles Lacy Veach (left) and Canadian Payload Specialist Steven G. MacLean listen to a briefing during emergency egress (bailout) training exercises in JSC's Weightless Environment Training Facility (WETF) Bldg 29. Veach and MacLean are fully outfitted in launch and entry suits (LESs), launch and entry helmets (LEHs), parachutes, and water survival equipment including a life jacket. The WETF's 25-ft deep pool will simulate the ocean as the crewmember's prepare for the event of a water landing. MacLean represents the Canadian Space Agency (CSA).

Study on lean thinking among MSMEs in the Machine tool sector in India

NASA Astrophysics Data System (ADS)

Priyaadarshini, R. G.; Sathish Kumar, V. R.; Aishwarya Rajlakshmi, S.

2018-02-01

In the era of stiff competition and customer expectations, manufacturing organizations across the world are struggling hard to minimize their costs and maximise their performance. Micro, Small and Medium enterprises (MSMEs), who are dependent on large corporate for business and support have a tall task of keeping pace quality in processes and output. They are in the constant vigil to adopt new systems and practices so that they can minimise their cost and maximize the productivity. This study has been conducted in the machine tool sector of Coimbatore, India; which houses more than 9000 companies and offers employment to over one lakh employees. They have a tremendous pressure to use scientific processes to increase their product quality and productivity. While Lean manufacturing has been the thrust to improve the competitiveness among MSMEs in India, this study has attempted to understand their attitude towards lean management and understand the extent to which companies practice lean tools and practices. It has been found that most of the organizations in the study possess a culture of lean thinking and possess the support of top management and employees also towards the initiative. It is also seen that the organizations that incorporated lean in their daily operations have been able to scale up their productivity.

Oxidative stress and inflammation in lean and obese subjects with polycystic ovary syndrome.

PubMed

Blair, Sarah A; Kyaw-Tun, Tommy; Young, Ian S; Phelan, Niamh A; Gibney, James; McEneny, Jane

2013-01-01

To determine whether polycystic ovary syndrome (PCOS) independently influences oxidative stress and inflammation or if the culprit is the comorbidities of obesity and/or insulin resistance common to this condition. Thirty women with PCOS were matched for age, body mass index and insulin resistance with 30 control subjects. Oxidative stress was examined by measuring the total oxidant status (TOS) and total antioxidant capacity (TAC) by spectrophotometric assay. The inflammatory biomarkers, C-reactive protein, plasminogen activator inhibitor-1, myeloperoxidase, neopterin, and serum amyloid A were measured by ELISA methodologies. Oxidative status was increased in the PCOS subjects relative to their weight-matched controls (TOS: obese PCOS patients vs. obese controls, 42.42 +/- 4.49 vs. 32.57 +/- 1.97, p<0.05; lean PCOS patients vs. lean controls, 33.69 +/- 1.59 vs. 28.69 +/- 1.18 micromol H2O2 Equiv/L, p < 0.05). Furthermore, antioxidant capacity was lower in the lean PCOS group relative to their weight-matched controls (TAC: lean PCOS patients vs. lean controls, 1.10 +/- 0.09 vs. 1.49 +/- 0.03 nmol Trolox Equiv/L, p < 0.05). These results suggest that PCOS independently influenced oxidative stress. Overall, the presence of PCOS may increase cardiovascular risk.

Roadmap for Lean implementation in Indian automotive component manufacturing industry: comparative study of UNIDO Model and ISM Model

NASA Astrophysics Data System (ADS)

Jadhav, J. R.; Mantha, S. S.; Rane, S. B.

2015-06-01

The demands for automobiles increased drastically in last two and half decades in India. Many global automobile manufacturers and Tier-1 suppliers have already set up research, development and manufacturing facilities in India. The Indian automotive component industry started implementing Lean practices to fulfill the demand of these customers. United Nations Industrial Development Organization (UNIDO) has taken proactive approach in association with Automotive Component Manufacturers Association of India (ACMA) and the Government of India to assist Indian SMEs in various clusters since 1999 to make them globally competitive. The primary objectives of this research are to study the UNIDO-ACMA Model as well as ISM Model of Lean implementation and validate the ISM Model by comparing with UNIDO-ACMA Model. It also aims at presenting a roadmap for Lean implementation in Indian automotive component industry. This paper is based on secondary data which include the research articles, web articles, doctoral thesis, survey reports and books on automotive industry in the field of Lean, JIT and ISM. ISM Model for Lean practice bundles was developed by authors in consultation with Lean practitioners. The UNIDO-ACMA Model has six stages whereas ISM Model has eight phases for Lean implementation. The ISM-based Lean implementation model is validated through high degree of similarity with UNIDO-ACMA Model. The major contribution of this paper is the proposed ISM Model for sustainable Lean implementation. The ISM-based Lean implementation framework presents greater insight of implementation process at more microlevel as compared to UNIDO-ACMA Model.

Toward lean satellites reliability improvement using HORYU-IV project as case study

NASA Astrophysics Data System (ADS)

Faure, Pauline; Tanaka, Atomu; Cho, Mengu

2017-04-01

Lean satellite programs are programs in which the satellite development philosophy is driven by fast delivery and low cost. Though this concept offers the possibility to develop and fly risky missions without jeopardizing a space program, most of these satellites suffer infant mortality and fail to achieve their mission minimum success. Lean satellites with high infant mortality rate indicate that testing prior to launch is insufficient. In this study, the authors monitored failures occurring during the development of the lean satellite HORYU-IV to identify the evolution of the cumulative number of failures against cumulative testing time. Moreover, the sub-systems driving the failures depending on the different development phases were identified. The results showed that half to 2/3 of the failures are discovered during the early stage of testing. Moreover, when the mean time before failure was calculated, it appeared that for any development phase considered, a new failure appears on average every 20 h of testing. Simulations were also performed and it showed that for an initial testing time of 50 h, reliability after 1 month launch can be improved by nearly 6 times as compared to an initial testing time of 20 h. Through this work, the authors aim at providing a qualitative reference for lean satellites developers to better help them manage resources to develop lean satellites following a fast delivery and low cost philosophy while ensuring sufficient reliability to achieve mission minimum success.

Lean six sigma in healthcare.

PubMed

de Koning, Henk; Verver, John P S; van den Heuvel, Jaap; Bisgaard, Soren; Does, Ronald J M M

2006-01-01

Healthcare, as with any other service operation, requires systematic innovation efforts to remain competitive, cost efficient, and up-to-date. This article outlines a methodology and presents examples to illustrate how principles of Lean Thinking and Six Sigma can be combined to provide an effective framework for producing systematic innovation efforts in healthcare. Controlling healthcare cost increases, improving quality, and providing better healthcare are some of the benefits of this approach.

NASA Lewis Research Center lean-, rich-burn materials test burner rig

NASA Technical Reports Server (NTRS)

Stearns, C. A.; Robinson, R. C.

1994-01-01

The lean-, rich-burn materials test burner rig at NASA LeRC is used to evaluate the high temperature environmental durability of aerospace materials. The rig burns jet fuel and pressurized air, and sample materials can be subjected to both lean-burn and rich-burn environments. As part of NASA's Enabling Propulsion Materials (EPM) program, an existing rig was adapted to simulate the rich-burn quick-quench lean-burn (RQL) combustor concept which is being considered for the HSCT (high speed civil transport) aircraft. RQL materials requirements exceed that of current superalloys, thus ceramic matrix composites (CMC's) emerged as the leading candidate materials. The performance of these materials in the quasi reducing environment of the rich-burn section of the RQL is of fundamental importance to materials development. This rig was developed to conduct such studies, and its operation and capabilities are described.

The Role of Lean Process Improvement in Implementation of Evidence-Based Practices in Behavioral Health Care.

PubMed

Steinfeld, Bradley; Scott, Jennifer; Vilander, Gavin; Marx, Larry; Quirk, Michael; Lindberg, Julie; Koerner, Kelly

2015-10-01

To effectively implement evidence-based practices (EBP) in behavioral health care, an organization needs to have operating structures and processes that can address core EBP implementation factors and stages. Lean, a widely used quality improvement process, can potentially address the factors crucial to successful implementation of EBP. This article provides an overview of Lean and the relationship between Lean process improvement steps, and EBP implementation models. Examples of how Lean process improvement methodologies can be used to help plan and carry out implementation of EBP in mental health delivery systems are presented along with limitations and recommendations for future research and clinical application.

Workplace ergonomics in lean production environments: A literature review.

PubMed

Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

2015-01-01

Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

Implementing a Lean Management System in Primary Care: Facilitators and Barriers From the Front Lines.

PubMed

Hung, Dorothy; Martinez, Meghan; Yakir, Maayan; Gray, Caroline

2015-01-01

Although Lean management techniques are increasingly used in health care to improve quality and reduce costs, lessons about how to successfully implement this approach on the front lines of care delivery are not well documented. In this study, we highlight key facilitators and barriers to implementing Lean among frontline primary care providers. This case study took place at a large, ambulatory care delivery system serving nearly 1 million patients. In-depth interviews were conducted with primary care physicians, staff, and administrators to identify key factors impacting Lean redesigns in primary care. Overall, staff engagement and performance management, sensitivity to the professional values and culture of medicine, and perceived adequacy of organizational resources were critical when introducing Lean changes. Specific drivers of change included empowerment of staff at all levels, visual display of performance metrics, and a culture of innovation and collaboration. Barriers included physician resistance to standardized work, difficulty transferring management responsibilities to non-physician staff, and time and staffing required for participating in improvement efforts. Although Lean offers a new approach to delivering care, the implementation process itself is both complex and crucial to success. Understanding early facilitators and barriers can maximize Lean's, potential to improve health care delivery.

Readiness for change and job satisfaction in a case of lean management application - a comparative study.

PubMed

Lipińska-Grobelny, Agnieszka; Papieska, Ewelina

2012-09-01

This current study investigates the effect of lean management system on work attitudes of workers of two manufacturing companies. "Lean management" is a concept of work processes and human relations that determines company's productivity and profitability. Workers of two enterprises, the first one with lean production and the second one with old mass production, were compared for their readiness for change and job satisfaction (both emotional and cognitive aspect). The sample of 102 employees completed a battery of instruments such as: the Job Description Inventory by Neuberger and Allerbeck, the Job Affect Scale by Burke et al. and the Change-Readiness Scale by Kriegel and Brandt. Individuals from the lean manufacturing company were characterized by higher level of readiness for change, positive affect at work, and cognitive job satisfaction. In this approach the introduction of lean production positively affected company's human resource attitudes.

The effects of short-term overfeeding on insulin action in lean and reduced-obese individuals.

PubMed

Cornier, Marc-Andre; Bergman, Bryan C; Bessesen, Daniel H

2006-09-01

Insulin resistance is clearly associated with obesity. However, the role of excess energy intake per se as opposed to increased fat mass in the development of insulin resistance has not been clearly defined. It may be that the nutrient load provided by short-term overfeeding is sufficient to induce measurable changes in insulin action in skeletal muscle and the liver. We examined the effects of 3 days of overfeeding on insulin action and glucose kinetics in 13 lean (body mass index, 20.9 +/- 2.4 kg/m(2); 6 men, 7 women) and 9 reduced-obese (RO) (body mass index, 29.1 +/- 2.2 kg/m(2); 4 men, 5 women) individuals. A two-step euglycemic hyperinsulinemic clamp study (5 and 40 mU m(-2) min(-1)) with a primed, constant infusion of [6,6-(2)H(2)]glucose was performed after 3 days of a weight-maintenance diet and again after 3 days of overfeeding by 50% (50% carbohydrate, 30% fat, 20% protein). At baseline, lean individuals were more insulin sensitive, as measured by glucose infusion rate, than RO individuals (12.08 +/- 0.8 vs 7.62 +/- 1.0 mg x kg(-1) x min(-1), P < .01) with lean women being more insulin sensitive than lean men (P < .01). Overfeeding resulted in a reduction in glucose infusion rate in lean women (13.37 +/- 1.3 to 11.42 +/- 1.0 mg x kg(-1) x min(-1), P < .05), but no change was noted in lean men or RO individuals. Basal and insulin-stimulated glucose disposal remained unchanged with overfeeding in all groups. Low-dose insulin suppression of endogenous glucose production was impaired after overfeeding in lean women (euenergetic, 1.92 +/- 0.36 to 0.36 +/- 0.16 mg x kg(-1) x min(-1); overfeeding: 2.13 +/- 0.17 to 0.86 +/- 0.12 mg x kg(-1) x min(-1); P = .04) but remained unchanged in the other groups. These findings demonstrate that insulin action is reduced in lean, obese-resistant women after short-term overfeeding primarily because of an inhibition of insulin-mediated suppression of endogenous glucose production, whereas short-term overfeeding does not

Anthropometric and demographic predictors of handgrip strength and lean mass quality in hospitalized individuals.

PubMed

Rossato, Luana T; Barbosa, Cinthia D; Nahas, Paula C; Orsatti, Fábio L; de Oliveira, Erick P

2018-04-01

Low strength and/or lean mass quality are associated with higher hospitalization and mortality. The aim of this study was to evaluate the main demographic and anthropometric predictors of strength and lean mass quality in hospitalized patients. We evaluated 136 patients (18-86 years) of both sexes, admitted in a public hospital. Waist circumference (WC) was measured using an inelastic tape, lean mass (LM) was assessed by bioimpedance, and handgrip strength (HGS) was performed using a dynamometer. Lean mass quality (HGS/LM) was also calculated. We noted that LM predicted 33.1% of HGS, whereas WC was not associated with HGS. Evaluating LM and WC in the same statistical model, WC (β = -0.249, p = 0.001) increased the prediction of HGS by 4.7% when compared to LM alone. Accessing LM, WC, age, and sex in the same model an increase in the prediction of HGS by 7.3% was noted when compared to LM alone, but only LM and sex were significant. In addition, WC predicted the lean mass quality by 4% (β = -0.205, p = 0.016) and when WC, sex, and age were placed in the same model; WC (β = -0.172, p = 0.035) and sex (β = 0.332, p < 0.001) explained the variations in lean mass quality by 15%. The main predictor of lower HGS was lower LM, whereas sex showed a low association. Furthermore, although a low association was found, higher abdominal obesity and sex predicted lower lean mass quality. Copyright © 2018 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

Analysis of Lean Premixed/Prevaporized Combustion with KIVA-2

NASA Technical Reports Server (NTRS)

Deur, J. M.; Kundu, K. P.; Darling, D. D.; Cline, M. C.; Micklow, G. J.; Harper, M. R.; Simons, T. A.

1994-01-01

Requirements to reduce the emissions of pollutants from gas turbines used in aircraft propulsion and ground based power generation have led to consideration of lean premixed/prevaporized (LPP) combustion concept. This paper describes some of the LPP flame tube analyses performed at the NASA Research Center with KIVA-2, a well-known multi-dimensional CFD code for problems including sprays, turbulence, and combustion. Modifications to KIVA-2's boundary condition and chemistry treatments have been made to meet the needs of the present study. The study itself focuses on two key aspects of the LPP concept, low emissions and flame stability (including flashback and lean blowoff.

A Value Analysis of Lean Processes in Target Value Design and Integrated Project Delivery.

PubMed

Nanda, Upali; K Rybkowski, Zofia; Pati, Sipra; Nejati, Adeleh

2017-04-01

To investigate what key stakeholders consider to be the advantages and the opportunities for improvement in using lean thinking and tools in the integrated project delivery (IPD) process. A detailed literature review was followed by case study of a Lean-IPD project. Interviews with members of the project leadership team, focus groups with the integrated team as well as the design team, and an online survey of all stakeholders were conducted. Statistical analysis and thematic content analysis were used to analyze the data, followed by a plus-delta analysis. (1) Learning is a large, implicit benefit of Lean-IPD that is not currently captured by any success metric; (2) the cardboard mock-up was the most successful lean strategy; (3) although a collaborative project, the level of influence of different stakeholder groups was perceived to be different by different stakeholders; (4) overall, Lean-IPD was rated as better than traditional design-bid-build methods; and (5) opportunities for improvement reported were increase in accurate cost estimating, more efficient use of time, perception of imbalance of control/influence, and need for facilitation (which represents different points of view). While lean tools and an IPD method are preferred to traditional design-bid-build methods, the perception of different stakeholders varies and more work needs to be done to allow a truly shared decision-making model. Learning was identified as one of the biggest advantages.

Applying Lean principles and Kaizen rapid improvement events in public health practice.

PubMed

Smith, Gene; Poteat-Godwin, Annah; Harrison, Lisa Macon; Randolph, Greg D

2012-01-01

This case study describes a local home health and hospice agency's effort to implement Lean principles and Kaizen methodology as a rapid improvement approach to quality improvement. The agency created a cross-functional team, followed Lean Kaizen methodology, and made significant improvements in scheduling time for home health nurses that resulted in reduced operational costs, improved working conditions, and multiple organizational efficiencies.

Installation and testing of a cummins Qsk19 lean burn natural gas engine

NASA Astrophysics Data System (ADS)

Sutley, Franklin H.

The goal for a more efficient engine will never disappear. Over the years many different techniques have been explored within the common goal of higher efficiency. Lean combustion has proven to be effective at increasing efficiencies as well as reducing emissions. The purpose of this thesis is to install a modern Cummins QSK19G and perform certain test that will explore the lean combustion limits and other methods that could possibly increase efficiency even more. The entire installation and instrumentation process is documented within this thesis. The engine was installed in the Engines and Energy Conversion Laboratory at Colorado State University. The engine was installed with the hopes of instilling the desire for endless future tests from Cummins as well as other companies seeking this type of research engine. The lean limit was explored in the most detail. Cummins supplied a test plan that satisfied their desired stopping at a lean limit when the coefficient of variance of indicated mean effective pressure reached 5%. For the curiosity of others involved and this thesis, the lean limit was explored further until the engine could no longer ignite the ultra-lean combustion mixture. Friction accounts for a significant loss in a modern internal combustion engine. One role of the engine oil is to reduce these frictional losses as much as possible without causing increased wear. A test was conducted on the QSK19G to explore the effects of varying the engine oil viscosity. Frictional losses of two different viscosity oils were compared to the stock engine oil losses. The fact that reducing oil viscosity reduces frictional losses was proven in the test.

The use of Lean and Six Sigma methodologies in surgery: a systematic review.

PubMed

Mason, S E; Nicolay, C R; Darzi, A

2015-04-01

Lean and Six Sigma are improvement methodologies developed in the manufacturing industry and have been applied to healthcare settings since the 1990 s. They use a systematic and reproducible approach to provide Quality Improvement (QI), with a flexible process that can be applied to a range of outcomes across different patient groups. This review assesses the literature with regard to the use and utility of Lean and Six Sigma methodologies in surgery. MEDLINE, Embase, PsycINFO, Allied and Complementary Medicine Database, British Nursing Index, Cumulative Index to Nursing and Allied Health Literature, Health Business Elite and the Health Management Information Consortium were searched in January 2014. Experimental studies were included if they assessed the use of Lean or Six Sigma on the ability to improve specified outcomes in surgical patients. Of the 124 studies returned, 23 were suitable for inclusion with 11 assessing Lean, 6 Six Sigma and 6 Lean Six Sigma. The broad range of outcomes can be collated into six common aims: to optimise outpatient efficiency, to improve operating theatre efficiency, to decrease operative complications, to reduce ward-based harms, to reduce mortality and to limit unnecessary cost and length of stay. The majority of studies (88%) demonstrate improvement; however high levels of systematic bias and imprecision were evident. Lean and Six Sigma QI methodologies have the potential to produce clinically significant improvement for surgical patients. However there is a need to conduct high-quality studies with low risk of systematic bias in order to further understand their role. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Lean thinking in hospitals: is there a cure for the absence of evidence? A systematic review of reviews

PubMed Central

Andersen, Hege; Røvik, Kjell Arne; Ingebrigtsen, Tor

2014-01-01

Objective Lean interventions aim to improve quality of healthcare by reducing waste and facilitate flow in work processes. There is conflicting evidence on the outcomes of lean thinking, with quantitative and qualitative studies often contradicting each other. We suggest that reviewing the literature within the approach of a new contextual framework can deepen our understanding of lean as a quality-improvement method. This article theorises the concept of context by establishing a two-dimensional conceptual framework acknowledging lean as complex social interventions, deployed in different organisational dimensions and domains. The specific aim of the study was to identify factors facilitating intended outcomes from lean interventions, and to understand when and how different facilitators contribute. Design A two-dimensional conceptual framework was developed by combining Shortell's Dimensions of capability with Walshes’ Domains of an intervention. We then conducted a systematic review of lean review articles concerning hospitals, published in the period 2000–2012. The identified lean facilitators were categorised according to the intervention domains and dimensions of capability provided by the framework. Results We provide a framework emphasising context by relating facilitators to domains and dimensions of capability. 23 factors enabling a successful lean intervention in hospitals were identified in the systematic review, where management and a supportive culture, training, accurate data, physicians and team involvement were most frequent. Conclusions In the absence of evidence, the two-dimensional framework, incorporating the context, may prove useful for future research on variation in outcomes from lean interventions. Findings from the review suggest that characteristics and local application of lean, in addition to strategic and cultural capability, should be given further attention in healthcare quality improvement. PMID:24435890

Real-Time Culture Change Improves Lean Success: Sequenced Culture Change Gets Failing Grades.

PubMed

Kusy, Mitchell; Diamond, Marty; Vrchota, Scott

2015-01-01

Success with the Lean management system is rooted in a culture of stakeholder engagement and commitment. Unfortunately, many leaders view Lean as an "add-on" tool instead of one that requires a new way of thinking and approaching culture. This article addresses the "why, how, and what" to promote a Lean culture that works. We present a five-phased approach grounded in evidence-based practices of real-time culture change. We further help healthcare leaders understand the differences between traditional "sequenced" approaches to culture change and "real-time" methods--and why these real-time practices are more sustainable and ultimately more successful than traditional culture change methods.

Integration of Lean Method in English Language Teaching and Learning: A New Perspective

ERIC Educational Resources Information Center

Tilfarlioglu, Filiz Yalçin; Anwer, Jivan Kamal

2017-01-01

Lean is regarded as a systematic approach to maximizing value by minimizing waste, and by flowing the product or service at the pull of the customer demand. These key concepts of "value," "flow," and "pull," align with the ultimate lean goal: "perfection," or a continuous striving for improvement in the…

Human Behavior Based Exploratory Model for Successful Implementation of Lean Enterprise in Industry

ERIC Educational Resources Information Center

Sawhney, Rupy; Chason, Stewart

2005-01-01

Currently available Lean tools such as Lean Assessments, Value Stream Mapping, and Process Flow Charting focus on system requirements and overlook human behavior. A need is felt for a tool that allows one to baseline personnel, determine personnel requirements and align system requirements with personnel requirements. Our exploratory model--The…

Genetic variation in efficiency to deposit fat and lean meat in Norwegian Landrace and Duroc pigs.

PubMed

Martinsen, K H; Ødegård, J; Olsen, D; Meuwissen, T H E

2015-08-01

Feed costs amount to approximately 70% of the total costs in pork production, and feed efficiency is, therefore, an important trait for improving pork production efficiency. Production efficiency is generally improved by selection for high lean growth rate, reduced backfat, and low feed intake. These traits have given an effective slaughter pig but may cause problems in piglet production due to sows with limited body reserves. The aim of the present study was to develop a measure for feed efficiency that expressed the feed requirements per 1 kg deposited lean meat and fat, which is not improved by depositing less fat. Norwegian Landrace ( = 8,161) and Duroc ( = 7,202) boars from Topigs Norsvin's testing station were computed tomography scanned to determine their deposition of lean meat and fat. The trait was analyzed in a univariate animal model, where total feed intake in the test period was the dependent variable and fat and lean meat were included as random regression cofactors. These cofactors were measures for fat and lean meat efficiencies of individual boars. Estimation of fraction of total genetic variance due to lean meat or fat efficiency was calculated by the ratio between the genetic variance of the random regression cofactor and the total genetic variance in total feed intake during the test period. Genetic variance components suggested there was significant genetic variance among Norwegian Landrace and Duroc boars in efficiency for deposition of lean meat (0.23 ± 0.04 and 0.38 ± 0.06) and fat (0.26 ± 0.03 and 0.17 ± 0.03) during the test period. The fraction of the total genetic variance in feed intake explained by lean meat deposition was 12% for Norwegian Landrace and 15% for Duroc. Genetic fractions explained by fat deposition were 20% for Norwegian Landrace and 10% for Duroc. The results suggested a significant part of the total genetic variance in feed intake in the test period was explained by fat and lean meat efficiency. These new

Application of lean six sigma to waste minimization in cigarette paper industry

NASA Astrophysics Data System (ADS)

Syahputri, K.; Sari, R. M.; Anizar; Tarigan, I. R.; Siregar, I.

2018-02-01

The cigarette paper industry is one of the industry that is always experiencing increasing demand from consumers. Consumer expectations for the products produced also increased both in terms of quality and quantity. The company continuously improves the quality of its products by trying to minimize nonconformity, waste and improve the efficiency of the whole production process of the company. In this cigarette industry, there is a disability whose value is above the company’s defect tolerance that is 10% of the production amount per month. Another problem also occurs in the production time is too long due to the many activities that are not value added (non value added activities) on the production floor. To overcome this problem, it is necessary to improve the production process of cigarette paper and minimize production time by reducing non value added activities. Repairs done with Lean Six Sigma. Lean Six Sigma is a combination of Lean and Six Sigma concept with DMAIC method (Define, Measure, Analyze, Improve, Control). With this Lean approach, obtained total production time of 1479.13 minutes proposal with cycle efficiency process increased by 12.64%.

Lean six sigma methodologies improve clinical laboratory efficiency and reduce turnaround times.

PubMed

Inal, Tamer C; Goruroglu Ozturk, Ozlem; Kibar, Filiz; Cetiner, Salih; Matyar, Selcuk; Daglioglu, Gulcin; Yaman, Akgun

2018-01-01

Organizing work flow is a major task of laboratory management. Recently, clinical laboratories have started to adopt methodologies such as Lean Six Sigma and some successful implementations have been reported. This study used Lean Six Sigma to simplify the laboratory work process and decrease the turnaround time by eliminating non-value-adding steps. The five-stage Six Sigma system known as define, measure, analyze, improve, and control (DMAIC) is used to identify and solve problems. The laboratory turnaround time for individual tests, total delay time in the sample reception area, and percentage of steps involving risks of medical errors and biological hazards in the overall process are measured. The pre-analytical process in the reception area was improved by eliminating 3 h and 22.5 min of non-value-adding work. Turnaround time also improved for stat samples from 68 to 59 min after applying Lean. Steps prone to medical errors and posing potential biological hazards to receptionists were reduced from 30% to 3%. Successful implementation of Lean Six Sigma significantly improved all of the selected performance metrics. This quality-improvement methodology has the potential to significantly improve clinical laboratories. © 2017 Wiley Periodicals, Inc.

Lateral trunk lean and medializing the knee as gait strategies for knee osteoarthritis.

PubMed

Gerbrands, T A; Pisters, M F; Theeven, P J R; Verschueren, S; Vanwanseele, B

2017-01-01

To determine (1) if Medial Thrust or Trunk Lean reduces the knee adduction moment (EKAM) the most during gait in patients with medial knee osteoarthritis, (2) if the best overall strategy is the most effective for each patient and (3) if these strategies affect ankle and hip kinetics. Thirty patients with symptomatic medial knee osteoarthritis underwent 3-dimensional gait analysis. Participants received verbal instructions on two gait strategies (Trunk Lean and Medial Thrust) in randomized order after comfortable walking was recorded. The peaks and impulse of the EKAM and strategy-specific kinematic and kinetic variables were calculated for all conditions. Early stance EKAM peak was significantly reduced during Medial Thrust (-29%). During Trunk Lean, early and late stance EKAM peak and EKAM impulse reduced significantly (38%, 21% and -25%, respectively). In 79% of the subjects, the Trunk Lean condition was significantly more effective in reducing EKAM peak than Medial Thrust. Peak ankle dorsi and plantar flexion, knee flexion and hip extension and adduction moments were not significantly increased. Medial Thrust and Trunk Lean reduced the EKAM during gait in patients with knee osteoarthritis. Individual selection of the most effective gait modification strategy seems vital to optimally reduce dynamic knee loading during gait. No detrimental effects on external ankle and hip moments or knee flexion moments were found for these conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

Using Lean Thinking at an otorhinolaryngology outpatient clinic to improve quality of care.

PubMed

van Leijen-Zeelenberg, Janneke E; Brunings, Jan Wouter; Houkes, Inge; van Raak, Arno J A; Ruwaard, Dirk; Vrijhoef, Hubertus J M; Kremer, Bernd

2016-04-01

Although Lean Thinking has led to considerable improvement in a variety of healthcare settings, its effects on otorhinolaryngology remain underexposed. This study reports on how the implementation of Lean Thinking at an otorhinolaryngology outpatient clinic has affected patient and provider satisfaction, waste reduction, and organizational culture. Prospective before-and-after design. The 18-month prospective before-and-after design used mixed methods for data collection and analysis. A survey was conducted to measure satisfaction among patients and providers. Semistructured interviews were conducted to evaluate the effect of Lean Thinking on waste and organizational culture. During the project, 69 issues were posted on the Lean board. Improvements were made on 36 inefficiency issues, not all concerning a specific type of waste. Employees reported considerable improvement in transportation, motion, and waiting. Patient satisfaction was high both at baseline and follow-up and did not change significantly. The effects on provider satisfaction were slight; satisfaction with autonomy and participation decreased significantly, but satisfaction with communication increased significantly. The implementation of Lean Thinking at an otorhinolaryngology outpatient clinic reduced waste and increased provider satisfaction with communication. Although patient satisfaction did not change significantly, it cannot be concluded that the intervention had no effect on perceived quality of care. Other approaches to measure patients' perceptions should be considered. NA. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

High temperature-ultra performance liquid chromatography-mass spectrometry for the metabonomic analysis of Zucker rat urine.

PubMed

Gika, Helen G; Theodoridis, Georgios; Extance, Jon; Edge, Anthony M; Wilson, Ian D

2008-08-15

The applicability and potential of using elevated temperatures and sub 2-microm porous particles in chromatography for metabonomics/metabolomics was investigated using, for the first time, solvent temperatures higher than the boiling point of water (up to 180 degrees C) and thermal gradients to reduce the use of organic solvents. Ultra performance liquid chromatography, combined with mass spectrometry, was investigated for the global metabolite profiling of the plasma and urine of normal and Zucker (fa/fa) obese rats (a well established disease animal model). "Isobaric" high temperature chromatography, where the temperature and flow rate follow a gradient program, was developed and evaluated against a conventional organic solvent gradient. LC-MS data were first examined by established chromatographic criteria in order to evaluate the chromatographic performance and next were treated by special peak picking algorithms to allow the application of multivariate statistics. These studies showed that, for urine (but not plasma), chromatography at elevated temperatures provided better results than conventional reversed-phase LC with higher peak capacity and better peak asymmetry. From a systems biology point of view, better group clustering and separation was obtained with a larger number of variables of high importance when using high temperature-ultra performance liquid chromatography (HT-UPLC) compared to conventional solvent gradients.

Applying Lean Six Sigma to improve medication management.

PubMed

Nayar, Preethy; Ojha, Diptee; Fetrick, Ann; Nguyen, Anh T

2016-01-01

A significant proportion of veterans use dual care or health care services within and outside the Veterans Health Administration (VHA). In this study conducted at a VHA medical center in the USA, the authors used Lean Six Sigma principles to develop recommendations to eliminate wasteful processes and implement a more efficient and effective process to manage medications for dual care veteran patients. The purpose of this study is to: assess compliance with the VHA's dual care policy; collect data and describe the current process for co-management of dual care veterans' medications; and draft recommendations to improve the current process for dual care medications co-management. Input was obtained from the VHA patient care team members to draw a process map to describe the current process for filling a non-VHA prescription at a VHA facility. Data were collected through surveys and direct observation to measure the current process and to develop recommendations to redesign and improve the process. A key bottleneck in the process that was identified was the receipt of the non-VHA medical record which resulted in delays in filling prescriptions. The recommendations of this project focus on the four domains of: documentation of dual care; veteran education; process redesign; and outreach to community providers. This case study describes the application of Lean Six Sigma principles in one urban Veterans Affairs Medical Center (VAMC) in the Mid-Western USA to solve a specific organizational quality problem. Therefore, the findings may not be generalizable to other organizations. The Lean Six Sigma general principles applied in this project to develop recommendations to improve medication management for dual care veterans are applicable to any process improvement or redesign project and has valuable lessons for other VAMCs seeking to improve care for their dual care veteran patients. The findings of this project will be of value to VA providers and policy makers and health

Lean Body Mass and Bone Health in Urban Adolescents From Northern India.

PubMed

Marwaha, Raman K; Garg, M K; Bhadra, Kuntal; Mahalle, Namita; Mithal, Ambrish; Tandon, Nikhil

2017-03-15

To prepare percentile charts of lean body mass (LBM) among Indian urban children and adolescents; and to evaluate gender differences in LBM, and its relation with pubertal status. Secondary data analysis. School in city of Delhi, India. 1403 apparently healthy children and adolescents (826 boys) with mean (SD) age 13.2 (2.7) years. Lean body mass assessed by dual energy absorptiometry. Total and regional lean mass were greater in older age groups in both sexes. LBM showed rising trends up to the age of 18 years in boys, whereas it plateaued after the age of 15 years in girls. The age-associated increase in LBM was significantly higher in boys (130%) compared to girls (83%) (P<0.001). Total and regional lean mass increased with progression of pubertal staging in both genders. During pubertal development, LBM almost doubled (100% increase) from stage-2 to stage-5 in boys, as opposed to a 73% rise in girls (P<0.001). Total and regional lean mass and Appendicular skeletal muscle mass index (ASMI) was positively correlated with age, body mass index (BMI), serum 25(OH)D, total fat mass, and bone mineral content (BMC). Relation between LBM and BMC remained significant even after adjusting for age, fat mass and various biochemical parameters. Total and regional LBM rise with age and pubertal maturation in both genders, but more so in boys when compared to girls. LBM has direct bearing on BMC even after adjusting for age, fat mass and biochemical parameters.

Metformin increases pressure pain threshold in lean women with polycystic ovary syndrome.

PubMed

Kiałka, Marta; Milewicz, Tomasz; Sztefko, Krystyna; Rogatko, Iwona; Majewska, Renata

2016-01-01

Despite the strong preclinical rationale, there are only very few data considering the utility of metformin as a potential pain therapeutic in humans. The aim of this study was to determine the association between metformin therapy and pressure pain threshold (PPT) in lean women with polycystic ovary syndrome (PCOS). We hypothesized that metformin therapy in lean PCOS women increases PPT. Twenty-seven lean PCOS women with free androgen index phenotype >5 and 18 lean healthy controls were enrolled in the study. Fifteen of the PCOS women were randomly assigned to be treated with metformin 1,500 mg daily for 6 months. PPT and plasma β-endorphin levels were measured in all women at the beginning of the study and after 6 months of observation. We observed an increase in PPT values measured on deltoid and trapezius muscle in the PCOS with metformin group after 6 months of metformin administration (4.81±0.88 kg/cm(2), P<0.001 on deltoid muscle, and 5.71±1.16 kg/cm(2) on trapezius muscle). We did not observe any significant changes in PPT values in the PCOS without treatment group and in controls. We did not observe any significant changes in serum β-endorphin levels in any studied groups during the 6-month observation. We conclude that metformin therapy increases PPT in lean PCOS women, without affecting plasma β-endorphin concentration. Our results may suggest the potential role of metformin in pain therapy. We propose that larger, randomized studies on metformin impact on pain perception should be performed.

Comparing Textbook Coverage of Lean Management to Academic Research and Industry Practitioner Perceptions

ERIC Educational Resources Information Center

Marley, Kathryn A.; Stodnick, T. Michael; Heyl, Jeff

2013-01-01

Within operations management courses, most instructors choose to devote classroom time to teaching the topic of lean management. However, because the amount of time available for instructors to devote to this topic varies considerably, there is a great deal of latitude on which specific lean tools and techniques should be discussed. The authors…

Applying Lean Six Sigma for innovative change to the post-anesthesia care unit.

PubMed

Haenke, Roger; Stichler, Jaynelle F

2015-04-01

Many healthcare organizations are building or renovating patient care facilities. Using Lean Six Sigma methods, nurse leaders can eliminate unnecessary waste and improve work and patient care environments. Starting with a key department like the post-anesthesia care unit is a good way to expose staff and leaders to the potential of Lean.

Utilizing lean tools to improve value and reduce outpatient wait times in an Indian hospital.

PubMed

Miller, Richard; Chalapati, Nirisha

2015-01-01

This paper aims to demonstrate how lean tools were applied to some unique issues of providing healthcare in a developing country where many patients face challenges not found in developed countries. The challenges provide insight into how lean tools can be utilized to provide similar results across the world. This paper is based on a qualitative case study carried out by a master's student implementing lean at a hospital in India. This paper finds that lean tools such as value-stream mapping and root cause analysis can lead to dramatic reductions in waste and improvements in productivity. The problems of the majority of patients paying for their own healthcare and lacking transportation created scheduling problems that required patients to receive their diagnosis and pay for treatment within a single day. Many additional wastes were identified that were significantly impacting the hospital's ability to provide care. As a result of this project, average outpatient wait times were reduced from 1 hour to 15 minutes along with a significant increase in labor productivity. The results demonstrate how lean tools can increase value to the patients. It also provides are framework that can be utilized for healthcare providers in developed and developing countries to analyze their value streams to reduce waste. This paper is one of the first to address the unique issues of implementing lean to a healthcare setting in a developing country.

Lean mixture engine testing and evaluation program. [for automobile engine pollution and fuel performances

NASA Technical Reports Server (NTRS)

Dowdy, M. W.; Hoehn, F. W.; Griffin, D. C.

1975-01-01

Experimental results for fuel consumption and emissions are presented for a 350 CID (5.7 liter) Chevrolet V-8 engine modified for lean operation with gasoline. The lean burn engine achieved peak thermal efficiency at an equivalence ratio of 0.75 and a spark advance of 60 deg BTDC. At this condition the lean burn engine demonstrated a 10% reduction in brake specific fuel consumption compared with the stock engine; however, NOx and hydrocarbon emissions were higher. With the use of spark retard and/or slightly lower equivalence ratios, the NOx emissions performance of the stock engine was matched while showing a 6% reduction in brake specific fuel consumption. Hydrocarbon emissions exceeded the stock values in all cases. Diagnostic data indicate that lean performance in the engine configuration tested is limited by ignition delay, cycle-to-cycle pressure variations, and cylinder-to-cylinder distribution.

Is lost lean mass from intentional weight loss recovered during weight regain in postmenopausal women?

PubMed

Beavers, Kristen M; Lyles, Mary F; Davis, Cralen C; Wang, Xuewen; Beavers, Daniel P; Nicklas, Barbara J

2011-09-01

Despite the well-known recidivism of obesity, surprisingly little is known about the composition of body weight during weight regain. The objective of this study was to determine whether the composition of body weight regained after intentional weight loss is similar to the composition of body weight lost. The design was a follow-up to a randomized controlled trial of weight loss in which body composition was analyzed and compared in 78 postmenopausal women before the intervention, immediately after the intervention, and 6 and 12 mo after the intervention. All body mass and composition variables were lower immediately after weight loss than at baseline (all P < 0.05). More fat than lean mass was lost with weight loss, which resulted in body-composition changes favoring a lower percentage of body fat and a higher lean-to-fat mass ratio (P < 0.001). Considerable interindividual variability in weight regain was noted (CV = 1.07). In women who regained ≥2 kg body weight, a decreasing trend in the lean-to-fat mass ratio was observed, which indicated greater fat mass accretion than lean mass accretion (P < 0.001). Specifically, for every 1 kg fat lost during the weight-loss intervention, 0.26 kg lean tissue was lost; for every 1 kg fat regained over the following year, only 0.12 kg lean tissue was regained. Although not all postmenopausal women who intentionally lose weight will regain it within 1 y, the data suggest that fat mass is regained to a greater degree than is lean mass in those who do experience some weight regain. The health ramifications of our findings remain to be seen.

Lean body mass and creatine kinase are associated with reduced inflammation in obesity.

PubMed

Bekkelund, Svein I; Jorde, Rolf

2017-11-01

Obesity is associated with inflammation, but the role of lean mass and creatine kinase (CK) on the inflammatory process is less known. We investigated the associations between lean mass, CK and fat mass upon inflammatory parameters in an overweight and obese adult population. Body composition examined by dual-energy X-ray absorptiometry, high-sensitivity C-reactive protein (hs-CRP), erythrocyte sedimentation rate (ESR), CK and supplementary clinical parameters were measured in 454 overweight and obese individuals. This is a secondary analysis from a cohort of obese individuals treated with Vitamin D. Mean age was 47·6 ± 11·4 years and mean body mass index 34·6 ± 3·9 kg/m 2 . Lean mass correlated negatively with hs-CRP (r = -0·127, P = 0·042) and ESR (r = -0·381, P < 0·001). Median lean mass in the lower ESR quartile was significantly higher than in the upper quartile (P < 0·001) but not between lower and upper hs-CRP quartiles (P = 0·114). CK was negatively correlated with hs-CRP (r = -0·151, P < 0·001) and ESR (r = -0·240, P < 0·001). Median CK in the lower hs-CRP and ESR quartiles were significantly higher than in the upper quartiles (P < 0·001 for both). Conversely, fat mass was positively associated with hs-CRP and ESR. Inflammatory parameters were related to reduced lean mass and CK in an overweight and obese population. Hypothetically, lean mass has a favourable effect on obesity-related inflammation, and CK may play a role as an inhibitor of inflammation in obesity. © 2017 Stichting European Society for Clinical Investigation Journal Foundation.